]>
Commit | Line | Data |
---|---|---|
9cfb16e8 | 1 | ## |
50bd5d25 | 2 | ## This file is part of the libsigrokdecode project. |
9cfb16e8 IJ |
3 | ## |
4 | ## Copyright (C) 2012 Iztok Jeras <iztok.jeras@gmail.com> | |
5 | ## | |
6 | ## This program is free software; you can redistribute it and/or modify | |
7 | ## it under the terms of the GNU General Public License as published by | |
8 | ## the Free Software Foundation; either version 2 of the License, or | |
9 | ## (at your option) any later version. | |
10 | ## | |
11 | ## This program is distributed in the hope that it will be useful, | |
12 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | ## GNU General Public License for more details. | |
15 | ## | |
16 | ## You should have received a copy of the GNU General Public License | |
17 | ## along with this program; if not, write to the Free Software | |
18 | ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | ## | |
20 | ||
9cfb16e8 IJ |
21 | import sigrokdecode as srd |
22 | ||
21cda951 UH |
23 | class SamplerateError(Exception): |
24 | pass | |
25 | ||
9cfb16e8 | 26 | class Decoder(srd.Decoder): |
12851357 | 27 | api_version = 2 |
9cfb16e8 IJ |
28 | id = 'onewire_link' |
29 | name = '1-Wire link layer' | |
e7720d6c | 30 | longname = '1-Wire serial communication bus (link layer)' |
9cfb16e8 IJ |
31 | desc = 'Bidirectional, half-duplex, asynchronous serial bus.' |
32 | license = 'gplv2+' | |
33 | inputs = ['logic'] | |
34 | outputs = ['onewire_link'] | |
6a15597a | 35 | channels = ( |
3f302d51 | 36 | {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire signal line'}, |
da9bcbd9 | 37 | ) |
6a15597a | 38 | optional_channels = ( |
3f302d51 | 39 | {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power supply pin'}, |
da9bcbd9 | 40 | ) |
84c1c0b5 BV |
41 | options = ( |
42 | {'id': 'overdrive', | |
b0918d40 | 43 | 'desc': 'Overdrive mode', 'default': 'no', 'values': ('yes', 'no')}, |
497f196d | 44 | # Time options (specified in microseconds): |
84c1c0b5 | 45 | {'id': 'cnt_normal_bit', |
b0918d40 | 46 | 'desc': 'Normal mode sample bit time (μs)', 'default': 15}, |
84c1c0b5 | 47 | {'id': 'cnt_normal_slot', |
b0918d40 | 48 | 'desc': 'Normal mode data slot time (μs)', 'default': 60}, |
84c1c0b5 | 49 | {'id': 'cnt_normal_presence', |
b0918d40 | 50 | 'desc': 'Normal mode sample presence time (μs)', 'default': 75}, |
84c1c0b5 | 51 | {'id': 'cnt_normal_reset', |
b0918d40 | 52 | 'desc': 'Normal mode reset time (μs)', 'default': 480}, |
84c1c0b5 | 53 | {'id': 'cnt_overdrive_bit', |
b0918d40 | 54 | 'desc': 'Overdrive mode sample bit time (μs)', 'default': 2}, |
84c1c0b5 | 55 | {'id': 'cnt_overdrive_slot', |
b0918d40 | 56 | 'desc': 'Overdrive mode data slot time (μs)', 'default': 7.3}, |
84c1c0b5 | 57 | {'id': 'cnt_overdrive_presence', |
b0918d40 | 58 | 'desc': 'Overdrive mode sample presence time (μs)', 'default': 10}, |
84c1c0b5 | 59 | {'id': 'cnt_overdrive_reset', |
b0918d40 | 60 | 'desc': 'Overdrive mode reset time (μs)', 'default': 48}, |
84c1c0b5 | 61 | ) |
da9bcbd9 BV |
62 | annotations = ( |
63 | ('bit', 'Bit'), | |
64 | ('warnings', 'Warnings'), | |
65 | ('reset', 'Reset'), | |
66 | ('presence', 'Presence'), | |
67 | ('overdrive', 'Overdrive mode notifications'), | |
68 | ) | |
8e11415b UH |
69 | annotation_rows = ( |
70 | ('bits', 'Bits', (0, 2, 3)), | |
71 | ('info', 'Info', (4,)), | |
72 | ('warnings', 'Warnings', (1,)), | |
73 | ) | |
9cfb16e8 | 74 | |
ddeb9b32 UH |
75 | def putm(self, data): |
76 | self.put(0, 0, self.out_ann, data) | |
77 | ||
78 | def putpb(self, data): | |
c515eed7 | 79 | self.put(self.fall, self.samplenum, self.out_python, data) |
ddeb9b32 UH |
80 | |
81 | def putb(self, data): | |
82 | self.put(self.fall, self.samplenum, self.out_ann, data) | |
83 | ||
84 | def putx(self, data): | |
85 | self.put(self.fall, self.cnt_bit[self.overdrive], self.out_ann, data) | |
86 | ||
6f507573 UH |
87 | def putfr(self, data): |
88 | self.put(self.fall, self.rise, self.out_ann, data) | |
89 | ||
90 | def putprs(self, data): | |
c515eed7 | 91 | self.put(self.rise, self.samplenum, self.out_python, data) |
6f507573 UH |
92 | |
93 | def putrs(self, data): | |
94 | self.put(self.rise, self.samplenum, self.out_ann, data) | |
95 | ||
92b7b49f | 96 | def __init__(self): |
f372d597 | 97 | self.samplerate = None |
9cfb16e8 | 98 | self.samplenum = 0 |
e7720d6c | 99 | self.state = 'WAIT FOR FALLING EDGE' |
9cfb16e8 | 100 | self.present = 0 |
e7720d6c | 101 | self.bit = 0 |
99f5f3b5 IJ |
102 | self.bit_cnt = 0 |
103 | self.command = 0 | |
9cfb16e8 | 104 | self.overdrive = 0 |
e7720d6c UH |
105 | self.fall = 0 |
106 | self.rise = 0 | |
9cfb16e8 | 107 | |
f372d597 | 108 | def start(self): |
c515eed7 | 109 | self.out_python = self.register(srd.OUTPUT_PYTHON) |
be465111 | 110 | self.out_ann = self.register(srd.OUTPUT_ANN) |
9cfb16e8 | 111 | |
3085037b | 112 | def checks(self): |
e7720d6c | 113 | # Check if samplerate is appropriate. |
01520fa9 | 114 | if self.options['overdrive'] == 'yes': |
e7720d6c | 115 | if self.samplerate < 2000000: |
ddeb9b32 UH |
116 | self.putm([1, ['Sampling rate is too low. Must be above ' + |
117 | '2MHz for proper overdrive mode decoding.']]) | |
e7720d6c | 118 | elif self.samplerate < 5000000: |
ddeb9b32 UH |
119 | self.putm([1, ['Sampling rate is suggested to be above 5MHz ' + |
120 | 'for proper overdrive mode decoding.']]) | |
9cfb16e8 | 121 | else: |
e7720d6c | 122 | if self.samplerate < 400000: |
ddeb9b32 UH |
123 | self.putm([1, ['Sampling rate is too low. Must be above ' + |
124 | '400kHz for proper normal mode decoding.']]) | |
3085037b | 125 | elif self.samplerate < 1000000: |
ddeb9b32 UH |
126 | self.putm([1, ['Sampling rate is suggested to be above ' + |
127 | '1MHz for proper normal mode decoding.']]) | |
9cfb16e8 | 128 | |
e7720d6c UH |
129 | # Check if sample times are in the allowed range. |
130 | ||
131 | time_min = float(self.cnt_normal_bit) / self.samplerate | |
132 | time_max = float(self.cnt_normal_bit + 1) / self.samplerate | |
133 | if (time_min < 0.000005) or (time_max > 0.000015): | |
ddeb9b32 | 134 | self.putm([1, ['The normal mode data sample time interval ' + |
e7720d6c UH |
135 | '(%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' |
136 | % (time_min * 1000000, time_max * 1000000)]]) | |
137 | ||
138 | time_min = float(self.cnt_normal_presence) / self.samplerate | |
139 | time_max = float(self.cnt_normal_presence + 1) / self.samplerate | |
140 | if (time_min < 0.0000681) or (time_max > 0.000075): | |
ddeb9b32 | 141 | self.putm([1, ['The normal mode presence sample time interval ' + |
e7720d6c UH |
142 | '(%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' |
143 | % (time_min * 1000000, time_max * 1000000)]]) | |
144 | ||
145 | time_min = float(self.cnt_overdrive_bit) / self.samplerate | |
146 | time_max = float(self.cnt_overdrive_bit + 1) / self.samplerate | |
147 | if (time_min < 0.000001) or (time_max > 0.000002): | |
ddeb9b32 | 148 | self.putm([1, ['The overdrive mode data sample time interval ' + |
e7720d6c UH |
149 | '(%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' |
150 | % (time_min * 1000000, time_max * 1000000)]]) | |
151 | ||
152 | time_min = float(self.cnt_overdrive_presence) / self.samplerate | |
153 | time_max = float(self.cnt_overdrive_presence + 1) / self.samplerate | |
154 | if (time_min < 0.0000073) or (time_max > 0.000010): | |
ddeb9b32 | 155 | self.putm([1, ['The overdrive mode presence sample time interval ' + |
e7720d6c | 156 | '(%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' |
35b380b1 | 157 | % (time_min * 1000000, time_max * 1000000)]]) |
9cfb16e8 | 158 | |
3085037b UH |
159 | |
160 | def metadata(self, key, value): | |
161 | if key != srd.SRD_CONF_SAMPLERATE: | |
162 | return | |
163 | self.samplerate = value | |
164 | ||
165 | # The default 1-Wire time base is 30us. This is used to calculate | |
166 | # sampling times. | |
167 | samplerate = float(self.samplerate) | |
168 | ||
169 | x = float(self.options['cnt_normal_bit']) / 1000000.0 | |
170 | self.cnt_normal_bit = int(samplerate * x) - 1 | |
171 | x = float(self.options['cnt_normal_slot']) / 1000000.0 | |
172 | self.cnt_normal_slot = int(samplerate * x) - 1 | |
173 | x = float(self.options['cnt_normal_presence']) / 1000000.0 | |
174 | self.cnt_normal_presence = int(samplerate * x) - 1 | |
175 | x = float(self.options['cnt_normal_reset']) / 1000000.0 | |
176 | self.cnt_normal_reset = int(samplerate * x) - 1 | |
177 | x = float(self.options['cnt_overdrive_bit']) / 1000000.0 | |
178 | self.cnt_overdrive_bit = int(samplerate * x) - 1 | |
179 | x = float(self.options['cnt_overdrive_slot']) / 1000000.0 | |
180 | self.cnt_overdrive_slot = int(samplerate * x) - 1 | |
181 | x = float(self.options['cnt_overdrive_presence']) / 1000000.0 | |
182 | self.cnt_overdrive_presence = int(samplerate * x) - 1 | |
183 | x = float(self.options['cnt_overdrive_reset']) / 1000000.0 | |
184 | self.cnt_overdrive_reset = int(samplerate * x) - 1 | |
185 | ||
186 | # Organize values into lists. | |
187 | self.cnt_bit = [self.cnt_normal_bit, self.cnt_overdrive_bit] | |
188 | self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence] | |
189 | self.cnt_reset = [self.cnt_normal_reset, self.cnt_overdrive_reset] | |
190 | self.cnt_slot = [self.cnt_normal_slot, self.cnt_overdrive_slot] | |
191 | ||
9cfb16e8 | 192 | def decode(self, ss, es, data): |
21cda951 UH |
193 | if not self.samplerate: |
194 | raise SamplerateError('Cannot decode without samplerate.') | |
9cfb16e8 | 195 | for (self.samplenum, (owr, pwr)) in data: |
3085037b UH |
196 | if self.samplenum == 0: |
197 | self.checks() | |
9cfb16e8 IJ |
198 | # State machine. |
199 | if self.state == 'WAIT FOR FALLING EDGE': | |
200 | # The start of a cycle is a falling edge. | |
48b59746 UH |
201 | if owr != 0: |
202 | continue | |
203 | # Save the sample number for the falling edge. | |
204 | self.fall = self.samplenum | |
205 | # Go to waiting for sample time. | |
206 | self.state = 'WAIT FOR DATA SAMPLE' | |
9cfb16e8 | 207 | elif self.state == 'WAIT FOR DATA SAMPLE': |
e7720d6c UH |
208 | # Sample data bit. |
209 | t = self.samplenum - self.fall | |
210 | if t == self.cnt_bit[self.overdrive]: | |
211 | self.bit = owr | |
671cc300 IJ |
212 | self.state = 'WAIT FOR DATA SLOT END' |
213 | elif self.state == 'WAIT FOR DATA SLOT END': | |
e7720d6c UH |
214 | # A data slot ends in a recovery period, otherwise, this is |
215 | # probably a reset. | |
216 | t = self.samplenum - self.fall | |
48b59746 UH |
217 | if t != self.cnt_slot[self.overdrive]: |
218 | continue | |
219 | ||
220 | if owr == 0: | |
221 | # This seems to be a reset slot, wait for its end. | |
222 | self.state = 'WAIT FOR RISING EDGE' | |
223 | continue | |
224 | ||
4e980c20 | 225 | self.putb([0, ['Bit: %d' % self.bit, '%d' % self.bit]]) |
ddeb9b32 | 226 | self.putpb(['BIT', self.bit]) |
e7720d6c | 227 | |
48b59746 UH |
228 | # Checking the first command to see if overdrive mode |
229 | # should be entered. | |
230 | if self.bit_cnt <= 8: | |
231 | self.command |= (self.bit << self.bit_cnt) | |
232 | elif self.bit_cnt == 8 and self.command in [0x3c, 0x69]: | |
4e980c20 | 233 | self.putx([4, ['Entering overdrive mode', 'Overdrive on']]) |
48b59746 UH |
234 | # Increment the bit counter. |
235 | self.bit_cnt += 1 | |
236 | # Wait for next slot. | |
237 | self.state = 'WAIT FOR FALLING EDGE' | |
9cfb16e8 IJ |
238 | elif self.state == 'WAIT FOR RISING EDGE': |
239 | # The end of a cycle is a rising edge. | |
48b59746 UH |
240 | if owr != 1: |
241 | continue | |
242 | ||
243 | # Check if this was a reset cycle. | |
244 | t = self.samplenum - self.fall | |
245 | if t > self.cnt_normal_reset: | |
015dc33a | 246 | # Save the sample number for the rising edge. |
48b59746 | 247 | self.rise = self.samplenum |
4e980c20 | 248 | self.putfr([2, ['Reset', 'Rst', 'R']]) |
48b59746 UH |
249 | self.state = 'WAIT FOR PRESENCE DETECT' |
250 | # Exit overdrive mode. | |
251 | if self.overdrive: | |
4e980c20 | 252 | self.putx([4, ['Exiting overdrive mode', 'Overdrive off']]) |
48b59746 UH |
253 | self.overdrive = 0 |
254 | # Clear command bit counter and data register. | |
255 | self.bit_cnt = 0 | |
256 | self.command = 0 | |
257 | elif (t > self.cnt_overdrive_reset) and self.overdrive: | |
015dc33a | 258 | # Save the sample number for the rising edge. |
48b59746 | 259 | self.rise = self.samplenum |
4e980c20 | 260 | self.putfr([2, ['Reset', 'Rst', 'R']]) |
21b39043 | 261 | self.state = 'WAIT FOR PRESENCE DETECT' |
48b59746 UH |
262 | # Otherwise this is assumed to be a data bit. |
263 | else: | |
21b39043 | 264 | self.state = 'WAIT FOR FALLING EDGE' |
9cfb16e8 | 265 | elif self.state == 'WAIT FOR PRESENCE DETECT': |
e7720d6c UH |
266 | # Sample presence status. |
267 | t = self.samplenum - self.rise | |
268 | if t == self.cnt_presence[self.overdrive]: | |
671cc300 IJ |
269 | self.present = owr |
270 | self.state = 'WAIT FOR RESET SLOT END' | |
271 | elif self.state == 'WAIT FOR RESET SLOT END': | |
48b59746 | 272 | # A reset slot ends in a long recovery period. |
e7720d6c | 273 | t = self.samplenum - self.rise |
48b59746 UH |
274 | if t != self.cnt_reset[self.overdrive]: |
275 | continue | |
276 | ||
277 | if owr == 0: | |
278 | # This seems to be a reset slot, wait for its end. | |
279 | self.state = 'WAIT FOR RISING EDGE' | |
280 | continue | |
281 | ||
ddeb9b32 | 282 | p = 'false' if self.present else 'true' |
4e980c20 | 283 | self.putrs([3, ['Presence: %s' % p, 'Presence', 'Pres', 'P']]) |
6f507573 | 284 | self.putprs(['RESET/PRESENCE', not self.present]) |
ddeb9b32 | 285 | |
48b59746 UH |
286 | # Wait for next slot. |
287 | self.state = 'WAIT FOR FALLING EDGE' |