]>
Commit | Line | Data |
---|---|---|
6ea75aa1 GS |
1 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
2 | * irmpconfig.h | |
3 | * | |
4 | * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H! | |
5 | * | |
6 | * Copyright (c) 2009-2019 Frank Meyer - frank(at)fli4l.de | |
7 | * Extensions for PIC 12F1820 W.Strobl 2014-07-20 | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
12 | * (at your option) any later version. | |
13 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
14 | */ | |
15 | ||
16 | #ifndef _IRMP_H_ | |
17 | # error please include only irmp.h, not irmpconfig.h | |
18 | #endif | |
19 | ||
20 | #ifdef IRMPCONFIG_STAGE1_H | |
21 | ||
22 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
23 | * Change IRMP_32_BIT here | |
24 | * | |
25 | * Normally, IRMP_32_BIT ist 0. Then we use irmp.command as a 16 bit value. | |
26 | * If you set IRMP_32_BIT to 1, we will use irmp.command as a 32 bit value. | |
27 | * A 32 bit command costs more CPU resources on 8 bit processors (e.g. AVR), | |
28 | * but there are IR protocols which need more than 16 bits for a reasonable | |
29 | * command value. | |
30 | * | |
31 | * If you want to use one of the following protocols, set IRMP_32_BIT to 1, | |
32 | * otherwise set it to 0: | |
33 | * - MERLIN | |
34 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
35 | */ | |
36 | ||
79ef3760 | 37 | #define IRMP_32_BIT 1 // use 32 bit command value, 0 or 1 |
6ea75aa1 GS |
38 | |
39 | #endif // IRMPCONFIG_STAGE1_H | |
40 | #ifdef IRMPCONFIG_STAGE2_H | |
41 | ||
42 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
43 | * Change F_INTERRUPTS if you change the number of interrupts per second, | |
44 | * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 | |
45 | * A value above 15000 costs additional program space, absolute maximum value is 20000. | |
46 | * On PIC with XC8/C18 Compiler, use 15151 as the correct value. | |
47 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
48 | */ | |
49 | #ifndef F_INTERRUPTS | |
79ef3760 | 50 | # define F_INTERRUPTS 20000 // interrupts per second, min: 10000, max: 20000, typ: 15000 |
6ea75aa1 GS |
51 | #endif |
52 | ||
53 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
54 | * Change settings from 1 to 0 if you want to disable one or more decoders. | |
55 | * This saves program space. | |
56 | * | |
57 | * 1 enable decoder | |
58 | * 0 disable decoder | |
59 | * | |
60 | * The standard decoders are enabled per default. | |
61 | * Less common protocols are disabled here, you need to enable them manually. | |
62 | * | |
63 | * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. | |
64 | * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. | |
65 | * You cannot enable both DENON and RUWIDO, only enable one of them. | |
66 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
67 | */ | |
68 | ||
69 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space | |
70 | #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes | |
71 | #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE + ONKYO >= 10000 ~300 bytes | |
72 | #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes | |
73 | #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes | |
74 | ||
75 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space | |
79ef3760 GS |
76 | #define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~150 bytes |
77 | #define IRMP_SUPPORT_NEC16_PROTOCOL 1 // NEC16 >= 10000 ~100 bytes | |
78 | #define IRMP_SUPPORT_NEC42_PROTOCOL 1 // NEC42 >= 10000 ~300 bytes | |
79 | #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes | |
80 | #define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes | |
81 | #define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes | |
82 | #define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~250 bytes | |
83 | #define IRMP_SUPPORT_IR60_PROTOCOL 1 // IR60 (SDA2008) >= 10000 ~300 bytes | |
84 | #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~300 bytes | |
85 | #define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // Siemens Gigaset >= 15000 ~550 bytes | |
86 | #define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~300 bytes | |
6ea75aa1 GS |
87 | |
88 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space | |
79ef3760 GS |
89 | #define IRMP_SUPPORT_BOSE_PROTOCOL 1 // BOSE >= 10000 ~150 bytes |
90 | #define IRMP_SUPPORT_KATHREIN_PROTOCOL 1 // Kathrein >= 10000 ~200 bytes | |
91 | #define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // NUBERT >= 10000 ~50 bytes | |
6ea75aa1 | 92 | #define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes |
79ef3760 GS |
93 | #define IRMP_SUPPORT_SPEAKER_PROTOCOL 1 // SPEAKER (~NUBERT) >= 10000 ~50 bytes |
94 | #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang & Olufsen >= 10000 ~200 bytes | |
95 | #define IRMP_SUPPORT_RECS80_PROTOCOL 1 // RECS80 (SAA3004) >= 15000 ~50 bytes | |
96 | #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // RECS80EXT (SAA3008) >= 15000 ~50 bytes | |
97 | #define IRMP_SUPPORT_THOMSON_PROTOCOL 1 // Thomson >= 10000 ~250 bytes | |
98 | #define IRMP_SUPPORT_NIKON_PROTOCOL 1 // NIKON camera >= 10000 ~250 bytes | |
99 | #define IRMP_SUPPORT_NETBOX_PROTOCOL 1 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!) | |
6ea75aa1 | 100 | #define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes |
79ef3760 GS |
101 | #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 1 // Telefunken 1560 >= 10000 ~150 bytes |
102 | #define IRMP_SUPPORT_FDC_PROTOCOL 1 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) | |
103 | #define IRMP_SUPPORT_RCCAR_PROTOCOL 1 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) | |
6ea75aa1 GS |
104 | #define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes |
105 | #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes | |
79ef3760 GS |
106 | #define IRMP_SUPPORT_A1TVBOX_PROTOCOL 1 // A1 TV BOX >= 15000 (better 20000) ~300 bytes |
107 | #define IRMP_SUPPORT_LEGO_PROTOCOL 1 // LEGO Power RC >= 20000 ~150 bytes | |
108 | #define IRMP_SUPPORT_RCMM_PROTOCOL 1 // RCMM 12,24, or 32 >= 20000 ~150 bytes | |
109 | #define IRMP_SUPPORT_LGAIR_PROTOCOL 1 // LG Air Condition >= 10000 ~300 bytes | |
110 | #define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 1 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!) | |
6ea75aa1 GS |
111 | #define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes |
112 | #define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes | |
113 | #define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes | |
114 | #define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes | |
79ef3760 | 115 | #define IRMP_SUPPORT_TECHNICS_PROTOCOL 1 // TECHNICS >= 10000 ~250 bytes |
6ea75aa1 | 116 | #define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes |
79ef3760 GS |
117 | #define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 1 // Mitsubishi Aircond >= 10000 ~250 bytes |
118 | #define IRMP_SUPPORT_VINCENT_PROTOCOL 1 // VINCENT >= 10000 ~250 bytes | |
119 | #define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 1 // SAMSUNG AH >= 10000 ~250 bytes | |
120 | #define IRMP_SUPPORT_IRMP16_PROTOCOL 1 // IRMP specific >= 15000 ~250 bytes | |
6ea75aa1 GS |
121 | #define IRMP_SUPPORT_GREE_PROTOCOL 0 // GREE CLIMATE >= 10000 ~250 bytes |
122 | #define IRMP_SUPPORT_RCII_PROTOCOL 0 // RCII T+A >= 15000 ~250 bytes | |
79ef3760 | 123 | #define IRMP_SUPPORT_METZ_PROTOCOL 1 // METZ >= 15000 ~250 bytes |
6ea75aa1 GS |
124 | |
125 | #define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental) | |
126 | ||
127 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
128 | * Change hardware pin here for ATMEL ATMega/ATTiny/XMega | |
129 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
130 | */ | |
131 | #if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR | |
132 | # define IRMP_PORT_LETTER B | |
133 | # define IRMP_BIT_NUMBER 6 | |
134 | ||
135 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
136 | * Change hardware pin here for PIC C18 or XC8 compiler | |
137 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
138 | */ | |
139 | #elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler) | |
140 | # if defined(__12F1840) | |
141 | # define IRMP_PIN RA5 // on 12F1840 with XC8 compiler | |
142 | # else | |
143 | # define IRMP_PIN PORTBbits.RB4 // PIC C18 | |
144 | # endif | |
145 | ||
146 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
147 | * Change hardware pin here for PIC CCS compiler | |
148 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
149 | */ | |
150 | #elif defined (PIC_CCS) | |
151 | # define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler) | |
152 | ||
153 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
154 | * Change hardware pin here for ARM STM32 | |
155 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
156 | */ | |
157 | #elif defined (ARM_STM32) // use C13 as IR input on STM32 | |
158 | # define IRMP_PORT_LETTER C | |
159 | # define IRMP_BIT_NUMBER 13 | |
160 | ||
161 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
162 | * Hardware pin for ARM STM32 (HAL) - don't change here, define IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN in STM32Cube (Main.h) | |
163 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
164 | */ | |
165 | #elif defined (ARM_STM32_HAL) // STM32: IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN must be defined in STM32Cube | |
166 | # define IRMP_PORT_LETTER IRMP_Receive_GPIO_Port | |
167 | # define IRMP_BIT_NUMBER IRMP_Receive_Pin | |
168 | ||
169 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
170 | * Change hardware pin here for Stellaris ARM Cortex M4 | |
171 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
172 | */ | |
173 | #elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F | |
174 | # define IRMP_PORT_LETTER B | |
175 | # define IRMP_BIT_NUMBER 4 | |
176 | ||
177 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
178 | * Change hardware pin here for STM8 | |
179 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
180 | */ | |
181 | #elif defined (SDCC_STM8) // use PA1 as IR input on STM8 | |
182 | # define IRMP_PORT_LETTER A | |
183 | # define IRMP_BIT_NUMBER 1 | |
184 | ||
185 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
186 | * Change hardware pin here for ESP8266 | |
187 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
188 | */ | |
189 | #elif defined (__xtensa__) | |
190 | # define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board | |
191 | ||
192 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
193 | * Change hardware pin here for Teensy 3.x with teensyduino gcc compiler | |
194 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
195 | */ | |
196 | #elif defined (TEENSY_ARM_CORTEX_M4) | |
197 | # define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy | |
198 | ||
199 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
200 | * Change hardware pin here for MBED | |
201 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
202 | */ | |
203 | #elif defined(__MBED__) | |
204 | # define IRMP_PIN P0_22 // use P1_27 on LPC1347 | |
205 | # define IRMP_PINMODE PullUp // hardware dependent | |
206 | ||
207 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
208 | * Change hardware pin here for ChibiOS HAL | |
209 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
210 | */ | |
211 | #elif defined(_CHIBIOS_HAL_) | |
212 | # define IRMP_PIN LINE_IR_IN // use pin names as defined in the board config file, prefixed with "LINE_" | |
213 | # define IRMP_LOGGING_SD SD1 // the ChibiOS HAL Serial Driver instance to log to | |
214 | // (when IRMP_LOGGING is enabled below). | |
215 | // Make sure SERIAL_BUFFERS_SIZE is large enough when enabling logging | |
216 | ||
217 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
218 | * Handling of unknown target system: DON'T CHANGE | |
219 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
220 | */ | |
221 | #elif !defined (UNIX_OR_WINDOWS) | |
222 | # error target system not defined. | |
223 | #endif | |
224 | ||
225 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
226 | * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd | |
227 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
228 | */ | |
229 | #ifndef IRMP_LOGGING | |
230 | # define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0 | |
231 | #endif | |
232 | ||
233 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
234 | * Use external logging routines | |
235 | * If you enable external logging, you have also to enable IRMP_LOGGING above | |
236 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
237 | */ | |
238 | #ifndef IRMP_EXT_LOGGING | |
239 | # define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0 | |
240 | #endif | |
241 | ||
242 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
243 | * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM! | |
244 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
245 | */ | |
246 | #ifndef IRMP_PROTOCOL_NAMES | |
247 | # define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0 | |
248 | #endif | |
249 | ||
250 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
251 | * Use Callbacks to indicate input signal | |
252 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
253 | */ | |
254 | #ifndef IRMP_USE_CALLBACK | |
255 | # define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0 | |
256 | #endif | |
257 | ||
258 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
259 | * Call the user-provided irmp_idle() function when IRMP is idle. | |
260 | * Can be used to disable the timer irq and enter a sleep mode to save power | |
261 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
262 | */ | |
263 | #ifndef IRMP_USE_IDLE_CALL | |
264 | # define IRMP_USE_IDLE_CALL 0 // 1: use idle calls. 0: do not. default is 0 | |
265 | #endif | |
266 | ||
267 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- | |
268 | * Use ChibiOS Events to signal that valid IR data was received | |
269 | *--------------------------------------------------------------------------------------------------------------------------------------------------- | |
270 | */ | |
271 | #if defined(_CHIBIOS_RT_) || defined(_CHIBIOS_NIL_) | |
272 | ||
273 | # ifndef IRMP_USE_EVENT | |
274 | # define IRMP_USE_EVENT 0 // 1: use event. 0: do not. default is 0 | |
275 | # endif | |
276 | ||
277 | # if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_BIT) | |
278 | # define IRMP_EVENT_BIT 1 // event flag or bit to send | |
279 | # endif | |
280 | # if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_THREAD_PTR) | |
281 | # define IRMP_EVENT_THREAD_PTR ir_receive_thread_p // pointer to the thread to send the event to | |
282 | extern thread_t *IRMP_EVENT_THREAD_PTR; // the pointer must be defined and initialized elsewhere | |
283 | # endif | |
284 | ||
285 | #endif // _CHIBIOS_RT_ || _CHIBIOS_NIL_ | |
286 | ||
287 | #endif // _IRMPCONFIG_STAGE2_H_ |