]>
Commit | Line | Data |
---|---|---|
6c701476 | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
6c701476 UH |
3 | * |
4 | * Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de> | |
8c1adf37 | 5 | * Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com> |
6c701476 UH |
6 | * |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
20 | */ | |
21 | ||
22 | /* | |
23 | * Fortune Semiconductor FS9721_LP3/FS9721B protocol parser. | |
24 | * | |
25 | * FS9721_LP3: 4000 counts (3 3/4 digits) | |
26 | * FS9721B/Q100: 2400 counts (3 2/3 digits) | |
27 | * | |
28 | * Same for both chips: | |
29 | * - Packages: Bare die (78 pins) or QFP-100 | |
30 | * - Communication parameters: Unidirectional, 2400/8n1 | |
31 | * - The protocol seems to be exactly the same. | |
32 | */ | |
33 | ||
6ec6c43b | 34 | #include <config.h> |
6c701476 UH |
35 | #include <string.h> |
36 | #include <ctype.h> | |
37 | #include <math.h> | |
38 | #include <glib.h> | |
c1aae900 | 39 | #include <libsigrok/libsigrok.h> |
6c701476 UH |
40 | #include "libsigrok-internal.h" |
41 | ||
3544f848 | 42 | #define LOG_PREFIX "fs9721" |
6c701476 UH |
43 | |
44 | static int parse_digit(uint8_t b) | |
45 | { | |
46 | switch (b) { | |
47 | case 0x7d: | |
48 | return 0; | |
49 | case 0x05: | |
50 | return 1; | |
51 | case 0x5b: | |
52 | return 2; | |
53 | case 0x1f: | |
54 | return 3; | |
55 | case 0x27: | |
56 | return 4; | |
57 | case 0x3e: | |
58 | return 5; | |
59 | case 0x7e: | |
60 | return 6; | |
61 | case 0x15: | |
62 | return 7; | |
63 | case 0x7f: | |
64 | return 8; | |
65 | case 0x3f: | |
66 | return 9; | |
67 | default: | |
ec5186f9 | 68 | sr_dbg("Invalid digit byte: 0x%02x.", b); |
6c701476 UH |
69 | return -1; |
70 | } | |
71 | } | |
72 | ||
8c1adf37 UH |
73 | static gboolean sync_nibbles_valid(const uint8_t *buf) |
74 | { | |
75 | int i; | |
76 | ||
77 | /* Check the synchronization nibbles, and make sure they all match. */ | |
78 | for (i = 0; i < FS9721_PACKET_SIZE; i++) { | |
79 | if (((buf[i] >> 4) & 0x0f) != (i + 1)) { | |
ec5186f9 | 80 | sr_dbg("Sync nibble in byte %d (0x%02x) is invalid.", |
8c1adf37 UH |
81 | i, buf[i]); |
82 | return FALSE; | |
83 | } | |
84 | } | |
85 | ||
86 | return TRUE; | |
87 | } | |
88 | ||
89 | static gboolean flags_valid(const struct fs9721_info *info) | |
90 | { | |
91 | int count; | |
92 | ||
93 | /* Does the packet have more than one multiplier? */ | |
94 | count = 0; | |
95 | count += (info->is_nano) ? 1 : 0; | |
96 | count += (info->is_micro) ? 1 : 0; | |
97 | count += (info->is_milli) ? 1 : 0; | |
98 | count += (info->is_kilo) ? 1 : 0; | |
99 | count += (info->is_mega) ? 1 : 0; | |
100 | if (count > 1) { | |
ec5186f9 | 101 | sr_dbg("More than one multiplier detected in packet."); |
8c1adf37 UH |
102 | return FALSE; |
103 | } | |
104 | ||
105 | /* Does the packet "measure" more than one type of value? */ | |
106 | count = 0; | |
107 | count += (info->is_hz) ? 1 : 0; | |
108 | count += (info->is_ohm) ? 1 : 0; | |
109 | count += (info->is_farad) ? 1 : 0; | |
110 | count += (info->is_ampere) ? 1 : 0; | |
111 | count += (info->is_volt) ? 1 : 0; | |
112 | count += (info->is_percent) ? 1 : 0; | |
113 | if (count > 1) { | |
ec5186f9 | 114 | sr_dbg("More than one measurement type detected in packet."); |
8c1adf37 UH |
115 | return FALSE; |
116 | } | |
117 | ||
118 | /* Both AC and DC set? */ | |
119 | if (info->is_ac && info->is_dc) { | |
ec5186f9 | 120 | sr_dbg("Both AC and DC flags detected in packet."); |
8c1adf37 UH |
121 | return FALSE; |
122 | } | |
123 | ||
124 | /* RS232 flag not set? */ | |
125 | if (!info->is_rs232) { | |
ec5186f9 | 126 | sr_dbg("No RS232 flag detected in packet."); |
8c1adf37 UH |
127 | return FALSE; |
128 | } | |
129 | ||
130 | return TRUE; | |
131 | } | |
132 | ||
6c701476 UH |
133 | static int parse_value(const uint8_t *buf, float *result) |
134 | { | |
135 | int i, sign, intval = 0, digits[4]; | |
136 | uint8_t digit_bytes[4]; | |
137 | float floatval; | |
138 | ||
139 | /* Byte 1: LCD SEG2 */ | |
140 | sign = ((buf[1] & (1 << 3)) != 0) ? -1 : 1; | |
141 | ||
142 | /* | |
143 | * Bytes 1-8: Value (4 decimal digits, sign, decimal point) | |
144 | * | |
145 | * Over limit: "0L" (LCD), 0x00 0x7d 0x68 0x00 (digit bytes). | |
146 | */ | |
147 | ||
148 | /* Merge the two nibbles for a digit into one byte. */ | |
149 | for (i = 0; i < 4; i++) { | |
150 | digit_bytes[i] = ((buf[1 + (i * 2)] & 0x0f) << 4); | |
151 | digit_bytes[i] |= (buf[1 + (i * 2) + 1] & 0x0f); | |
152 | ||
153 | /* Bit 7 in the byte is not part of the digit. */ | |
154 | digit_bytes[i] &= ~(1 << 7); | |
155 | } | |
156 | ||
157 | /* Check for "OL". */ | |
158 | if (digit_bytes[0] == 0x00 && digit_bytes[1] == 0x7d && | |
159 | digit_bytes[2] == 0x68 && digit_bytes[3] == 0x00) { | |
160 | sr_spew("Over limit."); | |
161 | *result = INFINITY; | |
162 | return SR_OK; | |
163 | } | |
164 | ||
165 | /* Parse the digits. */ | |
166 | for (i = 0; i < 4; i++) | |
167 | digits[i] = parse_digit(digit_bytes[i]); | |
168 | sr_spew("Digits: %02x %02x %02x %02x (%d%d%d%d).", | |
169 | digit_bytes[0], digit_bytes[1], digit_bytes[2], digit_bytes[3], | |
170 | digits[0], digits[1], digits[2], digits[3]); | |
171 | ||
172 | /* Merge all digits into an integer value. */ | |
173 | for (i = 0; i < 4; i++) { | |
174 | intval *= 10; | |
175 | intval += digits[i]; | |
176 | } | |
177 | ||
6c701476 UH |
178 | floatval = (float)intval; |
179 | ||
180 | /* Decimal point position. */ | |
181 | if ((buf[3] & (1 << 3)) != 0) { | |
182 | floatval /= 1000; | |
183 | sr_spew("Decimal point after first digit."); | |
184 | } else if ((buf[5] & (1 << 3)) != 0) { | |
185 | floatval /= 100; | |
186 | sr_spew("Decimal point after second digit."); | |
187 | } else if ((buf[7] & (1 << 3)) != 0) { | |
188 | floatval /= 10; | |
189 | sr_spew("Decimal point after third digit."); | |
190 | } else { | |
191 | sr_spew("No decimal point in the number."); | |
192 | } | |
193 | ||
194 | /* Apply sign. */ | |
195 | floatval *= sign; | |
196 | ||
197 | sr_spew("The display value is %f.", floatval); | |
198 | ||
199 | *result = floatval; | |
200 | ||
201 | return SR_OK; | |
202 | } | |
203 | ||
8c1adf37 | 204 | static void parse_flags(const uint8_t *buf, struct fs9721_info *info) |
6c701476 | 205 | { |
6c701476 | 206 | /* Byte 0: LCD SEG1 */ |
8c1adf37 UH |
207 | info->is_ac = (buf[0] & (1 << 3)) != 0; |
208 | info->is_dc = (buf[0] & (1 << 2)) != 0; | |
209 | info->is_auto = (buf[0] & (1 << 1)) != 0; | |
210 | info->is_rs232 = (buf[0] & (1 << 0)) != 0; | |
211 | ||
212 | /* Byte 1: LCD SEG2 */ | |
213 | info->is_sign = (buf[1] & (1 << 3)) != 0; | |
6c701476 UH |
214 | |
215 | /* Byte 9: LCD SEG10 */ | |
8c1adf37 UH |
216 | info->is_micro = (buf[9] & (1 << 3)) != 0; |
217 | info->is_nano = (buf[9] & (1 << 2)) != 0; | |
218 | info->is_kilo = (buf[9] & (1 << 1)) != 0; | |
219 | info->is_diode = (buf[9] & (1 << 0)) != 0; | |
6c701476 UH |
220 | |
221 | /* Byte 10: LCD SEG11 */ | |
8c1adf37 UH |
222 | info->is_milli = (buf[10] & (1 << 3)) != 0; |
223 | info->is_percent = (buf[10] & (1 << 2)) != 0; | |
224 | info->is_mega = (buf[10] & (1 << 1)) != 0; | |
225 | info->is_beep = (buf[10] & (1 << 0)) != 0; | |
6c701476 UH |
226 | |
227 | /* Byte 11: LCD SEG12 */ | |
8c1adf37 UH |
228 | info->is_farad = (buf[11] & (1 << 3)) != 0; |
229 | info->is_ohm = (buf[11] & (1 << 2)) != 0; | |
230 | info->is_rel = (buf[11] & (1 << 1)) != 0; | |
231 | info->is_hold = (buf[11] & (1 << 0)) != 0; | |
6c701476 UH |
232 | |
233 | /* Byte 12: LCD SEG13 */ | |
8c1adf37 UH |
234 | info->is_ampere = (buf[12] & (1 << 3)) != 0; |
235 | info->is_volt = (buf[12] & (1 << 2)) != 0; | |
236 | info->is_hz = (buf[12] & (1 << 1)) != 0; | |
237 | info->is_bat = (buf[12] & (1 << 0)) != 0; | |
6c701476 UH |
238 | |
239 | /* Byte 13: LCD SEG14 */ | |
8c1adf37 UH |
240 | info->is_c2c1_11 = (buf[13] & (1 << 3)) != 0; |
241 | info->is_c2c1_10 = (buf[13] & (1 << 2)) != 0; | |
242 | info->is_c2c1_01 = (buf[13] & (1 << 1)) != 0; | |
243 | info->is_c2c1_00 = (buf[13] & (1 << 0)) != 0; | |
244 | } | |
6c701476 | 245 | |
5faebab2 | 246 | static void handle_flags(struct sr_datafeed_analog_old *analog, float *floatval, |
8c1adf37 UH |
247 | const struct fs9721_info *info) |
248 | { | |
6c701476 | 249 | /* Factors */ |
8c1adf37 | 250 | if (info->is_nano) |
6c701476 | 251 | *floatval /= 1000000000; |
8c1adf37 | 252 | if (info->is_micro) |
6c701476 | 253 | *floatval /= 1000000; |
8c1adf37 | 254 | if (info->is_milli) |
6c701476 | 255 | *floatval /= 1000; |
8c1adf37 | 256 | if (info->is_kilo) |
6c701476 | 257 | *floatval *= 1000; |
8c1adf37 | 258 | if (info->is_mega) |
6c701476 UH |
259 | *floatval *= 1000000; |
260 | ||
261 | /* Measurement modes */ | |
8c1adf37 | 262 | if (info->is_volt) { |
6c701476 UH |
263 | analog->mq = SR_MQ_VOLTAGE; |
264 | analog->unit = SR_UNIT_VOLT; | |
265 | } | |
8c1adf37 | 266 | if (info->is_ampere) { |
6c701476 UH |
267 | analog->mq = SR_MQ_CURRENT; |
268 | analog->unit = SR_UNIT_AMPERE; | |
269 | } | |
8c1adf37 | 270 | if (info->is_ohm) { |
6c701476 UH |
271 | analog->mq = SR_MQ_RESISTANCE; |
272 | analog->unit = SR_UNIT_OHM; | |
273 | } | |
8c1adf37 | 274 | if (info->is_hz) { |
6c701476 UH |
275 | analog->mq = SR_MQ_FREQUENCY; |
276 | analog->unit = SR_UNIT_HERTZ; | |
277 | } | |
8c1adf37 | 278 | if (info->is_farad) { |
6c701476 UH |
279 | analog->mq = SR_MQ_CAPACITANCE; |
280 | analog->unit = SR_UNIT_FARAD; | |
281 | } | |
8c1adf37 | 282 | if (info->is_beep) { |
6c701476 UH |
283 | analog->mq = SR_MQ_CONTINUITY; |
284 | analog->unit = SR_UNIT_BOOLEAN; | |
8c1adf37 | 285 | *floatval = (*floatval == INFINITY) ? 0.0 : 1.0; |
6c701476 | 286 | } |
8c1adf37 | 287 | if (info->is_diode) { |
6c701476 UH |
288 | analog->mq = SR_MQ_VOLTAGE; |
289 | analog->unit = SR_UNIT_VOLT; | |
290 | } | |
8c1adf37 | 291 | if (info->is_percent) { |
6c701476 UH |
292 | analog->mq = SR_MQ_DUTY_CYCLE; |
293 | analog->unit = SR_UNIT_PERCENTAGE; | |
294 | } | |
295 | ||
296 | /* Measurement related flags */ | |
8c1adf37 | 297 | if (info->is_ac) |
6c701476 | 298 | analog->mqflags |= SR_MQFLAG_AC; |
8c1adf37 | 299 | if (info->is_dc) |
6c701476 | 300 | analog->mqflags |= SR_MQFLAG_DC; |
8c1adf37 | 301 | if (info->is_auto) |
6c701476 | 302 | analog->mqflags |= SR_MQFLAG_AUTORANGE; |
a6ed50f4 UH |
303 | if (info->is_diode) |
304 | analog->mqflags |= SR_MQFLAG_DIODE; | |
8c1adf37 | 305 | if (info->is_hold) |
6c701476 | 306 | analog->mqflags |= SR_MQFLAG_HOLD; |
8c1adf37 | 307 | if (info->is_rel) |
6c701476 UH |
308 | analog->mqflags |= SR_MQFLAG_RELATIVE; |
309 | ||
310 | /* Other flags */ | |
8c1adf37 | 311 | if (info->is_rs232) |
6c701476 | 312 | sr_spew("RS232 enabled."); |
8c1adf37 | 313 | if (info->is_bat) |
6c701476 | 314 | sr_spew("Battery is low."); |
8c1adf37 | 315 | if (info->is_c2c1_00) |
6c701476 | 316 | sr_spew("User-defined LCD symbol 0 is active."); |
8c1adf37 | 317 | if (info->is_c2c1_01) |
6c701476 | 318 | sr_spew("User-defined LCD symbol 1 is active."); |
8c1adf37 | 319 | if (info->is_c2c1_10) |
6c701476 | 320 | sr_spew("User-defined LCD symbol 2 is active."); |
8c1adf37 | 321 | if (info->is_c2c1_11) |
6c701476 | 322 | sr_spew("User-defined LCD symbol 3 is active."); |
8c1adf37 | 323 | } |
6c701476 | 324 | |
8c1adf37 UH |
325 | SR_PRIV gboolean sr_fs9721_packet_valid(const uint8_t *buf) |
326 | { | |
327 | struct fs9721_info info; | |
328 | ||
329 | parse_flags(buf, &info); | |
330 | ||
331 | return (sync_nibbles_valid(buf) && flags_valid(&info)); | |
6c701476 UH |
332 | } |
333 | ||
334 | /** | |
335 | * Parse a protocol packet. | |
336 | * | |
93357bc3 | 337 | * @param buf Buffer containing the 14-byte protocol packet. Must not be NULL. |
8c1adf37 | 338 | * @param floatval Pointer to a float variable. That variable will contain the |
f3f19d11 | 339 | * result value upon parsing success. Must not be NULL. |
5faebab2 | 340 | * @param analog Pointer to a struct sr_datafeed_analog_old. The struct will be |
6c701476 | 341 | * filled with data according to the protocol packet. |
93357bc3 | 342 | * Must not be NULL. |
8c1adf37 | 343 | * @param info Pointer to a struct fs9721_info. The struct will be filled |
93357bc3 | 344 | * with data according to the protocol packet. Must not be NULL. |
6c701476 UH |
345 | * |
346 | * @return SR_OK upon success, SR_ERR upon failure. Upon errors, the | |
347 | * 'analog' variable contents are undefined and should not be used. | |
348 | */ | |
8c1adf37 | 349 | SR_PRIV int sr_fs9721_parse(const uint8_t *buf, float *floatval, |
5faebab2 | 350 | struct sr_datafeed_analog_old *analog, void *info) |
6c701476 UH |
351 | { |
352 | int ret; | |
93357bc3 UH |
353 | struct fs9721_info *info_local; |
354 | ||
355 | info_local = (struct fs9721_info *)info; | |
6c701476 UH |
356 | |
357 | if ((ret = parse_value(buf, floatval)) != SR_OK) { | |
ec5186f9 | 358 | sr_dbg("Error parsing value: %d.", ret); |
6c701476 UH |
359 | return ret; |
360 | } | |
361 | ||
93357bc3 UH |
362 | parse_flags(buf, info_local); |
363 | handle_flags(analog, floatval, info_local); | |
6c701476 UH |
364 | |
365 | return SR_OK; | |
366 | } | |
48535594 | 367 | |
5faebab2 | 368 | SR_PRIV void sr_fs9721_00_temp_c(struct sr_datafeed_analog_old *analog, void *info) |
48535594 UH |
369 | { |
370 | struct fs9721_info *info_local; | |
371 | ||
372 | info_local = (struct fs9721_info *)info; | |
373 | ||
374 | /* User-defined FS9721_LP3 flag 'c2c1_00' means temperature (C). */ | |
375 | if (info_local->is_c2c1_00) { | |
376 | analog->mq = SR_MQ_TEMPERATURE; | |
377 | analog->unit = SR_UNIT_CELSIUS; | |
378 | } | |
379 | } | |
2451a20f | 380 | |
5faebab2 | 381 | SR_PRIV void sr_fs9721_01_temp_c(struct sr_datafeed_analog_old *analog, void *info) |
2451a20f UH |
382 | { |
383 | struct fs9721_info *info_local; | |
384 | ||
385 | info_local = (struct fs9721_info *)info; | |
386 | ||
387 | /* User-defined FS9721_LP3 flag 'c2c1_01' means temperature (C). */ | |
388 | if (info_local->is_c2c1_01) { | |
389 | analog->mq = SR_MQ_TEMPERATURE; | |
390 | analog->unit = SR_UNIT_CELSIUS; | |
391 | } | |
392 | } | |
393 | ||
5faebab2 | 394 | SR_PRIV void sr_fs9721_10_temp_c(struct sr_datafeed_analog_old *analog, void *info) |
2451a20f UH |
395 | { |
396 | struct fs9721_info *info_local; | |
397 | ||
398 | info_local = (struct fs9721_info *)info; | |
399 | ||
400 | /* User-defined FS9721_LP3 flag 'c2c1_10' means temperature (C). */ | |
401 | if (info_local->is_c2c1_10) { | |
402 | analog->mq = SR_MQ_TEMPERATURE; | |
403 | analog->unit = SR_UNIT_CELSIUS; | |
404 | } | |
405 | } | |
406 | ||
5faebab2 | 407 | SR_PRIV void sr_fs9721_01_10_temp_f_c(struct sr_datafeed_analog_old *analog, void *info) |
2451a20f UH |
408 | { |
409 | struct fs9721_info *info_local; | |
410 | ||
411 | info_local = (struct fs9721_info *)info; | |
412 | ||
413 | /* User-defined FS9721_LP3 flag 'c2c1_01' means temperature (F). */ | |
414 | if (info_local->is_c2c1_01) { | |
415 | analog->mq = SR_MQ_TEMPERATURE; | |
416 | analog->unit = SR_UNIT_FAHRENHEIT; | |
417 | } | |
418 | ||
419 | /* User-defined FS9721_LP3 flag 'c2c1_10' means temperature (C). */ | |
420 | if (info_local->is_c2c1_10) { | |
421 | analog->mq = SR_MQ_TEMPERATURE; | |
422 | analog->unit = SR_UNIT_CELSIUS; | |
423 | } | |
424 | } | |
d327972b | 425 | |
5faebab2 | 426 | SR_PRIV void sr_fs9721_max_c_min(struct sr_datafeed_analog_old *analog, void *info) |
d327972b UH |
427 | { |
428 | struct fs9721_info *info_local; | |
429 | ||
430 | info_local = (struct fs9721_info *)info; | |
431 | ||
432 | /* User-defined FS9721_LP3 flag 'c2c1_00' means MAX. */ | |
433 | if (info_local->is_c2c1_00) | |
434 | analog->mqflags |= SR_MQFLAG_MAX; | |
435 | ||
436 | /* User-defined FS9721_LP3 flag 'c2c1_01' means temperature (C). */ | |
437 | if (info_local->is_c2c1_01) { | |
438 | analog->mq = SR_MQ_TEMPERATURE; | |
439 | analog->unit = SR_UNIT_CELSIUS; | |
440 | } | |
441 | ||
442 | /* User-defined FS9721_LP3 flag 'c2c1_11' means MIN. */ | |
443 | if (info_local->is_c2c1_11) | |
444 | analog->mqflags |= SR_MQFLAG_MIN; | |
445 | ||
446 | } |