]>
Commit | Line | Data |
---|---|---|
fdf4a1f5 UH |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
20 | ||
6ec6c43b | 21 | #include <config.h> |
fdf4a1f5 UH |
22 | #include "protocol.h" |
23 | ||
ab4bb6eb UH |
24 | #define USB_VENDOR_ID 0x0403 |
25 | #define USB_DEVICE_ID 0x6014 | |
ce95428c | 26 | #define USB_VENDOR_NAME "IKALOGIC" |
ab4bb6eb UH |
27 | #define USB_MODEL_NAME "ScanaPLUS" |
28 | #define USB_IPRODUCT "SCANAPLUS" | |
29 | ||
30 | #define SAMPLE_BUF_SIZE (8 * 1024 * 1024) | |
31 | ||
f254bc4b | 32 | static const uint32_t devopts[] = { |
ab4bb6eb | 33 | SR_CONF_LOGIC_ANALYZER, |
5827f61b BV |
34 | SR_CONF_LIMIT_SAMPLES | SR_CONF_SET, |
35 | SR_CONF_LIMIT_MSEC | SR_CONF_SET, | |
36 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
ab4bb6eb UH |
37 | }; |
38 | ||
ba7dd8bb UH |
39 | /* Channels are numbered 1-9. */ |
40 | static const char *channel_names[] = { | |
ab4bb6eb | 41 | "1", "2", "3", "4", "5", "6", "7", "8", "9", |
ab4bb6eb UH |
42 | }; |
43 | ||
ce95428c | 44 | /* Note: The IKALOGIC ScanaPLUS always samples at 100MHz. */ |
329733d9 | 45 | static const uint64_t samplerates[1] = { SR_MHZ(100) }; |
ab4bb6eb | 46 | |
695dc859 | 47 | static int dev_acquisition_stop(struct sr_dev_inst *sdi); |
ab4bb6eb UH |
48 | |
49 | static void clear_helper(void *priv) | |
50 | { | |
51 | struct dev_context *devc; | |
52 | ||
53 | devc = priv; | |
54 | ||
55 | ftdi_free(devc->ftdic); | |
56 | g_free(devc->compressed_buf); | |
57 | g_free(devc->sample_buf); | |
f817f05a | 58 | g_free(devc); |
ab4bb6eb UH |
59 | } |
60 | ||
4f840ce9 | 61 | static int dev_clear(const struct sr_dev_driver *di) |
ab4bb6eb UH |
62 | { |
63 | return std_dev_clear(di, clear_helper); | |
64 | } | |
65 | ||
4f840ce9 | 66 | static GSList *scan(struct sr_dev_driver *di, GSList *options) |
fdf4a1f5 | 67 | { |
ab4bb6eb | 68 | struct sr_dev_inst *sdi; |
ab4bb6eb | 69 | struct dev_context *devc; |
ab4bb6eb UH |
70 | unsigned int i; |
71 | int ret; | |
fdf4a1f5 UH |
72 | |
73 | (void)options; | |
74 | ||
ab4bb6eb | 75 | /* Allocate memory for our private device context. */ |
f57d8ffe | 76 | devc = g_malloc0(sizeof(struct dev_context)); |
ab4bb6eb UH |
77 | |
78 | /* Allocate memory for the incoming compressed samples. */ | |
79 | if (!(devc->compressed_buf = g_try_malloc0(COMPRESSED_BUF_SIZE))) { | |
80 | sr_err("compressed_buf malloc failed."); | |
81 | goto err_free_devc; | |
82 | } | |
83 | ||
84 | /* Allocate memory for the uncompressed samples. */ | |
85 | if (!(devc->sample_buf = g_try_malloc0(SAMPLE_BUF_SIZE))) { | |
86 | sr_err("sample_buf malloc failed."); | |
87 | goto err_free_compressed_buf; | |
88 | } | |
89 | ||
90 | /* Allocate memory for the FTDI context (ftdic) and initialize it. */ | |
91 | if (!(devc->ftdic = ftdi_new())) { | |
92 | sr_err("Failed to initialize libftdi."); | |
93 | goto err_free_sample_buf; | |
94 | } | |
95 | ||
96 | /* Check for the device and temporarily open it. */ | |
97 | ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID, | |
98 | USB_IPRODUCT, NULL); | |
99 | if (ret < 0) { | |
100 | /* Log errors, except for -3 ("device not found"). */ | |
101 | if (ret != -3) | |
102 | sr_err("Failed to open device (%d): %s", ret, | |
103 | ftdi_get_error_string(devc->ftdic)); | |
104 | goto err_free_ftdic; | |
105 | } | |
106 | ||
107 | /* Register the device with libsigrok. */ | |
aac29cc1 | 108 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); |
45884333 | 109 | sdi->status = SR_ST_INACTIVE; |
0af636be UH |
110 | sdi->vendor = g_strdup(USB_VENDOR_NAME); |
111 | sdi->model = g_strdup(USB_MODEL_NAME); | |
ab4bb6eb UH |
112 | sdi->priv = devc; |
113 | ||
0f34cb47 UH |
114 | for (i = 0; i < ARRAY_SIZE(channel_names); i++) |
115 | sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE, channel_names[i]); | |
ab4bb6eb | 116 | |
ab4bb6eb UH |
117 | /* Close device. We'll reopen it again when we need it. */ |
118 | scanaplus_close(devc); | |
fdf4a1f5 | 119 | |
43376f33 | 120 | return std_scan_complete(di, g_slist_append(NULL, sdi)); |
ab4bb6eb | 121 | |
ab4bb6eb UH |
122 | scanaplus_close(devc); |
123 | err_free_ftdic: | |
124 | ftdi_free(devc->ftdic); /* NOT free() or g_free()! */ | |
125 | err_free_sample_buf: | |
126 | g_free(devc->sample_buf); | |
127 | err_free_compressed_buf: | |
128 | g_free(devc->compressed_buf); | |
129 | err_free_devc: | |
130 | g_free(devc); | |
ab4bb6eb UH |
131 | |
132 | return NULL; | |
fdf4a1f5 UH |
133 | } |
134 | ||
fdf4a1f5 UH |
135 | static int dev_open(struct sr_dev_inst *sdi) |
136 | { | |
ab4bb6eb UH |
137 | struct dev_context *devc; |
138 | int ret; | |
139 | ||
140 | devc = sdi->priv; | |
141 | ||
142 | /* Select interface A, otherwise communication will fail. */ | |
143 | ret = ftdi_set_interface(devc->ftdic, INTERFACE_A); | |
144 | if (ret < 0) { | |
145 | sr_err("Failed to set FTDI interface A (%d): %s", ret, | |
146 | ftdi_get_error_string(devc->ftdic)); | |
147 | return SR_ERR; | |
148 | } | |
149 | sr_dbg("FTDI chip interface A set successfully."); | |
150 | ||
151 | /* Open the device. */ | |
152 | ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID, | |
153 | USB_IPRODUCT, NULL); | |
154 | if (ret < 0) { | |
155 | sr_err("Failed to open device (%d): %s", ret, | |
156 | ftdi_get_error_string(devc->ftdic)); | |
157 | return SR_ERR; | |
158 | } | |
159 | sr_dbg("FTDI device opened successfully."); | |
160 | ||
161 | /* Purge RX/TX buffers in the FTDI chip. */ | |
162 | if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) { | |
163 | sr_err("Failed to purge FTDI RX/TX buffers (%d): %s.", | |
164 | ret, ftdi_get_error_string(devc->ftdic)); | |
165 | goto err_dev_open_close_ftdic; | |
166 | } | |
167 | sr_dbg("FTDI chip buffers purged successfully."); | |
168 | ||
169 | /* Reset the FTDI bitmode. */ | |
170 | ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_RESET); | |
171 | if (ret < 0) { | |
172 | sr_err("Failed to reset the FTDI chip bitmode (%d): %s.", | |
173 | ret, ftdi_get_error_string(devc->ftdic)); | |
174 | goto err_dev_open_close_ftdic; | |
175 | } | |
176 | sr_dbg("FTDI chip bitmode reset successfully."); | |
177 | ||
178 | /* Set FTDI bitmode to "sync FIFO". */ | |
179 | ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_SYNCFF); | |
180 | if (ret < 0) { | |
181 | sr_err("Failed to put FTDI chip into sync FIFO mode (%d): %s.", | |
182 | ret, ftdi_get_error_string(devc->ftdic)); | |
183 | goto err_dev_open_close_ftdic; | |
184 | } | |
185 | sr_dbg("FTDI chip sync FIFO mode entered successfully."); | |
186 | ||
187 | /* Set the FTDI latency timer to 2. */ | |
188 | ret = ftdi_set_latency_timer(devc->ftdic, 2); | |
189 | if (ret < 0) { | |
190 | sr_err("Failed to set FTDI latency timer (%d): %s.", | |
191 | ret, ftdi_get_error_string(devc->ftdic)); | |
192 | goto err_dev_open_close_ftdic; | |
193 | } | |
194 | sr_dbg("FTDI chip latency timer set successfully."); | |
195 | ||
196 | /* Set the FTDI read data chunk size to 64kB. */ | |
197 | ret = ftdi_read_data_set_chunksize(devc->ftdic, 64 * 1024); | |
198 | if (ret < 0) { | |
199 | sr_err("Failed to set FTDI read data chunk size (%d): %s.", | |
200 | ret, ftdi_get_error_string(devc->ftdic)); | |
201 | goto err_dev_open_close_ftdic; | |
202 | } | |
203 | sr_dbg("FTDI chip read data chunk size set successfully."); | |
204 | ||
205 | /* Get the ScanaPLUS device ID from the FTDI EEPROM. */ | |
206 | if ((ret = scanaplus_get_device_id(devc)) < 0) { | |
207 | sr_err("Failed to get ScanaPLUS device ID: %d.", ret); | |
208 | goto err_dev_open_close_ftdic; | |
209 | } | |
210 | sr_dbg("Received ScanaPLUS device ID successfully: %02x %02x %02x.", | |
211 | devc->devid[0], devc->devid[1], devc->devid[2]); | |
fdf4a1f5 UH |
212 | |
213 | sdi->status = SR_ST_ACTIVE; | |
214 | ||
215 | return SR_OK; | |
ab4bb6eb UH |
216 | |
217 | err_dev_open_close_ftdic: | |
218 | scanaplus_close(devc); | |
219 | return SR_ERR; | |
fdf4a1f5 UH |
220 | } |
221 | ||
222 | static int dev_close(struct sr_dev_inst *sdi) | |
223 | { | |
ab4bb6eb UH |
224 | int ret; |
225 | struct dev_context *devc; | |
226 | ||
227 | ret = SR_OK; | |
228 | devc = sdi->priv; | |
229 | ||
230 | if (sdi->status == SR_ST_ACTIVE) { | |
231 | sr_dbg("Status ACTIVE, closing device."); | |
232 | ret = scanaplus_close(devc); | |
233 | } else { | |
234 | sr_spew("Status not ACTIVE, nothing to do."); | |
235 | } | |
fdf4a1f5 UH |
236 | |
237 | sdi->status = SR_ST_INACTIVE; | |
238 | ||
ab4bb6eb | 239 | return ret; |
fdf4a1f5 UH |
240 | } |
241 | ||
584560f1 | 242 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 243 | const struct sr_channel_group *cg) |
fdf4a1f5 | 244 | { |
fdf4a1f5 | 245 | (void)sdi; |
53b4680f | 246 | (void)cg; |
fdf4a1f5 | 247 | |
584560f1 | 248 | switch (key) { |
ab4bb6eb UH |
249 | case SR_CONF_SAMPLERATE: |
250 | /* The ScanaPLUS samplerate is 100MHz and can't be changed. */ | |
251 | *data = g_variant_new_uint64(SR_MHZ(100)); | |
252 | break; | |
fdf4a1f5 UH |
253 | default: |
254 | return SR_ERR_NA; | |
255 | } | |
256 | ||
ab4bb6eb | 257 | return SR_OK; |
fdf4a1f5 UH |
258 | } |
259 | ||
584560f1 | 260 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, |
53b4680f | 261 | const struct sr_channel_group *cg) |
fdf4a1f5 | 262 | { |
ab4bb6eb | 263 | struct dev_context *devc; |
fdf4a1f5 | 264 | |
53b4680f | 265 | (void)cg; |
d3c74a6f | 266 | |
fdf4a1f5 UH |
267 | if (sdi->status != SR_ST_ACTIVE) |
268 | return SR_ERR_DEV_CLOSED; | |
269 | ||
ab4bb6eb UH |
270 | devc = sdi->priv; |
271 | ||
584560f1 | 272 | switch (key) { |
ab4bb6eb UH |
273 | case SR_CONF_SAMPLERATE: |
274 | if (g_variant_get_uint64(data) != SR_MHZ(100)) { | |
275 | sr_err("ScanaPLUS only supports samplerate = 100MHz."); | |
276 | return SR_ERR_ARG; | |
277 | } | |
278 | /* Nothing to do, the ScanaPLUS samplerate is always 100MHz. */ | |
279 | break; | |
280 | case SR_CONF_LIMIT_MSEC: | |
281 | if (g_variant_get_uint64(data) == 0) | |
282 | return SR_ERR_ARG; | |
283 | devc->limit_msec = g_variant_get_uint64(data); | |
284 | break; | |
285 | case SR_CONF_LIMIT_SAMPLES: | |
286 | if (g_variant_get_uint64(data) == 0) | |
287 | return SR_ERR_ARG; | |
288 | devc->limit_samples = g_variant_get_uint64(data); | |
289 | break; | |
fdf4a1f5 | 290 | default: |
ab4bb6eb | 291 | return SR_ERR_NA; |
fdf4a1f5 UH |
292 | } |
293 | ||
ab4bb6eb | 294 | return SR_OK; |
fdf4a1f5 UH |
295 | } |
296 | ||
584560f1 | 297 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 298 | const struct sr_channel_group *cg) |
fdf4a1f5 | 299 | { |
ab4bb6eb UH |
300 | GVariant *gvar; |
301 | GVariantBuilder gvb; | |
fdf4a1f5 UH |
302 | |
303 | (void)sdi; | |
53b4680f | 304 | (void)cg; |
fdf4a1f5 | 305 | |
fdf4a1f5 | 306 | switch (key) { |
ab4bb6eb | 307 | case SR_CONF_DEVICE_OPTIONS: |
584560f1 | 308 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
f254bc4b | 309 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); |
ab4bb6eb UH |
310 | break; |
311 | case SR_CONF_SAMPLERATE: | |
312 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
313 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
314 | samplerates, ARRAY_SIZE(samplerates), | |
315 | sizeof(uint64_t)); | |
316 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
317 | *data = g_variant_builder_end(&gvb); | |
318 | break; | |
fdf4a1f5 UH |
319 | default: |
320 | return SR_ERR_NA; | |
321 | } | |
322 | ||
ab4bb6eb | 323 | return SR_OK; |
fdf4a1f5 UH |
324 | } |
325 | ||
695dc859 | 326 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
fdf4a1f5 | 327 | { |
ab4bb6eb UH |
328 | int ret; |
329 | struct dev_context *devc; | |
fdf4a1f5 UH |
330 | |
331 | if (sdi->status != SR_ST_ACTIVE) | |
332 | return SR_ERR_DEV_CLOSED; | |
333 | ||
208c1d35 | 334 | devc = sdi->priv; |
ab4bb6eb UH |
335 | |
336 | if (!devc->ftdic) | |
337 | return SR_ERR_BUG; | |
338 | ||
ba7dd8bb | 339 | /* TODO: Configure channels later (thresholds etc.). */ |
ab4bb6eb | 340 | |
ab4bb6eb UH |
341 | /* Properly reset internal variables before every new acquisition. */ |
342 | devc->compressed_bytes_ignored = 0; | |
343 | devc->samples_sent = 0; | |
344 | devc->bytes_received = 0; | |
345 | ||
346 | if ((ret = scanaplus_init(devc)) < 0) | |
347 | return ret; | |
348 | ||
349 | if ((ret = scanaplus_start_acquisition(devc)) < 0) | |
350 | return ret; | |
351 | ||
102f1239 | 352 | std_session_send_df_header(sdi, LOG_PREFIX); |
ab4bb6eb UH |
353 | |
354 | /* Hook up a dummy handler to receive data from the device. */ | |
c650d3ec | 355 | sr_session_source_add(sdi->session, -1, 0, 0, scanaplus_receive_data, (void *)sdi); |
ab4bb6eb | 356 | |
fdf4a1f5 UH |
357 | return SR_OK; |
358 | } | |
359 | ||
695dc859 | 360 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) |
fdf4a1f5 | 361 | { |
ab4bb6eb | 362 | sr_dbg("Stopping acquisition."); |
102f1239 | 363 | sr_session_source_remove(sdi->session, -1); |
3be42bc2 | 364 | std_session_send_df_end(sdi, LOG_PREFIX); |
fdf4a1f5 UH |
365 | |
366 | return SR_OK; | |
367 | } | |
368 | ||
dd5c48a6 | 369 | static struct sr_dev_driver ikalogic_scanaplus_driver_info = { |
fdf4a1f5 | 370 | .name = "ikalogic-scanaplus", |
ce95428c | 371 | .longname = "IKALOGIC ScanaPLUS", |
fdf4a1f5 | 372 | .api_version = 1, |
c2fdcc25 | 373 | .init = std_init, |
700d6b64 | 374 | .cleanup = std_cleanup, |
fdf4a1f5 | 375 | .scan = scan, |
c01bf34c | 376 | .dev_list = std_dev_list, |
fdf4a1f5 UH |
377 | .dev_clear = dev_clear, |
378 | .config_get = config_get, | |
379 | .config_set = config_set, | |
380 | .config_list = config_list, | |
381 | .dev_open = dev_open, | |
382 | .dev_close = dev_close, | |
383 | .dev_acquisition_start = dev_acquisition_start, | |
384 | .dev_acquisition_stop = dev_acquisition_stop, | |
41812aca | 385 | .context = NULL, |
fdf4a1f5 | 386 | }; |
dd5c48a6 | 387 | SR_REGISTER_DEV_DRIVER(ikalogic_scanaplus_driver_info); |