Difference between revisions of "Linux"
Jump to navigation
Jump to search
m (add: hint ( sudo ldconfig /usr/local/lib/ )) |
Uwe Hermann (talk | contribs) (Mention libudev, small fixes.) |
||
| Line 13: | Line 13: | ||
* [http://www.intra2net.com/en/developer/libftdi/ libftdi] (optional, only required for some devices) | * [http://www.intra2net.com/en/developer/libftdi/ libftdi] (optional, only required for some devices) | ||
<!-- * [http://www.intra2net.com/en/developer/libftdi/ libftdi] >= 0.17 (optional, only required for some devices) --> | <!-- * [http://www.intra2net.com/en/developer/libftdi/ libftdi] >= 0.17 (optional, only required for some devices) --> | ||
* [http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/ libudev] >= 151 (optional, only required for some devices) | |||
* [http://www.python.org Python] >= 2.5 (optional, only required for protocol decoders) | * [http://www.python.org Python] >= 2.5 (optional, only required for protocol decoders) | ||
* [http://qt.nokia.com Qt + Qt Creator] >= 4.5 (optional, only required for building/editing the GUI) | * [http://qt.nokia.com Qt + Qt Creator] >= 4.5 (optional, only required for building/editing the GUI) | ||
| Line 23: | Line 24: | ||
$ '''sudo apt-get install git-core gcc g++ make autoconf automake libtool pkg-config \''' | $ '''sudo apt-get install git-core gcc g++ make autoconf automake libtool pkg-config \''' | ||
'''libglib2.0-dev libftdi-dev libusb-1.0-0-dev libzip-dev python-dev qtcreator qt4-designer qt4-dev-tools libqt4-dev''' | '''libglib2.0-dev libftdi-dev libudev-dev libusb-1.0-0-dev libzip-dev python-dev qtcreator qt4-designer qt4-dev-tools libqt4-dev''' | ||
Fedora: | Fedora: | ||
| Line 38: | Line 39: | ||
$ '''sudo make install''' | $ '''sudo make install''' | ||
Then, for building the GUI: | Then, for building the [[GUI]] ('''Note:''' The GUI is not yet usable!): | ||
$ '''cd gui''' | $ '''cd gui''' | ||
| Line 44: | Line 45: | ||
$ '''make''' | $ '''make''' | ||
If you get warnings claiming potential symbol conflicts when running qmake, you are likely invoking | If you get warnings claiming potential symbol conflicts when running qmake, you are likely invoking '''qmake-qt4'''. Try running '''qmake-qt4''' to force the correct version. | ||
== Pitfalls == | == Pitfalls == | ||
If you get this error: | If you get this error: | ||
sigrok-cli: error while loading shared libraries: libsigrok.so.0: cannot open shared object file: No such file or directory | sigrok-cli: error while loading shared libraries: libsigrok.so.0: cannot open shared object file: No such file or directory | ||
Then you have to rebuild the links to your shared libraries: | Then you have to rebuild the links to your shared libraries: | ||
$ '''sudo ldconfig /usr/local/lib | |||
$ '''sudo ldconfig /usr/local/lib''' | |||
== Test it == | == Test it == | ||
$ '''sigrok-cli - | |||
Scan for devices: | |||
$ '''sigrok-cli -D''' | |||
The following devices were found: | |||
ID Device | |||
0 Zeroplus Logic Cube with 32 probes | |||
demo Demo device with 8 probes | |||
$''' sigrok-cli - | |||
Get 10 samples from device 0 (Zeroplus Logic Cube in this example): | |||
$ '''sigrok-cli -d 0 --samples 10''' | |||
See [[Command-line]] for further usage. | See [[Command-line]] for further usage. | ||
== Distribution packages == | == Distribution packages == | ||
Revision as of 18:57, 16 January 2011
This page describes how to build sigrok on Linux.
Requirements
- git (for cloning the source code repository)
- gcc, g++, make, ...
- autoconf, automake, libtool, pkg-config
- libglib >= 2.0
- libusb >= 1.0.5
- libzip >= 0.8
- libftdi (optional, only required for some devices)
- libudev >= 151 (optional, only required for some devices)
- Python >= 2.5 (optional, only required for protocol decoders)
- Qt + Qt Creator >= 4.5 (optional, only required for building/editing the GUI)
Installing the build-dependencies
On most Linux distributions there are pre-built packages for the sigrok dependencies (if not, you have to build the packages from source). The installation using a package manager is usually pretty simple.
Debian/Ubuntu:
$ sudo apt-get install git-core gcc g++ make autoconf automake libtool pkg-config \ libglib2.0-dev libftdi-dev libudev-dev libusb-1.0-0-dev libzip-dev python-dev qtcreator qt4-designer qt4-dev-tools libqt4-dev
Fedora:
$ yum install gcc-c++ libtool glib2-devel libftdi-devel libusb1-devel libzip-devel qt-devel python-devel
Building
$ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok $ cd sigrok $ ./autogen.sh $ ./configure $ make $ sudo make install
Then, for building the GUI (Note: The GUI is not yet usable!):
$ cd gui $ qmake $ make
If you get warnings claiming potential symbol conflicts when running qmake, you are likely invoking qmake-qt4. Try running qmake-qt4 to force the correct version.
Pitfalls
If you get this error:
sigrok-cli: error while loading shared libraries: libsigrok.so.0: cannot open shared object file: No such file or directory
Then you have to rebuild the links to your shared libraries:
$ sudo ldconfig /usr/local/lib
Test it
Scan for devices:
$ sigrok-cli -D The following devices were found: ID Device 0 Zeroplus Logic Cube with 32 probes demo Demo device with 8 probes
Get 10 samples from device 0 (Zeroplus Logic Cube in this example):
$ sigrok-cli -d 0 --samples 10
See Command-line for further usage.
Distribution packages
- Debian / Ubuntu: Uwe Hermann will create packages for Debian unstable (which will semi-automatically migrate to Ubuntu after a while).
- Fedora: See Linux/Fedora.