]>
Commit | Line | Data |
---|---|---|
601fb67c | 1 | /* |
c5d6f5cc | 2 | * This file is part of the libsigrok project. |
601fb67c AG |
3 | * |
4 | * Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
601fb67c | 21 | |
c5d6f5cc UH |
22 | #define MAX_PACKET_LEN 22 |
23 | ||
24 | /* Flags passed from the DMM. */ | |
601fb67c | 25 | struct brymen_flags { |
c5d6f5cc UH |
26 | gboolean is_low_batt, is_decibel, is_duty_cycle, is_hertz, is_amp; |
27 | gboolean is_beep, is_ohm, is_fahrenheit, is_celsius, is_capacitance; | |
28 | gboolean is_diode, is_volt, is_dc, is_ac; | |
601fb67c AG |
29 | }; |
30 | ||
31 | struct bm850_command { | |
32 | uint8_t dle; | |
33 | uint8_t stx; | |
34 | uint8_t cmd; | |
35 | uint8_t arg[2]; | |
36 | uint8_t checksum; | |
37 | uint8_t dle2; | |
38 | uint8_t etx; | |
39 | }; | |
40 | ||
41 | struct brymen_header { | |
42 | uint8_t dle; | |
43 | uint8_t stx; | |
44 | uint8_t cmd; | |
45 | uint8_t len; | |
46 | }; | |
47 | ||
48 | struct brymen_tail { | |
49 | uint8_t checksum; | |
50 | uint8_t dle; | |
51 | uint8_t etx; | |
52 | }; | |
53 | ||
54 | /* | |
55 | * We only have one command because we only support the BM-857. However, the | |
c5d6f5cc UH |
56 | * driver is easily extensible to support more models, as the protocols are |
57 | * very similar. | |
601fb67c AG |
58 | */ |
59 | enum { | |
60 | BM_CMD_REQUEST_READING = 0x00, | |
61 | }; | |
62 | ||
601fb67c AG |
63 | static int bm_send_command(uint8_t command, uint8_t arg1, uint8_t arg2, |
64 | struct sr_serial_dev_inst *serial) | |
65 | { | |
c5d6f5cc UH |
66 | struct bm850_command cmdout; |
67 | int written; | |
68 | ||
69 | cmdout.dle = 0x10; | |
70 | cmdout.stx = 0x02; | |
71 | cmdout.cmd = command; | |
72 | cmdout.arg[0] = arg1; | |
73 | cmdout.arg[1] = arg2; | |
74 | cmdout.checksum = arg1 ^ arg2; | |
75 | cmdout.dle2 = 0x10; | |
76 | cmdout.etx = 0x03; | |
77 | ||
78 | /* TODO: How to compute the checksum? Hardware seems to ignore it. */ | |
79 | ||
80 | /* Request reading. */ | |
81 | written = serial_write(serial, &cmdout, sizeof(cmdout)); | |
82 | if (written != sizeof(cmdout)) | |
83 | return SR_ERR; | |
84 | ||
85 | return SR_OK; | |
601fb67c AG |
86 | } |
87 | ||
88 | SR_PRIV int brymen_packet_request(struct sr_serial_dev_inst *serial) | |
89 | { | |
90 | return bm_send_command(BM_CMD_REQUEST_READING, 0, 0, serial); | |
91 | } | |
92 | ||
93 | SR_PRIV int brymen_packet_length(const uint8_t *buf, int *len) | |
94 | { | |
95 | struct brymen_header *hdr; | |
601fb67c | 96 | int packet_len; |
c5d6f5cc UH |
97 | size_t buflen; |
98 | ||
99 | buflen = *len; | |
100 | hdr = (void *)buf; | |
101 | ||
601fb67c | 102 | /* Did we receive a complete header yet? */ |
c5d6f5cc | 103 | if (buflen < sizeof(*hdr)) |
601fb67c | 104 | return PACKET_NEED_MORE_DATA; |
c5d6f5cc | 105 | |
601fb67c AG |
106 | if (hdr->dle != 0x10 || hdr->stx != 0x02) |
107 | return PACKET_INVALID_HEADER; | |
c5d6f5cc UH |
108 | |
109 | /* Our packet includes the header, the payload, and the tail. */ | |
601fb67c | 110 | packet_len = sizeof(*hdr) + hdr->len + sizeof(struct brymen_tail); |
c5d6f5cc UH |
111 | |
112 | /* In case we pick up an invalid header, limit our search. */ | |
113 | if (packet_len > MAX_PACKET_LEN) { | |
601fb67c AG |
114 | sr_spew("Header specifies an invalid payload length: %i.", |
115 | hdr->len); | |
116 | return PACKET_INVALID_HEADER; | |
117 | } | |
c5d6f5cc | 118 | |
601fb67c AG |
119 | *len = packet_len; |
120 | sr_spew("Expecting a %d-byte packet.", *len); | |
121 | return PACKET_HEADER_OK; | |
122 | } | |
123 | ||
124 | SR_PRIV gboolean brymen_packet_is_valid(const uint8_t *buf) | |
125 | { | |
126 | struct brymen_header *hdr; | |
127 | struct brymen_tail *tail; | |
128 | int i; | |
129 | uint8_t chksum = 0; | |
c5d6f5cc | 130 | uint8_t *payload; |
601fb67c | 131 | |
c5d6f5cc UH |
132 | payload = (uint8_t *)(buf + sizeof(struct brymen_header)); |
133 | ||
134 | hdr = (void *)buf; | |
135 | tail = (void *)(payload + hdr->len); | |
601fb67c AG |
136 | |
137 | for (i = 0; i< hdr->len; i++) | |
138 | chksum ^= payload[i]; | |
139 | ||
140 | if (tail->checksum != chksum) { | |
c5d6f5cc | 141 | sr_dbg("Packet has invalid checksum 0x%.2x. Expected 0x%.2x.", |
601fb67c AG |
142 | chksum, tail->checksum); |
143 | return FALSE; | |
144 | } | |
145 | ||
146 | return TRUE; | |
147 | } | |
148 | ||
c5d6f5cc | 149 | static int parse_value(const char *strbuf, int len, float *floatval) |
601fb67c AG |
150 | { |
151 | int s, d; | |
152 | char str[32]; | |
153 | ||
154 | if (strstr(strbuf, "OL")) { | |
155 | sr_dbg("Overlimit."); | |
156 | *floatval = INFINITY; | |
157 | return SR_OK; | |
158 | } | |
159 | ||
160 | memset(str, 0, sizeof(str)); | |
c5d6f5cc | 161 | /* Spaces may interfere with strtod parsing the exponent. Strip them. */ |
601fb67c AG |
162 | for (s = 0, d = 0; s < len; s++) |
163 | if (strbuf[s] != ' ') | |
164 | str[d++] = strbuf[s]; | |
c5d6f5cc | 165 | /* Yes, it's that simple! */ |
601fb67c AG |
166 | *floatval = strtod(str, NULL); |
167 | ||
168 | return SR_OK; | |
169 | } | |
c5d6f5cc | 170 | |
601fb67c AG |
171 | static void parse_flags(const uint8_t *buf, struct brymen_flags *info) |
172 | { | |
c5d6f5cc UH |
173 | info->is_low_batt = (buf[4 + 3] & (1 << 7)) != 0; |
174 | ||
175 | info->is_decibel = (buf[4 + 1] & (1 << 5)) != 0; | |
176 | info->is_duty_cycle = (buf[4 + 1] & (1 << 3)) != 0; | |
177 | info->is_hertz = (buf[4 + 1] & (1 << 2)) != 0; | |
178 | info->is_amp = (buf[4 + 1] & (1 << 1)) != 0; | |
179 | info->is_beep = (buf[4 + 1] & (1 << 0)) != 0; | |
180 | ||
181 | info->is_ohm = (buf[4 + 0] & (1 << 7)) != 0; | |
182 | info->is_fahrenheit = (buf[4 + 0] & (1 << 6)) != 0; | |
183 | info->is_celsius = (buf[4 + 0] & (1 << 5)) != 0; | |
184 | info->is_diode = (buf[4 + 0] & (1 << 4)) != 0; | |
185 | info->is_capacitance = (buf[4 + 0] & (1 << 3)) != 0; | |
186 | info->is_volt = (buf[4 + 0] & (1 << 2)) != 0; | |
187 | info->is_dc = (buf[4 + 0] & (1 << 1)) != 0; | |
188 | info->is_ac = (buf[4 + 0] & (1 << 0)) != 0; | |
601fb67c AG |
189 | } |
190 | ||
191 | SR_PRIV int sr_brymen_parse(const uint8_t *buf, float *floatval, | |
192 | struct sr_datafeed_analog *analog, void *info) | |
193 | { | |
194 | struct brymen_flags flags; | |
c5d6f5cc UH |
195 | struct brymen_header *hdr; |
196 | uint8_t *bfunc; | |
601fb67c AG |
197 | int asciilen; |
198 | ||
199 | (void)info; | |
c5d6f5cc UH |
200 | |
201 | hdr = (void *)buf; | |
202 | bfunc = (uint8_t *)(buf + sizeof(struct brymen_header)); | |
203 | ||
601fb67c AG |
204 | analog->mqflags = 0; |
205 | ||
c5d6f5cc | 206 | /* Give some debug info about the package. */ |
601fb67c AG |
207 | asciilen = hdr->len - 4; |
208 | sr_dbg("DMM flags: %.2x %.2x %.2x %.2x", | |
209 | bfunc[3], bfunc[2], bfunc[1], bfunc[0]); | |
c5d6f5cc | 210 | /* Value is an ASCII string. */ |
601fb67c AG |
211 | sr_dbg("DMM packet: \"%.*s\"", asciilen, bfunc + 4); |
212 | ||
213 | parse_flags(buf, &flags); | |
c5d6f5cc | 214 | parse_value((const char *)(bfunc + 4), asciilen, floatval); |
601fb67c | 215 | |
c5d6f5cc | 216 | if (flags.is_volt) { |
601fb67c AG |
217 | analog->mq = SR_MQ_VOLTAGE; |
218 | analog->unit = SR_UNIT_VOLT; | |
219 | } | |
c5d6f5cc | 220 | if (flags.is_amp) { |
601fb67c AG |
221 | analog->mq = SR_MQ_CURRENT; |
222 | analog->unit = SR_UNIT_AMPERE; | |
223 | } | |
c5d6f5cc UH |
224 | if (flags.is_ohm) { |
225 | if (flags.is_beep) | |
601fb67c AG |
226 | analog->mq = SR_MQ_CONTINUITY; |
227 | else | |
228 | analog->mq = SR_MQ_RESISTANCE; | |
229 | analog->unit = SR_UNIT_OHM; | |
230 | } | |
c5d6f5cc | 231 | if (flags.is_hertz) { |
601fb67c AG |
232 | analog->mq = SR_MQ_FREQUENCY; |
233 | analog->unit = SR_UNIT_HERTZ; | |
234 | } | |
c5d6f5cc | 235 | if (flags.is_duty_cycle) { |
601fb67c AG |
236 | analog->mq = SR_MQ_DUTY_CYCLE; |
237 | analog->unit = SR_UNIT_PERCENTAGE; | |
238 | } | |
c5d6f5cc | 239 | if (flags.is_capacitance) { |
601fb67c AG |
240 | analog->mq = SR_MQ_CAPACITANCE; |
241 | analog->unit = SR_UNIT_FARAD; | |
242 | } | |
c5d6f5cc | 243 | if (flags.is_fahrenheit) { |
601fb67c AG |
244 | analog->mq = SR_MQ_TEMPERATURE; |
245 | analog->unit = SR_UNIT_FAHRENHEIT; | |
246 | } | |
c5d6f5cc | 247 | if (flags.is_celsius) { |
601fb67c AG |
248 | analog->mq = SR_MQ_TEMPERATURE; |
249 | analog->unit = SR_UNIT_CELSIUS; | |
250 | } | |
c5d6f5cc | 251 | if (flags.is_capacitance) { |
601fb67c AG |
252 | analog->mq = SR_MQ_CAPACITANCE; |
253 | analog->unit = SR_UNIT_FARAD; | |
254 | } | |
c5d6f5cc | 255 | |
601fb67c | 256 | /* |
c5d6f5cc | 257 | * The high-end Brymen models have a configurable reference impedance. |
601fb67c AG |
258 | * When the reference impedance is changed, the DMM sends one packet |
259 | * with the value of the new reference impedance. Both decibel and ohm | |
260 | * flags are set in this case, so we must be careful to correctly | |
c5d6f5cc | 261 | * identify the value as ohm, not dBmW. |
601fb67c | 262 | */ |
c5d6f5cc | 263 | if (flags.is_decibel && !flags.is_ohm) { |
601fb67c AG |
264 | analog->mq = SR_MQ_POWER; |
265 | analog->unit = SR_UNIT_DECIBEL_MW; | |
266 | /* | |
267 | * For some reason, dBm measurements are sent by the multimeter | |
268 | * with a value three orders of magnitude smaller than the | |
269 | * displayed value. | |
c5d6f5cc | 270 | */ |
601fb67c AG |
271 | *floatval *= 1000; |
272 | } | |
273 | ||
c5d6f5cc | 274 | if (flags.is_diode) |
601fb67c | 275 | analog->mqflags |= SR_MQFLAG_DIODE; |
c5d6f5cc UH |
276 | /* We can have both AC+DC in a single measurement. */ |
277 | if (flags.is_ac) | |
601fb67c | 278 | analog->mqflags |= SR_MQFLAG_AC; |
c5d6f5cc | 279 | if (flags.is_dc) |
601fb67c AG |
280 | analog->mqflags |= SR_MQFLAG_DC; |
281 | ||
c5d6f5cc | 282 | if (flags.is_low_batt) |
601fb67c AG |
283 | sr_info("Low battery!"); |
284 | ||
285 | return SR_OK; | |
c5d6f5cc | 286 | } |