]>
Commit | Line | Data |
---|---|---|
6e8d31d4 UH |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
803db07a | 4 | * Copyright (C) 2015-2016 Uwe Hermann <uwe@hermann-uwe.de> |
6e8d31d4 UH |
5 | * |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
2ea1fdf1 | 17 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
6e8d31d4 UH |
18 | */ |
19 | ||
20 | #include <config.h> | |
803db07a | 21 | #include <string.h> |
6e8d31d4 UH |
22 | #include "protocol.h" |
23 | ||
803db07a UH |
24 | #define SERIALCOMM "115200/8n1" |
25 | ||
26 | #define CMD_VERSION "version\r\n" | |
27 | #define CMD_MONITOR "monitor 200\r\n" | |
28 | ||
29 | static const uint32_t scanopts[] = { | |
30 | SR_CONF_CONN, | |
31 | SR_CONF_SERIALCOMM, | |
32 | }; | |
33 | ||
34 | static const uint32_t drvopts[] = { | |
35 | SR_CONF_ELECTRONIC_LOAD, | |
36 | }; | |
37 | ||
38 | static const uint32_t devopts[] = { | |
e91bb0a6 | 39 | SR_CONF_CONTINUOUS, |
803db07a UH |
40 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, |
41 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
42 | }; | |
43 | ||
44 | static const uint32_t devopts_cg[] = { | |
8501448c | 45 | SR_CONF_ENABLED | SR_CONF_SET, |
803db07a UH |
46 | SR_CONF_REGULATION | SR_CONF_GET, |
47 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
48 | SR_CONF_CURRENT | SR_CONF_GET, | |
49 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
50 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET, | |
51 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET, | |
52 | SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET, | |
53 | SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, | |
2217be1d UH |
54 | SR_CONF_UNDER_VOLTAGE_CONDITION | SR_CONF_GET, |
55 | SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE | SR_CONF_GET, | |
803db07a UH |
56 | }; |
57 | ||
6e8d31d4 UH |
58 | static GSList *scan(struct sr_dev_driver *di, GSList *options) |
59 | { | |
803db07a | 60 | struct sr_dev_inst *sdi; |
803db07a UH |
61 | struct dev_context *devc; |
62 | struct sr_config *src; | |
63 | struct sr_serial_dev_inst *serial; | |
64 | struct sr_channel_group *cg; | |
65 | struct sr_channel *ch; | |
43376f33 | 66 | GSList *l; |
803db07a UH |
67 | int ret, len; |
68 | const char *conn, *serialcomm; | |
69 | char buf[100]; | |
70 | char *bufptr; | |
8084e0fa | 71 | double version; |
6e8d31d4 | 72 | |
803db07a UH |
73 | conn = serialcomm = NULL; |
74 | for (l = options; l; l = l->next) { | |
75 | src = l->data; | |
76 | switch (src->key) { | |
77 | case SR_CONF_CONN: | |
78 | conn = g_variant_get_string(src->data, NULL); | |
79 | break; | |
80 | case SR_CONF_SERIALCOMM: | |
81 | serialcomm = g_variant_get_string(src->data, NULL); | |
82 | break; | |
83 | } | |
84 | } | |
85 | if (!conn) | |
86 | return NULL; | |
87 | if (!serialcomm) | |
88 | serialcomm = SERIALCOMM; | |
89 | ||
90 | serial = sr_serial_dev_inst_new(conn, serialcomm); | |
91 | ||
92 | if (serial_open(serial, SERIAL_RDWR) != SR_OK) | |
93 | return NULL; | |
94 | ||
95 | serial_flush(serial); | |
96 | ||
97 | if (serial_write_blocking(serial, CMD_VERSION, | |
98 | strlen(CMD_VERSION), serial_timeout(serial, | |
99 | strlen(CMD_VERSION))) < (int)strlen(CMD_VERSION)) { | |
100 | sr_dbg("Unable to write while probing for hardware."); | |
101 | serial_close(serial); | |
102 | return NULL; | |
103 | } | |
104 | ||
105 | memset(buf, 0, sizeof(buf)); | |
106 | bufptr = buf; | |
107 | len = sizeof(buf); | |
108 | ret = serial_readline(serial, &bufptr, &len, 3000); | |
109 | ||
110 | if (ret < 0 || len < 9 || strncmp((const char *)&buf, "version ", 8)) { | |
111 | sr_dbg("Unable to probe version number."); | |
112 | serial_close(serial); | |
113 | return NULL; | |
114 | } | |
115 | ||
8084e0fa UH |
116 | version = g_ascii_strtod(buf + 8, NULL); |
117 | if (version < 1.10) { | |
118 | sr_info("Firmware >= 1.10 required (got %1.2f).", version); | |
119 | serial_close(serial); | |
120 | return NULL; | |
121 | } | |
122 | ||
803db07a | 123 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); |
45884333 | 124 | sdi->status = SR_ST_INACTIVE; |
803db07a UH |
125 | sdi->vendor = g_strdup("Arachnid Labs"); |
126 | sdi->model = g_strdup("Re:load Pro"); | |
127 | sdi->version = g_strdup(buf + 8); | |
803db07a UH |
128 | sdi->inst_type = SR_INST_SERIAL; |
129 | sdi->conn = serial; | |
130 | ||
131 | cg = g_malloc0(sizeof(struct sr_channel_group)); | |
132 | cg->name = g_strdup("1"); | |
133 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
134 | ||
135 | ch = sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "V"); | |
136 | cg->channels = g_slist_append(cg->channels, ch); | |
137 | ||
138 | ch = sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "I"); | |
139 | cg->channels = g_slist_append(cg->channels, ch); | |
140 | ||
141 | devc = g_malloc0(sizeof(struct dev_context)); | |
014c7f93 | 142 | sr_sw_limits_init(&devc->limits); |
803db07a | 143 | sdi->priv = devc; |
803db07a UH |
144 | |
145 | serial_close(serial); | |
803db07a | 146 | |
43376f33 | 147 | return std_scan_complete(di, g_slist_append(NULL, sdi)); |
6e8d31d4 UH |
148 | } |
149 | ||
803db07a UH |
150 | static int config_list(uint32_t key, GVariant **data, |
151 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
6e8d31d4 | 152 | { |
803db07a | 153 | if (!cg) { |
e66d1892 | 154 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); |
803db07a UH |
155 | } else { |
156 | switch (key) { | |
157 | case SR_CONF_DEVICE_OPTIONS: | |
53012da6 | 158 | *data = std_gvar_array_u32(ARRAY_AND_SIZE(devopts_cg)); |
803db07a UH |
159 | break; |
160 | case SR_CONF_CURRENT_LIMIT: | |
54d471f4 | 161 | *data = std_gvar_min_max_step(0.0, 6.0, 0.001); |
803db07a UH |
162 | break; |
163 | default: | |
164 | return SR_ERR_NA; | |
165 | } | |
166 | } | |
167 | ||
a9010323 | 168 | return SR_OK; |
6e8d31d4 UH |
169 | } |
170 | ||
171 | static int config_get(uint32_t key, GVariant **data, | |
172 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
173 | { | |
803db07a | 174 | struct dev_context *devc; |
803db07a | 175 | float fvalue; |
6e8d31d4 | 176 | |
6e8d31d4 UH |
177 | (void)cg; |
178 | ||
803db07a UH |
179 | devc = sdi->priv; |
180 | ||
181 | /* | |
182 | * These features/keys are not supported by the hardware: | |
183 | * - SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | |
184 | * - SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | |
185 | * - SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | |
186 | * - SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | |
8501448c | 187 | * - SR_CONF_ENABLED (state cannot be queried, only set) |
803db07a UH |
188 | */ |
189 | ||
6e8d31d4 | 190 | switch (key) { |
803db07a | 191 | case SR_CONF_LIMIT_SAMPLES: |
803db07a | 192 | case SR_CONF_LIMIT_MSEC: |
014c7f93 | 193 | return sr_sw_limits_config_get(&devc->limits, key, data); |
803db07a UH |
194 | case SR_CONF_REGULATION: |
195 | *data = g_variant_new_string("CC"); /* Always CC mode. */ | |
196 | break; | |
197 | case SR_CONF_VOLTAGE: | |
198 | if (reloadpro_get_voltage_current(sdi, &fvalue, NULL) < 0) | |
199 | return SR_ERR; | |
200 | *data = g_variant_new_double(fvalue); | |
201 | break; | |
202 | case SR_CONF_CURRENT: | |
203 | if (reloadpro_get_voltage_current(sdi, NULL, &fvalue) < 0) | |
204 | return SR_ERR; | |
205 | *data = g_variant_new_double(fvalue); | |
206 | break; | |
207 | case SR_CONF_CURRENT_LIMIT: | |
208 | if (reloadpro_get_current_limit(sdi, &fvalue) == SR_OK) | |
209 | *data = g_variant_new_double(fvalue); | |
210 | break; | |
211 | case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED: | |
212 | *data = g_variant_new_boolean(TRUE); /* Always on. */ | |
213 | break; | |
214 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: | |
215 | *data = g_variant_new_boolean(TRUE); /* Always on. */ | |
216 | break; | |
217 | case SR_CONF_OVER_TEMPERATURE_PROTECTION: | |
218 | *data = g_variant_new_boolean(TRUE); /* Always on. */ | |
219 | break; | |
220 | case SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE: | |
221 | *data = g_variant_new_boolean(devc->otp_active); | |
222 | break; | |
2217be1d UH |
223 | case SR_CONF_UNDER_VOLTAGE_CONDITION: |
224 | *data = g_variant_new_boolean(TRUE); /* Always on. */ | |
225 | break; | |
226 | case SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE: | |
227 | *data = g_variant_new_boolean(devc->uvc_active); | |
228 | break; | |
6e8d31d4 UH |
229 | default: |
230 | return SR_ERR_NA; | |
231 | } | |
232 | ||
a9010323 | 233 | return SR_OK; |
6e8d31d4 UH |
234 | } |
235 | ||
236 | static int config_set(uint32_t key, GVariant *data, | |
237 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
238 | { | |
803db07a | 239 | struct dev_context *devc; |
6e8d31d4 | 240 | |
6e8d31d4 UH |
241 | (void)cg; |
242 | ||
803db07a UH |
243 | devc = sdi->priv; |
244 | ||
6e8d31d4 | 245 | switch (key) { |
803db07a | 246 | case SR_CONF_LIMIT_SAMPLES: |
cd04f641 | 247 | case SR_CONF_LIMIT_MSEC: |
014c7f93 | 248 | return sr_sw_limits_config_set(&devc->limits, key, data); |
8501448c | 249 | case SR_CONF_ENABLED: |
758906aa | 250 | return reloadpro_set_on_off(sdi, g_variant_get_boolean(data)); |
803db07a | 251 | case SR_CONF_CURRENT_LIMIT: |
758906aa | 252 | return reloadpro_set_current_limit(sdi, g_variant_get_double(data)); |
6e8d31d4 | 253 | default: |
758906aa | 254 | return SR_ERR_NA; |
6e8d31d4 UH |
255 | } |
256 | ||
758906aa | 257 | return SR_OK; |
6e8d31d4 UH |
258 | } |
259 | ||
695dc859 | 260 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
6e8d31d4 UH |
261 | { |
262 | int ret; | |
803db07a UH |
263 | struct dev_context *devc; |
264 | struct sr_serial_dev_inst *serial; | |
6e8d31d4 | 265 | |
803db07a | 266 | devc = sdi->priv; |
803db07a UH |
267 | serial = sdi->conn; |
268 | ||
269 | /* Send the 'monitor <ms>' command (doesn't have a reply). */ | |
270 | if ((ret = serial_write_blocking(serial, CMD_MONITOR, | |
271 | strlen(CMD_MONITOR), serial_timeout(serial, | |
272 | strlen(CMD_MONITOR)))) < (int)strlen(CMD_MONITOR)) { | |
273 | sr_err("Unable to send 'monitor' command: %d.", ret); | |
274 | return SR_ERR; | |
6e8d31d4 UH |
275 | } |
276 | ||
803db07a UH |
277 | serial_source_add(sdi->session, serial, G_IO_IN, 100, |
278 | reloadpro_receive_data, (void *)sdi); | |
6e8d31d4 | 279 | |
014c7f93 | 280 | sr_sw_limits_acquisition_start(&devc->limits); |
bee2b016 | 281 | std_session_send_df_header(sdi); |
6e8d31d4 | 282 | |
803db07a UH |
283 | memset(devc->buf, 0, RELOADPRO_BUFSIZE); |
284 | devc->buflen = 0; | |
6e8d31d4 UH |
285 | |
286 | return SR_OK; | |
287 | } | |
288 | ||
dd5c48a6 | 289 | static struct sr_dev_driver arachnid_labs_re_load_pro_driver_info = { |
6e8d31d4 UH |
290 | .name = "arachnid-labs-re-load-pro", |
291 | .longname = "Arachnid Labs Re:load Pro", | |
292 | .api_version = 1, | |
c2fdcc25 | 293 | .init = std_init, |
700d6b64 | 294 | .cleanup = std_cleanup, |
6e8d31d4 | 295 | .scan = scan, |
c01bf34c | 296 | .dev_list = std_dev_list, |
f778bf02 | 297 | .dev_clear = std_dev_clear, |
6e8d31d4 UH |
298 | .config_get = config_get, |
299 | .config_set = config_set, | |
300 | .config_list = config_list, | |
803db07a UH |
301 | .dev_open = std_serial_dev_open, |
302 | .dev_close = std_serial_dev_close, | |
6e8d31d4 | 303 | .dev_acquisition_start = dev_acquisition_start, |
4b1a9d5d | 304 | .dev_acquisition_stop = std_serial_dev_acquisition_stop, |
6e8d31d4 UH |
305 | .context = NULL, |
306 | }; | |
dd5c48a6 | 307 | SR_REGISTER_DEV_DRIVER(arachnid_labs_re_load_pro_driver_info); |