]>
Commit | Line | Data |
---|---|---|
63642c0b S |
1 | ## |
2 | ## This file is part of the libsigrokdecode project. | |
3 | ## | |
4 | ## Copyright (C) 2018 Steve R <steversig@virginmedia.com> | |
5 | ## | |
6 | ## This program is free software; you can redistribute it and/or modify | |
7 | ## it under the terms of the GNU General Public License as published by | |
8 | ## the Free Software Foundation; either version 2 of the License, or | |
9 | ## (at your option) any later version. | |
10 | ## | |
11 | ## This program is distributed in the hope that it will be useful, | |
12 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | ## GNU General Public License for more details. | |
15 | ## | |
16 | ## You should have received a copy of the GNU General Public License | |
17 | ## along with this program; if not, see <http://www.gnu.org/licenses/>. | |
18 | ## | |
19 | ||
20 | # Most of the info here comes from "434MHz RF Protocol Descriptions for | |
21 | # Wireless Weather Sensors - October 2015" Known Sensor ID Codes - p25. | |
22 | ||
23 | # Format is 4 hex digit ID code followed by a LIST of models that use that | |
24 | # ID and the type of sensor. | |
25 | # SensorID is used as the hash in a Python hash table, so it must be upper case. | |
26 | # The type of sensor is used to decode and display readings in the L2 decode, | |
27 | # it's case-sensitive. | |
28 | # Be very careful with the formatting ' [] and commas. | |
29 | ||
30 | sensor = { | |
31 | # 'SensorID': [['model1', 'model2'], 'type'], | |
32 | '1984': [['WGR800'], 'Wind'], # The newer anemometer with no temperature/RH sensor. | |
33 | '1994': [['WGR800'], 'Wind'], # The original anemometer which included a temperature/RH sensor. | |
34 | '1A2D': [['THGR228N'], 'Temp_Hum1'], | |
35 | '1A3D': [['THGR918'], ''], | |
36 | '1D20': [['THGN123N', 'THGR122NX', 'THGN123N', 'THGR228N'], 'Temp_Hum'], | |
37 | '1D30': [['THGN500', 'THGN132N'], ''], | |
38 | '2914': [['PCR800'], 'Rain'], | |
39 | '2A19': [['PCR800'], 'Rain1'], | |
40 | '2A1D': [['RGR918'], 'Rain'], | |
41 | '2D10': [['RGR968', 'PGR968 '], 'Rain1'], | |
42 | '3A0D': [['STR918', 'WGR918'], 'Wind'], | |
43 | '5A5D': [['BTHR918'], ''], | |
44 | '5A6D': [['BTHR918N'], 'Temp_Hum_Baro'], | |
45 | '5D53': [['BTHGN129'], 'Baro'], | |
46 | '5D60': [['BTHR968'], 'Temp_Hum_Baro'], | |
47 | 'C844': [['THWR800'], 'Temp'], | |
48 | 'CC13': [['RTGR328N'], 'Temp_Hum'], | |
49 | 'CC23': [['THGR328N'], 'Temp_Hum'], | |
50 | 'CD39': [['RTHR328N'], 'Temp'], | |
51 | 'D874': [['UVN800'], 'UV1'], | |
52 | 'EA4C': [['THWR288A'], 'Temp'], | |
53 | 'EC40': [['THN132N', 'THR238NF'], 'Temp'], | |
54 | 'EC70': [['UVR128'], 'UV'], | |
55 | 'F824': [['THGN800', 'THGN801', 'THGR810'], 'Temp_Hum'], | |
56 | 'F8B4': [['THGR810'], 'Temp_Hum'], | |
57 | # '': ['PSR01'], '', ''], | |
58 | # '': ['RTGR328NA'], '', ''], | |
59 | # '': ['THC268'], '', ''], | |
60 | # '': ['THWR288A-JD'], '', ''], | |
61 | # '': ['THGR268'], '', ''], | |
62 | # '': ['THR268'], '', ''], | |
63 | } | |
64 | ||
65 | # The sensor checksum exceptions are used to calculate the right checksum for | |
66 | # sensors that don't follow the v1, v2.1 and v3 methods. For instance a v2.1 | |
67 | # sensor that has a v3 checksum. | |
68 | sensor_checksum = { | |
69 | # 'SensorID': ['checksum_method', 'comment'], | |
70 | '1D20': ['v3', 'THGR228N'], | |
71 | '5D60': ['v3', 'BTHR918N'], | |
72 | 'EC40': ['v3', 'THN132N'], | |
73 | } | |
74 | ||
75 | dir_table = ['N', 'NNE', 'NE', 'ENE', 'E', 'ESE', 'SE', 'SSE', 'S', 'SSW', 'SW', 'WSW', 'W', 'WNW', 'NW', 'NNW', 'N'] |