]>
Commit | Line | Data |
---|---|---|
e75ee7de HV |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2015 Hannu Vuolasaho <vuokkosetae@gmail.com> | |
2e129b8b | 5 | * Copyright (C) 2018-2019 Frank Stettner <frank-stettner@gmx.net> |
e75ee7de HV |
6 | * |
7 | * This program is free software: you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation, either version 3 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
19 | */ | |
20 | ||
21 | #include <config.h> | |
22 | #include "protocol.h" | |
23 | ||
d7083042 HV |
24 | #define DEVICE_PROCESSING_TIME_MS 80 |
25 | ||
16fc7ee2 | 26 | SR_PRIV int korad_kaxxxxp_send_cmd(struct sr_serial_dev_inst *serial, |
d7083042 HV |
27 | const char *cmd) |
28 | { | |
29 | int ret; | |
30 | ||
31 | sr_dbg("Sending '%s'.", cmd); | |
32 | if ((ret = serial_write_blocking(serial, cmd, strlen(cmd), 0)) < 0) { | |
33 | sr_err("Error sending command: %d.", ret); | |
34 | return ret; | |
35 | } | |
36 | ||
37 | return ret; | |
38 | } | |
39 | ||
d2cc60bd GS |
40 | /** |
41 | * Read a variable length non-terminated string (caller specified maximum size). | |
42 | * | |
43 | * @param[in] serial The serial port to read from. | |
44 | * @param[in] count The maximum amount of data to read. | |
45 | * @param[out] buf The buffer to read data into. Must be larger than @a count. | |
46 | * | |
47 | * @return The amount of received data, or negative in case of error. | |
48 | * See @ref SR_ERR and other error codes. | |
49 | * | |
50 | * @internal | |
51 | * | |
52 | * The protocol has no concept of request/response termination. The only | |
53 | * terminating conditions are either the caller's expected maxmimum byte | |
54 | * count, or a period of time without receive data. It's essential to | |
55 | * accept a longer initial period of time before the first receive data | |
56 | * is seen. The supported devices can be very slow to respond. | |
57 | * | |
58 | * The protocol is text based. That's why the 'count' parameter specifies | |
59 | * the expected number of text characters, and does not include the NUL | |
60 | * termination which is not part of the wire protocol but gets added by | |
61 | * the receive routine. The caller provided buffer is expected to have | |
62 | * enough space for the text data and the NUL termination. | |
63 | * | |
64 | * Implementation detail: It's assumed that once receive data was seen, | |
65 | * remaining response data will follow at wire speed. No further delays | |
66 | * are expected beyond bitrate expectations. All normal commands in the | |
67 | * acquisition phase are of fixed length which is known to the caller. | |
68 | * Identification during device scan needs to deal with variable length | |
69 | * data. Quick termination after reception is important there, as is the | |
70 | * larger initial timeout period before receive data is seen. | |
71 | */ | |
16fc7ee2 | 72 | SR_PRIV int korad_kaxxxxp_read_chars(struct sr_serial_dev_inst *serial, |
d2cc60bd | 73 | size_t count, char *buf) |
d7083042 | 74 | { |
d2cc60bd GS |
75 | int timeout_first, timeout_later, timeout; |
76 | size_t retries_first, retries_later, retries; | |
77 | size_t received; | |
78 | int ret; | |
d7083042 | 79 | |
d2cc60bd GS |
80 | /* Clear the buffer early, to simplify the receive code path. */ |
81 | memset(buf, 0, count + 1); | |
d7083042 | 82 | |
d2cc60bd GS |
83 | /* |
84 | * This calculation is aiming for backwards compatibility with | |
85 | * an earlier implementation. An initial timeout is used which | |
86 | * depends on the expected response byte count, and a maximum | |
87 | * iteration count is used for read attempts. | |
88 | * | |
89 | * TODO Consider an absolute initial timeout instead, to reduce | |
90 | * accumulated rounding errors for serial timeout results. The | |
91 | * iteration with a short period is still required for variable | |
92 | * length responses, because otherwise the serial communication | |
93 | * layer would spend the total amount of time waiting for the | |
94 | * remaining bytes, while the device probe code path by design | |
95 | * passes a larger acceptable count than the typical and legal | |
96 | * response would occupy. | |
97 | * | |
98 | * After initial receive data was seen, a shorter timeout is | |
99 | * used which corresponds to a few bytes at wire speed. Idle | |
100 | * periods without receive data longer than this threshold are | |
101 | * taken as the end of the response. This is not compatible to | |
102 | * the previous implementation, but was found to work as well. | |
103 | * And severely reduces the time spent scanning for devices. | |
104 | */ | |
105 | timeout_first = serial_timeout(serial, count); | |
106 | retries_first = 100; | |
107 | timeout_later = serial_timeout(serial, 3); | |
108 | retries_later = 1; | |
109 | ||
110 | sr_spew("want %zu bytes, timeout/retry: init %d/%zu, later %d/%zu.", | |
111 | count, timeout_first, retries_first, | |
112 | timeout_later, retries_later); | |
113 | ||
114 | /* | |
115 | * Run a sequence of read attempts. Try with the larger timeout | |
116 | * and a high retry count until the first receive data became | |
117 | * available. Then continue with a short timeout and small retry | |
118 | * count. | |
119 | * | |
120 | * Failed read is fatal, immediately terminates the read sequence. | |
121 | * A timeout in the initial phase just keeps repeating. A timeout | |
122 | * after receive data was seen regularly terminates the sequence. | |
123 | * Successful reads of non-empty responses keep extending the | |
124 | * read sequence until no more receive data is available. | |
125 | */ | |
126 | received = 0; | |
127 | timeout = timeout_first; | |
128 | retries = retries_first; | |
129 | while (received < count && retries--) { | |
130 | ret = serial_read_blocking(serial, | |
131 | &buf[received], count - received, timeout); | |
132 | if (ret < 0) { | |
133 | sr_err("Error %d reading %zu bytes from device.", | |
d7083042 HV |
134 | ret, count); |
135 | return ret; | |
136 | } | |
d2cc60bd GS |
137 | if (ret == 0 && !received) |
138 | continue; | |
139 | if (ret == 0 && received) { | |
140 | sr_spew("receive timed out, want %zu, received %zu.", | |
141 | count, received); | |
142 | break; | |
143 | } | |
d7083042 | 144 | received += ret; |
d2cc60bd GS |
145 | timeout = timeout_later; |
146 | retries = retries_later; | |
147 | } | |
148 | /* TODO Escape non-printables? Seen those with status queries. */ | |
149 | sr_dbg("got %zu bytes, received: '%s'.", received, buf); | |
d7083042 | 150 | |
d2cc60bd | 151 | return received; |
d7083042 HV |
152 | } |
153 | ||
154 | static void give_device_time_to_process(struct dev_context *devc) | |
155 | { | |
156 | int64_t sleeping_time; | |
157 | ||
158 | sleeping_time = devc->req_sent_at + (DEVICE_PROCESSING_TIME_MS * 1000); | |
159 | sleeping_time -= g_get_monotonic_time(); | |
160 | ||
161 | if (sleeping_time > 0) { | |
162 | g_usleep(sleeping_time); | |
ef2bcf11 | 163 | sr_spew("Sleeping for processing %" PRIi64 " usec", sleeping_time); |
d7083042 HV |
164 | } |
165 | } | |
166 | ||
16fc7ee2 | 167 | SR_PRIV int korad_kaxxxxp_set_value(struct sr_serial_dev_inst *serial, |
3f9b48ae | 168 | int target, struct dev_context *devc) |
d7083042 | 169 | { |
8f39d569 | 170 | char *msg; |
2c240774 | 171 | const char *cmd; |
d7083042 HV |
172 | float value; |
173 | int ret; | |
174 | ||
3f9b48ae | 175 | g_mutex_lock(&devc->rw_mutex); |
d7083042 HV |
176 | give_device_time_to_process(devc); |
177 | ||
3f9b48ae | 178 | switch (target) { |
16fc7ee2 UH |
179 | case KAXXXXP_CURRENT: |
180 | case KAXXXXP_VOLTAGE: | |
181 | case KAXXXXP_STATUS: | |
3f9b48ae FS |
182 | sr_err("Can't set measurable parameter %d.", target); |
183 | g_mutex_unlock(&devc->rw_mutex); | |
d7083042 | 184 | return SR_ERR; |
8da30037 | 185 | case KAXXXXP_CURRENT_LIMIT: |
d7083042 | 186 | cmd = "ISET1:%05.3f"; |
8da30037 | 187 | value = devc->set_current_limit; |
d7083042 | 188 | break; |
8da30037 | 189 | case KAXXXXP_VOLTAGE_TARGET: |
d7083042 | 190 | cmd = "VSET1:%05.2f"; |
8da30037 | 191 | value = devc->set_voltage_target; |
d7083042 | 192 | break; |
16fc7ee2 | 193 | case KAXXXXP_OUTPUT: |
d7083042 | 194 | cmd = "OUT%01.0f"; |
8da30037 FS |
195 | value = (devc->set_output_enabled) ? 1 : 0; |
196 | /* Set value back to recognize changes */ | |
197 | devc->output_enabled = devc->set_output_enabled; | |
d7083042 | 198 | break; |
16fc7ee2 | 199 | case KAXXXXP_BEEP: |
d7083042 | 200 | cmd = "BEEP%01.0f"; |
8da30037 | 201 | value = (devc->set_beep_enabled) ? 1 : 0; |
d7083042 | 202 | break; |
16fc7ee2 | 203 | case KAXXXXP_OCP: |
c40ed60f | 204 | cmd = "OCP%01.0f"; |
8da30037 FS |
205 | value = (devc->set_ocp_enabled) ? 1 : 0; |
206 | /* Set value back to recognize changes */ | |
207 | devc->ocp_enabled = devc->set_ocp_enabled; | |
c40ed60f | 208 | break; |
16fc7ee2 | 209 | case KAXXXXP_OVP: |
c40ed60f | 210 | cmd = "OVP%01.0f"; |
8da30037 FS |
211 | value = (devc->set_ovp_enabled) ? 1 : 0; |
212 | /* Set value back to recognize changes */ | |
213 | devc->ovp_enabled = devc->set_ovp_enabled; | |
c40ed60f | 214 | break; |
16fc7ee2 | 215 | case KAXXXXP_SAVE: |
d7083042 HV |
216 | cmd = "SAV%01.0f"; |
217 | if (devc->program < 1 || devc->program > 5) { | |
218 | sr_err("Only programs 1-5 supported and %d isn't " | |
219 | "between them.", devc->program); | |
3f9b48ae | 220 | g_mutex_unlock(&devc->rw_mutex); |
d7083042 HV |
221 | return SR_ERR; |
222 | } | |
223 | value = devc->program; | |
224 | break; | |
16fc7ee2 | 225 | case KAXXXXP_RECALL: |
d7083042 HV |
226 | cmd = "RCL%01.0f"; |
227 | if (devc->program < 1 || devc->program > 5) { | |
228 | sr_err("Only programs 1-5 supported and %d isn't " | |
229 | "between them.", devc->program); | |
3f9b48ae | 230 | g_mutex_unlock(&devc->rw_mutex); |
d7083042 HV |
231 | return SR_ERR; |
232 | } | |
233 | value = devc->program; | |
234 | break; | |
235 | default: | |
3f9b48ae FS |
236 | sr_err("Don't know how to set %d.", target); |
237 | g_mutex_unlock(&devc->rw_mutex); | |
d7083042 HV |
238 | return SR_ERR; |
239 | } | |
240 | ||
8f39d569 | 241 | msg = g_malloc0(20 + 1); |
d7083042 | 242 | if (cmd) |
8f39d569 | 243 | sr_snprintf_ascii(msg, 20, cmd, value); |
d7083042 | 244 | |
16fc7ee2 | 245 | ret = korad_kaxxxxp_send_cmd(serial, msg); |
d7083042 | 246 | devc->req_sent_at = g_get_monotonic_time(); |
8f39d569 | 247 | g_free(msg); |
3f9b48ae FS |
248 | |
249 | g_mutex_unlock(&devc->rw_mutex); | |
d7083042 HV |
250 | |
251 | return ret; | |
252 | } | |
253 | ||
3f9b48ae FS |
254 | SR_PRIV int korad_kaxxxxp_get_value(struct sr_serial_dev_inst *serial, |
255 | int target, struct dev_context *devc) | |
d7083042 | 256 | { |
3f9b48ae FS |
257 | int ret, count; |
258 | char reply[6]; | |
259 | float *value; | |
260 | char status_byte; | |
2e129b8b | 261 | gboolean prev_status; |
d7083042 | 262 | |
3f9b48ae | 263 | g_mutex_lock(&devc->rw_mutex); |
d7083042 HV |
264 | give_device_time_to_process(devc); |
265 | ||
3f9b48ae FS |
266 | value = NULL; |
267 | count = 5; | |
268 | ||
269 | switch (target) { | |
16fc7ee2 | 270 | case KAXXXXP_CURRENT: |
d7083042 | 271 | /* Read current from device. */ |
16fc7ee2 | 272 | ret = korad_kaxxxxp_send_cmd(serial, "IOUT1?"); |
3f9b48ae | 273 | value = &(devc->current); |
d7083042 | 274 | break; |
8da30037 | 275 | case KAXXXXP_CURRENT_LIMIT: |
d7083042 | 276 | /* Read set current from device. */ |
16fc7ee2 | 277 | ret = korad_kaxxxxp_send_cmd(serial, "ISET1?"); |
8da30037 | 278 | value = &(devc->current_limit); |
d7083042 | 279 | break; |
16fc7ee2 | 280 | case KAXXXXP_VOLTAGE: |
d7083042 | 281 | /* Read voltage from device. */ |
16fc7ee2 | 282 | ret = korad_kaxxxxp_send_cmd(serial, "VOUT1?"); |
3f9b48ae | 283 | value = &(devc->voltage); |
d7083042 | 284 | break; |
8da30037 | 285 | case KAXXXXP_VOLTAGE_TARGET: |
d7083042 | 286 | /* Read set voltage from device. */ |
16fc7ee2 | 287 | ret = korad_kaxxxxp_send_cmd(serial, "VSET1?"); |
8da30037 | 288 | value = &(devc->voltage_target); |
d7083042 | 289 | break; |
16fc7ee2 UH |
290 | case KAXXXXP_STATUS: |
291 | case KAXXXXP_OUTPUT: | |
3f9b48ae FS |
292 | case KAXXXXP_OCP: |
293 | case KAXXXXP_OVP: | |
d7083042 | 294 | /* Read status from device. */ |
16fc7ee2 | 295 | ret = korad_kaxxxxp_send_cmd(serial, "STATUS?"); |
3f9b48ae | 296 | count = 1; |
d7083042 HV |
297 | break; |
298 | default: | |
3f9b48ae FS |
299 | sr_err("Don't know how to query %d.", target); |
300 | g_mutex_unlock(&devc->rw_mutex); | |
d7083042 HV |
301 | return SR_ERR; |
302 | } | |
303 | ||
304 | devc->req_sent_at = g_get_monotonic_time(); | |
d7083042 | 305 | |
3f9b48ae FS |
306 | if ((ret = korad_kaxxxxp_read_chars(serial, count, reply)) < 0) { |
307 | g_mutex_unlock(&devc->rw_mutex); | |
d7083042 | 308 | return ret; |
3f9b48ae | 309 | } |
d7083042 | 310 | |
3f9b48ae FS |
311 | if (value) { |
312 | sr_atof_ascii((const char *)&reply, value); | |
313 | sr_dbg("value: %f", *value); | |
d7083042 HV |
314 | } else { |
315 | /* We have status reply. */ | |
3f9b48ae | 316 | status_byte = reply[0]; |
2e129b8b FS |
317 | |
318 | /* Constant current channel one. */ | |
319 | prev_status = devc->cc_mode[0]; | |
320 | devc->cc_mode[0] = !(status_byte & (1 << 0)); | |
321 | devc->cc_mode_1_changed = devc->cc_mode[0] != prev_status; | |
322 | /* Constant current channel two. */ | |
323 | prev_status = devc->cc_mode[1]; | |
324 | devc->cc_mode[1] = !(status_byte & (1 << 1)); | |
325 | devc->cc_mode_2_changed = devc->cc_mode[1] != prev_status; | |
326 | ||
d7083042 | 327 | /* |
2e129b8b | 328 | * Tracking: |
d7083042 HV |
329 | * status_byte & ((1 << 2) | (1 << 3)) |
330 | * 00 independent 01 series 11 parallel | |
331 | */ | |
2e129b8b FS |
332 | devc->beep_enabled = status_byte & (1 << 4); |
333 | ||
334 | /* OCP enabled. */ | |
335 | prev_status = devc->ocp_enabled; | |
336 | devc->ocp_enabled = status_byte & (1 << 5); | |
337 | devc->ocp_enabled_changed = devc->ocp_enabled != prev_status; | |
338 | ||
339 | /* Output status. */ | |
340 | prev_status = devc->output_enabled; | |
341 | devc->output_enabled = status_byte & (1 << 6); | |
342 | devc->output_enabled_changed = devc->output_enabled != prev_status; | |
343 | ||
344 | /* OVP enabled, special handling for Velleman LABPS3005 quirk. */ | |
345 | if ((devc->model->model_id == VELLEMAN_LABPS3005D && devc->output_enabled) || | |
346 | devc->model->model_id != VELLEMAN_LABPS3005D) { | |
347 | ||
348 | prev_status = devc->ovp_enabled; | |
349 | devc->ovp_enabled = status_byte & (1 << 7); | |
350 | devc->ovp_enabled_changed = devc->ovp_enabled != prev_status; | |
351 | } | |
352 | ||
d7083042 | 353 | sr_dbg("Status: 0x%02x", status_byte); |
c40ed60f | 354 | sr_spew("Status: CH1: constant %s CH2: constant %s. " |
253d653d FS |
355 | "Tracking would be %s and %s. Output is %s. " |
356 | "OCP is %s, OVP is %s. Device is %s.", | |
d7083042 HV |
357 | (status_byte & (1 << 0)) ? "voltage" : "current", |
358 | (status_byte & (1 << 1)) ? "voltage" : "current", | |
c40ed60f | 359 | (status_byte & (1 << 2)) ? "parallel" : "series", |
d7083042 | 360 | (status_byte & (1 << 3)) ? "tracking" : "independent", |
c40ed60f | 361 | (status_byte & (1 << 6)) ? "enabled" : "disabled", |
253d653d FS |
362 | (status_byte & (1 << 5)) ? "enabled" : "disabled", |
363 | (status_byte & (1 << 7)) ? "enabled" : "disabled", | |
364 | (status_byte & (1 << 4)) ? "beeping" : "silent"); | |
d7083042 | 365 | } |
3f9b48ae | 366 | |
8abdf006 | 367 | /* Read the sixth byte from ISET? BUG workaround. */ |
8da30037 | 368 | if (target == KAXXXXP_CURRENT_LIMIT) |
8abdf006 | 369 | serial_read_blocking(serial, &status_byte, 1, 10); |
3f9b48ae FS |
370 | |
371 | g_mutex_unlock(&devc->rw_mutex); | |
372 | ||
373 | return ret; | |
374 | } | |
375 | ||
376 | SR_PRIV int korad_kaxxxxp_get_all_values(struct sr_serial_dev_inst *serial, | |
377 | struct dev_context *devc) | |
378 | { | |
379 | int ret, target; | |
380 | ||
381 | for (target = KAXXXXP_CURRENT; | |
382 | target <= KAXXXXP_STATUS; target++) { | |
383 | if ((ret = korad_kaxxxxp_get_value(serial, target, devc)) < 0) | |
384 | return ret; | |
385 | } | |
d7083042 HV |
386 | |
387 | return ret; | |
388 | } | |
389 | ||
390 | static void next_measurement(struct dev_context *devc) | |
391 | { | |
3f9b48ae | 392 | switch (devc->acquisition_target) { |
16fc7ee2 | 393 | case KAXXXXP_CURRENT: |
3f9b48ae | 394 | devc->acquisition_target = KAXXXXP_VOLTAGE; |
d7083042 | 395 | break; |
16fc7ee2 | 396 | case KAXXXXP_VOLTAGE: |
3f9b48ae | 397 | devc->acquisition_target = KAXXXXP_STATUS; |
d7083042 | 398 | break; |
16fc7ee2 | 399 | case KAXXXXP_STATUS: |
3f9b48ae | 400 | devc->acquisition_target = KAXXXXP_CURRENT; |
d7083042 HV |
401 | break; |
402 | default: | |
3f9b48ae FS |
403 | devc->acquisition_target = KAXXXXP_CURRENT; |
404 | sr_err("Invalid target for next acquisition."); | |
d7083042 HV |
405 | } |
406 | } | |
407 | ||
16fc7ee2 | 408 | SR_PRIV int korad_kaxxxxp_receive_data(int fd, int revents, void *cb_data) |
e75ee7de | 409 | { |
d7083042 | 410 | struct sr_dev_inst *sdi; |
e75ee7de | 411 | struct dev_context *devc; |
d7083042 HV |
412 | struct sr_serial_dev_inst *serial; |
413 | struct sr_datafeed_packet packet; | |
2e715341 UH |
414 | struct sr_datafeed_analog analog; |
415 | struct sr_analog_encoding encoding; | |
416 | struct sr_analog_meaning meaning; | |
417 | struct sr_analog_spec spec; | |
23165d7b | 418 | GSList *l; |
e75ee7de HV |
419 | |
420 | (void)fd; | |
a7e48f3c | 421 | (void)revents; |
e75ee7de HV |
422 | |
423 | if (!(sdi = cb_data)) | |
424 | return TRUE; | |
425 | ||
426 | if (!(devc = sdi->priv)) | |
427 | return TRUE; | |
428 | ||
d7083042 HV |
429 | serial = sdi->conn; |
430 | ||
a7e48f3c FS |
431 | /* Get the value. */ |
432 | korad_kaxxxxp_get_value(serial, devc->acquisition_target, devc); | |
433 | ||
434 | /* Note: digits/spec_digits will be overridden later. */ | |
435 | sr_analog_init(&analog, &encoding, &meaning, &spec, 0); | |
436 | ||
437 | /* Send the value forward. */ | |
438 | packet.type = SR_DF_ANALOG; | |
439 | packet.payload = &analog; | |
440 | analog.num_samples = 1; | |
441 | l = g_slist_copy(sdi->channels); | |
442 | if (devc->acquisition_target == KAXXXXP_CURRENT) { | |
443 | l = g_slist_remove_link(l, g_slist_nth(l, 0)); | |
444 | analog.meaning->channels = l; | |
445 | analog.meaning->mq = SR_MQ_CURRENT; | |
446 | analog.meaning->unit = SR_UNIT_AMPERE; | |
d1a3f3be | 447 | analog.meaning->mqflags = SR_MQFLAG_DC; |
a7e48f3c FS |
448 | analog.encoding->digits = 3; |
449 | analog.spec->spec_digits = 3; | |
450 | analog.data = &devc->current; | |
451 | sr_session_send(sdi, &packet); | |
452 | } else if (devc->acquisition_target == KAXXXXP_VOLTAGE) { | |
453 | l = g_slist_remove_link(l, g_slist_nth(l, 1)); | |
454 | analog.meaning->channels = l; | |
455 | analog.meaning->mq = SR_MQ_VOLTAGE; | |
456 | analog.meaning->unit = SR_UNIT_VOLT; | |
457 | analog.meaning->mqflags = SR_MQFLAG_DC; | |
458 | analog.encoding->digits = 2; | |
459 | analog.spec->spec_digits = 2; | |
460 | analog.data = &devc->voltage; | |
461 | sr_session_send(sdi, &packet); | |
462 | sr_sw_limits_update_samples_read(&devc->limits, 1); | |
2e129b8b FS |
463 | } else if (devc->acquisition_target == KAXXXXP_STATUS) { |
464 | if (devc->cc_mode_1_changed) { | |
465 | sr_session_send_meta(sdi, SR_CONF_REGULATION, | |
466 | g_variant_new_string((devc->cc_mode[0]) ? "CC" : "CV")); | |
467 | devc->cc_mode_1_changed = FALSE; | |
468 | } | |
469 | if (devc->cc_mode_2_changed) { | |
470 | sr_session_send_meta(sdi, SR_CONF_REGULATION, | |
471 | g_variant_new_string((devc->cc_mode[1]) ? "CC" : "CV")); | |
472 | devc->cc_mode_2_changed = FALSE; | |
473 | } | |
474 | if (devc->output_enabled_changed) { | |
475 | sr_session_send_meta(sdi, SR_CONF_ENABLED, | |
476 | g_variant_new_boolean(devc->output_enabled)); | |
477 | devc->output_enabled_changed = FALSE; | |
478 | } | |
479 | if (devc->ocp_enabled_changed) { | |
480 | sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ENABLED, | |
481 | g_variant_new_boolean(devc->ocp_enabled)); | |
482 | devc->ocp_enabled_changed = FALSE; | |
483 | } | |
484 | if (devc->ovp_enabled_changed) { | |
485 | sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED, | |
486 | g_variant_new_boolean(devc->ovp_enabled)); | |
487 | devc->ovp_enabled_changed = FALSE; | |
488 | } | |
d7083042 | 489 | } |
a7e48f3c | 490 | next_measurement(devc); |
d7083042 | 491 | |
3f9b48ae | 492 | if (sr_sw_limits_check(&devc->limits)) |
d2f7c417 | 493 | sr_dev_acquisition_stop(sdi); |
e75ee7de HV |
494 | |
495 | return TRUE; | |
496 | } |