]>
Commit | Line | Data |
---|---|---|
fdf4a1f5 UH |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
20 | ||
6ec6c43b | 21 | #include <config.h> |
fdf4a1f5 UH |
22 | #include "protocol.h" |
23 | ||
ab4bb6eb UH |
24 | /* |
25 | * Logic level thresholds. | |
26 | * | |
27 | * For each of the two channel groups (1-4 and 5-9), the logic level | |
28 | * threshold can be set independently. | |
29 | * | |
30 | * The threshold can be set to values that are usable for systems with | |
31 | * different voltage levels, e.g. for 1.8V or 3.3V systems. | |
32 | * | |
33 | * The actual threshold value is always the middle of the values below. | |
34 | * E.g. for a system voltage level of 1.8V, the threshold is at 0.9V. That | |
35 | * means that values <= 0.9V are considered to be a logic 0/low, and | |
36 | * values > 0.9V are considered to be a logic 1/high. | |
37 | * | |
38 | * - 1.2V system: threshold = 0.6V | |
39 | * - 1.5V system: threshold = 0.75V | |
40 | * - 1.8V system: threshold = 0.9V | |
41 | * - 2.8V system: threshold = 1.4V | |
42 | * - 3.3V system: threshold = 1.65V | |
43 | */ | |
44 | #define THRESHOLD_1_2V_SYSTEM 0x2e | |
45 | #define THRESHOLD_1_5V_SYSTEM 0x39 | |
46 | #define THRESHOLD_1_8V_SYSTEM 0x45 | |
47 | #define THRESHOLD_2_8V_SYSTEM 0x6c | |
48 | #define THRESHOLD_3_3V_SYSTEM 0x7f | |
49 | ||
50 | static int scanaplus_write(struct dev_context *devc, uint8_t *buf, int size) | |
51 | { | |
52 | int i, bytes_written; | |
53 | GString *s; | |
54 | ||
55 | /* Note: Caller checks devc, devc->ftdic, buf, size. */ | |
56 | ||
57 | s = g_string_sized_new(100); | |
58 | g_string_printf(s, "Writing %d bytes: ", size); | |
59 | for (i = 0; i < size; i++) | |
60 | g_string_append_printf(s, "0x%02x ", buf[i]); | |
61 | sr_spew("%s", s->str); | |
62 | g_string_free(s, TRUE); | |
63 | ||
64 | bytes_written = ftdi_write_data(devc->ftdic, buf, size); | |
65 | if (bytes_written < 0) { | |
66 | sr_err("Failed to write FTDI data (%d): %s.", | |
67 | bytes_written, ftdi_get_error_string(devc->ftdic)); | |
68 | } else if (bytes_written != size) { | |
69 | sr_err("FTDI write error, only %d/%d bytes written: %s.", | |
70 | bytes_written, size, ftdi_get_error_string(devc->ftdic)); | |
71 | } | |
72 | ||
73 | return bytes_written; | |
74 | } | |
75 | ||
76 | SR_PRIV int scanaplus_close(struct dev_context *devc) | |
77 | { | |
78 | int ret; | |
79 | ||
80 | /* Note: Caller checks devc and devc->ftdic. */ | |
81 | ||
82 | if ((ret = ftdi_usb_close(devc->ftdic)) < 0) { | |
83 | sr_err("Failed to close FTDI device (%d): %s.", | |
84 | ret, ftdi_get_error_string(devc->ftdic)); | |
85 | return SR_ERR; | |
86 | } | |
87 | ||
88 | return SR_OK; | |
89 | } | |
90 | ||
91 | static void scanaplus_uncompress_block(struct dev_context *devc, | |
92 | uint64_t num_bytes) | |
fdf4a1f5 | 93 | { |
ab4bb6eb UH |
94 | uint64_t i, j; |
95 | uint8_t num_samples, low, high; | |
96 | ||
97 | for (i = 0; i < num_bytes; i += 2) { | |
98 | num_samples = devc->compressed_buf[i + 0] >> 1; | |
99 | ||
100 | low = devc->compressed_buf[i + 0] & (1 << 0); | |
101 | high = devc->compressed_buf[i + 1]; | |
102 | ||
103 | for (j = 0; j < num_samples; j++) { | |
104 | devc->sample_buf[devc->bytes_received++] = high; | |
105 | devc->sample_buf[devc->bytes_received++] = low; | |
106 | } | |
107 | } | |
108 | } | |
109 | ||
695dc859 | 110 | static void send_samples(const struct sr_dev_inst *sdi, uint64_t samples_to_send) |
ab4bb6eb UH |
111 | { |
112 | struct sr_datafeed_packet packet; | |
113 | struct sr_datafeed_logic logic; | |
695dc859 UH |
114 | struct dev_context *devc; |
115 | ||
116 | devc = sdi->priv; | |
ab4bb6eb UH |
117 | |
118 | sr_spew("Sending %" PRIu64 " samples.", samples_to_send); | |
119 | ||
120 | packet.type = SR_DF_LOGIC; | |
121 | packet.payload = &logic; | |
122 | logic.length = samples_to_send * 2; | |
ba7dd8bb | 123 | logic.unitsize = 2; /* We need 2 bytes for 9 channels. */ |
ab4bb6eb | 124 | logic.data = devc->sample_buf; |
695dc859 | 125 | sr_session_send(sdi, &packet); |
ab4bb6eb UH |
126 | |
127 | devc->samples_sent += samples_to_send; | |
128 | devc->bytes_received -= samples_to_send * 2; | |
129 | } | |
130 | ||
131 | SR_PRIV int scanaplus_get_device_id(struct dev_context *devc) | |
132 | { | |
133 | int ret; | |
134 | uint16_t val1, val2; | |
135 | ||
136 | /* FTDI EEPROM indices 16+17 contain the 3 device ID bytes. */ | |
137 | if ((ret = ftdi_read_eeprom_location(devc->ftdic, 16, &val1)) < 0) { | |
138 | sr_err("Failed to read EEPROM index 16 (%d): %s.", | |
139 | ret, ftdi_get_error_string(devc->ftdic)); | |
140 | return SR_ERR; | |
141 | } | |
142 | if ((ret = ftdi_read_eeprom_location(devc->ftdic, 17, &val2)) < 0) { | |
143 | sr_err("Failed to read EEPROM index 17 (%d): %s.", | |
144 | ret, ftdi_get_error_string(devc->ftdic)); | |
145 | return SR_ERR; | |
146 | } | |
147 | ||
148 | /* | |
149 | * Note: Bit 7 of the three bytes must not be used, apparently. | |
150 | * | |
151 | * Even though the three bits can be either 0 or 1 (we've seen both | |
152 | * in actual ScanaPLUS devices), the device ID as sent to the FPGA | |
153 | * has bit 7 of each byte zero'd out. | |
154 | * | |
155 | * It is unknown whether bit 7 of these bytes has any meaning, | |
156 | * whether it's used somewhere, or whether it can be simply ignored. | |
157 | */ | |
158 | devc->devid[0] = ((val1 >> 0) & 0xff) & ~(1 << 7); | |
159 | devc->devid[1] = ((val1 >> 8) & 0xff) & ~(1 << 7); | |
160 | devc->devid[2] = ((val2 >> 0) & 0xff) & ~(1 << 7); | |
161 | ||
162 | return SR_OK; | |
163 | } | |
164 | ||
165 | static int scanaplus_clear_device_id(struct dev_context *devc) | |
166 | { | |
167 | uint8_t buf[2]; | |
168 | ||
169 | buf[0] = 0x8c; | |
170 | buf[1] = 0x00; | |
171 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
172 | return SR_ERR; | |
173 | ||
174 | buf[0] = 0x8e; | |
175 | buf[1] = 0x00; | |
176 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
177 | return SR_ERR; | |
178 | ||
179 | buf[0] = 0x8f; | |
180 | buf[1] = 0x00; | |
181 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
182 | return SR_ERR; | |
183 | ||
184 | return SR_OK; | |
185 | } | |
186 | ||
187 | static int scanaplus_send_device_id(struct dev_context *devc) | |
188 | { | |
189 | uint8_t buf[2]; | |
190 | ||
191 | buf[0] = 0x8c; | |
192 | buf[1] = devc->devid[0]; | |
193 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
194 | return SR_ERR; | |
195 | ||
196 | buf[0] = 0x8e; | |
197 | buf[1] = devc->devid[1]; | |
198 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
199 | return SR_ERR; | |
200 | ||
201 | buf[0] = 0x8f; | |
202 | buf[1] = devc->devid[2]; | |
203 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
204 | return SR_ERR; | |
205 | ||
206 | return SR_OK; | |
207 | } | |
208 | ||
209 | SR_PRIV int scanaplus_init(struct dev_context *devc) | |
210 | { | |
211 | int i; | |
212 | uint8_t buf[8]; | |
213 | ||
214 | buf[0] = 0x88; | |
215 | buf[1] = 0x41; | |
216 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
217 | return SR_ERR; | |
218 | ||
219 | buf[0] = 0x89; | |
220 | buf[1] = 0x64; | |
221 | buf[2] = 0x8a; | |
222 | buf[3] = 0x64; | |
223 | if (scanaplus_write(devc, (uint8_t *)&buf, 4) < 0) | |
224 | return SR_ERR; | |
225 | ||
226 | buf[0] = 0x88; | |
227 | buf[1] = 0x41; | |
228 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
229 | return SR_ERR; | |
230 | ||
231 | buf[0] = 0x88; | |
232 | buf[1] = 0x40; | |
233 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
234 | return SR_ERR; | |
235 | ||
236 | buf[0] = 0x8d; | |
237 | buf[1] = 0x01; | |
238 | buf[2] = 0x8d; | |
239 | buf[3] = 0x05; | |
240 | buf[4] = 0x8d; | |
241 | buf[5] = 0x01; | |
242 | buf[6] = 0x8d; | |
243 | buf[7] = 0x02; | |
244 | if (scanaplus_write(devc, (uint8_t *)&buf, 8) < 0) | |
245 | return SR_ERR; | |
246 | ||
247 | for (i = 0; i < 57; i++) { | |
248 | buf[0] = 0x8d; | |
249 | buf[1] = 0x06; | |
250 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
251 | return SR_ERR; | |
252 | ||
253 | buf[0] = 0x8d; | |
254 | buf[1] = 0x02; | |
255 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
256 | return SR_ERR; | |
257 | } | |
258 | ||
259 | if (scanaplus_send_device_id(devc) < 0) | |
260 | return SR_ERR; | |
261 | ||
262 | buf[0] = 0x88; | |
263 | buf[1] = 0x40; | |
264 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
265 | return SR_ERR; | |
266 | ||
267 | return SR_OK; | |
268 | } | |
269 | ||
270 | SR_PRIV int scanaplus_start_acquisition(struct dev_context *devc) | |
271 | { | |
272 | uint8_t buf[4]; | |
273 | ||
ba7dd8bb | 274 | /* Threshold and differential channel settings not yet implemented. */ |
ab4bb6eb UH |
275 | |
276 | buf[0] = 0x89; | |
ba7dd8bb | 277 | buf[1] = 0x7f; /* Logic level threshold for channels 1-4. */ |
ab4bb6eb | 278 | buf[2] = 0x8a; |
ba7dd8bb | 279 | buf[3] = 0x7f; /* Logic level threshold for channels 5-9. */ |
ab4bb6eb UH |
280 | if (scanaplus_write(devc, (uint8_t *)&buf, 4) < 0) |
281 | return SR_ERR; | |
282 | ||
283 | buf[0] = 0x88; | |
ba7dd8bb | 284 | buf[1] = 0x40; /* Special config of channels 5/6 and 7/8. */ |
ab4bb6eb UH |
285 | /* 0x40: normal, 0x50: ch56 diff, 0x48: ch78 diff, 0x58: ch5678 diff */ |
286 | if (scanaplus_write(devc, (uint8_t *)&buf, 2) < 0) | |
287 | return SR_ERR; | |
288 | ||
289 | if (scanaplus_clear_device_id(devc) < 0) | |
290 | return SR_ERR; | |
291 | ||
292 | if (scanaplus_send_device_id(devc) < 0) | |
293 | return SR_ERR; | |
294 | ||
295 | return SR_OK; | |
296 | } | |
297 | ||
298 | SR_PRIV int scanaplus_receive_data(int fd, int revents, void *cb_data) | |
299 | { | |
300 | int bytes_read; | |
301 | struct sr_dev_inst *sdi; | |
fdf4a1f5 | 302 | struct dev_context *devc; |
ab4bb6eb | 303 | uint64_t max, n; |
fdf4a1f5 UH |
304 | |
305 | (void)fd; | |
ab4bb6eb | 306 | (void)revents; |
fdf4a1f5 UH |
307 | |
308 | if (!(sdi = cb_data)) | |
309 | return TRUE; | |
310 | ||
311 | if (!(devc = sdi->priv)) | |
312 | return TRUE; | |
313 | ||
ab4bb6eb UH |
314 | if (!devc->ftdic) |
315 | return TRUE; | |
316 | ||
317 | /* Get a block of data. */ | |
318 | bytes_read = ftdi_read_data(devc->ftdic, devc->compressed_buf, | |
319 | COMPRESSED_BUF_SIZE); | |
320 | if (bytes_read < 0) { | |
321 | sr_err("Failed to read FTDI data (%d): %s.", | |
322 | bytes_read, ftdi_get_error_string(devc->ftdic)); | |
695dc859 | 323 | sdi->driver->dev_acquisition_stop(sdi); |
ab4bb6eb UH |
324 | return FALSE; |
325 | } | |
326 | if (bytes_read == 0) { | |
327 | sr_spew("Received 0 bytes, nothing to do."); | |
328 | return TRUE; | |
329 | } | |
330 | ||
331 | /* | |
332 | * After a ScanaPLUS acquisition starts, a bunch of samples will be | |
333 | * returned as all-zero, no matter which signals are actually present | |
ba7dd8bb | 334 | * on the channels. This is probably due to the FPGA reconfiguring some |
ab4bb6eb UH |
335 | * of its internal state/config during this time. |
336 | * | |
337 | * As far as we know there is apparently no way for the PC-side to | |
338 | * know when this "reconfiguration" starts or ends. The FTDI chip | |
339 | * will return all-zero "dummy" samples during this time, which is | |
340 | * indistinguishable from actual all-zero samples. | |
341 | * | |
342 | * We currently simply ignore the first 64kB of data after an | |
343 | * acquisition starts. Empirical tests have shown that the | |
344 | * "reconfigure" time is a lot less than that usually. | |
345 | */ | |
346 | if (devc->compressed_bytes_ignored < COMPRESSED_BUF_SIZE) { | |
347 | /* Ignore the first 64kB of data of every acquisition. */ | |
348 | sr_spew("Ignoring first 64kB chunk of data."); | |
349 | devc->compressed_bytes_ignored += COMPRESSED_BUF_SIZE; | |
350 | return TRUE; | |
351 | } | |
352 | ||
353 | /* TODO: Handle bytes_read which is not a multiple of 2? */ | |
354 | scanaplus_uncompress_block(devc, bytes_read); | |
355 | ||
356 | n = devc->samples_sent + (devc->bytes_received / 2); | |
357 | max = (SR_MHZ(100) / 1000) * devc->limit_msec; | |
358 | ||
359 | if (devc->limit_samples && (n >= devc->limit_samples)) { | |
695dc859 | 360 | send_samples(sdi, devc->limit_samples - devc->samples_sent); |
ab4bb6eb | 361 | sr_info("Requested number of samples reached."); |
695dc859 | 362 | sdi->driver->dev_acquisition_stop(sdi); |
ab4bb6eb UH |
363 | return TRUE; |
364 | } else if (devc->limit_msec && (n >= max)) { | |
695dc859 | 365 | send_samples(sdi, max - devc->samples_sent); |
ab4bb6eb | 366 | sr_info("Requested time limit reached."); |
695dc859 | 367 | sdi->driver->dev_acquisition_stop(sdi); |
ab4bb6eb UH |
368 | return TRUE; |
369 | } else { | |
695dc859 | 370 | send_samples(sdi, devc->bytes_received / 2); |
fdf4a1f5 UH |
371 | } |
372 | ||
373 | return TRUE; | |
374 | } |