]>
Commit | Line | Data |
---|---|---|
16e76bae MS |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Marc Schink <sigrok-dev@marcschink.de> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #ifndef LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H | |
21 | #define LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H | |
22 | ||
e52e712d MS |
23 | #include <stdlib.h> |
24 | #include <string.h> | |
16e76bae MS |
25 | #include <stdint.h> |
26 | #include <glib.h> | |
c1aae900 | 27 | #include <libsigrok/libsigrok.h> |
16e76bae MS |
28 | #include "libsigrok-internal.h" |
29 | ||
3544f848 | 30 | #define LOG_PREFIX "ikalogic-scanalogic2" |
16e76bae | 31 | |
e52e712d MS |
32 | #define USB_VID_PID "20a0.4123" |
33 | #define USB_INTERFACE 0 | |
1a46cc62 | 34 | #define USB_TIMEOUT_MS (5 * 1000) |
e52e712d MS |
35 | |
36 | #define USB_REQUEST_TYPE_IN (LIBUSB_REQUEST_TYPE_CLASS | \ | |
37 | LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_IN) | |
38 | ||
39 | #define USB_REQUEST_TYPE_OUT (LIBUSB_REQUEST_TYPE_CLASS | \ | |
40 | LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_OUT) | |
41 | ||
fb8d593c | 42 | #define USB_HID_GET_REPORT 0x01 |
e52e712d MS |
43 | #define USB_HID_SET_REPORT 0x09 |
44 | #define USB_HID_REPORT_TYPE_FEATURE 0x300 | |
45 | ||
46 | #define NUM_SAMPLERATES 11 | |
3f239f08 | 47 | #define NUM_CHANNELS 4 |
e52e712d | 48 | |
e52e712d MS |
49 | /* |
50 | * Number of sample bytes and samples the device can acquire. Note that the | |
51 | * vendor software can acquire 32736 sample bytes only but the device is capable | |
52 | * to acquire up to 32766 sample bytes. | |
53 | */ | |
54 | #define MAX_DEV_SAMPLE_BYTES 32766 | |
55 | #define MAX_DEV_SAMPLES (MAX_INT_SAMPLE_BYTES * 8) | |
56 | ||
57 | /* Number of sample bytes and samples the driver can acquire. */ | |
58 | #define MAX_SAMPLE_BYTES (MAX_DEV_SAMPLE_BYTES - 1) | |
59 | #define MAX_SAMPLES (MAX_SAMPLE_BYTES * 8) | |
60 | ||
61 | /* Maximum time that the trigger can be delayed in milliseconds. */ | |
62 | #define MAX_AFTER_TRIGGER_DELAY 65000 | |
63 | ||
64 | #define PACKET_LENGTH 128 | |
65 | ||
66 | /* Number of sample bytes per packet where a sample byte contains 8 samples. */ | |
67 | #define PACKET_NUM_SAMPLE_BYTES 124 | |
68 | ||
69 | /* Number of samples per packet. */ | |
70 | #define PACKET_NUM_SAMPLES (PACKET_NUM_SAMPLE_BYTES * 8) | |
71 | ||
72 | #define DEFAULT_SAMPLERATE SR_KHZ(1.25) | |
73 | ||
74 | /* | |
75 | * Time interval between the last status of available data received and the | |
76 | * moment when the next status request will be sent in microseconds. | |
77 | */ | |
78 | #define WAIT_DATA_READY_INTERVAL 1500000 | |
79 | ||
80 | #define CMD_SAMPLE 0x01 | |
81 | #define CMD_RESET 0x02 | |
82 | #define CMD_IDLE 0x07 | |
83 | #define CMD_INFO 0x0a | |
84 | ||
85 | #define TRIGGER_CHANNEL_ALL 0x00 | |
86 | #define TRIGGER_CHANNEL_0 0x01 | |
87 | #define TRIGGER_CHANNEL_1 0x02 | |
88 | #define TRIGGER_CHANNEL_2 0x03 | |
89 | ||
90 | #define TRIGGER_TYPE_NEGEDGE 0x00 | |
91 | #define TRIGGER_TYPE_POSEDGE 0x01 | |
92 | #define TRIGGER_TYPE_ANYEDGE 0x02 | |
93 | #define TRIGGER_TYPE_NONE 0x03 | |
94 | ||
95 | #define STATUS_DATA_READY 0x60 | |
96 | #define STATUS_WAITING_FOR_TRIGGER 0x61 | |
97 | #define STATUS_SAMPLING 0x62 | |
98 | #define STATUS_DEVICE_READY 0x63 | |
99 | ||
100 | struct device_info { | |
101 | /* Serial number of the device. */ | |
102 | uint32_t serial; | |
103 | ||
104 | /* Major version of the firmware. */ | |
105 | uint8_t fw_ver_major; | |
106 | ||
107 | /* Minor version of the firmware. */ | |
108 | uint8_t fw_ver_minor; | |
109 | }; | |
110 | ||
111 | enum { | |
112 | STATE_IDLE = 0, | |
113 | STATE_SAMPLE, | |
114 | STATE_WAIT_DATA_READY, | |
115 | STATE_RECEIVE_DATA, | |
116 | STATE_RESET_AND_IDLE, | |
117 | STATE_WAIT_DEVICE_READY | |
118 | }; | |
119 | ||
16e76bae | 120 | struct dev_context { |
e52e712d MS |
121 | /* Current selected samplerate. */ |
122 | uint64_t samplerate; | |
123 | ||
124 | /* Device specific identifier for the current samplerate. */ | |
125 | uint8_t samplerate_id; | |
126 | ||
127 | /* Current sampling limit. */ | |
128 | uint64_t limit_samples; | |
129 | ||
130 | /* Calculated number of pre-trigger samples. */ | |
131 | uint64_t pre_trigger_samples; | |
132 | ||
133 | /* Number of pre- and post-trigger sample bytes to acquire. */ | |
134 | uint16_t pre_trigger_bytes; | |
135 | uint16_t post_trigger_bytes; | |
136 | ||
137 | /* Device specific settings for the trigger. */ | |
138 | uint8_t trigger_channel; | |
139 | uint8_t trigger_type; | |
140 | ||
efad7ccc | 141 | uint64_t capture_ratio; |
e52e712d MS |
142 | |
143 | /* Time that the trigger will be delayed in milliseconds. */ | |
144 | uint16_t after_trigger_delay; | |
145 | ||
ba7dd8bb | 146 | /* Array to provide an index based access to all channels. */ |
3f239f08 | 147 | const struct sr_channel *channels[NUM_CHANNELS]; |
e52e712d | 148 | |
e52e712d MS |
149 | struct libusb_transfer *xfer_in, *xfer_out; |
150 | ||
151 | /* | |
152 | * Buffer to store setup and payload data for incoming and outgoing | |
153 | * transfers. | |
154 | */ | |
155 | uint8_t xfer_buf_in[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH]; | |
156 | uint8_t xfer_buf_out[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH]; | |
157 | ||
158 | /* Pointers to the payload of incoming and outgoing transfers. */ | |
159 | uint8_t *xfer_data_in, *xfer_data_out; | |
160 | ||
161 | /* Current state of the state machine */ | |
162 | unsigned int state; | |
163 | ||
164 | /* Next state of the state machine. */ | |
165 | unsigned int next_state; | |
166 | ||
167 | /* | |
168 | * Locking variable to ensure that no status about available data will | |
169 | * be requested until the last status was received. | |
170 | */ | |
171 | gboolean wait_data_ready_locked; | |
172 | ||
173 | /* | |
174 | * Time when the last response about the status of available data was | |
175 | * received. | |
176 | */ | |
177 | int64_t wait_data_ready_time; | |
178 | ||
179 | /* | |
180 | * Indicates that stopping of the acquisition is currently in progress. | |
181 | */ | |
182 | gboolean stopping_in_progress; | |
183 | ||
184 | /* | |
185 | * Buffer which contains the samples received from the device for each | |
186 | * channel except the last one. The samples of the last channel will be | |
187 | * processed directly after they will be received. | |
188 | */ | |
3f239f08 | 189 | uint8_t sample_buffer[NUM_CHANNELS - 1][MAX_DEV_SAMPLE_BYTES]; |
e52e712d MS |
190 | |
191 | /* Expected number of sample packets for each channel. */ | |
192 | uint16_t num_sample_packets; | |
193 | ||
194 | /* Number of samples already processed. */ | |
195 | uint64_t samples_processed; | |
196 | ||
197 | /* Sample packet number that is currently processed. */ | |
198 | uint16_t sample_packet; | |
16e76bae | 199 | |
e52e712d MS |
200 | /* Channel number that is currently processed. */ |
201 | uint8_t channel; | |
16e76bae | 202 | |
ba7dd8bb UH |
203 | /* Number of enabled channels. */ |
204 | unsigned int num_enabled_channels; | |
16e76bae | 205 | |
ba7dd8bb | 206 | /* Array to provide a sequential access to all enabled channel indices. */ |
3f239f08 | 207 | uint8_t channel_map[NUM_CHANNELS]; |
16e76bae | 208 | |
e52e712d MS |
209 | /* Indicates whether a transfer failed. */ |
210 | gboolean transfer_error; | |
16e76bae MS |
211 | }; |
212 | ||
79914b3a | 213 | SR_PRIV int ikalogic_scanalogic2_receive_data(int fd, int revents, void *cb_data); |
55462b8b UH |
214 | SR_PRIV void LIBUSB_CALL sl2_receive_transfer_in(struct libusb_transfer *transfer); |
215 | SR_PRIV void LIBUSB_CALL sl2_receive_transfer_out(struct libusb_transfer *transfer); | |
79914b3a | 216 | SR_PRIV int sl2_set_samplerate(const struct sr_dev_inst *sdi, |
e52e712d | 217 | uint64_t samplerate); |
79914b3a UH |
218 | SR_PRIV int sl2_set_limit_samples(const struct sr_dev_inst *sdi, |
219 | uint64_t limit_samples); | |
02d5c0d8 | 220 | SR_PRIV int sl2_convert_trigger(const struct sr_dev_inst *sdi); |
79914b3a UH |
221 | SR_PRIV int sl2_set_after_trigger_delay(const struct sr_dev_inst *sdi, |
222 | uint64_t after_trigger_delay); | |
223 | SR_PRIV void sl2_calculate_trigger_samples(const struct sr_dev_inst *sdi); | |
e32862eb LPC |
224 | SR_PRIV int sl2_get_device_info(struct sr_dev_driver *di, |
225 | struct sr_usb_dev_inst usb, struct device_info *dev_info); | |
79914b3a UH |
226 | SR_PRIV int sl2_transfer_in(libusb_device_handle *dev_handle, uint8_t *data); |
227 | SR_PRIV int sl2_transfer_out(libusb_device_handle *dev_handle, uint8_t *data); | |
16e76bae MS |
228 | |
229 | #endif |