]>
Commit | Line | Data |
---|---|---|
c7b17bcb TS |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2015 Tilman Sauerbeck <tilman@code-monkey.de> | |
5 | * Copyright (C) 2012 Bert Vermeulen <bert@biot.com> | |
6 | * | |
7 | * This program is free software: you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation, either version 3 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
19 | */ | |
20 | ||
21 | #include <config.h> | |
22 | #include <stdbool.h> | |
23 | #include <stdint.h> | |
24 | #include <string.h> | |
25 | #include "protocol.h" | |
26 | ||
27 | #define LOGICSTUDIO16_VID 0x05ff | |
28 | #define LOGICSTUDIO16_PID_LACK_FIRMWARE 0xa001 | |
29 | #define LOGICSTUDIO16_PID_HAVE_FIRMWARE 0xa002 | |
30 | ||
31 | #define USB_INTERFACE 0 | |
32 | #define USB_CONFIGURATION 0 | |
33 | #define FX2_FIRMWARE "lecroy-logicstudio16-fx2lp.fw" | |
34 | ||
35 | #define UNKNOWN_ADDRESS 0xff | |
36 | #define MAX_RENUM_DELAY_MS 3000 | |
37 | ||
05199c0a | 38 | static const uint32_t drvopts[] = { |
c7b17bcb | 39 | SR_CONF_LOGIC_ANALYZER, |
05199c0a UH |
40 | }; |
41 | ||
42 | static const uint32_t devopts[] = { | |
c7b17bcb TS |
43 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
44 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
45 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
46 | }; | |
47 | ||
48 | static const int32_t trigger_matches[] = { | |
49 | SR_TRIGGER_ZERO, | |
50 | SR_TRIGGER_ONE, | |
51 | SR_TRIGGER_RISING, | |
52 | SR_TRIGGER_FALLING, | |
53 | SR_TRIGGER_EDGE, | |
54 | }; | |
55 | ||
56 | static const uint64_t samplerates[] = { | |
57 | SR_HZ(1000), | |
58 | SR_HZ(2500), | |
59 | SR_KHZ(5), | |
60 | SR_KHZ(10), | |
61 | SR_KHZ(25), | |
62 | SR_KHZ(50), | |
63 | SR_KHZ(100), | |
64 | SR_KHZ(250), | |
65 | SR_KHZ(500), | |
66 | SR_KHZ(1000), | |
67 | SR_KHZ(2500), | |
68 | SR_MHZ(5), | |
69 | SR_MHZ(10), | |
70 | SR_MHZ(25), | |
71 | SR_MHZ(50), | |
72 | SR_MHZ(100), | |
73 | SR_MHZ(250), | |
74 | SR_MHZ(500), | |
75 | }; | |
76 | ||
15a5bfe4 LPC |
77 | static struct sr_dev_inst *create_device(struct sr_usb_dev_inst *usb, |
78 | enum sr_dev_inst_status status, int64_t fw_updated) | |
c7b17bcb TS |
79 | { |
80 | struct sr_dev_inst *sdi; | |
81 | struct dev_context *devc; | |
82 | char channel_name[8]; | |
83 | int i; | |
84 | ||
85 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
86 | sdi->status = status; | |
87 | sdi->vendor = g_strdup("LeCroy"); | |
88 | sdi->model = g_strdup("LogicStudio16"); | |
c7b17bcb TS |
89 | sdi->inst_type = SR_INST_USB; |
90 | sdi->conn = usb; | |
91 | ||
92 | for (i = 0; i < 16; i++) { | |
93 | snprintf(channel_name, sizeof(channel_name), "D%i", i); | |
94 | sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE, channel_name); | |
95 | } | |
96 | ||
97 | devc = g_malloc0(sizeof(struct dev_context)); | |
98 | ||
99 | sdi->priv = devc; | |
100 | ||
101 | devc->fw_updated = fw_updated; | |
102 | devc->capture_ratio = 50; | |
103 | ||
104 | lls_set_samplerate(sdi, SR_MHZ(500)); | |
105 | ||
106 | return sdi; | |
107 | } | |
108 | ||
109 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
110 | { | |
111 | struct sr_dev_inst *sdi; | |
112 | struct drv_context *drvc; | |
113 | struct sr_usb_dev_inst *usb; | |
114 | struct libusb_device_descriptor des; | |
115 | libusb_device **devlist; | |
116 | GSList *devices; | |
117 | char connection_id[64]; | |
118 | size_t i; | |
119 | int r; | |
120 | ||
121 | (void)options; | |
122 | ||
123 | drvc = di->context; | |
c7b17bcb TS |
124 | |
125 | devices = NULL; | |
126 | ||
127 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
128 | ||
129 | for (i = 0; devlist[i]; i++) { | |
130 | libusb_get_device_descriptor(devlist[i], &des); | |
131 | ||
132 | if (des.idVendor != LOGICSTUDIO16_VID) | |
133 | continue; | |
134 | ||
135 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
136 | ||
137 | usb = NULL; | |
138 | ||
139 | switch (des.idProduct) { | |
140 | case LOGICSTUDIO16_PID_HAVE_FIRMWARE: | |
141 | usb = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
142 | libusb_get_device_address(devlist[i]), NULL); | |
143 | ||
15a5bfe4 | 144 | sdi = create_device(usb, SR_ST_INACTIVE, 0); |
c7b17bcb TS |
145 | break; |
146 | case LOGICSTUDIO16_PID_LACK_FIRMWARE: | |
147 | r = ezusb_upload_firmware(drvc->sr_ctx, devlist[i], | |
148 | USB_CONFIGURATION, FX2_FIRMWARE); | |
149 | if (r != SR_OK) { | |
150 | /* | |
151 | * An error message has already been logged by | |
152 | * ezusb_upload_firmware(). | |
153 | */ | |
154 | continue; | |
155 | } | |
156 | ||
157 | /* | |
158 | * Put unknown as the address so that we know we still | |
159 | * need to get the proper address after the device | |
160 | * renumerates. | |
161 | */ | |
162 | usb = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
163 | UNKNOWN_ADDRESS, NULL); | |
164 | ||
15a5bfe4 | 165 | sdi = create_device(usb, SR_ST_INITIALIZING, |
c7b17bcb TS |
166 | g_get_monotonic_time()); |
167 | break; | |
168 | default: | |
169 | break; | |
170 | } | |
171 | ||
172 | /* Cannot handle this device? */ | |
173 | if (!usb) | |
174 | continue; | |
175 | ||
176 | sdi->connection_id = g_strdup(connection_id); | |
177 | ||
c7b17bcb TS |
178 | devices = g_slist_append(devices, sdi); |
179 | } | |
180 | ||
181 | libusb_free_device_list(devlist, 1); | |
182 | ||
15a5bfe4 | 183 | return std_scan_complete(di, devices); |
c7b17bcb TS |
184 | } |
185 | ||
c7b17bcb TS |
186 | static int open_device(struct sr_dev_inst *sdi) |
187 | { | |
188 | struct drv_context *drvc; | |
189 | struct sr_usb_dev_inst *usb; | |
190 | struct libusb_device_descriptor des; | |
191 | libusb_device **devlist; | |
192 | char connection_id[64]; | |
193 | bool is_opened; | |
194 | size_t i; | |
195 | int r; | |
196 | ||
c7b17bcb TS |
197 | drvc = sdi->driver->context; |
198 | usb = sdi->conn; | |
199 | ||
200 | is_opened = FALSE; | |
201 | ||
202 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
203 | ||
204 | for (i = 0; devlist[i]; i++) { | |
205 | libusb_get_device_descriptor(devlist[i], &des); | |
206 | ||
207 | if (des.idVendor != LOGICSTUDIO16_VID || | |
208 | des.idProduct != LOGICSTUDIO16_PID_HAVE_FIRMWARE) | |
209 | continue; | |
210 | ||
211 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
212 | ||
213 | /* | |
214 | * Check if this device is the same one that we associated | |
215 | * with this sdi in scan() and bail if it isn't. | |
216 | */ | |
217 | if (strcmp(sdi->connection_id, connection_id)) | |
218 | continue; | |
219 | ||
220 | r = libusb_open(devlist[i], &usb->devhdl); | |
221 | ||
222 | if (r) { | |
223 | sr_err("Failed to open device: %s.", | |
224 | libusb_error_name(r)); | |
225 | break; | |
226 | } | |
227 | ||
228 | /* Fix up address after firmware upload. */ | |
229 | if (usb->address == UNKNOWN_ADDRESS) | |
230 | usb->address = libusb_get_device_address(devlist[i]); | |
231 | ||
232 | is_opened = TRUE; | |
233 | ||
234 | break; | |
235 | } | |
236 | ||
237 | libusb_free_device_list(devlist, 1); | |
238 | ||
239 | if (!is_opened) | |
240 | return SR_ERR; | |
241 | ||
242 | if ((r = libusb_claim_interface(usb->devhdl, USB_INTERFACE))) { | |
243 | sr_err("Failed to claim interface: %s.", | |
244 | libusb_error_name(r)); | |
245 | return SR_ERR; | |
246 | } | |
247 | ||
248 | sdi->status = SR_ST_ACTIVE; | |
249 | ||
250 | return SR_OK; | |
251 | } | |
252 | ||
253 | static int dev_open(struct sr_dev_inst *sdi) | |
254 | { | |
c7b17bcb TS |
255 | struct dev_context *devc; |
256 | int64_t timediff_us, timediff_ms; | |
257 | int ret; | |
258 | ||
c7b17bcb TS |
259 | devc = sdi->priv; |
260 | ||
c7b17bcb TS |
261 | /* |
262 | * If we didn't need to upload FX2 firmware in scan(), open the device | |
263 | * right away. Otherwise, wait up to MAX_RENUM_DELAY_MS ms for the | |
264 | * FX2 to renumerate. | |
265 | */ | |
266 | if (!devc->fw_updated) { | |
267 | ret = open_device(sdi); | |
268 | } else { | |
269 | sr_info("Waiting for device to reset."); | |
270 | ||
271 | /* Takes >= 300ms for the FX2 to be gone from the USB bus. */ | |
272 | g_usleep(300 * 1000); | |
273 | timediff_ms = 0; | |
274 | ||
275 | while (timediff_ms < MAX_RENUM_DELAY_MS) { | |
276 | ret = open_device(sdi); | |
277 | ||
278 | if (ret == SR_OK) | |
279 | break; | |
280 | ||
281 | g_usleep(100 * 1000); | |
282 | ||
283 | timediff_us = g_get_monotonic_time() - devc->fw_updated; | |
284 | timediff_ms = timediff_us / 1000; | |
285 | ||
286 | sr_spew("Waited %" PRIi64 "ms.", timediff_ms); | |
287 | } | |
288 | ||
289 | if (ret != SR_OK) { | |
290 | sr_err("Device failed to renumerate."); | |
291 | return SR_ERR; | |
292 | } | |
293 | ||
294 | sr_info("Device came back after %" PRIi64 "ms.", timediff_ms); | |
295 | } | |
296 | ||
297 | if (ret != SR_OK) { | |
298 | sr_err("Unable to open device."); | |
299 | return ret; | |
300 | } | |
301 | ||
302 | /* | |
303 | * Only allocate the sample buffer now since it's rather large. | |
304 | * Don't want to allocate it before we know we are going to use it. | |
305 | */ | |
306 | devc->fetched_samples = g_malloc(SAMPLE_BUF_SIZE); | |
307 | ||
308 | devc->conv8to16 = g_malloc(CONV_8TO16_BUF_SIZE); | |
309 | ||
310 | devc->intr_xfer = libusb_alloc_transfer(0); | |
311 | devc->bulk_xfer = libusb_alloc_transfer(0); | |
312 | ||
313 | return SR_OK; | |
314 | } | |
315 | ||
316 | static int dev_close(struct sr_dev_inst *sdi) | |
317 | { | |
318 | struct sr_usb_dev_inst *usb; | |
319 | struct dev_context *devc; | |
320 | ||
321 | usb = sdi->conn; | |
322 | devc = sdi->priv; | |
323 | ||
324 | g_free(devc->fetched_samples); | |
325 | devc->fetched_samples = NULL; | |
326 | ||
327 | g_free(devc->conv8to16); | |
328 | devc->conv8to16 = NULL; | |
329 | ||
330 | if (devc->intr_xfer) { | |
331 | devc->intr_xfer->buffer = NULL; /* Points into devc. */ | |
332 | libusb_free_transfer(devc->intr_xfer); | |
333 | devc->intr_xfer = NULL; | |
334 | } | |
335 | ||
336 | if (devc->bulk_xfer) { | |
337 | devc->bulk_xfer->buffer = NULL; /* Points into devc. */ | |
338 | libusb_free_transfer(devc->bulk_xfer); | |
339 | devc->bulk_xfer = NULL; | |
340 | } | |
341 | ||
342 | if (!usb->devhdl) | |
f1ba6b4b | 343 | return SR_ERR_BUG; |
c7b17bcb TS |
344 | |
345 | libusb_release_interface(usb->devhdl, 0); | |
346 | ||
347 | libusb_close(usb->devhdl); | |
348 | usb->devhdl = NULL; | |
349 | ||
c7b17bcb TS |
350 | return SR_OK; |
351 | } | |
352 | ||
c7b17bcb TS |
353 | static int config_get(uint32_t key, GVariant **data, |
354 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
355 | { | |
356 | struct dev_context *devc; | |
357 | ||
358 | (void)cg; | |
359 | ||
360 | if (!sdi) | |
361 | return SR_ERR_ARG; | |
362 | ||
363 | devc = sdi->priv; | |
364 | ||
365 | switch (key) { | |
366 | case SR_CONF_SAMPLERATE: | |
367 | *data = g_variant_new_uint64(lls_get_samplerate(sdi)); | |
368 | break; | |
369 | case SR_CONF_CAPTURE_RATIO: | |
370 | *data = g_variant_new_uint64(devc->capture_ratio); | |
371 | break; | |
372 | default: | |
373 | return SR_ERR_NA; | |
374 | } | |
375 | ||
376 | return SR_OK; | |
377 | } | |
378 | ||
379 | static int config_set(uint32_t key, GVariant *data, | |
380 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
381 | { | |
382 | struct dev_context *devc; | |
383 | ||
384 | (void)cg; | |
385 | ||
386 | if (!sdi) | |
387 | return SR_ERR_ARG; | |
388 | ||
389 | devc = sdi->priv; | |
390 | ||
c7b17bcb TS |
391 | switch (key) { |
392 | case SR_CONF_SAMPLERATE: | |
393 | return lls_set_samplerate(sdi, g_variant_get_uint64(data)); | |
394 | case SR_CONF_CAPTURE_RATIO: | |
395 | devc->capture_ratio = g_variant_get_uint64(data); | |
396 | if (devc->capture_ratio > 100) | |
397 | return SR_ERR; | |
398 | break; | |
399 | default: | |
400 | return SR_ERR_NA; | |
401 | } | |
402 | ||
403 | return SR_OK; | |
404 | } | |
405 | ||
406 | static int config_list(uint32_t key, GVariant **data, | |
407 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
408 | { | |
c7b17bcb TS |
409 | switch (key) { |
410 | case SR_CONF_DEVICE_OPTIONS: | |
05199c0a | 411 | return STD_CONFIG_LIST(key, data, sdi, cg, NULL, drvopts, devopts); |
c7b17bcb | 412 | case SR_CONF_SAMPLERATE: |
53012da6 | 413 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates)); |
c7b17bcb TS |
414 | break; |
415 | case SR_CONF_TRIGGER_MATCH: | |
53012da6 | 416 | *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches)); |
c7b17bcb TS |
417 | break; |
418 | default: | |
419 | return SR_ERR_NA; | |
420 | } | |
421 | ||
422 | return SR_OK; | |
423 | } | |
424 | ||
425 | static int config_commit(const struct sr_dev_inst *sdi) | |
426 | { | |
427 | return lls_setup_acquisition(sdi); | |
428 | } | |
429 | ||
430 | static int receive_usb_data(int fd, int revents, void *cb_data) | |
431 | { | |
432 | struct drv_context *drvc; | |
433 | struct timeval tv; | |
434 | ||
435 | (void)fd; | |
436 | (void)revents; | |
437 | ||
695dc859 | 438 | drvc = (struct drv_context *)cb_data; |
c7b17bcb TS |
439 | |
440 | tv.tv_sec = 0; | |
441 | tv.tv_usec = 0; | |
442 | ||
443 | libusb_handle_events_timeout_completed(drvc->sr_ctx->libusb_ctx, | |
444 | &tv, NULL); | |
445 | ||
446 | return TRUE; | |
447 | } | |
448 | ||
695dc859 | 449 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
c7b17bcb TS |
450 | { |
451 | struct drv_context *drvc; | |
452 | int ret; | |
453 | ||
c7b17bcb TS |
454 | drvc = sdi->driver->context; |
455 | ||
456 | if ((ret = lls_start_acquisition(sdi)) < 0) | |
457 | return ret; | |
458 | ||
bee2b016 | 459 | std_session_send_df_header(sdi); |
c7b17bcb TS |
460 | |
461 | return usb_source_add(sdi->session, drvc->sr_ctx, 100, | |
462 | receive_usb_data, drvc); | |
463 | } | |
464 | ||
695dc859 | 465 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) |
c7b17bcb | 466 | { |
c7b17bcb TS |
467 | return lls_stop_acquisition(sdi); |
468 | } | |
469 | ||
dd5c48a6 | 470 | static struct sr_dev_driver lecroy_logicstudio_driver_info = { |
c7b17bcb TS |
471 | .name = "lecroy-logicstudio", |
472 | .longname = "LeCroy LogicStudio", | |
473 | .api_version = 1, | |
c2fdcc25 | 474 | .init = std_init, |
700d6b64 | 475 | .cleanup = std_cleanup, |
c7b17bcb | 476 | .scan = scan, |
c01bf34c | 477 | .dev_list = std_dev_list, |
f778bf02 | 478 | .dev_clear = std_dev_clear, |
c7b17bcb TS |
479 | .config_get = config_get, |
480 | .config_set = config_set, | |
481 | .config_list = config_list, | |
482 | .config_commit = config_commit, | |
483 | .dev_open = dev_open, | |
484 | .dev_close = dev_close, | |
485 | .dev_acquisition_start = dev_acquisition_start, | |
486 | .dev_acquisition_stop = dev_acquisition_stop, | |
487 | .context = NULL, | |
488 | }; | |
dd5c48a6 | 489 | SR_REGISTER_DEV_DRIVER(lecroy_logicstudio_driver_info); |