]>
Commit | Line | Data |
---|---|---|
0aba65da UH |
1 | /* |
2 | * This file is part of the sigrok project. | |
3 | * | |
4 | * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
21 | ||
22 | #define SERIALCOMM "115200/8n1" | |
23 | ||
aeabd308 | 24 | static const int hwopts[] = { |
1953564a BV |
25 | SR_CONF_CONN, |
26 | SR_CONF_SERIALCOMM, | |
aeabd308 UH |
27 | 0, |
28 | }; | |
29 | ||
0aba65da | 30 | static const int hwcaps[] = { |
1953564a BV |
31 | SR_CONF_LOGIC_ANALYZER, |
32 | SR_CONF_SAMPLERATE, | |
33 | SR_CONF_CAPTURE_RATIO, | |
34 | SR_CONF_LIMIT_SAMPLES, | |
35 | SR_CONF_RLE, | |
0aba65da UH |
36 | 0, |
37 | }; | |
38 | ||
39 | /* Probes are numbered 0-31 (on the PCB silkscreen). */ | |
40 | SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = { | |
78693401 UH |
41 | "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", |
42 | "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", | |
43 | "24", "25", "26", "27", "28", "29", "30", "31", | |
0aba65da UH |
44 | NULL, |
45 | }; | |
46 | ||
47 | /* default supported samplerates, can be overridden by device metadata */ | |
48 | static const struct sr_samplerates samplerates = { | |
49 | SR_HZ(10), | |
50 | SR_MHZ(200), | |
51 | SR_HZ(1), | |
52 | NULL, | |
53 | }; | |
54 | ||
55 | SR_PRIV struct sr_dev_driver ols_driver_info; | |
56 | static struct sr_dev_driver *di = &ols_driver_info; | |
57 | ||
58 | static int hw_init(struct sr_context *sr_ctx) | |
59 | { | |
60 | struct drv_context *drvc; | |
61 | ||
62 | if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) { | |
63 | sr_err("Driver context malloc failed."); | |
64 | return SR_ERR_MALLOC; | |
65 | } | |
66 | drvc->sr_ctx = sr_ctx; | |
67 | di->priv = drvc; | |
68 | ||
69 | return SR_OK; | |
70 | } | |
71 | ||
72 | static GSList *hw_scan(GSList *options) | |
73 | { | |
1987b8d6 | 74 | struct sr_config *src; |
0aba65da UH |
75 | struct sr_dev_inst *sdi; |
76 | struct drv_context *drvc; | |
77 | struct dev_context *devc; | |
78 | struct sr_probe *probe; | |
79 | struct sr_serial_dev_inst *serial; | |
80 | GPollFD probefd; | |
81 | GSList *l, *devices; | |
82 | int ret, i; | |
83 | const char *conn, *serialcomm; | |
84 | char buf[8]; | |
85 | ||
86 | (void)options; | |
87 | drvc = di->priv; | |
88 | devices = NULL; | |
89 | ||
90 | conn = serialcomm = NULL; | |
91 | for (l = options; l; l = l->next) { | |
1987b8d6 BV |
92 | src = l->data; |
93 | switch (src->key) { | |
1953564a | 94 | case SR_CONF_CONN: |
1987b8d6 | 95 | conn = src->value; |
0aba65da | 96 | break; |
1953564a | 97 | case SR_CONF_SERIALCOMM: |
1987b8d6 | 98 | serialcomm = src->value; |
0aba65da UH |
99 | break; |
100 | } | |
101 | } | |
102 | if (!conn) | |
103 | return NULL; | |
104 | ||
105 | if (serialcomm == NULL) | |
106 | serialcomm = SERIALCOMM; | |
107 | ||
108 | if (!(serial = sr_serial_dev_inst_new(conn, serialcomm))) | |
109 | return NULL; | |
110 | ||
111 | /* The discovery procedure is like this: first send the Reset | |
112 | * command (0x00) 5 times, since the device could be anywhere | |
113 | * in a 5-byte command. Then send the ID command (0x02). | |
114 | * If the device responds with 4 bytes ("OLS1" or "SLA1"), we | |
115 | * have a match. | |
116 | */ | |
117 | sr_info("Probing %s.", conn); | |
118 | if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK) | |
119 | return NULL; | |
120 | ||
121 | ret = SR_OK; | |
122 | for (i = 0; i < 5; i++) { | |
123 | if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) { | |
124 | sr_err("Port %s is not writable.", conn); | |
125 | break; | |
126 | } | |
127 | } | |
128 | if (ret != SR_OK) { | |
129 | serial_close(serial); | |
130 | sr_err("Could not use port %s. Quitting.", conn); | |
131 | return NULL; | |
132 | } | |
133 | send_shortcommand(serial, CMD_ID); | |
134 | ||
135 | /* Wait 10ms for a response. */ | |
136 | g_usleep(10000); | |
137 | ||
138 | probefd.fd = serial->fd; | |
139 | probefd.events = G_IO_IN; | |
140 | g_poll(&probefd, 1, 1); | |
141 | ||
142 | if (probefd.revents != G_IO_IN) | |
143 | return NULL; | |
144 | if (serial_read(serial, buf, 4) != 4) | |
145 | return NULL; | |
146 | if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) | |
147 | return NULL; | |
148 | ||
149 | /* Definitely using the OLS protocol, check if it supports | |
150 | * the metadata command. | |
151 | */ | |
152 | send_shortcommand(serial, CMD_METADATA); | |
153 | if (g_poll(&probefd, 1, 10) > 0) { | |
154 | /* Got metadata. */ | |
155 | sdi = get_metadata(serial); | |
156 | sdi->index = 0; | |
157 | devc = sdi->priv; | |
158 | } else { | |
159 | /* Not an OLS -- some other board that uses the sump protocol. */ | |
160 | sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, | |
161 | "Sump", "Logic Analyzer", "v1.0"); | |
162 | sdi->driver = di; | |
163 | devc = ols_dev_new(); | |
164 | for (i = 0; i < 32; i++) { | |
165 | if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE, | |
166 | ols_probe_names[i]))) | |
167 | return 0; | |
168 | sdi->probes = g_slist_append(sdi->probes, probe); | |
169 | } | |
170 | sdi->priv = devc; | |
171 | } | |
172 | devc->serial = serial; | |
173 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
174 | devices = g_slist_append(devices, sdi); | |
175 | ||
176 | serial_close(serial); | |
177 | ||
178 | return devices; | |
179 | } | |
180 | ||
181 | static GSList *hw_dev_list(void) | |
182 | { | |
183 | struct drv_context *drvc; | |
184 | ||
185 | drvc = di->priv; | |
186 | ||
187 | return drvc->instances; | |
188 | } | |
189 | ||
190 | static int hw_dev_open(struct sr_dev_inst *sdi) | |
191 | { | |
192 | struct dev_context *devc; | |
193 | ||
194 | devc = sdi->priv; | |
195 | ||
196 | if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK) | |
197 | return SR_ERR; | |
198 | ||
199 | sdi->status = SR_ST_ACTIVE; | |
200 | ||
201 | return SR_OK; | |
202 | } | |
203 | ||
204 | static int hw_dev_close(struct sr_dev_inst *sdi) | |
205 | { | |
206 | struct dev_context *devc; | |
207 | ||
208 | devc = sdi->priv; | |
209 | ||
210 | if (devc->serial && devc->serial->fd != -1) { | |
211 | serial_close(devc->serial); | |
212 | sdi->status = SR_ST_INACTIVE; | |
213 | } | |
214 | ||
215 | return SR_OK; | |
216 | } | |
217 | ||
218 | static int hw_cleanup(void) | |
219 | { | |
220 | GSList *l; | |
221 | struct sr_dev_inst *sdi; | |
222 | struct drv_context *drvc; | |
223 | struct dev_context *devc; | |
224 | int ret = SR_OK; | |
225 | ||
226 | if (!(drvc = di->priv)) | |
227 | return SR_OK; | |
228 | ||
229 | /* Properly close and free all devices. */ | |
230 | for (l = drvc->instances; l; l = l->next) { | |
231 | if (!(sdi = l->data)) { | |
232 | /* Log error, but continue cleaning up the rest. */ | |
233 | sr_err("%s: sdi was NULL, continuing", __func__); | |
234 | ret = SR_ERR_BUG; | |
235 | continue; | |
236 | } | |
237 | if (!(devc = sdi->priv)) { | |
238 | /* Log error, but continue cleaning up the rest. */ | |
239 | sr_err("%s: sdi->priv was NULL, continuing", __func__); | |
240 | ret = SR_ERR_BUG; | |
241 | continue; | |
242 | } | |
243 | hw_dev_close(sdi); | |
244 | sr_serial_dev_inst_free(devc->serial); | |
245 | sr_dev_inst_free(sdi); | |
246 | } | |
247 | g_slist_free(drvc->instances); | |
248 | drvc->instances = NULL; | |
249 | ||
250 | return ret; | |
251 | } | |
252 | ||
253 | static int hw_info_get(int info_id, const void **data, | |
254 | const struct sr_dev_inst *sdi) | |
255 | { | |
256 | struct dev_context *devc; | |
257 | ||
258 | switch (info_id) { | |
aeabd308 UH |
259 | case SR_DI_HWOPTS: |
260 | *data = hwopts; | |
261 | break; | |
0aba65da UH |
262 | case SR_DI_HWCAPS: |
263 | *data = hwcaps; | |
264 | break; | |
0aba65da UH |
265 | case SR_DI_SAMPLERATES: |
266 | *data = &samplerates; | |
267 | break; | |
268 | case SR_DI_TRIGGER_TYPES: | |
269 | *data = (char *)TRIGGER_TYPES; | |
270 | break; | |
271 | case SR_DI_CUR_SAMPLERATE: | |
272 | if (sdi) { | |
273 | devc = sdi->priv; | |
274 | *data = &devc->cur_samplerate; | |
275 | } else | |
276 | return SR_ERR; | |
277 | break; | |
278 | default: | |
279 | return SR_ERR_ARG; | |
280 | } | |
281 | ||
282 | return SR_OK; | |
283 | } | |
284 | ||
285 | static int hw_dev_config_set(const struct sr_dev_inst *sdi, int hwcap, | |
286 | const void *value) | |
287 | { | |
288 | struct dev_context *devc; | |
289 | int ret; | |
290 | const uint64_t *tmp_u64; | |
291 | ||
292 | devc = sdi->priv; | |
293 | ||
294 | if (sdi->status != SR_ST_ACTIVE) | |
295 | return SR_ERR; | |
296 | ||
297 | switch (hwcap) { | |
1953564a | 298 | case SR_CONF_SAMPLERATE: |
0aba65da UH |
299 | ret = ols_set_samplerate(sdi, *(const uint64_t *)value, |
300 | &samplerates); | |
301 | break; | |
1953564a | 302 | case SR_CONF_LIMIT_SAMPLES: |
0aba65da UH |
303 | tmp_u64 = value; |
304 | if (*tmp_u64 < MIN_NUM_SAMPLES) | |
305 | return SR_ERR; | |
306 | if (*tmp_u64 > devc->max_samples) | |
307 | sr_err("Sample limit exceeds hardware maximum."); | |
308 | devc->limit_samples = *tmp_u64; | |
309 | sr_info("Sample limit is %" PRIu64 ".", devc->limit_samples); | |
310 | ret = SR_OK; | |
311 | break; | |
1953564a | 312 | case SR_CONF_CAPTURE_RATIO: |
0aba65da UH |
313 | devc->capture_ratio = *(const uint64_t *)value; |
314 | if (devc->capture_ratio < 0 || devc->capture_ratio > 100) { | |
315 | devc->capture_ratio = 0; | |
316 | ret = SR_ERR; | |
317 | } else | |
318 | ret = SR_OK; | |
319 | break; | |
1953564a | 320 | case SR_CONF_RLE: |
0aba65da UH |
321 | if (GPOINTER_TO_INT(value)) { |
322 | sr_info("Enabling RLE."); | |
323 | devc->flag_reg |= FLAG_RLE; | |
324 | } | |
325 | ret = SR_OK; | |
326 | break; | |
327 | default: | |
328 | ret = SR_ERR; | |
329 | } | |
330 | ||
331 | return ret; | |
332 | } | |
333 | ||
334 | static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi, | |
335 | void *cb_data) | |
336 | { | |
337 | struct sr_datafeed_packet *packet; | |
338 | struct sr_datafeed_header *header; | |
0aba65da UH |
339 | struct dev_context *devc; |
340 | uint32_t trigger_config[4]; | |
341 | uint32_t data; | |
342 | uint16_t readcount, delaycount; | |
343 | uint8_t changrp_mask; | |
344 | int num_channels; | |
345 | int i; | |
346 | ||
347 | devc = sdi->priv; | |
348 | ||
349 | if (sdi->status != SR_ST_ACTIVE) | |
350 | return SR_ERR; | |
351 | ||
352 | if (ols_configure_probes(sdi) != SR_OK) { | |
353 | sr_err("Failed to configure probes."); | |
354 | return SR_ERR; | |
355 | } | |
356 | ||
357 | /* | |
358 | * Enable/disable channel groups in the flag register according to the | |
359 | * probe mask. Calculate this here, because num_channels is needed | |
360 | * to limit readcount. | |
361 | */ | |
362 | changrp_mask = 0; | |
363 | num_channels = 0; | |
364 | for (i = 0; i < 4; i++) { | |
365 | if (devc->probe_mask & (0xff << (i * 8))) { | |
366 | changrp_mask |= (1 << i); | |
367 | num_channels++; | |
368 | } | |
369 | } | |
370 | ||
371 | /* | |
372 | * Limit readcount to prevent reading past the end of the hardware | |
373 | * buffer. | |
374 | */ | |
375 | readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4; | |
376 | ||
377 | memset(trigger_config, 0, 16); | |
378 | trigger_config[devc->num_stages - 1] |= 0x08; | |
379 | if (devc->trigger_mask[0]) { | |
380 | delaycount = readcount * (1 - devc->capture_ratio / 100.0); | |
381 | devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages; | |
382 | ||
383 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0, | |
384 | reverse32(devc->trigger_mask[0])) != SR_OK) | |
385 | return SR_ERR; | |
386 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0, | |
387 | reverse32(devc->trigger_value[0])) != SR_OK) | |
388 | return SR_ERR; | |
389 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0, | |
390 | trigger_config[0]) != SR_OK) | |
391 | return SR_ERR; | |
392 | ||
393 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_1, | |
394 | reverse32(devc->trigger_mask[1])) != SR_OK) | |
395 | return SR_ERR; | |
396 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_1, | |
397 | reverse32(devc->trigger_value[1])) != SR_OK) | |
398 | return SR_ERR; | |
399 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_1, | |
400 | trigger_config[1]) != SR_OK) | |
401 | return SR_ERR; | |
402 | ||
403 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_2, | |
404 | reverse32(devc->trigger_mask[2])) != SR_OK) | |
405 | return SR_ERR; | |
406 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_2, | |
407 | reverse32(devc->trigger_value[2])) != SR_OK) | |
408 | return SR_ERR; | |
409 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_2, | |
410 | trigger_config[2]) != SR_OK) | |
411 | return SR_ERR; | |
412 | ||
413 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_3, | |
414 | reverse32(devc->trigger_mask[3])) != SR_OK) | |
415 | return SR_ERR; | |
416 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_3, | |
417 | reverse32(devc->trigger_value[3])) != SR_OK) | |
418 | return SR_ERR; | |
419 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_3, | |
420 | trigger_config[3]) != SR_OK) | |
421 | return SR_ERR; | |
422 | } else { | |
423 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0, | |
424 | devc->trigger_mask[0]) != SR_OK) | |
425 | return SR_ERR; | |
426 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0, | |
427 | devc->trigger_value[0]) != SR_OK) | |
428 | return SR_ERR; | |
429 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0, | |
430 | 0x00000008) != SR_OK) | |
431 | return SR_ERR; | |
432 | delaycount = readcount; | |
433 | } | |
434 | ||
435 | sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, " | |
436 | "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider, | |
437 | devc->flag_reg & FLAG_DEMUX ? "on" : "off"); | |
438 | if (send_longcommand(devc->serial, CMD_SET_DIVIDER, | |
439 | reverse32(devc->cur_samplerate_divider)) != SR_OK) | |
440 | return SR_ERR; | |
441 | ||
442 | /* Send sample limit and pre/post-trigger capture ratio. */ | |
443 | data = ((readcount - 1) & 0xffff) << 16; | |
444 | data |= (delaycount - 1) & 0xffff; | |
445 | if (send_longcommand(devc->serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK) | |
446 | return SR_ERR; | |
447 | ||
448 | /* The flag register wants them here, and 1 means "disable channel". */ | |
449 | devc->flag_reg |= ~(changrp_mask << 2) & 0x3c; | |
450 | devc->flag_reg |= FLAG_FILTER; | |
451 | devc->rle_count = 0; | |
452 | data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000); | |
453 | if (send_longcommand(devc->serial, CMD_SET_FLAGS, data) != SR_OK) | |
454 | return SR_ERR; | |
455 | ||
456 | /* Start acquisition on the device. */ | |
457 | if (send_shortcommand(devc->serial, CMD_RUN) != SR_OK) | |
458 | return SR_ERR; | |
459 | ||
460 | sr_source_add(devc->serial->fd, G_IO_IN, -1, ols_receive_data, | |
461 | cb_data); | |
462 | ||
463 | if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) { | |
464 | sr_err("Datafeed packet malloc failed."); | |
465 | return SR_ERR_MALLOC; | |
466 | } | |
467 | ||
468 | if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) { | |
469 | sr_err("Datafeed header malloc failed."); | |
470 | g_free(packet); | |
471 | return SR_ERR_MALLOC; | |
472 | } | |
473 | ||
474 | /* Send header packet to the session bus. */ | |
475 | packet->type = SR_DF_HEADER; | |
476 | packet->payload = (unsigned char *)header; | |
477 | header->feed_version = 1; | |
478 | gettimeofday(&header->starttime, NULL); | |
479 | sr_session_send(cb_data, packet); | |
480 | ||
0aba65da UH |
481 | g_free(header); |
482 | g_free(packet); | |
483 | ||
484 | return SR_OK; | |
485 | } | |
486 | ||
487 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ | |
488 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
489 | { | |
490 | /* Avoid compiler warnings. */ | |
491 | (void)cb_data; | |
492 | ||
493 | abort_acquisition(sdi); | |
494 | ||
495 | return SR_OK; | |
496 | } | |
497 | ||
498 | SR_PRIV struct sr_dev_driver ols_driver_info = { | |
499 | .name = "ols", | |
500 | .longname = "Openbench Logic Sniffer", | |
501 | .api_version = 1, | |
502 | .init = hw_init, | |
503 | .cleanup = hw_cleanup, | |
504 | .scan = hw_scan, | |
505 | .dev_list = hw_dev_list, | |
506 | .dev_clear = hw_cleanup, | |
507 | .dev_open = hw_dev_open, | |
508 | .dev_close = hw_dev_close, | |
509 | .info_get = hw_info_get, | |
510 | .dev_config_set = hw_dev_config_set, | |
511 | .dev_acquisition_start = hw_dev_acquisition_start, | |
512 | .dev_acquisition_stop = hw_dev_acquisition_stop, | |
513 | .priv = NULL, | |
514 | }; |