]>
Commit | Line | Data |
---|---|---|
e3b83c5e SS |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2017 Sven Schnelle <svens@stackframe.org> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include <config.h> | |
3f2c7c94 SS |
21 | #include <stdlib.h> |
22 | #include "scpi.h" | |
e3b83c5e SS |
23 | #include "protocol.h" |
24 | ||
3f2c7c94 SS |
25 | static struct sr_dev_driver lecroy_xstream_driver_info; |
26 | ||
27 | static const char *manufacturers[] = { | |
28 | "LECROY", | |
29 | }; | |
30 | ||
31 | static const uint32_t scanopts[] = { | |
32 | SR_CONF_CONN, | |
33 | }; | |
34 | ||
90230cfa SA |
35 | static const uint32_t drvopts[] = { |
36 | SR_CONF_OSCILLOSCOPE, | |
37 | }; | |
38 | ||
39 | static const uint32_t devopts[] = { | |
40 | SR_CONF_LIMIT_FRAMES | SR_CONF_GET | SR_CONF_SET, | |
86621306 | 41 | SR_CONF_SAMPLERATE | SR_CONF_GET, |
90230cfa SA |
42 | SR_CONF_TIMEBASE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
43 | SR_CONF_NUM_HDIV | SR_CONF_GET, | |
90230cfa | 44 | SR_CONF_HORIZ_TRIGGERPOS | SR_CONF_GET | SR_CONF_SET, |
86621306 UH |
45 | SR_CONF_TRIGGER_SOURCE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
46 | SR_CONF_TRIGGER_SLOPE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
90230cfa SA |
47 | }; |
48 | ||
49 | static const uint32_t analog_devopts[] = { | |
50 | SR_CONF_NUM_VDIV | SR_CONF_GET, | |
90230cfa | 51 | SR_CONF_VDIV | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
86621306 | 52 | SR_CONF_COUPLING | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
90230cfa SA |
53 | }; |
54 | ||
3f2c7c94 SS |
55 | static int check_manufacturer(const char *manufacturer) |
56 | { | |
57 | unsigned int i; | |
58 | ||
59 | for (i = 0; i < ARRAY_SIZE(manufacturers); i++) | |
60 | if (!strcmp(manufacturer, manufacturers[i])) | |
61 | return SR_OK; | |
62 | ||
63 | return SR_ERR; | |
64 | } | |
65 | ||
66 | static struct sr_dev_inst *probe_serial_device(struct sr_scpi_dev_inst *scpi) | |
67 | { | |
68 | struct sr_dev_inst *sdi; | |
69 | struct dev_context *devc; | |
70 | struct sr_scpi_hw_info *hw_info; | |
71 | ||
72 | sdi = NULL; | |
73 | devc = NULL; | |
74 | hw_info = NULL; | |
75 | ||
3f2c7c94 SS |
76 | if (sr_scpi_get_hw_id(scpi, &hw_info) != SR_OK) { |
77 | sr_info("Couldn't get IDN response."); | |
78 | goto fail; | |
79 | } | |
80 | ||
81 | if (check_manufacturer(hw_info->manufacturer) != SR_OK) | |
82 | goto fail; | |
83 | ||
84 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
85 | sdi->vendor = g_strdup(hw_info->manufacturer); | |
86 | sdi->model = g_strdup(hw_info->model); | |
87 | sdi->version = g_strdup(hw_info->firmware_version); | |
88 | sdi->serial_num = g_strdup(hw_info->serial_number); | |
89 | sdi->driver = &lecroy_xstream_driver_info; | |
90 | sdi->inst_type = SR_INST_SCPI; | |
91 | sdi->conn = scpi; | |
92 | ||
93 | sr_scpi_hw_info_free(hw_info); | |
94 | hw_info = NULL; | |
95 | ||
96 | devc = g_malloc0(sizeof(struct dev_context)); | |
97 | ||
98 | sdi->priv = devc; | |
99 | ||
100 | if (lecroy_xstream_init_device(sdi) != SR_OK) | |
101 | goto fail; | |
102 | ||
103 | return sdi; | |
104 | ||
105 | fail: | |
106 | sr_scpi_hw_info_free(hw_info); | |
4bf93988 | 107 | sr_dev_inst_free(sdi); |
3f2c7c94 SS |
108 | g_free(devc); |
109 | ||
110 | return NULL; | |
111 | } | |
e3b83c5e SS |
112 | |
113 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
114 | { | |
3f2c7c94 SS |
115 | return sr_scpi_scan(di->context, options, probe_serial_device); |
116 | } | |
117 | ||
3553451f | 118 | static void clear_helper(struct dev_context *devc) |
3f2c7c94 | 119 | { |
3f2c7c94 | 120 | lecroy_xstream_state_free(devc->model_state); |
3f2c7c94 | 121 | g_free(devc->analog_groups); |
e3b83c5e SS |
122 | } |
123 | ||
124 | static int dev_clear(const struct sr_dev_driver *di) | |
125 | { | |
3553451f | 126 | return std_dev_clear_with_callback(di, (std_dev_clear_callback)clear_helper); |
e3b83c5e SS |
127 | } |
128 | ||
129 | static int dev_open(struct sr_dev_inst *sdi) | |
130 | { | |
6402c379 | 131 | if (sr_scpi_open(sdi->conn) != SR_OK) |
3f2c7c94 | 132 | return SR_ERR; |
e3b83c5e | 133 | |
3f2c7c94 SS |
134 | if (lecroy_xstream_state_get(sdi) != SR_OK) |
135 | return SR_ERR; | |
e3b83c5e | 136 | |
e3b83c5e SS |
137 | return SR_OK; |
138 | } | |
139 | ||
140 | static int dev_close(struct sr_dev_inst *sdi) | |
141 | { | |
f1ba6b4b | 142 | return sr_scpi_close(sdi->conn); |
e3b83c5e SS |
143 | } |
144 | ||
145 | static int config_get(uint32_t key, GVariant **data, | |
ea257cdc | 146 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) |
e3b83c5e | 147 | { |
3f2c7c94 SS |
148 | unsigned int i; |
149 | struct dev_context *devc; | |
150 | const struct scope_config *model; | |
151 | struct scope_state *state; | |
e3b83c5e | 152 | |
3f2c7c94 SS |
153 | if (!sdi) |
154 | return SR_ERR_ARG; | |
155 | ||
156 | devc = sdi->priv; | |
e3b83c5e | 157 | |
3f2c7c94 SS |
158 | model = devc->model_config; |
159 | state = devc->model_state; | |
160 | *data = NULL; | |
ea257cdc | 161 | |
e3b83c5e | 162 | switch (key) { |
3f2c7c94 SS |
163 | case SR_CONF_NUM_HDIV: |
164 | *data = g_variant_new_int32(model->num_xdivs); | |
3f2c7c94 SS |
165 | break; |
166 | case SR_CONF_TIMEBASE: | |
167 | *data = g_variant_new("(tt)", | |
ea257cdc UH |
168 | model->timebases[state->timebase].p, |
169 | model->timebases[state->timebase].q); | |
3f2c7c94 SS |
170 | break; |
171 | case SR_CONF_NUM_VDIV: | |
172 | for (i = 0; i < model->analog_channels; i++) { | |
173 | if (cg != devc->analog_groups[i]) | |
174 | continue; | |
175 | *data = g_variant_new_int32(model->num_ydivs); | |
3f2c7c94 SS |
176 | } |
177 | break; | |
178 | case SR_CONF_VDIV: | |
179 | for (i = 0; i < model->analog_channels; i++) { | |
180 | if (cg != devc->analog_groups[i]) | |
181 | continue; | |
182 | *data = g_variant_new("(tt)", | |
ea257cdc UH |
183 | model->vdivs[state->analog_channels[i].vdiv].p, |
184 | model->vdivs[state->analog_channels[i].vdiv].q); | |
3f2c7c94 SS |
185 | } |
186 | break; | |
187 | case SR_CONF_TRIGGER_SOURCE: | |
188 | *data = g_variant_new_string((*model->trigger_sources)[state->trigger_source]); | |
3f2c7c94 SS |
189 | break; |
190 | case SR_CONF_TRIGGER_SLOPE: | |
191 | *data = g_variant_new_string((*model->trigger_slopes)[state->trigger_slope]); | |
3f2c7c94 SS |
192 | break; |
193 | case SR_CONF_HORIZ_TRIGGERPOS: | |
194 | *data = g_variant_new_double(state->horiz_triggerpos); | |
3f2c7c94 SS |
195 | break; |
196 | case SR_CONF_COUPLING: | |
3f2c7c94 | 197 | for (i = 0; i < model->analog_channels; i++) { |
ea257cdc | 198 | if (cg != devc->analog_groups[i]) |
3f2c7c94 | 199 | continue; |
3f2c7c94 | 200 | *data = g_variant_new_string((*model->coupling_options)[state->analog_channels[i].coupling]); |
3f2c7c94 SS |
201 | } |
202 | break; | |
203 | case SR_CONF_SAMPLERATE: | |
204 | *data = g_variant_new_uint64(state->sample_rate); | |
3f2c7c94 SS |
205 | break; |
206 | case SR_CONF_ENABLED: | |
207 | *data = g_variant_new_boolean(FALSE); | |
3f2c7c94 | 208 | break; |
e3b83c5e | 209 | default: |
a9010323 | 210 | return SR_ERR_NA; |
e3b83c5e | 211 | } |
ea257cdc | 212 | |
a9010323 | 213 | return SR_OK; |
e3b83c5e SS |
214 | } |
215 | ||
3f2c7c94 SS |
216 | static GVariant *build_tuples(const struct sr_rational *array, unsigned int n) |
217 | { | |
218 | unsigned int i; | |
219 | GVariant *rational[2]; | |
220 | GVariantBuilder gvb; | |
221 | ||
222 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
223 | ||
224 | for (i = 0; i < n; i++) { | |
225 | rational[0] = g_variant_new_uint64(array[i].p); | |
226 | rational[1] = g_variant_new_uint64(array[i].q); | |
227 | ||
228 | /* FIXME: Valgrind reports a memory leak here. */ | |
229 | g_variant_builder_add_value(&gvb, g_variant_new_tuple(rational, 2)); | |
230 | } | |
231 | ||
232 | return g_variant_builder_end(&gvb); | |
233 | } | |
234 | ||
ea257cdc UH |
235 | static int config_set(uint32_t key, GVariant *data, |
236 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
e3b83c5e SS |
237 | { |
238 | int ret; | |
3f2c7c94 SS |
239 | unsigned int i, j; |
240 | char command[MAX_COMMAND_SIZE]; | |
241 | struct dev_context *devc; | |
242 | const struct scope_config *model; | |
243 | struct scope_state *state; | |
244 | const char *tmp; | |
245 | int64_t p; | |
246 | uint64_t q; | |
247 | double tmp_d; | |
248 | gboolean update_sample_rate; | |
e3b83c5e | 249 | |
3f2c7c94 SS |
250 | if (!sdi) |
251 | return SR_ERR_ARG; | |
e3b83c5e | 252 | |
3f2c7c94 SS |
253 | devc = sdi->priv; |
254 | ||
255 | model = devc->model_config; | |
256 | state = devc->model_state; | |
257 | update_sample_rate = FALSE; | |
258 | ||
259 | ret = SR_ERR_NA; | |
e3b83c5e | 260 | |
e3b83c5e | 261 | switch (key) { |
3f2c7c94 SS |
262 | case SR_CONF_LIMIT_FRAMES: |
263 | devc->frame_limit = g_variant_get_uint64(data); | |
264 | ret = SR_OK; | |
265 | break; | |
266 | case SR_CONF_TRIGGER_SOURCE: | |
267 | tmp = g_variant_get_string(data, NULL); | |
268 | for (i = 0; (*model->trigger_sources)[i]; i++) { | |
269 | if (g_strcmp0(tmp, (*model->trigger_sources)[i]) != 0) | |
270 | continue; | |
271 | state->trigger_source = i; | |
272 | g_snprintf(command, sizeof(command), | |
273 | "SET TRIGGER SOURCE %s", | |
274 | (*model->trigger_sources)[i]); | |
275 | ||
276 | ret = sr_scpi_send(sdi->conn, command); | |
277 | break; | |
278 | } | |
279 | break; | |
280 | case SR_CONF_VDIV: | |
281 | g_variant_get(data, "(tt)", &p, &q); | |
282 | ||
283 | for (i = 0; i < model->num_vdivs; i++) { | |
284 | if (p != model->vdivs[i].p || q != model->vdivs[i].q) | |
285 | continue; | |
286 | for (j = 1; j <= model->analog_channels; j++) { | |
287 | if (cg != devc->analog_groups[j - 1]) | |
288 | continue; | |
289 | state->analog_channels[j - 1].vdiv = i; | |
290 | g_snprintf(command, sizeof(command), | |
291 | "C%d:VDIV %E", j, (float)p/q); | |
292 | ||
293 | if (sr_scpi_send(sdi->conn, command) != SR_OK || | |
294 | sr_scpi_get_opc(sdi->conn) != SR_OK) | |
295 | return SR_ERR; | |
296 | ||
297 | break; | |
298 | } | |
299 | ||
300 | ret = SR_OK; | |
301 | break; | |
302 | } | |
303 | break; | |
304 | case SR_CONF_TIMEBASE: | |
305 | g_variant_get(data, "(tt)", &p, &q); | |
306 | ||
307 | for (i = 0; i < model->num_timebases; i++) { | |
308 | if (p != model->timebases[i].p || | |
309 | q != model->timebases[i].q) | |
310 | continue; | |
311 | state->timebase = i; | |
312 | g_snprintf(command, sizeof(command), | |
313 | "TIME_DIV %E", (float)p/q); | |
314 | ||
315 | ret = sr_scpi_send(sdi->conn, command); | |
316 | update_sample_rate = TRUE; | |
317 | break; | |
318 | } | |
319 | break; | |
320 | case SR_CONF_HORIZ_TRIGGERPOS: | |
321 | tmp_d = g_variant_get_double(data); | |
322 | ||
323 | if (tmp_d < 0.0 || tmp_d > 1.0) | |
324 | return SR_ERR; | |
325 | ||
326 | state->horiz_triggerpos = tmp_d; | |
327 | tmp_d = -(tmp_d - 0.5) * | |
328 | ((double)model->timebases[state->timebase].p / | |
329 | model->timebases[state->timebase].q) | |
330 | * model->num_xdivs; | |
331 | ||
332 | g_snprintf(command, sizeof(command), "TRIG POS %e S", tmp_d); | |
333 | ||
334 | ret = sr_scpi_send(sdi->conn, command); | |
335 | break; | |
336 | case SR_CONF_TRIGGER_SLOPE: | |
337 | tmp = g_variant_get_string(data, NULL); | |
338 | for (i = 0; (*model->trigger_slopes)[i]; i++) { | |
339 | if (g_strcmp0(tmp, (*model->trigger_slopes)[i]) != 0) | |
340 | continue; | |
341 | state->trigger_slope = i; | |
342 | g_snprintf(command, sizeof(command), | |
343 | "SET TRIGGER SLOPE %s", | |
344 | (*model->trigger_slopes)[i]); | |
345 | ||
346 | ret = sr_scpi_send(sdi->conn, command); | |
347 | break; | |
348 | } | |
349 | break; | |
350 | case SR_CONF_COUPLING: | |
3f2c7c94 SS |
351 | tmp = g_variant_get_string(data, NULL); |
352 | ||
353 | for (i = 0; (*model->coupling_options)[i]; i++) { | |
354 | if (strcmp(tmp, (*model->coupling_options)[i]) != 0) | |
355 | continue; | |
356 | for (j = 1; j <= model->analog_channels; j++) { | |
357 | if (cg != devc->analog_groups[j - 1]) | |
358 | continue; | |
ea257cdc | 359 | state->analog_channels[j - 1].coupling = i; |
3f2c7c94 SS |
360 | |
361 | g_snprintf(command, sizeof(command), | |
362 | "C%d:COUPLING %s", j, tmp); | |
363 | ||
364 | if (sr_scpi_send(sdi->conn, command) != SR_OK || | |
365 | sr_scpi_get_opc(sdi->conn) != SR_OK) | |
366 | return SR_ERR; | |
367 | break; | |
368 | } | |
369 | ||
370 | ret = SR_OK; | |
371 | break; | |
372 | } | |
373 | break; | |
e3b83c5e SS |
374 | default: |
375 | ret = SR_ERR_NA; | |
3f2c7c94 | 376 | break; |
e3b83c5e SS |
377 | } |
378 | ||
3f2c7c94 SS |
379 | if (ret == SR_OK) |
380 | ret = sr_scpi_get_opc(sdi->conn); | |
381 | ||
382 | if (ret == SR_OK && update_sample_rate) | |
383 | ret = lecroy_xstream_update_sample_rate(sdi); | |
384 | ||
e3b83c5e SS |
385 | return ret; |
386 | } | |
387 | ||
ea257cdc UH |
388 | static int config_list(uint32_t key, GVariant **data, |
389 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
e3b83c5e | 390 | { |
e66d1892 UH |
391 | struct dev_context *devc; |
392 | const struct scope_config *model; | |
90230cfa | 393 | |
e66d1892 UH |
394 | devc = (sdi) ? sdi->priv : NULL; |
395 | model = (devc) ? devc->model_config : NULL; | |
90230cfa SA |
396 | |
397 | switch (key) { | |
e66d1892 UH |
398 | case SR_CONF_SCAN_OPTIONS: |
399 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, NULL, NULL); | |
3f2c7c94 | 400 | case SR_CONF_DEVICE_OPTIONS: |
e66d1892 UH |
401 | if (!cg) |
402 | return STD_CONFIG_LIST(key, data, sdi, cg, NULL, drvopts, devopts); | |
3f2c7c94 | 403 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
90230cfa | 404 | analog_devopts, ARRAY_SIZE(analog_devopts), |
ea257cdc | 405 | sizeof(uint32_t)); |
3f2c7c94 SS |
406 | break; |
407 | case SR_CONF_COUPLING: | |
408 | *data = g_variant_new_strv(*model->coupling_options, | |
409 | g_strv_length((char **)*model->coupling_options)); | |
410 | break; | |
411 | case SR_CONF_TRIGGER_SOURCE: | |
412 | if (!model) | |
413 | return SR_ERR_ARG; | |
414 | *data = g_variant_new_strv(*model->trigger_sources, | |
415 | g_strv_length((char **)*model->trigger_sources)); | |
416 | break; | |
417 | case SR_CONF_TRIGGER_SLOPE: | |
418 | if (!model) | |
419 | return SR_ERR_ARG; | |
420 | *data = g_variant_new_strv(*model->trigger_slopes, | |
421 | g_strv_length((char **)*model->trigger_slopes)); | |
422 | break; | |
423 | case SR_CONF_TIMEBASE: | |
424 | if (!model) | |
425 | return SR_ERR_ARG; | |
426 | *data = build_tuples(model->timebases, model->num_timebases); | |
427 | break; | |
428 | case SR_CONF_VDIV: | |
429 | if (!model) | |
430 | return SR_ERR_ARG; | |
431 | *data = build_tuples(model->vdivs, model->num_vdivs); | |
432 | break; | |
e3b83c5e SS |
433 | default: |
434 | return SR_ERR_NA; | |
435 | } | |
3f2c7c94 SS |
436 | return SR_OK; |
437 | } | |
e3b83c5e | 438 | |
3f2c7c94 SS |
439 | SR_PRIV int lecroy_xstream_request_data(const struct sr_dev_inst *sdi) |
440 | { | |
441 | char command[MAX_COMMAND_SIZE]; | |
442 | struct sr_channel *ch; | |
443 | struct dev_context *devc; | |
444 | ||
445 | devc = sdi->priv; | |
446 | ||
447 | ch = devc->current_channel->data; | |
448 | ||
449 | if (ch->type != SR_CHANNEL_ANALOG) | |
450 | return SR_ERR; | |
451 | ||
452 | g_snprintf(command, sizeof(command), | |
ea257cdc | 453 | "COMM_FORMAT DEF9,WORD,BIN;C%d:WAVEFORM?", ch->index + 1); |
3f2c7c94 SS |
454 | return sr_scpi_send(sdi->conn, command); |
455 | } | |
456 | ||
6d13a46c | 457 | static int setup_channels(const struct sr_dev_inst *sdi) |
3f2c7c94 SS |
458 | { |
459 | GSList *l; | |
460 | gboolean setup_changed; | |
461 | char command[MAX_COMMAND_SIZE]; | |
462 | struct scope_state *state; | |
463 | struct sr_channel *ch; | |
464 | struct dev_context *devc; | |
465 | struct sr_scpi_dev_inst *scpi; | |
466 | ||
467 | devc = sdi->priv; | |
468 | scpi = sdi->conn; | |
469 | state = devc->model_state; | |
470 | setup_changed = FALSE; | |
471 | ||
472 | for (l = sdi->channels; l; l = l->next) { | |
473 | ch = l->data; | |
474 | switch (ch->type) { | |
475 | case SR_CHANNEL_ANALOG: | |
476 | if (ch->enabled == state->analog_channels[ch->index].state) | |
477 | break; | |
478 | g_snprintf(command, sizeof(command), "C%d:TRACE %s", | |
ea257cdc | 479 | ch->index + 1, ch->enabled ? "ON" : "OFF"); |
3f2c7c94 SS |
480 | |
481 | if (sr_scpi_send(scpi, command) != SR_OK) | |
482 | return SR_ERR; | |
483 | state->analog_channels[ch->index].state = ch->enabled; | |
484 | setup_changed = TRUE; | |
485 | break; | |
486 | default: | |
487 | return SR_ERR; | |
488 | } | |
489 | } | |
490 | ||
491 | if (setup_changed && lecroy_xstream_update_sample_rate(sdi) != SR_OK) | |
492 | return SR_ERR; | |
493 | ||
494 | return SR_OK; | |
e3b83c5e SS |
495 | } |
496 | ||
497 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) | |
498 | { | |
3f2c7c94 SS |
499 | GSList *l; |
500 | struct sr_channel *ch; | |
501 | struct dev_context *devc; | |
502 | int ret; | |
503 | struct sr_scpi_dev_inst *scpi; | |
504 | ||
3f2c7c94 SS |
505 | devc = sdi->priv; |
506 | scpi = sdi->conn; | |
ca314e06 | 507 | |
3f2c7c94 SS |
508 | /* Preset empty results. */ |
509 | g_slist_free(devc->enabled_channels); | |
510 | devc->enabled_channels = NULL; | |
511 | ||
512 | /* | |
513 | * Contruct the list of enabled channels. Determine the highest | |
514 | * number of digital pods involved in the acquisition. | |
515 | */ | |
516 | ||
517 | for (l = sdi->channels; l; l = l->next) { | |
518 | ch = l->data; | |
519 | if (!ch->enabled) | |
520 | continue; | |
521 | /* Only add a single digital channel per group (pod). */ | |
522 | devc->enabled_channels = g_slist_append( | |
523 | devc->enabled_channels, ch); | |
524 | } | |
e3b83c5e | 525 | |
3f2c7c94 SS |
526 | if (!devc->enabled_channels) |
527 | return SR_ERR; | |
528 | ||
529 | /* | |
530 | * Configure the analog channels and the | |
531 | * corresponding digital pods. | |
532 | */ | |
6d13a46c | 533 | if (setup_channels(sdi) != SR_OK) { |
3f2c7c94 SS |
534 | sr_err("Failed to setup channel configuration!"); |
535 | ret = SR_ERR; | |
536 | goto free_enabled; | |
537 | } | |
538 | ||
539 | /* | |
540 | * Start acquisition on the first enabled channel. The | |
541 | * receive routine will continue driving the acquisition. | |
542 | */ | |
543 | sr_scpi_source_add(sdi->session, scpi, G_IO_IN, 50, | |
544 | lecroy_xstream_receive_data, (void *)sdi); | |
545 | ||
546 | std_session_send_df_header(sdi); | |
547 | ||
548 | devc->current_channel = devc->enabled_channels; | |
549 | ||
550 | return lecroy_xstream_request_data(sdi); | |
551 | ||
552 | free_enabled: | |
553 | g_slist_free(devc->enabled_channels); | |
554 | devc->enabled_channels = NULL; | |
ea257cdc | 555 | |
3f2c7c94 | 556 | return ret; |
e3b83c5e SS |
557 | } |
558 | ||
559 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) | |
560 | { | |
3f2c7c94 SS |
561 | struct dev_context *devc; |
562 | struct sr_scpi_dev_inst *scpi; | |
563 | ||
564 | std_session_send_df_end(sdi); | |
565 | ||
3f2c7c94 SS |
566 | devc = sdi->priv; |
567 | ||
568 | devc->num_frames = 0; | |
569 | g_slist_free(devc->enabled_channels); | |
570 | devc->enabled_channels = NULL; | |
571 | scpi = sdi->conn; | |
572 | sr_scpi_source_remove(sdi->session, scpi); | |
e3b83c5e SS |
573 | |
574 | return SR_OK; | |
575 | } | |
576 | ||
3f2c7c94 | 577 | static struct sr_dev_driver lecroy_xstream_driver_info = { |
e3b83c5e | 578 | .name = "lecroy-xstream", |
bb08570f | 579 | .longname = "LeCroy X-Stream", |
e3b83c5e SS |
580 | .api_version = 1, |
581 | .init = std_init, | |
582 | .cleanup = std_cleanup, | |
583 | .scan = scan, | |
584 | .dev_list = std_dev_list, | |
585 | .dev_clear = dev_clear, | |
586 | .config_get = config_get, | |
587 | .config_set = config_set, | |
588 | .config_list = config_list, | |
589 | .dev_open = dev_open, | |
590 | .dev_close = dev_close, | |
591 | .dev_acquisition_start = dev_acquisition_start, | |
592 | .dev_acquisition_stop = dev_acquisition_stop, | |
593 | .context = NULL, | |
594 | }; | |
e3b83c5e | 595 | SR_REGISTER_DEV_DRIVER(lecroy_xstream_driver_info); |