]>
Commit | Line | Data |
---|---|---|
4bd80e12 | 1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
6ec6c43b | 20 | #include <config.h> |
4bd80e12 | 21 | #include "protocol.h" |
22 | ||
f254bc4b | 23 | static const uint32_t devopts[] = { |
4bd80e12 | 24 | SR_CONF_LOGIC_ANALYZER, |
5827f61b BV |
25 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
26 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
27 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
28 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
29 | SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
30 | SR_CONF_EXTERNAL_CLOCK | SR_CONF_GET | SR_CONF_SET, | |
31 | SR_CONF_SWAP | SR_CONF_SET, | |
32 | SR_CONF_RLE | SR_CONF_GET | SR_CONF_SET, | |
4bd80e12 | 33 | }; |
34 | ||
acc885c7 BV |
35 | static const int32_t trigger_matches[] = { |
36 | SR_TRIGGER_ZERO, | |
37 | SR_TRIGGER_ONE, | |
38 | SR_TRIGGER_RISING, | |
39 | SR_TRIGGER_FALLING, | |
40 | }; | |
41 | ||
4bd80e12 | 42 | #define STR_PATTERN_NONE "None" |
43 | #define STR_PATTERN_EXTERNAL "External" | |
44 | #define STR_PATTERN_INTERNAL "Internal" | |
45 | ||
46 | /* Supported methods of test pattern outputs */ | |
47 | enum { | |
48 | /** | |
49 | * Capture pins 31:16 (unbuffered wing) output a test pattern | |
50 | * that can captured on pins 0:15. | |
51 | */ | |
52 | PATTERN_EXTERNAL, | |
53 | ||
54 | /** Route test pattern internally to capture buffer. */ | |
55 | PATTERN_INTERNAL, | |
56 | }; | |
57 | ||
58 | static const char *patterns[] = { | |
59 | STR_PATTERN_NONE, | |
60 | STR_PATTERN_EXTERNAL, | |
61 | STR_PATTERN_INTERNAL, | |
62 | }; | |
63 | ||
64 | /* Channels are numbered 0-31 (on the PCB silkscreen). */ | |
53cda65a | 65 | SR_PRIV const char *p_ols_channel_names[] = { |
4bd80e12 | 66 | "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", |
67 | "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", | |
68 | "24", "25", "26", "27", "28", "29", "30", "31", | |
4bd80e12 | 69 | }; |
70 | ||
71 | /* Default supported samplerates, can be overridden by device metadata. */ | |
72 | static const uint64_t samplerates[] = { | |
73 | SR_HZ(10), | |
74 | SR_MHZ(200), | |
75 | SR_HZ(1), | |
76 | }; | |
77 | ||
4f840ce9 | 78 | static GSList *scan(struct sr_dev_driver *di, GSList *options) |
4bd80e12 | 79 | { |
80 | struct sr_dev_inst *sdi; | |
4bd80e12 | 81 | struct dev_context *devc; |
82 | GSList *devices; | |
83 | int ret, i; | |
84 | char buf[70]; | |
85 | int bytes_read; | |
86 | ||
87 | (void)options; | |
88 | ||
4bd80e12 | 89 | devices = NULL; |
90 | ||
91 | /* Allocate memory for our private device context. */ | |
f57d8ffe | 92 | devc = g_malloc0(sizeof(struct dev_context)); |
4bd80e12 | 93 | |
94 | /* Device-specific settings */ | |
b94cff40 | 95 | devc->max_samplebytes = devc->max_samplerate = devc->protocol_version = 0; |
4bd80e12 | 96 | |
97 | /* Acquisition settings */ | |
98 | devc->limit_samples = devc->capture_ratio = 0; | |
99 | devc->trigger_at = -1; | |
100 | devc->channel_mask = 0xffffffff; | |
101 | devc->flag_reg = 0; | |
102 | ||
103 | /* Allocate memory for the incoming ftdi data. */ | |
a95f142e | 104 | devc->ftdi_buf = g_malloc0(FTDI_BUF_SIZE); |
4bd80e12 | 105 | |
106 | /* Allocate memory for the FTDI context (ftdic) and initialize it. */ | |
107 | if (!(devc->ftdic = ftdi_new())) { | |
108 | sr_err("Failed to initialize libftdi."); | |
109 | goto err_free_ftdi_buf;; | |
110 | } | |
111 | ||
112 | /* Try to open the FTDI device */ | |
113 | if (p_ols_open(devc) != SR_OK) { | |
114 | goto err_free_ftdic; | |
115 | } | |
116 | ||
117 | /* The discovery procedure is like this: first send the Reset | |
118 | * command (0x00) 5 times, since the device could be anywhere | |
119 | * in a 5-byte command. Then send the ID command (0x02). | |
120 | * If the device responds with 4 bytes ("OLS1" or "SLA1"), we | |
121 | * have a match. | |
122 | */ | |
123 | ||
124 | ret = SR_OK; | |
125 | for (i = 0; i < 5; i++) { | |
126 | if ((ret = write_shortcommand(devc, CMD_RESET)) != SR_OK) { | |
127 | break; | |
128 | } | |
129 | } | |
130 | if (ret != SR_OK) { | |
131 | sr_err("Could not reset device. Quitting."); | |
132 | goto err_close_ftdic; | |
133 | } | |
134 | write_shortcommand(devc, CMD_ID); | |
135 | ||
136 | /* Read the response data. */ | |
137 | bytes_read = ftdi_read_data(devc->ftdic, (uint8_t *)buf, 4); | |
138 | if (bytes_read < 0) { | |
139 | sr_err("Failed to read FTDI data (%d): %s.", | |
140 | bytes_read, ftdi_get_error_string(devc->ftdic)); | |
141 | goto err_close_ftdic; | |
142 | } | |
143 | if (bytes_read == 0) { | |
144 | goto err_close_ftdic; | |
145 | } | |
146 | ||
147 | if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) | |
148 | goto err_close_ftdic; | |
149 | ||
150 | /* Definitely using the OLS protocol, check if it supports | |
151 | * the metadata command. | |
152 | */ | |
153 | write_shortcommand(devc, CMD_METADATA); | |
154 | ||
155 | /* Read the metadata. */ | |
156 | bytes_read = ftdi_read_data(devc->ftdic, (uint8_t *)buf, 64); | |
157 | if (bytes_read < 0) { | |
158 | sr_err("Failed to read FTDI data (%d): %s.", | |
159 | bytes_read, ftdi_get_error_string(devc->ftdic)); | |
160 | goto err_close_ftdic; | |
161 | } | |
162 | if (bytes_read == 0) { | |
163 | goto err_close_ftdic; | |
164 | } | |
165 | ||
166 | /* Close device. We'll reopen it again when we need it. */ | |
167 | p_ols_close(devc); | |
168 | ||
169 | /* Parse the metadata. */ | |
170 | sdi = p_ols_get_metadata((uint8_t *)buf, bytes_read, devc); | |
4bd80e12 | 171 | |
172 | /* Configure samplerate and divider. */ | |
173 | if (p_ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK) | |
174 | sr_dbg("Failed to set default samplerate (%"PRIu64").", | |
175 | DEFAULT_SAMPLERATE); | |
4bd80e12 | 176 | |
4bd80e12 | 177 | devices = g_slist_append(devices, sdi); |
178 | ||
15a5bfe4 | 179 | return std_scan_complete(di, devices); |
4bd80e12 | 180 | |
181 | err_close_ftdic: | |
182 | p_ols_close(devc); | |
183 | err_free_ftdic: | |
184 | ftdi_free(devc->ftdic); /* NOT free() or g_free()! */ | |
185 | err_free_ftdi_buf: | |
186 | g_free(devc->ftdi_buf); | |
4bd80e12 | 187 | g_free(devc); |
4bd80e12 | 188 | |
189 | return NULL; | |
190 | } | |
191 | ||
4bd80e12 | 192 | static void clear_helper(void *priv) |
193 | { | |
194 | struct dev_context *devc; | |
195 | ||
196 | devc = priv; | |
197 | ||
198 | ftdi_free(devc->ftdic); | |
199 | g_free(devc->ftdi_buf); | |
200 | } | |
201 | ||
4f840ce9 | 202 | static int dev_clear(const struct sr_dev_driver *di) |
4bd80e12 | 203 | { |
204 | return std_dev_clear(di, clear_helper); | |
205 | } | |
206 | ||
584560f1 | 207 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
4bd80e12 | 208 | const struct sr_channel_group *cg) |
209 | { | |
210 | struct dev_context *devc; | |
211 | ||
212 | (void)cg; | |
213 | ||
214 | if (!sdi) | |
215 | return SR_ERR_ARG; | |
216 | ||
217 | devc = sdi->priv; | |
584560f1 | 218 | switch (key) { |
4bd80e12 | 219 | case SR_CONF_SAMPLERATE: |
220 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
221 | break; | |
222 | case SR_CONF_CAPTURE_RATIO: | |
223 | *data = g_variant_new_uint64(devc->capture_ratio); | |
224 | break; | |
225 | case SR_CONF_LIMIT_SAMPLES: | |
226 | *data = g_variant_new_uint64(devc->limit_samples); | |
227 | break; | |
228 | case SR_CONF_PATTERN_MODE: | |
229 | if (devc->flag_reg & FLAG_EXTERNAL_TEST_MODE) | |
230 | *data = g_variant_new_string(STR_PATTERN_EXTERNAL); | |
231 | else if (devc->flag_reg & FLAG_INTERNAL_TEST_MODE) | |
232 | *data = g_variant_new_string(STR_PATTERN_INTERNAL); | |
233 | else | |
234 | *data = g_variant_new_string(STR_PATTERN_NONE); | |
235 | break; | |
236 | case SR_CONF_RLE: | |
237 | *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE); | |
238 | break; | |
239 | case SR_CONF_EXTERNAL_CLOCK: | |
240 | *data = g_variant_new_boolean(devc->flag_reg & FLAG_CLOCK_EXTERNAL ? TRUE : FALSE); | |
241 | break; | |
242 | default: | |
243 | return SR_ERR_NA; | |
244 | } | |
245 | ||
246 | return SR_OK; | |
247 | } | |
248 | ||
584560f1 | 249 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, |
4bd80e12 | 250 | const struct sr_channel_group *cg) |
251 | { | |
252 | struct dev_context *devc; | |
253 | uint16_t flag; | |
254 | uint64_t tmp_u64; | |
255 | int ret; | |
256 | const char *stropt; | |
257 | ||
258 | (void)cg; | |
259 | ||
260 | if (sdi->status != SR_ST_ACTIVE) | |
261 | return SR_ERR_DEV_CLOSED; | |
262 | ||
263 | devc = sdi->priv; | |
264 | ||
584560f1 | 265 | switch (key) { |
4bd80e12 | 266 | case SR_CONF_SAMPLERATE: |
267 | tmp_u64 = g_variant_get_uint64(data); | |
268 | if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1]) | |
269 | return SR_ERR_SAMPLERATE; | |
270 | ret = p_ols_set_samplerate(sdi, g_variant_get_uint64(data)); | |
271 | break; | |
272 | case SR_CONF_LIMIT_SAMPLES: | |
273 | tmp_u64 = g_variant_get_uint64(data); | |
274 | if (tmp_u64 < MIN_NUM_SAMPLES) | |
275 | return SR_ERR; | |
276 | devc->limit_samples = tmp_u64; | |
277 | ret = SR_OK; | |
278 | break; | |
279 | case SR_CONF_CAPTURE_RATIO: | |
280 | devc->capture_ratio = g_variant_get_uint64(data); | |
a5c38703 | 281 | if (devc->capture_ratio < 0 || devc->capture_ratio > 100) |
4bd80e12 | 282 | ret = SR_ERR; |
a5c38703 | 283 | else |
4bd80e12 | 284 | ret = SR_OK; |
285 | break; | |
286 | case SR_CONF_EXTERNAL_CLOCK: | |
287 | if (g_variant_get_boolean(data)) { | |
288 | sr_info("Enabling external clock."); | |
289 | devc->flag_reg |= FLAG_CLOCK_EXTERNAL; | |
290 | } else { | |
291 | sr_info("Disabled external clock."); | |
292 | devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL; | |
293 | } | |
294 | ret = SR_OK; | |
295 | break; | |
296 | case SR_CONF_PATTERN_MODE: | |
297 | stropt = g_variant_get_string(data, NULL); | |
298 | ret = SR_OK; | |
299 | flag = 0xffff; | |
300 | if (!strcmp(stropt, STR_PATTERN_NONE)) { | |
301 | sr_info("Disabling test modes."); | |
302 | flag = 0x0000; | |
303 | }else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) { | |
304 | sr_info("Enabling internal test mode."); | |
305 | flag = FLAG_INTERNAL_TEST_MODE; | |
306 | } else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) { | |
307 | sr_info("Enabling external test mode."); | |
308 | flag = FLAG_EXTERNAL_TEST_MODE; | |
309 | } else { | |
310 | ret = SR_ERR; | |
311 | } | |
312 | if (flag != 0xffff) { | |
313 | devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE); | |
314 | devc->flag_reg |= flag; | |
315 | } | |
316 | break; | |
317 | case SR_CONF_SWAP: | |
318 | if (g_variant_get_boolean(data)) { | |
319 | sr_info("Enabling channel swapping."); | |
320 | devc->flag_reg |= FLAG_SWAP_CHANNELS; | |
321 | } else { | |
322 | sr_info("Disabling channel swapping."); | |
323 | devc->flag_reg &= ~FLAG_SWAP_CHANNELS; | |
324 | } | |
325 | ret = SR_OK; | |
326 | break; | |
327 | ||
328 | case SR_CONF_RLE: | |
329 | if (g_variant_get_boolean(data)) { | |
330 | sr_info("Enabling RLE."); | |
331 | devc->flag_reg |= FLAG_RLE; | |
332 | } else { | |
333 | sr_info("Disabling RLE."); | |
334 | devc->flag_reg &= ~FLAG_RLE; | |
335 | } | |
336 | ret = SR_OK; | |
337 | break; | |
338 | default: | |
339 | ret = SR_ERR_NA; | |
340 | } | |
341 | ||
342 | return ret; | |
343 | } | |
344 | ||
584560f1 | 345 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
4bd80e12 | 346 | const struct sr_channel_group *cg) |
347 | { | |
348 | struct dev_context *devc; | |
349 | GVariant *gvar, *grange[2]; | |
350 | GVariantBuilder gvb; | |
acc885c7 | 351 | int num_pols_changrp, i; |
4bd80e12 | 352 | |
353 | (void)cg; | |
354 | ||
355 | switch (key) { | |
356 | case SR_CONF_DEVICE_OPTIONS: | |
584560f1 | 357 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
f254bc4b | 358 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); |
4bd80e12 | 359 | break; |
360 | case SR_CONF_SAMPLERATE: | |
361 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
362 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates, | |
363 | ARRAY_SIZE(samplerates), sizeof(uint64_t)); | |
364 | g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar); | |
365 | *data = g_variant_builder_end(&gvb); | |
366 | break; | |
acc885c7 BV |
367 | case SR_CONF_TRIGGER_MATCH: |
368 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
369 | trigger_matches, ARRAY_SIZE(trigger_matches), | |
370 | sizeof(int32_t)); | |
4bd80e12 | 371 | break; |
372 | case SR_CONF_PATTERN_MODE: | |
373 | *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns)); | |
374 | break; | |
375 | case SR_CONF_LIMIT_SAMPLES: | |
376 | if (!sdi) | |
377 | return SR_ERR_ARG; | |
378 | devc = sdi->priv; | |
379 | if (devc->flag_reg & FLAG_RLE) | |
380 | return SR_ERR_NA; | |
b94cff40 | 381 | if (devc->max_samplebytes == 0) |
4bd80e12 | 382 | /* Device didn't specify sample memory size in metadata. */ |
383 | return SR_ERR_NA; | |
384 | /* | |
385 | * Channel groups are turned off if no channels in that group are | |
386 | * enabled, making more room for samples for the enabled group. | |
387 | */ | |
acc885c7 BV |
388 | pols_channel_mask(sdi); |
389 | num_pols_changrp = 0; | |
4bd80e12 | 390 | for (i = 0; i < 4; i++) { |
391 | if (devc->channel_mask & (0xff << (i * 8))) | |
acc885c7 | 392 | num_pols_changrp++; |
4bd80e12 | 393 | } |
b94cff40 | 394 | /* 3 channel groups takes as many bytes as 4 channel groups */ |
acc885c7 BV |
395 | if (num_pols_changrp == 3) |
396 | num_pols_changrp = 4; | |
4bd80e12 | 397 | grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES); |
acc885c7 BV |
398 | if (num_pols_changrp) |
399 | grange[1] = g_variant_new_uint64(devc->max_samplebytes / num_pols_changrp); | |
400 | else | |
401 | grange[1] = g_variant_new_uint64(MIN_NUM_SAMPLES); | |
4bd80e12 | 402 | *data = g_variant_new_tuple(grange, 2); |
403 | break; | |
404 | default: | |
405 | return SR_ERR_NA; | |
406 | } | |
407 | ||
408 | return SR_OK; | |
409 | } | |
410 | ||
411 | static int dev_open(struct sr_dev_inst *sdi) | |
412 | { | |
413 | struct dev_context *devc; | |
4bd80e12 | 414 | |
415 | devc = sdi->priv; | |
416 | ||
417 | if (p_ols_open(devc) != SR_OK) { | |
418 | return SR_ERR; | |
419 | } else { | |
dcd438ee | 420 | sdi->status = SR_ST_ACTIVE; |
4bd80e12 | 421 | return SR_OK; |
422 | } | |
423 | } | |
424 | ||
425 | static int dev_close(struct sr_dev_inst *sdi) | |
426 | { | |
427 | int ret; | |
428 | struct dev_context *devc; | |
429 | ||
430 | ret = SR_OK; | |
431 | devc = sdi->priv; | |
432 | ||
433 | if (sdi->status == SR_ST_ACTIVE) { | |
434 | sr_dbg("Status ACTIVE, closing device."); | |
435 | ret = p_ols_close(devc); | |
436 | } else { | |
437 | sr_spew("Status not ACTIVE, nothing to do."); | |
438 | } | |
439 | ||
440 | sdi->status = SR_ST_INACTIVE; | |
441 | ||
442 | return ret; | |
443 | } | |
444 | ||
4bd80e12 | 445 | static int set_trigger(const struct sr_dev_inst *sdi, int stage) |
446 | { | |
447 | struct dev_context *devc; | |
448 | uint8_t cmd, arg[4]; | |
449 | ||
450 | devc = sdi->priv; | |
451 | ||
452 | cmd = CMD_SET_TRIGGER_MASK + stage * 4; | |
453 | arg[0] = devc->trigger_mask[stage] & 0xff; | |
454 | arg[1] = (devc->trigger_mask[stage] >> 8) & 0xff; | |
455 | arg[2] = (devc->trigger_mask[stage] >> 16) & 0xff; | |
456 | arg[3] = (devc->trigger_mask[stage] >> 24) & 0xff; | |
457 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
458 | return SR_ERR; | |
459 | ||
460 | cmd = CMD_SET_TRIGGER_VALUE + stage * 4; | |
461 | arg[0] = devc->trigger_value[stage] & 0xff; | |
462 | arg[1] = (devc->trigger_value[stage] >> 8) & 0xff; | |
463 | arg[2] = (devc->trigger_value[stage] >> 16) & 0xff; | |
464 | arg[3] = (devc->trigger_value[stage] >> 24) & 0xff; | |
465 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
466 | return SR_ERR; | |
467 | ||
468 | cmd = CMD_SET_TRIGGER_CONFIG + stage * 4; | |
469 | arg[0] = arg[1] = arg[3] = 0x00; | |
470 | arg[2] = stage; | |
471 | if (stage == devc->num_stages) | |
472 | /* Last stage, fire when this one matches. */ | |
473 | arg[3] |= TRIGGER_START; | |
474 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
475 | return SR_ERR; | |
476 | ||
1e0de846 | 477 | cmd = CMD_SET_TRIGGER_EDGE + stage * 4; |
478 | arg[0] = devc->trigger_edge[stage] & 0xff; | |
479 | arg[1] = (devc->trigger_edge[stage] >> 8) & 0xff; | |
480 | arg[2] = (devc->trigger_edge[stage] >> 16) & 0xff; | |
481 | arg[3] = (devc->trigger_edge[stage] >> 24) & 0xff; | |
482 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
483 | return SR_ERR; | |
484 | ||
4bd80e12 | 485 | return SR_OK; |
486 | } | |
487 | ||
84cbaf77 BV |
488 | static int disable_trigger(const struct sr_dev_inst *sdi, int stage) |
489 | { | |
490 | struct dev_context *devc; | |
491 | uint8_t cmd, arg[4]; | |
492 | ||
493 | devc = sdi->priv; | |
494 | ||
495 | cmd = CMD_SET_TRIGGER_MASK + stage * 4; | |
496 | arg[0] = arg[1] = arg[2] = arg[3] = 0x00; | |
497 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
498 | return SR_ERR; | |
499 | ||
500 | cmd = CMD_SET_TRIGGER_VALUE + stage * 4; | |
501 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
502 | return SR_ERR; | |
503 | ||
504 | cmd = CMD_SET_TRIGGER_CONFIG + stage * 4; | |
505 | arg[2] = 0x03; | |
506 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
507 | return SR_ERR; | |
508 | ||
509 | cmd = CMD_SET_TRIGGER_EDGE + stage * 4; | |
510 | arg[2] = 0x00; | |
511 | if (write_longcommand(devc, cmd, arg) != SR_OK) | |
512 | return SR_ERR; | |
513 | ||
514 | return SR_OK; | |
515 | } | |
516 | ||
695dc859 | 517 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
4bd80e12 | 518 | { |
519 | struct dev_context *devc; | |
520 | uint32_t samplecount, readcount, delaycount; | |
acc885c7 | 521 | uint8_t pols_changrp_mask, arg[4]; |
b94cff40 | 522 | uint16_t flag_tmp; |
acc885c7 | 523 | int num_pols_changrp, samplespercount; |
4bd80e12 | 524 | int ret, i; |
525 | ||
526 | if (sdi->status != SR_ST_ACTIVE) | |
527 | return SR_ERR_DEV_CLOSED; | |
528 | ||
529 | devc = sdi->priv; | |
530 | ||
acc885c7 | 531 | pols_channel_mask(sdi); |
4bd80e12 | 532 | |
533 | /* | |
534 | * Enable/disable channel groups in the flag register according to the | |
acc885c7 BV |
535 | * channel mask. Calculate this here, because num_pols_changrp is |
536 | * needed to limit readcount. | |
4bd80e12 | 537 | */ |
acc885c7 BV |
538 | pols_changrp_mask = 0; |
539 | num_pols_changrp = 0; | |
4bd80e12 | 540 | for (i = 0; i < 4; i++) { |
541 | if (devc->channel_mask & (0xff << (i * 8))) { | |
acc885c7 BV |
542 | pols_changrp_mask |= (1 << i); |
543 | num_pols_changrp++; | |
4bd80e12 | 544 | } |
545 | } | |
b94cff40 | 546 | /* 3 channel groups takes as many bytes as 4 channel groups */ |
acc885c7 BV |
547 | if (num_pols_changrp == 3) |
548 | num_pols_changrp = 4; | |
b94cff40 | 549 | /* maximum number of samples (or RLE counts) the buffer memory can hold */ |
acc885c7 | 550 | devc->max_samples = devc->max_samplebytes / num_pols_changrp; |
4bd80e12 | 551 | |
552 | /* | |
553 | * Limit readcount to prevent reading past the end of the hardware | |
554 | * buffer. | |
555 | */ | |
556 | sr_dbg("max_samples = %d", devc->max_samples); | |
6433156c | 557 | sr_dbg("limit_samples = %" PRIu64, devc->limit_samples); |
b94cff40 | 558 | samplecount = MIN(devc->max_samples, devc->limit_samples); |
4bd80e12 | 559 | sr_dbg("Samplecount = %d", samplecount); |
560 | ||
b94cff40 | 561 | /* In demux mode the OLS is processing two samples per clock */ |
562 | if (devc->flag_reg & FLAG_DEMUX) { | |
563 | samplespercount = 8; | |
564 | } | |
565 | else { | |
566 | samplespercount = 4; | |
567 | } | |
568 | ||
569 | readcount = samplecount / samplespercount; | |
570 | ||
4bd80e12 | 571 | /* Rather read too many samples than too few. */ |
b94cff40 | 572 | if (samplecount % samplespercount != 0) |
4bd80e12 | 573 | readcount++; |
574 | ||
575 | /* Basic triggers. */ | |
acc885c7 BV |
576 | if (pols_convert_trigger(sdi) != SR_OK) { |
577 | sr_err("Failed to configure channels."); | |
578 | return SR_ERR; | |
579 | } | |
84cbaf77 | 580 | |
acc885c7 | 581 | if (devc->num_stages > 0) { |
4bd80e12 | 582 | delaycount = readcount * (1 - devc->capture_ratio / 100.0); |
b94cff40 | 583 | devc->trigger_at = (readcount - delaycount) * samplespercount - devc->num_stages; |
84cbaf77 BV |
584 | for (i = 0; i < NUM_TRIGGER_STAGES; i++) { |
585 | if (i <= devc->num_stages) { | |
586 | sr_dbg("Setting p-ols stage %d trigger.", i); | |
587 | if ((ret = set_trigger(sdi, i)) != SR_OK) | |
588 | return ret; | |
589 | } | |
590 | else { | |
591 | sr_dbg("Disabling p-ols stage %d trigger.", i); | |
592 | if ((ret = disable_trigger(sdi, i)) != SR_OK) | |
593 | return ret; | |
594 | } | |
4bd80e12 | 595 | } |
596 | } else { | |
597 | /* No triggers configured, force trigger on first stage. */ | |
598 | sr_dbg("Forcing trigger at stage 0."); | |
599 | if ((ret = set_trigger(sdi, 0)) != SR_OK) | |
600 | return ret; | |
601 | delaycount = readcount; | |
602 | } | |
603 | ||
604 | /* Samplerate. */ | |
605 | sr_dbg("Setting samplerate to %" PRIu64 "Hz (divider %u)", | |
606 | devc->cur_samplerate, devc->cur_samplerate_divider); | |
607 | arg[0] = devc->cur_samplerate_divider & 0xff; | |
608 | arg[1] = (devc->cur_samplerate_divider & 0xff00) >> 8; | |
609 | arg[2] = (devc->cur_samplerate_divider & 0xff0000) >> 16; | |
610 | arg[3] = 0x00; | |
611 | if (write_longcommand(devc, CMD_SET_DIVIDER, arg) != SR_OK) | |
612 | return SR_ERR; | |
acc885c7 | 613 | |
4bd80e12 | 614 | /* Send extended sample limit and pre/post-trigger capture ratio. */ |
615 | arg[0] = ((readcount - 1) & 0xff); | |
616 | arg[1] = ((readcount - 1) & 0xff00) >> 8; | |
617 | arg[2] = ((readcount - 1) & 0xff0000) >> 16; | |
618 | arg[3] = ((readcount - 1) & 0xff000000) >> 24; | |
1e0de846 | 619 | if (write_longcommand(devc, CMD_CAPTURE_DELAY, arg) != SR_OK) |
4bd80e12 | 620 | return SR_ERR; |
621 | arg[0] = ((delaycount - 1) & 0xff); | |
622 | arg[1] = ((delaycount - 1) & 0xff00) >> 8; | |
623 | arg[2] = ((delaycount - 1) & 0xff0000) >> 16; | |
624 | arg[3] = ((delaycount - 1) & 0xff000000) >> 24; | |
1e0de846 | 625 | if (write_longcommand(devc, CMD_CAPTURE_COUNT, arg) != SR_OK) |
4bd80e12 | 626 | return SR_ERR; |
acc885c7 | 627 | |
4bd80e12 | 628 | /* Flag register. */ |
629 | sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s", | |
630 | devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off", | |
631 | devc->flag_reg & FLAG_EXTERNAL_TEST_MODE ? "on": "off", | |
632 | devc->flag_reg & FLAG_RLE ? "on" : "off", | |
633 | devc->flag_reg & FLAG_FILTER ? "on": "off", | |
634 | devc->flag_reg & FLAG_DEMUX ? "on" : "off"); | |
635 | ||
b94cff40 | 636 | /* |
637 | * Enable/disable OLS channel groups in the flag register according | |
638 | * to the channel mask. 1 means "disable channel". | |
639 | */ | |
640 | devc->flag_reg &= ~0x3c; | |
acc885c7 | 641 | devc->flag_reg |= ~(pols_changrp_mask << 2) & 0x3c; |
b94cff40 | 642 | sr_dbg("flag_reg = %x", devc->flag_reg); |
643 | ||
644 | /* | |
645 | * In demux mode the OLS is processing two 8-bit or 16-bit samples | |
646 | * in parallel and for this to work the lower two bits of the four | |
647 | * "channel_disable" bits must be replicated to the upper two bits. | |
648 | */ | |
649 | flag_tmp = devc->flag_reg; | |
650 | if (devc->flag_reg & FLAG_DEMUX) { | |
651 | flag_tmp &= ~0x30; | |
acc885c7 | 652 | flag_tmp |= ~(pols_changrp_mask << 4) & 0x30; |
b94cff40 | 653 | } |
654 | arg[0] = flag_tmp & 0xff; | |
655 | arg[1] = flag_tmp >> 8; | |
4bd80e12 | 656 | arg[2] = arg[3] = 0x00; |
657 | if (write_longcommand(devc, CMD_SET_FLAGS, arg) != SR_OK) | |
658 | return SR_ERR; | |
659 | ||
660 | /* Start acquisition on the device. */ | |
661 | if (write_shortcommand(devc, CMD_RUN) != SR_OK) | |
662 | return SR_ERR; | |
663 | ||
664 | /* Reset all operational states. */ | |
665 | devc->rle_count = devc->num_transfers = 0; | |
666 | devc->num_samples = devc->num_bytes = 0; | |
667 | devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0; | |
668 | memset(devc->sample, 0, 4); | |
669 | ||
bee2b016 | 670 | std_session_send_df_header(sdi); |
4bd80e12 | 671 | |
672 | /* Hook up a dummy handler to receive data from the device. */ | |
c650d3ec | 673 | sr_session_source_add(sdi->session, -1, 0, 10, p_ols_receive_data, |
695dc859 | 674 | (struct sr_dev_inst *)sdi); |
4bd80e12 | 675 | |
676 | return SR_OK; | |
677 | } | |
678 | ||
695dc859 | 679 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) |
4bd80e12 | 680 | { |
681 | struct dev_context *devc; | |
4bd80e12 | 682 | |
683 | devc = sdi->priv; | |
684 | ||
685 | sr_dbg("Stopping acquisition."); | |
686 | write_shortcommand(devc, CMD_RESET); | |
687 | write_shortcommand(devc, CMD_RESET); | |
688 | write_shortcommand(devc, CMD_RESET); | |
689 | write_shortcommand(devc, CMD_RESET); | |
690 | write_shortcommand(devc, CMD_RESET); | |
691 | ||
dd7a4a71 | 692 | sr_session_source_remove(sdi->session, -1); |
4bd80e12 | 693 | |
bee2b016 | 694 | std_session_send_df_end(sdi); |
4bd80e12 | 695 | |
696 | return SR_OK; | |
697 | } | |
698 | ||
699 | SR_PRIV struct sr_dev_driver p_ols_driver_info = { | |
acc885c7 | 700 | .name = "p-ols", |
4bd80e12 | 701 | .longname = "Pipistrello OLS", |
702 | .api_version = 1, | |
c2fdcc25 | 703 | .init = std_init, |
700d6b64 | 704 | .cleanup = std_cleanup, |
4bd80e12 | 705 | .scan = scan, |
c01bf34c | 706 | .dev_list = std_dev_list, |
4bd80e12 | 707 | .dev_clear = dev_clear, |
708 | .config_get = config_get, | |
709 | .config_set = config_set, | |
710 | .config_list = config_list, | |
711 | .dev_open = dev_open, | |
712 | .dev_close = dev_close, | |
713 | .dev_acquisition_start = dev_acquisition_start, | |
714 | .dev_acquisition_stop = dev_acquisition_stop, | |
41812aca | 715 | .context = NULL, |
4bd80e12 | 716 | }; |
dd5c48a6 | 717 | SR_REGISTER_DEV_DRIVER(p_ols_driver_info); |