]>
Commit | Line | Data |
---|---|---|
0aba65da | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
0aba65da | 3 | * |
13d8e03c | 4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> |
0aba65da UH |
5 | * |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
21 | ||
22 | #define SERIALCOMM "115200/8n1" | |
23 | ||
e46aa4f6 | 24 | static const int32_t hwopts[] = { |
1953564a BV |
25 | SR_CONF_CONN, |
26 | SR_CONF_SERIALCOMM, | |
aeabd308 UH |
27 | }; |
28 | ||
e46aa4f6 | 29 | static const int32_t hwcaps[] = { |
1953564a BV |
30 | SR_CONF_LOGIC_ANALYZER, |
31 | SR_CONF_SAMPLERATE, | |
0c05591a | 32 | SR_CONF_TRIGGER_TYPE, |
1953564a BV |
33 | SR_CONF_CAPTURE_RATIO, |
34 | SR_CONF_LIMIT_SAMPLES, | |
35 | SR_CONF_RLE, | |
0aba65da UH |
36 | }; |
37 | ||
38 | /* Probes are numbered 0-31 (on the PCB silkscreen). */ | |
39 | SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = { | |
78693401 UH |
40 | "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", |
41 | "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", | |
42 | "24", "25", "26", "27", "28", "29", "30", "31", | |
0aba65da UH |
43 | NULL, |
44 | }; | |
45 | ||
d3b38ad3 | 46 | /* Default supported samplerates, can be overridden by device metadata. */ |
e46aa4f6 BV |
47 | static const uint64_t samplerates[] = { |
48 | SR_HZ(10), | |
49 | SR_MHZ(200), | |
50 | SR_HZ(1), | |
0aba65da UH |
51 | }; |
52 | ||
53 | SR_PRIV struct sr_dev_driver ols_driver_info; | |
54 | static struct sr_dev_driver *di = &ols_driver_info; | |
55 | ||
56 | static int hw_init(struct sr_context *sr_ctx) | |
57 | { | |
29a27196 | 58 | return std_hw_init(sr_ctx, di, LOG_PREFIX); |
0aba65da UH |
59 | } |
60 | ||
61 | static GSList *hw_scan(GSList *options) | |
62 | { | |
1987b8d6 | 63 | struct sr_config *src; |
0aba65da UH |
64 | struct sr_dev_inst *sdi; |
65 | struct drv_context *drvc; | |
66 | struct dev_context *devc; | |
67 | struct sr_probe *probe; | |
68 | struct sr_serial_dev_inst *serial; | |
69 | GPollFD probefd; | |
70 | GSList *l, *devices; | |
71 | int ret, i; | |
72 | const char *conn, *serialcomm; | |
73 | char buf[8]; | |
74 | ||
75 | (void)options; | |
4b97c74e | 76 | |
0aba65da | 77 | drvc = di->priv; |
4b97c74e | 78 | |
0aba65da UH |
79 | devices = NULL; |
80 | ||
81 | conn = serialcomm = NULL; | |
82 | for (l = options; l; l = l->next) { | |
1987b8d6 BV |
83 | src = l->data; |
84 | switch (src->key) { | |
1953564a | 85 | case SR_CONF_CONN: |
e46aa4f6 | 86 | conn = g_variant_get_string(src->data, NULL); |
0aba65da | 87 | break; |
1953564a | 88 | case SR_CONF_SERIALCOMM: |
e46aa4f6 | 89 | serialcomm = g_variant_get_string(src->data, NULL); |
0aba65da UH |
90 | break; |
91 | } | |
92 | } | |
93 | if (!conn) | |
94 | return NULL; | |
95 | ||
96 | if (serialcomm == NULL) | |
97 | serialcomm = SERIALCOMM; | |
98 | ||
99 | if (!(serial = sr_serial_dev_inst_new(conn, serialcomm))) | |
100 | return NULL; | |
101 | ||
102 | /* The discovery procedure is like this: first send the Reset | |
103 | * command (0x00) 5 times, since the device could be anywhere | |
104 | * in a 5-byte command. Then send the ID command (0x02). | |
105 | * If the device responds with 4 bytes ("OLS1" or "SLA1"), we | |
106 | * have a match. | |
107 | */ | |
108 | sr_info("Probing %s.", conn); | |
109 | if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK) | |
110 | return NULL; | |
111 | ||
112 | ret = SR_OK; | |
113 | for (i = 0; i < 5; i++) { | |
114 | if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) { | |
115 | sr_err("Port %s is not writable.", conn); | |
116 | break; | |
117 | } | |
118 | } | |
119 | if (ret != SR_OK) { | |
120 | serial_close(serial); | |
121 | sr_err("Could not use port %s. Quitting.", conn); | |
122 | return NULL; | |
123 | } | |
124 | send_shortcommand(serial, CMD_ID); | |
125 | ||
126 | /* Wait 10ms for a response. */ | |
127 | g_usleep(10000); | |
128 | ||
129 | probefd.fd = serial->fd; | |
130 | probefd.events = G_IO_IN; | |
131 | g_poll(&probefd, 1, 1); | |
132 | ||
133 | if (probefd.revents != G_IO_IN) | |
134 | return NULL; | |
135 | if (serial_read(serial, buf, 4) != 4) | |
136 | return NULL; | |
137 | if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) | |
138 | return NULL; | |
139 | ||
140 | /* Definitely using the OLS protocol, check if it supports | |
141 | * the metadata command. | |
142 | */ | |
143 | send_shortcommand(serial, CMD_METADATA); | |
144 | if (g_poll(&probefd, 1, 10) > 0) { | |
145 | /* Got metadata. */ | |
146 | sdi = get_metadata(serial); | |
147 | sdi->index = 0; | |
148 | devc = sdi->priv; | |
149 | } else { | |
150 | /* Not an OLS -- some other board that uses the sump protocol. */ | |
72cd99b8 | 151 | sr_info("Device does not support metadata."); |
0aba65da UH |
152 | sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, |
153 | "Sump", "Logic Analyzer", "v1.0"); | |
154 | sdi->driver = di; | |
0aba65da UH |
155 | for (i = 0; i < 32; i++) { |
156 | if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE, | |
157 | ols_probe_names[i]))) | |
158 | return 0; | |
159 | sdi->probes = g_slist_append(sdi->probes, probe); | |
160 | } | |
bf256783 | 161 | devc = ols_dev_new(); |
0aba65da UH |
162 | sdi->priv = devc; |
163 | } | |
bf256783 BV |
164 | /* Configure samplerate and divider. */ |
165 | if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK) | |
166 | sr_dbg("Failed to set default samplerate (%"PRIu64").", | |
167 | DEFAULT_SAMPLERATE); | |
168 | /* Clear trigger masks, values and stages. */ | |
169 | ols_configure_probes(sdi); | |
459a0f26 BV |
170 | sdi->inst_type = SR_INST_SERIAL; |
171 | sdi->conn = serial; | |
bf256783 | 172 | |
0aba65da UH |
173 | drvc->instances = g_slist_append(drvc->instances, sdi); |
174 | devices = g_slist_append(devices, sdi); | |
175 | ||
176 | serial_close(serial); | |
177 | ||
178 | return devices; | |
179 | } | |
180 | ||
181 | static GSList *hw_dev_list(void) | |
182 | { | |
0e94d524 | 183 | return ((struct drv_context *)(di->priv))->instances; |
0aba65da UH |
184 | } |
185 | ||
186 | static int hw_dev_open(struct sr_dev_inst *sdi) | |
187 | { | |
459a0f26 | 188 | struct sr_serial_dev_inst *serial; |
0aba65da | 189 | |
459a0f26 BV |
190 | serial = sdi->conn; |
191 | if (serial_open(serial, SERIAL_RDWR) != SR_OK) | |
0aba65da UH |
192 | return SR_ERR; |
193 | ||
194 | sdi->status = SR_ST_ACTIVE; | |
195 | ||
196 | return SR_OK; | |
197 | } | |
198 | ||
199 | static int hw_dev_close(struct sr_dev_inst *sdi) | |
200 | { | |
459a0f26 | 201 | struct sr_serial_dev_inst *serial; |
0aba65da | 202 | |
459a0f26 BV |
203 | serial = sdi->conn; |
204 | if (serial && serial->fd != -1) { | |
205 | serial_close(serial); | |
0aba65da UH |
206 | sdi->status = SR_ST_INACTIVE; |
207 | } | |
208 | ||
209 | return SR_OK; | |
210 | } | |
211 | ||
212 | static int hw_cleanup(void) | |
213 | { | |
214 | GSList *l; | |
215 | struct sr_dev_inst *sdi; | |
216 | struct drv_context *drvc; | |
217 | struct dev_context *devc; | |
459a0f26 | 218 | struct sr_serial_dev_inst *serial; |
0aba65da UH |
219 | int ret = SR_OK; |
220 | ||
221 | if (!(drvc = di->priv)) | |
222 | return SR_OK; | |
223 | ||
224 | /* Properly close and free all devices. */ | |
225 | for (l = drvc->instances; l; l = l->next) { | |
226 | if (!(sdi = l->data)) { | |
227 | /* Log error, but continue cleaning up the rest. */ | |
228 | sr_err("%s: sdi was NULL, continuing", __func__); | |
229 | ret = SR_ERR_BUG; | |
230 | continue; | |
231 | } | |
232 | if (!(devc = sdi->priv)) { | |
233 | /* Log error, but continue cleaning up the rest. */ | |
234 | sr_err("%s: sdi->priv was NULL, continuing", __func__); | |
235 | ret = SR_ERR_BUG; | |
236 | continue; | |
237 | } | |
238 | hw_dev_close(sdi); | |
459a0f26 BV |
239 | serial = sdi->conn; |
240 | sr_serial_dev_inst_free(serial); | |
0aba65da UH |
241 | sr_dev_inst_free(sdi); |
242 | } | |
243 | g_slist_free(drvc->instances); | |
244 | drvc->instances = NULL; | |
245 | ||
246 | return ret; | |
247 | } | |
248 | ||
e46aa4f6 | 249 | static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi) |
0aba65da UH |
250 | { |
251 | struct dev_context *devc; | |
252 | ||
0c05591a BV |
253 | if (!sdi) |
254 | return SR_ERR_ARG; | |
255 | ||
256 | devc = sdi->priv; | |
035a1078 | 257 | switch (id) { |
123e1313 | 258 | case SR_CONF_SAMPLERATE: |
0c05591a BV |
259 | *data = g_variant_new_uint64(devc->cur_samplerate); |
260 | break; | |
261 | case SR_CONF_CAPTURE_RATIO: | |
262 | *data = g_variant_new_uint64(devc->capture_ratio); | |
263 | break; | |
264 | case SR_CONF_LIMIT_SAMPLES: | |
265 | *data = g_variant_new_uint64(devc->limit_samples); | |
266 | break; | |
267 | case SR_CONF_RLE: | |
268 | *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE); | |
0aba65da UH |
269 | break; |
270 | default: | |
bd6fbf62 | 271 | return SR_ERR_NA; |
0aba65da UH |
272 | } |
273 | ||
274 | return SR_OK; | |
275 | } | |
276 | ||
e46aa4f6 | 277 | static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi) |
0aba65da UH |
278 | { |
279 | struct dev_context *devc; | |
280 | int ret; | |
e46aa4f6 | 281 | uint64_t tmp_u64; |
0aba65da | 282 | |
e73ffd42 BV |
283 | if (sdi->status != SR_ST_ACTIVE) |
284 | return SR_ERR_DEV_CLOSED; | |
285 | ||
0aba65da UH |
286 | devc = sdi->priv; |
287 | ||
035a1078 | 288 | switch (id) { |
1953564a | 289 | case SR_CONF_SAMPLERATE: |
e46aa4f6 BV |
290 | tmp_u64 = g_variant_get_uint64(data); |
291 | if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1]) | |
292 | return SR_ERR_SAMPLERATE; | |
293 | ret = ols_set_samplerate(sdi, g_variant_get_uint64(data)); | |
0aba65da | 294 | break; |
1953564a | 295 | case SR_CONF_LIMIT_SAMPLES: |
e46aa4f6 BV |
296 | tmp_u64 = g_variant_get_uint64(data); |
297 | if (tmp_u64 < MIN_NUM_SAMPLES) | |
0aba65da | 298 | return SR_ERR; |
e46aa4f6 | 299 | devc->limit_samples = tmp_u64; |
0aba65da UH |
300 | ret = SR_OK; |
301 | break; | |
1953564a | 302 | case SR_CONF_CAPTURE_RATIO: |
e46aa4f6 | 303 | devc->capture_ratio = g_variant_get_uint64(data); |
0aba65da UH |
304 | if (devc->capture_ratio < 0 || devc->capture_ratio > 100) { |
305 | devc->capture_ratio = 0; | |
306 | ret = SR_ERR; | |
307 | } else | |
308 | ret = SR_OK; | |
309 | break; | |
1953564a | 310 | case SR_CONF_RLE: |
e46aa4f6 | 311 | if (g_variant_get_boolean(data)) { |
0aba65da UH |
312 | sr_info("Enabling RLE."); |
313 | devc->flag_reg |= FLAG_RLE; | |
aeea0572 BV |
314 | } else { |
315 | sr_info("Disabling RLE."); | |
316 | devc->flag_reg &= ~FLAG_RLE; | |
0aba65da UH |
317 | } |
318 | ret = SR_OK; | |
319 | break; | |
320 | default: | |
bd6fbf62 | 321 | ret = SR_ERR_NA; |
0aba65da UH |
322 | } |
323 | ||
324 | return ret; | |
325 | } | |
326 | ||
e46aa4f6 | 327 | static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi) |
a1c743fc | 328 | { |
e46aa4f6 BV |
329 | GVariant *gvar; |
330 | GVariantBuilder gvb; | |
a1c743fc BV |
331 | |
332 | (void)sdi; | |
333 | ||
334 | switch (key) { | |
0d485e30 | 335 | case SR_CONF_SCAN_OPTIONS: |
e46aa4f6 BV |
336 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, |
337 | hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t)); | |
0d485e30 | 338 | break; |
9a6517d1 | 339 | case SR_CONF_DEVICE_OPTIONS: |
e46aa4f6 BV |
340 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, |
341 | hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t)); | |
9a6517d1 | 342 | break; |
a1c743fc | 343 | case SR_CONF_SAMPLERATE: |
e46aa4f6 BV |
344 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); |
345 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates, | |
346 | ARRAY_SIZE(samplerates), sizeof(uint64_t)); | |
347 | g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar); | |
348 | *data = g_variant_builder_end(&gvb); | |
a1c743fc | 349 | break; |
c50277a6 | 350 | case SR_CONF_TRIGGER_TYPE: |
e46aa4f6 | 351 | *data = g_variant_new_string(TRIGGER_TYPE); |
c50277a6 | 352 | break; |
a1c743fc | 353 | default: |
bd6fbf62 | 354 | return SR_ERR_NA; |
a1c743fc BV |
355 | } |
356 | ||
357 | return SR_OK; | |
358 | } | |
359 | ||
0aba65da UH |
360 | static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi, |
361 | void *cb_data) | |
362 | { | |
0aba65da | 363 | struct dev_context *devc; |
459a0f26 | 364 | struct sr_serial_dev_inst *serial; |
0aba65da UH |
365 | uint32_t trigger_config[4]; |
366 | uint32_t data; | |
367 | uint16_t readcount, delaycount; | |
368 | uint8_t changrp_mask; | |
369 | int num_channels; | |
370 | int i; | |
371 | ||
e73ffd42 BV |
372 | if (sdi->status != SR_ST_ACTIVE) |
373 | return SR_ERR_DEV_CLOSED; | |
374 | ||
0aba65da | 375 | devc = sdi->priv; |
459a0f26 | 376 | serial = sdi->conn; |
0aba65da | 377 | |
0aba65da UH |
378 | if (ols_configure_probes(sdi) != SR_OK) { |
379 | sr_err("Failed to configure probes."); | |
380 | return SR_ERR; | |
381 | } | |
382 | ||
383 | /* | |
384 | * Enable/disable channel groups in the flag register according to the | |
385 | * probe mask. Calculate this here, because num_channels is needed | |
386 | * to limit readcount. | |
387 | */ | |
388 | changrp_mask = 0; | |
389 | num_channels = 0; | |
390 | for (i = 0; i < 4; i++) { | |
391 | if (devc->probe_mask & (0xff << (i * 8))) { | |
392 | changrp_mask |= (1 << i); | |
393 | num_channels++; | |
394 | } | |
395 | } | |
396 | ||
397 | /* | |
398 | * Limit readcount to prevent reading past the end of the hardware | |
399 | * buffer. | |
400 | */ | |
401 | readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4; | |
402 | ||
403 | memset(trigger_config, 0, 16); | |
2e5b73c0 | 404 | trigger_config[devc->num_stages] |= 0x08; |
0aba65da UH |
405 | if (devc->trigger_mask[0]) { |
406 | delaycount = readcount * (1 - devc->capture_ratio / 100.0); | |
407 | devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages; | |
408 | ||
459a0f26 | 409 | if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0, |
0aba65da UH |
410 | reverse32(devc->trigger_mask[0])) != SR_OK) |
411 | return SR_ERR; | |
459a0f26 | 412 | if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0, |
0aba65da UH |
413 | reverse32(devc->trigger_value[0])) != SR_OK) |
414 | return SR_ERR; | |
459a0f26 | 415 | if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0, |
0aba65da UH |
416 | trigger_config[0]) != SR_OK) |
417 | return SR_ERR; | |
418 | ||
459a0f26 | 419 | if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_1, |
0aba65da UH |
420 | reverse32(devc->trigger_mask[1])) != SR_OK) |
421 | return SR_ERR; | |
459a0f26 | 422 | if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_1, |
0aba65da UH |
423 | reverse32(devc->trigger_value[1])) != SR_OK) |
424 | return SR_ERR; | |
459a0f26 | 425 | if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_1, |
0aba65da UH |
426 | trigger_config[1]) != SR_OK) |
427 | return SR_ERR; | |
428 | ||
459a0f26 | 429 | if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_2, |
0aba65da UH |
430 | reverse32(devc->trigger_mask[2])) != SR_OK) |
431 | return SR_ERR; | |
459a0f26 | 432 | if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_2, |
0aba65da UH |
433 | reverse32(devc->trigger_value[2])) != SR_OK) |
434 | return SR_ERR; | |
459a0f26 | 435 | if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_2, |
0aba65da UH |
436 | trigger_config[2]) != SR_OK) |
437 | return SR_ERR; | |
438 | ||
459a0f26 | 439 | if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_3, |
0aba65da UH |
440 | reverse32(devc->trigger_mask[3])) != SR_OK) |
441 | return SR_ERR; | |
459a0f26 | 442 | if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_3, |
0aba65da UH |
443 | reverse32(devc->trigger_value[3])) != SR_OK) |
444 | return SR_ERR; | |
459a0f26 | 445 | if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_3, |
0aba65da UH |
446 | trigger_config[3]) != SR_OK) |
447 | return SR_ERR; | |
448 | } else { | |
459a0f26 | 449 | if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0, |
0aba65da UH |
450 | devc->trigger_mask[0]) != SR_OK) |
451 | return SR_ERR; | |
459a0f26 | 452 | if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0, |
0aba65da UH |
453 | devc->trigger_value[0]) != SR_OK) |
454 | return SR_ERR; | |
459a0f26 | 455 | if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0, |
0aba65da UH |
456 | 0x00000008) != SR_OK) |
457 | return SR_ERR; | |
458 | delaycount = readcount; | |
459 | } | |
460 | ||
461 | sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, " | |
462 | "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider, | |
463 | devc->flag_reg & FLAG_DEMUX ? "on" : "off"); | |
459a0f26 | 464 | if (send_longcommand(serial, CMD_SET_DIVIDER, |
0aba65da UH |
465 | reverse32(devc->cur_samplerate_divider)) != SR_OK) |
466 | return SR_ERR; | |
467 | ||
468 | /* Send sample limit and pre/post-trigger capture ratio. */ | |
469 | data = ((readcount - 1) & 0xffff) << 16; | |
470 | data |= (delaycount - 1) & 0xffff; | |
459a0f26 | 471 | if (send_longcommand(serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK) |
0aba65da UH |
472 | return SR_ERR; |
473 | ||
474 | /* The flag register wants them here, and 1 means "disable channel". */ | |
475 | devc->flag_reg |= ~(changrp_mask << 2) & 0x3c; | |
476 | devc->flag_reg |= FLAG_FILTER; | |
477 | devc->rle_count = 0; | |
478 | data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000); | |
459a0f26 | 479 | if (send_longcommand(serial, CMD_SET_FLAGS, data) != SR_OK) |
0aba65da UH |
480 | return SR_ERR; |
481 | ||
482 | /* Start acquisition on the device. */ | |
459a0f26 | 483 | if (send_shortcommand(serial, CMD_RUN) != SR_OK) |
0aba65da UH |
484 | return SR_ERR; |
485 | ||
bf256783 BV |
486 | /* Reset all operational states. */ |
487 | devc->num_transfers = devc->num_samples = devc->num_bytes = 0; | |
488 | ||
4afdfd46 | 489 | /* Send header packet to the session bus. */ |
29a27196 | 490 | std_session_send_df_header(cb_data, LOG_PREFIX); |
4afdfd46 | 491 | |
459a0f26 | 492 | sr_source_add(serial->fd, G_IO_IN, -1, ols_receive_data, cb_data); |
0aba65da | 493 | |
0aba65da UH |
494 | return SR_OK; |
495 | } | |
496 | ||
0aba65da UH |
497 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) |
498 | { | |
499 | /* Avoid compiler warnings. */ | |
500 | (void)cb_data; | |
501 | ||
502 | abort_acquisition(sdi); | |
503 | ||
504 | return SR_OK; | |
505 | } | |
506 | ||
507 | SR_PRIV struct sr_dev_driver ols_driver_info = { | |
508 | .name = "ols", | |
509 | .longname = "Openbench Logic Sniffer", | |
510 | .api_version = 1, | |
511 | .init = hw_init, | |
512 | .cleanup = hw_cleanup, | |
513 | .scan = hw_scan, | |
514 | .dev_list = hw_dev_list, | |
515 | .dev_clear = hw_cleanup, | |
035a1078 BV |
516 | .config_get = config_get, |
517 | .config_set = config_set, | |
a1c743fc | 518 | .config_list = config_list, |
0aba65da UH |
519 | .dev_open = hw_dev_open, |
520 | .dev_close = hw_dev_close, | |
0aba65da UH |
521 | .dev_acquisition_start = hw_dev_acquisition_start, |
522 | .dev_acquisition_stop = hw_dev_acquisition_stop, | |
523 | .priv = NULL, | |
524 | }; |