]>
Commit | Line | Data |
---|---|---|
d4026957 | 1 | ## |
2 | ## This file is part of the libsigrokdecode project. | |
3 | ## | |
4 | ## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | ## Copyright (C) 2013 Matt Ranostay <mranostay@gmail.com> | |
6 | ## Copyright (C) 2014 alberink <alberink@stampfini.org> | |
7 | ## | |
8 | ## This program is free software; you can redistribute it and/or modify | |
9 | ## it under the terms of the GNU General Public License as published by | |
10 | ## the Free Software Foundation; either version 2 of the License, or | |
11 | ## (at your option) any later version. | |
12 | ## | |
13 | ## This program is distributed in the hope that it will be useful, | |
14 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | ## GNU General Public License for more details. | |
17 | ## | |
18 | ## You should have received a copy of the GNU General Public License | |
4539e9ca | 19 | ## along with this program; if not, see <http://www.gnu.org/licenses/>. |
d4026957 | 20 | ## |
21 | ||
22 | import sigrokdecode as srd | |
23 | ||
24 | class Decoder(srd.Decoder): | |
b197383c | 25 | api_version = 3 |
d4026957 | 26 | id = 'tca6408a' |
98c47d11 UH |
27 | name = 'TI TCA6408A' |
28 | longname = 'Texas Instruments TCA6408A' | |
d4026957 | 29 | desc = 'Texas Instruments TCA6408A 8-bit I²C I/O expander.' |
30 | license = 'gplv2+' | |
31 | inputs = ['i2c'] | |
32 | outputs = ['tca6408a'] | |
33 | annotations = ( | |
34 | ('register', 'Register type'), | |
35 | ('value', 'Register value'), | |
36 | ('warnings', 'Warning messages'), | |
37 | ) | |
38 | annotation_rows = ( | |
39 | ('regs', 'Registers', (0, 1)), | |
40 | ('warnings', 'Warnings', (2,)), | |
41 | ) | |
42 | ||
92b7b49f | 43 | def __init__(self): |
d4026957 | 44 | self.state = 'IDLE' |
45 | self.chip = -1 | |
46 | ||
47 | def start(self): | |
48 | self.out_ann = self.register(srd.OUTPUT_ANN) | |
49 | ||
50 | def putx(self, data): | |
51 | self.put(self.ss, self.es, self.out_ann, data) | |
52 | ||
53 | def handle_reg_0x00(self, b): | |
54 | self.putx([1, ['State of inputs: %02X' % b]]) | |
55 | ||
56 | def handle_reg_0x01(self, b): | |
57 | self.putx([1, ['Outputs set: %02X' % b ]]) | |
58 | ||
59 | def handle_reg_0x02(self, b): | |
60 | self.putx([1, ['Polarity inverted: %02X' % b]]) | |
61 | ||
62 | def handle_reg_0x03(self, b): | |
63 | self.putx([1, ['Configuration: %02X' % b]]) | |
64 | ||
65 | def handle_write_reg(self, b): | |
66 | if b == 0: | |
67 | self.putx([0, ['Input port', 'In', 'I']]) | |
68 | elif b == 1: | |
69 | self.putx([0, ['Output port', 'Out', 'O']]) | |
70 | elif b == 2: | |
71 | self.putx([0, ['Polarity inversion register', 'Pol', 'P']]) | |
72 | elif b == 3: | |
73 | self.putx([0, ['Configuration register', 'Conf', 'C']]) | |
74 | ||
75 | def check_correct_chip(self, addr): | |
76 | if addr not in (0x20, 0x21): | |
77 | self.putx([2, ['Warning: I²C slave 0x%02X not a TCA6408A ' | |
78 | 'compatible chip.' % addr]]) | |
79 | self.state = 'IDLE' | |
80 | ||
81 | def decode(self, ss, es, data): | |
82 | cmd, databyte = data | |
83 | ||
84 | # Store the start/end samples of this I²C packet. | |
85 | self.ss, self.es = ss, es | |
86 | ||
87 | # State machine. | |
88 | if self.state == 'IDLE': | |
89 | # Wait for an I²C START condition. | |
90 | if cmd != 'START': | |
91 | return | |
92 | self.state = 'GET SLAVE ADDR' | |
d4026957 | 93 | elif self.state == 'GET SLAVE ADDR': |
18101a31 | 94 | self.chip = databyte |
d4026957 | 95 | self.state = 'GET REG ADDR' |
96 | elif self.state == 'GET REG ADDR': | |
97 | # Wait for a data write (master selects the slave register). | |
98 | if cmd in ('ADDRESS READ', 'ADDRESS WRITE'): | |
99 | self.check_correct_chip(databyte) | |
100 | if cmd != 'DATA WRITE': | |
101 | return | |
102 | self.reg = databyte | |
103 | self.handle_write_reg(self.reg) | |
104 | self.state = 'WRITE IO REGS' | |
105 | elif self.state == 'WRITE IO REGS': | |
106 | # If we see a Repeated Start here, the master wants to read. | |
107 | if cmd == 'START REPEAT': | |
108 | self.state = 'READ IO REGS' | |
109 | return | |
110 | # Otherwise: Get data bytes until a STOP condition occurs. | |
111 | if cmd == 'DATA WRITE': | |
112 | handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg) | |
113 | handle_reg(databyte) | |
114 | elif cmd == 'STOP': | |
115 | self.state = 'IDLE' | |
116 | self.chip = -1 | |
117 | elif self.state == 'READ IO REGS': | |
118 | # Wait for an address read operation. | |
119 | if cmd == 'ADDRESS READ': | |
120 | self.state = 'READ IO REGS2' | |
121 | self.chip = databyte | |
122 | return | |
123 | elif self.state == 'READ IO REGS2': | |
124 | if cmd == 'DATA READ': | |
125 | handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg) | |
126 | handle_reg(databyte) | |
127 | elif cmd == 'STOP': | |
128 | self.state = 'IDLE' |