]>
Commit | Line | Data |
---|---|---|
c463dcf0 MC |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se> | |
fec7aa6a MC |
5 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> |
6 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
c463dcf0 MC |
7 | * |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
f6a21fa5 MC |
22 | #include <glib.h> |
23 | #include <libusb.h> | |
24 | #include <stdlib.h> | |
25 | #include <string.h> | |
db11d7d2 | 26 | #include <math.h> |
f6a21fa5 MC |
27 | #include "libsigrok.h" |
28 | #include "libsigrok-internal.h" | |
c463dcf0 MC |
29 | #include "protocol.h" |
30 | ||
96484e22 UH |
31 | #define LOGIC16_VID 0x21a9 |
32 | #define LOGIC16_PID 0x1001 | |
33 | #define NUM_PROBES 16 | |
f6a21fa5 | 34 | |
5eea4305 MC |
35 | #define USB_INTERFACE 0 |
36 | #define USB_CONFIGURATION 1 | |
37 | #define FX2_FIRMWARE FIRMWARE_DIR "/saleae-logic16-fx2.fw" | |
38 | ||
39 | #define MAX_RENUM_DELAY_MS 3000 | |
7b5daad4 | 40 | #define NUM_SIMUL_TRANSFERS 32 |
5eea4305 | 41 | |
c463dcf0 MC |
42 | SR_PRIV struct sr_dev_driver saleae_logic16_driver_info; |
43 | static struct sr_dev_driver *di = &saleae_logic16_driver_info; | |
44 | ||
b117363a MC |
45 | static const int32_t hwopts[] = { |
46 | SR_CONF_CONN, | |
47 | }; | |
48 | ||
49 | static const int32_t hwcaps[] = { | |
50 | SR_CONF_LOGIC_ANALYZER, | |
51 | SR_CONF_SAMPLERATE, | |
db11d7d2 | 52 | SR_CONF_VOLTAGE_THRESHOLD, |
b117363a MC |
53 | |
54 | /* These are really implemented in the driver, not the hardware. */ | |
55 | SR_CONF_LIMIT_SAMPLES, | |
56 | SR_CONF_CONTINUOUS, | |
57 | }; | |
58 | ||
f6a21fa5 MC |
59 | static const char *probe_names[NUM_PROBES + 1] = { |
60 | "0", "1", "2", "3", "4", "5", "6", "7", "8", | |
61 | "9", "10", "11", "12", "13", "14", "15", | |
62 | NULL, | |
63 | }; | |
c463dcf0 | 64 | |
db11d7d2 MC |
65 | static const struct { |
66 | enum voltage_range range; | |
67 | gdouble low; | |
68 | gdouble high; | |
69 | } volt_thresholds[] = { | |
70 | { VOLTAGE_RANGE_18_33_V, 0.7, 1.4 }, | |
71 | { VOLTAGE_RANGE_5_V, 1.4, 3.6 }, | |
72 | }; | |
73 | ||
7b5daad4 MC |
74 | static const uint64_t samplerates[] = { |
75 | SR_KHZ(500), | |
76 | SR_MHZ(1), | |
77 | SR_MHZ(2), | |
78 | SR_MHZ(4), | |
79 | SR_MHZ(5), | |
80 | SR_MHZ(8), | |
81 | SR_MHZ(10), | |
82 | SR_KHZ(12500), | |
83 | SR_MHZ(16), | |
84 | SR_MHZ(25), | |
85 | SR_MHZ(32), | |
86 | SR_MHZ(40), | |
87 | SR_MHZ(80), | |
88 | SR_MHZ(100), | |
89 | }; | |
90 | ||
c463dcf0 MC |
91 | static int init(struct sr_context *sr_ctx) |
92 | { | |
93 | return std_init(sr_ctx, di, LOG_PREFIX); | |
94 | } | |
95 | ||
5eea4305 MC |
96 | static gboolean check_conf_profile(libusb_device *dev) |
97 | { | |
98 | struct libusb_device_descriptor des; | |
99 | struct libusb_device_handle *hdl; | |
100 | gboolean ret; | |
101 | unsigned char strdesc[64]; | |
102 | ||
103 | hdl = NULL; | |
104 | ret = FALSE; | |
105 | while (!ret) { | |
106 | /* Assume the FW has not been loaded, unless proven wrong. */ | |
107 | if (libusb_get_device_descriptor(dev, &des) != 0) | |
108 | break; | |
109 | ||
110 | if (libusb_open(dev, &hdl) != 0) | |
111 | break; | |
112 | ||
113 | if (libusb_get_string_descriptor_ascii(hdl, | |
114 | des.iManufacturer, strdesc, sizeof(strdesc)) < 0) | |
115 | break; | |
116 | if (strcmp((const char *)strdesc, "Saleae LLC")) | |
117 | break; | |
118 | ||
119 | if (libusb_get_string_descriptor_ascii(hdl, | |
96484e22 | 120 | des.iProduct, strdesc, sizeof(strdesc)) < 0) |
5eea4305 MC |
121 | break; |
122 | if (strcmp((const char *)strdesc, "Logic S/16")) | |
123 | break; | |
124 | ||
125 | /* If we made it here, it must be a configured Logic16. */ | |
126 | ret = TRUE; | |
127 | } | |
128 | if (hdl) | |
129 | libusb_close(hdl); | |
130 | ||
131 | return ret; | |
132 | } | |
133 | ||
c463dcf0 MC |
134 | static GSList *scan(GSList *options) |
135 | { | |
136 | struct drv_context *drvc; | |
f6a21fa5 MC |
137 | struct dev_context *devc; |
138 | struct sr_dev_inst *sdi; | |
5eea4305 | 139 | struct sr_usb_dev_inst *usb; |
f6a21fa5 | 140 | struct sr_probe *probe; |
5eea4305 MC |
141 | struct sr_config *src; |
142 | GSList *l, *devices, *conn_devices; | |
f6a21fa5 MC |
143 | struct libusb_device_descriptor des; |
144 | libusb_device **devlist; | |
5eea4305 MC |
145 | int devcnt, ret, i, j; |
146 | const char *conn; | |
c463dcf0 | 147 | |
c463dcf0 | 148 | drvc = di->priv; |
c463dcf0 | 149 | |
5eea4305 MC |
150 | conn = NULL; |
151 | for (l = options; l; l = l->next) { | |
152 | src = l->data; | |
153 | switch (src->key) { | |
154 | case SR_CONF_CONN: | |
155 | conn = g_variant_get_string(src->data, NULL); | |
156 | break; | |
157 | } | |
158 | } | |
159 | if (conn) | |
160 | conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn); | |
161 | else | |
162 | conn_devices = NULL; | |
163 | ||
164 | /* Find all Logic16 devices and upload firmware to them. */ | |
f6a21fa5 MC |
165 | devices = NULL; |
166 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
167 | for (i = 0; devlist[i]; i++) { | |
5eea4305 MC |
168 | if (conn) { |
169 | usb = NULL; | |
170 | for (l = conn_devices; l; l = l->next) { | |
171 | usb = l->data; | |
172 | if (usb->bus == libusb_get_bus_number(devlist[i]) | |
173 | && usb->address == libusb_get_device_address(devlist[i])) | |
174 | break; | |
175 | } | |
176 | if (!l) | |
177 | /* This device matched none of the ones that | |
178 | * matched the conn specification. */ | |
179 | continue; | |
180 | } | |
181 | ||
96484e22 | 182 | if ((ret = libusb_get_device_descriptor(devlist[i], &des)) != 0) { |
5eea4305 MC |
183 | sr_warn("Failed to get device descriptor: %s.", |
184 | libusb_error_name(ret)); | |
f6a21fa5 MC |
185 | continue; |
186 | } | |
187 | ||
188 | if (des.idVendor != LOGIC16_VID || des.idProduct != LOGIC16_PID) | |
189 | continue; | |
190 | ||
191 | devcnt = g_slist_length(drvc->instances); | |
5eea4305 MC |
192 | sdi = sr_dev_inst_new(devcnt, SR_ST_INITIALIZING, |
193 | "Saleae", "Logic16", NULL); | |
194 | if (!sdi) | |
f6a21fa5 MC |
195 | return NULL; |
196 | sdi->driver = di; | |
197 | ||
f6a21fa5 MC |
198 | for (j = 0; probe_names[j]; j++) { |
199 | if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE, | |
200 | probe_names[j]))) | |
201 | return NULL; | |
202 | sdi->probes = g_slist_append(sdi->probes, probe); | |
203 | } | |
204 | ||
5eea4305 | 205 | if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) |
f6a21fa5 | 206 | return NULL; |
db11d7d2 | 207 | devc->selected_voltage_range = VOLTAGE_RANGE_18_33_V; |
5eea4305 | 208 | sdi->priv = devc; |
f6a21fa5 MC |
209 | drvc->instances = g_slist_append(drvc->instances, sdi); |
210 | devices = g_slist_append(devices, sdi); | |
5eea4305 MC |
211 | |
212 | if (check_conf_profile(devlist[i])) { | |
213 | /* Already has the firmware, so fix the new address. */ | |
214 | sr_dbg("Found a Logic16 device."); | |
215 | sdi->status = SR_ST_INACTIVE; | |
216 | sdi->inst_type = SR_INST_USB; | |
96484e22 UH |
217 | sdi->conn = sr_usb_dev_inst_new( |
218 | libusb_get_bus_number(devlist[i]), | |
219 | libusb_get_device_address(devlist[i]), NULL); | |
5eea4305 MC |
220 | } else { |
221 | if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION, | |
222 | FX2_FIRMWARE) == SR_OK) | |
223 | /* Store when this device's FW was updated. */ | |
224 | devc->fw_updated = g_get_monotonic_time(); | |
225 | else | |
226 | sr_err("Firmware upload failed for " | |
227 | "device %d.", devcnt); | |
228 | sdi->inst_type = SR_INST_USB; | |
96484e22 UH |
229 | sdi->conn = sr_usb_dev_inst_new( |
230 | libusb_get_bus_number(devlist[i]), 0xff, NULL); | |
5eea4305 | 231 | } |
f6a21fa5 MC |
232 | } |
233 | libusb_free_device_list(devlist, 1); | |
5eea4305 | 234 | g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free); |
c463dcf0 MC |
235 | |
236 | return devices; | |
237 | } | |
238 | ||
239 | static GSList *dev_list(void) | |
240 | { | |
87b537ce | 241 | return ((struct drv_context *)(di->priv))->instances; |
c463dcf0 MC |
242 | } |
243 | ||
244 | static int dev_clear(void) | |
245 | { | |
246 | return std_dev_clear(di, NULL); | |
247 | } | |
248 | ||
5eea4305 MC |
249 | static int logic16_dev_open(struct sr_dev_inst *sdi) |
250 | { | |
251 | libusb_device **devlist; | |
252 | struct sr_usb_dev_inst *usb; | |
253 | struct libusb_device_descriptor des; | |
5eea4305 MC |
254 | struct drv_context *drvc; |
255 | int ret, skip, i, device_count; | |
256 | ||
257 | drvc = di->priv; | |
5eea4305 MC |
258 | usb = sdi->conn; |
259 | ||
260 | if (sdi->status == SR_ST_ACTIVE) | |
261 | /* Device is already in use. */ | |
262 | return SR_ERR; | |
263 | ||
264 | skip = 0; | |
265 | device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
266 | if (device_count < 0) { | |
267 | sr_err("Failed to get device list: %s.", | |
268 | libusb_error_name(device_count)); | |
269 | return SR_ERR; | |
270 | } | |
271 | ||
272 | for (i = 0; i < device_count; i++) { | |
273 | if ((ret = libusb_get_device_descriptor(devlist[i], &des))) { | |
274 | sr_err("Failed to get device descriptor: %s.", | |
275 | libusb_error_name(ret)); | |
276 | continue; | |
277 | } | |
278 | ||
96484e22 | 279 | if (des.idVendor != LOGIC16_VID || des.idProduct != LOGIC16_PID) |
5eea4305 MC |
280 | continue; |
281 | ||
282 | if (sdi->status == SR_ST_INITIALIZING) { | |
283 | if (skip != sdi->index) { | |
284 | /* Skip devices of this type that aren't the one we want. */ | |
285 | skip += 1; | |
286 | continue; | |
287 | } | |
288 | } else if (sdi->status == SR_ST_INACTIVE) { | |
289 | /* | |
290 | * This device is fully enumerated, so we need to find | |
291 | * this device by vendor, product, bus and address. | |
292 | */ | |
293 | if (libusb_get_bus_number(devlist[i]) != usb->bus | |
96484e22 | 294 | || libusb_get_device_address(devlist[i]) != usb->address) |
5eea4305 MC |
295 | /* This is not the one. */ |
296 | continue; | |
297 | } | |
298 | ||
299 | if (!(ret = libusb_open(devlist[i], &usb->devhdl))) { | |
300 | if (usb->address == 0xff) | |
301 | /* | |
302 | * First time we touch this device after FW | |
303 | * upload, so we don't know the address yet. | |
304 | */ | |
305 | usb->address = libusb_get_device_address(devlist[i]); | |
306 | } else { | |
307 | sr_err("Failed to open device: %s.", | |
308 | libusb_error_name(ret)); | |
309 | break; | |
310 | } | |
311 | ||
96484e22 | 312 | if ((ret = logic16_init_device(sdi)) != SR_OK) { |
15abcf0f MC |
313 | sr_err("Failed to init device."); |
314 | break; | |
315 | } | |
316 | ||
5eea4305 | 317 | sdi->status = SR_ST_ACTIVE; |
96484e22 UH |
318 | sr_info("Opened device %d on %d.%d, interface %d.", |
319 | sdi->index, usb->bus, usb->address, USB_INTERFACE); | |
5eea4305 MC |
320 | |
321 | break; | |
322 | } | |
323 | libusb_free_device_list(devlist, 1); | |
324 | ||
325 | if (sdi->status != SR_ST_ACTIVE) | |
326 | return SR_ERR; | |
327 | ||
328 | return SR_OK; | |
329 | } | |
330 | ||
c463dcf0 MC |
331 | static int dev_open(struct sr_dev_inst *sdi) |
332 | { | |
5eea4305 MC |
333 | struct sr_usb_dev_inst *usb; |
334 | struct dev_context *devc; | |
335 | int ret; | |
336 | int64_t timediff_us, timediff_ms; | |
337 | ||
338 | devc = sdi->priv; | |
339 | usb = sdi->conn; | |
340 | ||
341 | /* | |
342 | * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS | |
343 | * milliseconds for the FX2 to renumerate. | |
344 | */ | |
345 | ret = SR_ERR; | |
346 | if (devc->fw_updated > 0) { | |
347 | sr_info("Waiting for device to reset."); | |
348 | /* Takes >= 300ms for the FX2 to be gone from the USB bus. */ | |
349 | g_usleep(300 * 1000); | |
350 | timediff_ms = 0; | |
351 | while (timediff_ms < MAX_RENUM_DELAY_MS) { | |
352 | if ((ret = logic16_dev_open(sdi)) == SR_OK) | |
353 | break; | |
354 | g_usleep(100 * 1000); | |
355 | ||
356 | timediff_us = g_get_monotonic_time() - devc->fw_updated; | |
357 | timediff_ms = timediff_us / 1000; | |
358 | sr_spew("Waited %" PRIi64 "ms.", timediff_ms); | |
359 | } | |
360 | if (ret != SR_OK) { | |
361 | sr_err("Device failed to renumerate."); | |
362 | return SR_ERR; | |
363 | } | |
364 | sr_info("Device came back after %" PRIi64 "ms.", timediff_ms); | |
365 | } else { | |
366 | sr_info("Firmware upload was not needed."); | |
367 | ret = logic16_dev_open(sdi); | |
368 | } | |
369 | ||
370 | if (ret != SR_OK) { | |
371 | sr_err("Unable to open device."); | |
372 | return SR_ERR; | |
373 | } | |
374 | ||
375 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
376 | if (ret != 0) { | |
96484e22 | 377 | switch (ret) { |
5eea4305 MC |
378 | case LIBUSB_ERROR_BUSY: |
379 | sr_err("Unable to claim USB interface. Another " | |
380 | "program or driver has already claimed it."); | |
381 | break; | |
382 | case LIBUSB_ERROR_NO_DEVICE: | |
383 | sr_err("Device has been disconnected."); | |
384 | break; | |
385 | default: | |
386 | sr_err("Unable to claim interface: %s.", | |
387 | libusb_error_name(ret)); | |
388 | break; | |
389 | } | |
c463dcf0 | 390 | |
5eea4305 MC |
391 | return SR_ERR; |
392 | } | |
c463dcf0 | 393 | |
5eea4305 MC |
394 | if (devc->cur_samplerate == 0) { |
395 | /* Samplerate hasn't been set; default to the slowest one. */ | |
7b5daad4 | 396 | devc->cur_samplerate = samplerates[0]; |
5eea4305 | 397 | } |
c463dcf0 MC |
398 | |
399 | return SR_OK; | |
400 | } | |
401 | ||
402 | static int dev_close(struct sr_dev_inst *sdi) | |
403 | { | |
5eea4305 | 404 | struct sr_usb_dev_inst *usb; |
c463dcf0 | 405 | |
5eea4305 MC |
406 | usb = sdi->conn; |
407 | if (usb->devhdl == NULL) | |
408 | return SR_ERR; | |
c463dcf0 | 409 | |
5eea4305 MC |
410 | sr_info("Closing device %d on %d.%d interface %d.", |
411 | sdi->index, usb->bus, usb->address, USB_INTERFACE); | |
412 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
413 | libusb_close(usb->devhdl); | |
414 | usb->devhdl = NULL; | |
c463dcf0 MC |
415 | sdi->status = SR_ST_INACTIVE; |
416 | ||
417 | return SR_OK; | |
418 | } | |
419 | ||
420 | static int cleanup(void) | |
421 | { | |
f6a21fa5 MC |
422 | int ret; |
423 | struct drv_context *drvc; | |
c463dcf0 | 424 | |
f6a21fa5 MC |
425 | if (!(drvc = di->priv)) |
426 | /* Can get called on an unused driver, doesn't matter. */ | |
427 | return SR_OK; | |
c463dcf0 | 428 | |
f6a21fa5 MC |
429 | ret = dev_clear(); |
430 | g_free(drvc); | |
431 | di->priv = NULL; | |
432 | ||
433 | return ret; | |
c463dcf0 MC |
434 | } |
435 | ||
436 | static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi) | |
437 | { | |
7b5daad4 | 438 | struct dev_context *devc; |
b117363a | 439 | struct sr_usb_dev_inst *usb; |
db11d7d2 | 440 | GVariant *range[2]; |
b117363a | 441 | char str[128]; |
c463dcf0 | 442 | int ret; |
96484e22 | 443 | unsigned int i; |
c463dcf0 | 444 | |
c463dcf0 MC |
445 | ret = SR_OK; |
446 | switch (key) { | |
b117363a MC |
447 | case SR_CONF_CONN: |
448 | if (!sdi || !sdi->conn) | |
449 | return SR_ERR_ARG; | |
450 | usb = sdi->conn; | |
451 | if (usb->address == 255) | |
452 | /* Device still needs to re-enumerate after firmware | |
453 | * upload, so we don't know its (future) address. */ | |
454 | return SR_ERR; | |
455 | snprintf(str, 128, "%d.%d", usb->bus, usb->address); | |
456 | *data = g_variant_new_string(str); | |
457 | break; | |
7b5daad4 MC |
458 | case SR_CONF_SAMPLERATE: |
459 | if (!sdi) | |
460 | return SR_ERR; | |
461 | devc = sdi->priv; | |
462 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
463 | break; | |
db11d7d2 MC |
464 | case SR_CONF_VOLTAGE_THRESHOLD: |
465 | if (!sdi) | |
466 | return SR_ERR; | |
467 | devc = sdi->priv; | |
468 | ret = SR_ERR; | |
96484e22 UH |
469 | for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) { |
470 | if (devc->selected_voltage_range != | |
471 | volt_thresholds[i].range) | |
472 | continue; | |
473 | range[0] = g_variant_new_double(volt_thresholds[i].low); | |
474 | range[1] = g_variant_new_double(volt_thresholds[i].high); | |
475 | *data = g_variant_new_tuple(range, 2); | |
476 | ret = SR_OK; | |
477 | break; | |
478 | } | |
db11d7d2 | 479 | break; |
c463dcf0 MC |
480 | default: |
481 | return SR_ERR_NA; | |
482 | } | |
483 | ||
484 | return ret; | |
485 | } | |
486 | ||
487 | static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi) | |
488 | { | |
7b5daad4 | 489 | struct dev_context *devc; |
db11d7d2 | 490 | gdouble low, high; |
c463dcf0 | 491 | int ret; |
96484e22 | 492 | unsigned int i; |
c463dcf0 | 493 | |
c463dcf0 MC |
494 | if (sdi->status != SR_ST_ACTIVE) |
495 | return SR_ERR_DEV_CLOSED; | |
496 | ||
7b5daad4 MC |
497 | devc = sdi->priv; |
498 | ||
c463dcf0 MC |
499 | ret = SR_OK; |
500 | switch (key) { | |
7b5daad4 MC |
501 | case SR_CONF_SAMPLERATE: |
502 | devc->cur_samplerate = g_variant_get_uint64(data); | |
503 | break; | |
504 | case SR_CONF_LIMIT_SAMPLES: | |
505 | devc->limit_samples = g_variant_get_uint64(data); | |
506 | break; | |
db11d7d2 MC |
507 | case SR_CONF_VOLTAGE_THRESHOLD: |
508 | g_variant_get(data, "(dd)", &low, &high); | |
509 | ret = SR_ERR_ARG; | |
510 | for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) { | |
511 | if (fabs(volt_thresholds[i].low - low) < 0.1 && | |
512 | fabs(volt_thresholds[i].high - high) < 0.1) { | |
513 | devc->selected_voltage_range = | |
514 | volt_thresholds[i].range; | |
515 | ret = SR_OK; | |
516 | break; | |
517 | } | |
518 | } | |
519 | break; | |
c463dcf0 MC |
520 | default: |
521 | ret = SR_ERR_NA; | |
522 | } | |
523 | ||
524 | return ret; | |
525 | } | |
526 | ||
527 | static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi) | |
528 | { | |
db11d7d2 | 529 | GVariant *gvar, *range[2]; |
7b5daad4 | 530 | GVariantBuilder gvb; |
c463dcf0 | 531 | int ret; |
96484e22 | 532 | unsigned int i; |
c463dcf0 MC |
533 | |
534 | (void)sdi; | |
c463dcf0 MC |
535 | |
536 | ret = SR_OK; | |
537 | switch (key) { | |
b117363a MC |
538 | case SR_CONF_SCAN_OPTIONS: |
539 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
540 | hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t)); | |
541 | break; | |
542 | case SR_CONF_DEVICE_OPTIONS: | |
543 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
544 | hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t)); | |
545 | break; | |
7b5daad4 MC |
546 | case SR_CONF_SAMPLERATE: |
547 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
96484e22 UH |
548 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), |
549 | samplerates, ARRAY_SIZE(samplerates), sizeof(uint64_t)); | |
7b5daad4 MC |
550 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); |
551 | *data = g_variant_builder_end(&gvb); | |
db11d7d2 MC |
552 | break; |
553 | case SR_CONF_VOLTAGE_THRESHOLD: | |
554 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
555 | for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) { | |
556 | range[0] = g_variant_new_double(volt_thresholds[i].low); | |
557 | range[1] = g_variant_new_double(volt_thresholds[i].high); | |
558 | gvar = g_variant_new_tuple(range, 2); | |
559 | g_variant_builder_add_value(&gvb, gvar); | |
560 | } | |
561 | *data = g_variant_builder_end(&gvb); | |
7b5daad4 | 562 | break; |
c463dcf0 MC |
563 | default: |
564 | return SR_ERR_NA; | |
565 | } | |
566 | ||
567 | return ret; | |
568 | } | |
569 | ||
7b5daad4 MC |
570 | static void abort_acquisition(struct dev_context *devc) |
571 | { | |
572 | int i; | |
573 | ||
574 | devc->num_samples = -1; | |
575 | ||
576 | for (i = devc->num_transfers - 1; i >= 0; i--) { | |
577 | if (devc->transfers[i]) | |
578 | libusb_cancel_transfer(devc->transfers[i]); | |
579 | } | |
580 | } | |
581 | ||
582 | static unsigned int bytes_per_ms(struct dev_context *devc) | |
583 | { | |
584 | return devc->cur_samplerate * devc->num_channels / 8000; | |
585 | } | |
586 | ||
587 | static size_t get_buffer_size(struct dev_context *devc) | |
588 | { | |
589 | size_t s; | |
590 | ||
591 | /* | |
592 | * The buffer should be large enough to hold 10ms of data and | |
593 | * a multiple of 512. | |
594 | */ | |
595 | s = 10 * bytes_per_ms(devc); | |
596 | return (s + 511) & ~511; | |
597 | } | |
598 | ||
599 | static unsigned int get_number_of_transfers(struct dev_context *devc) | |
600 | { | |
601 | unsigned int n; | |
602 | ||
603 | /* Total buffer size should be able to hold about 500ms of data. */ | |
604 | n = 500 * bytes_per_ms(devc) / get_buffer_size(devc); | |
605 | ||
606 | if (n > NUM_SIMUL_TRANSFERS) | |
607 | return NUM_SIMUL_TRANSFERS; | |
608 | ||
609 | return n; | |
610 | } | |
611 | ||
612 | static unsigned int get_timeout(struct dev_context *devc) | |
613 | { | |
614 | size_t total_size; | |
615 | unsigned int timeout; | |
616 | ||
617 | total_size = get_buffer_size(devc) * get_number_of_transfers(devc); | |
618 | timeout = total_size / bytes_per_ms(devc); | |
619 | return timeout + timeout / 4; /* Leave a headroom of 25% percent. */ | |
620 | } | |
621 | ||
622 | static int configure_probes(const struct sr_dev_inst *sdi) | |
623 | { | |
624 | struct dev_context *devc; | |
625 | struct sr_probe *probe; | |
626 | GSList *l; | |
627 | uint16_t probe_bit; | |
628 | ||
629 | devc = sdi->priv; | |
630 | ||
631 | devc->cur_channels = 0; | |
632 | devc->num_channels = 0; | |
633 | for (l = sdi->probes; l; l = l->next) { | |
634 | probe = (struct sr_probe *)l->data; | |
635 | if (probe->enabled == FALSE) | |
636 | continue; | |
637 | ||
638 | probe_bit = 1 << (probe->index); | |
639 | ||
640 | devc->cur_channels |= probe_bit; | |
641 | ||
642 | #ifdef WORDS_BIGENDIAN | |
96484e22 UH |
643 | /* |
644 | * Output logic data should be stored in little endian format. | |
645 | * To speed things up during conversion, do the switcharoo | |
646 | * here instead. | |
647 | */ | |
7b5daad4 MC |
648 | probe_bit = 1 << (probe->index ^ 8); |
649 | #endif | |
650 | ||
96484e22 | 651 | devc->channel_masks[devc->num_channels++] = probe_bit; |
7b5daad4 MC |
652 | } |
653 | ||
654 | return SR_OK; | |
655 | } | |
656 | ||
657 | static int receive_data(int fd, int revents, void *cb_data) | |
658 | { | |
659 | struct timeval tv; | |
660 | struct dev_context *devc; | |
661 | struct drv_context *drvc; | |
662 | const struct sr_dev_inst *sdi; | |
663 | ||
664 | (void)fd; | |
665 | (void)revents; | |
666 | ||
667 | sdi = cb_data; | |
668 | drvc = di->priv; | |
669 | devc = sdi->priv; | |
670 | ||
671 | tv.tv_sec = tv.tv_usec = 0; | |
672 | libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv); | |
673 | ||
674 | if (devc->num_samples == -2) { | |
96484e22 | 675 | logic16_abort_acquisition(sdi); |
7b5daad4 MC |
676 | abort_acquisition(devc); |
677 | } | |
678 | ||
679 | return TRUE; | |
680 | } | |
681 | ||
96484e22 | 682 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data) |
c463dcf0 | 683 | { |
7b5daad4 MC |
684 | struct dev_context *devc; |
685 | struct drv_context *drvc; | |
686 | struct sr_usb_dev_inst *usb; | |
687 | struct libusb_transfer *transfer; | |
688 | const struct libusb_pollfd **lupfd; | |
689 | unsigned int i, timeout, num_transfers; | |
690 | int ret; | |
691 | unsigned char *buf; | |
692 | size_t size, convsize; | |
c463dcf0 MC |
693 | |
694 | if (sdi->status != SR_ST_ACTIVE) | |
695 | return SR_ERR_DEV_CLOSED; | |
696 | ||
7b5daad4 MC |
697 | drvc = di->priv; |
698 | devc = sdi->priv; | |
699 | usb = sdi->conn; | |
700 | ||
96484e22 | 701 | /* Configures devc->cur_channels. */ |
7b5daad4 MC |
702 | if (configure_probes(sdi) != SR_OK) { |
703 | sr_err("Failed to configure probes."); | |
704 | return SR_ERR; | |
705 | } | |
706 | ||
707 | devc->cb_data = cb_data; | |
708 | devc->num_samples = 0; | |
709 | devc->empty_transfer_count = 0; | |
710 | devc->cur_channel = 0; | |
711 | memset(devc->channel_data, 0, sizeof(devc->channel_data)); | |
712 | ||
713 | timeout = get_timeout(devc); | |
714 | num_transfers = get_number_of_transfers(devc); | |
715 | size = get_buffer_size(devc); | |
716 | convsize = (size / devc->num_channels + 2) * 16; | |
717 | devc->submitted_transfers = 0; | |
718 | devc->usbfd = NULL; | |
719 | ||
720 | devc->convbuffer_size = convsize; | |
721 | if (!(devc->convbuffer = g_try_malloc(convsize))) { | |
722 | sr_err("Conversion buffer malloc failed."); | |
723 | return SR_ERR_MALLOC; | |
724 | } | |
725 | ||
726 | devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers); | |
727 | if (!devc->transfers) { | |
728 | sr_err("USB transfers malloc failed."); | |
729 | g_free(devc->convbuffer); | |
730 | return SR_ERR_MALLOC; | |
731 | } | |
732 | ||
96484e22 UH |
733 | if ((ret = logic16_setup_acquisition(sdi, devc->cur_samplerate, |
734 | devc->cur_channels)) != SR_OK) { | |
7b5daad4 MC |
735 | g_free(devc->transfers); |
736 | g_free(devc->convbuffer); | |
737 | return ret; | |
738 | } | |
739 | ||
740 | devc->num_transfers = num_transfers; | |
741 | for (i = 0; i < num_transfers; i++) { | |
742 | if (!(buf = g_try_malloc(size))) { | |
743 | sr_err("USB transfer buffer malloc failed."); | |
744 | if (devc->submitted_transfers) | |
745 | abort_acquisition(devc); | |
746 | else { | |
747 | g_free(devc->transfers); | |
748 | g_free(devc->convbuffer); | |
749 | } | |
750 | return SR_ERR_MALLOC; | |
751 | } | |
752 | transfer = libusb_alloc_transfer(0); | |
753 | libusb_fill_bulk_transfer(transfer, usb->devhdl, | |
754 | 2 | LIBUSB_ENDPOINT_IN, buf, size, | |
96484e22 | 755 | logic16_receive_transfer, devc, timeout); |
7b5daad4 MC |
756 | if ((ret = libusb_submit_transfer(transfer)) != 0) { |
757 | sr_err("Failed to submit transfer: %s.", | |
758 | libusb_error_name(ret)); | |
759 | libusb_free_transfer(transfer); | |
760 | g_free(buf); | |
761 | abort_acquisition(devc); | |
762 | return SR_ERR; | |
763 | } | |
764 | devc->transfers[i] = transfer; | |
765 | devc->submitted_transfers++; | |
766 | } | |
767 | ||
768 | lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx); | |
769 | for (i = 0; lupfd[i]; i++); | |
96484e22 UH |
770 | devc->usbfd = g_try_malloc(sizeof(struct libusb_pollfd) * (i + 1)); |
771 | if (!devc->usbfd) { | |
7b5daad4 MC |
772 | abort_acquisition(devc); |
773 | free(lupfd); | |
774 | return SR_ERR; | |
775 | } | |
776 | for (i = 0; lupfd[i]; i++) { | |
777 | sr_source_add(lupfd[i]->fd, lupfd[i]->events, | |
778 | timeout, receive_data, (void *)sdi); | |
779 | devc->usbfd[i] = lupfd[i]->fd; | |
780 | } | |
781 | devc->usbfd[i] = -1; | |
782 | free(lupfd); | |
783 | ||
784 | /* Send header packet to the session bus. */ | |
785 | std_session_send_df_header(cb_data, LOG_PREFIX); | |
786 | ||
96484e22 | 787 | if ((ret = logic16_start_acquisition(sdi)) != SR_OK) { |
7b5daad4 MC |
788 | abort_acquisition(devc); |
789 | return ret; | |
790 | } | |
c463dcf0 MC |
791 | |
792 | return SR_OK; | |
793 | } | |
794 | ||
795 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
796 | { | |
7b5daad4 MC |
797 | int ret; |
798 | ||
c463dcf0 MC |
799 | (void)cb_data; |
800 | ||
801 | if (sdi->status != SR_ST_ACTIVE) | |
802 | return SR_ERR_DEV_CLOSED; | |
803 | ||
96484e22 | 804 | ret = logic16_abort_acquisition(sdi); |
c463dcf0 | 805 | |
7b5daad4 MC |
806 | abort_acquisition(sdi->priv); |
807 | ||
808 | return ret; | |
c463dcf0 MC |
809 | } |
810 | ||
811 | SR_PRIV struct sr_dev_driver saleae_logic16_driver_info = { | |
812 | .name = "saleae-logic16", | |
813 | .longname = "Saleae Logic16", | |
814 | .api_version = 1, | |
815 | .init = init, | |
816 | .cleanup = cleanup, | |
817 | .scan = scan, | |
818 | .dev_list = dev_list, | |
819 | .dev_clear = dev_clear, | |
820 | .config_get = config_get, | |
821 | .config_set = config_set, | |
822 | .config_list = config_list, | |
823 | .dev_open = dev_open, | |
824 | .dev_close = dev_close, | |
825 | .dev_acquisition_start = dev_acquisition_start, | |
826 | .dev_acquisition_stop = dev_acquisition_stop, | |
827 | .priv = NULL, | |
828 | }; |