Difference between revisions of "Saanlima Pipistrello OLS"
(Created page with "{{Infobox logic analyzer | image = 180px | name = Saanlima Pipistrello OLS | status = in progress | sour...") |
|||
| Line 18: | Line 18: | ||
The FPGA firmware for the OLS has been ported for the Pipistrello, and can thus use the full 64MiB memory to store samples. It also has triggers on rising/falling edges as an extra feature. | The FPGA firmware for the OLS has been ported for the Pipistrello, and can thus use the full 64MiB memory to store samples. It also has triggers on rising/falling edges as an extra feature. | ||
All design source for the Pipistrello, including schematics and Eagle board files, are available under the [https://creativecommons.org/licenses/by-sa/4.0/ CC-BY-SA 4.0] license. | |||
See [[Saanlima Pipistrello OLS/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | See [[Saanlima Pipistrello OLS/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | ||
| Line 37: | Line 39: | ||
[[Category:Logic analyzer]] | [[Category:Logic analyzer]] | ||
[[Category:In progress]] | [[Category:In progress]] | ||
[[Category:Open source hardware]] | |||
Revision as of 18:30, 23 August 2014
 | |
| Status | in progress |
|---|---|
| Source code | pipistrello-ols |
| Channels | 32 |
| Samplerate | 0-100MHz |
| Samplerate (state) | — |
| Triggers | value, rising/falling edge |
| Min/max voltage | 0V — 5V |
| Memory | 64MiB |
| Compression | yes |
| Website | pipistrello.saanlima.com |
The Saanlima Pipistrello is an FPGA development board with many on-board peripherals and pin headers compatible with the Papilio series of boards. It has USB connectivity to a host PC, and, by adding the Saanlima buffer wing, can be used as a replacement for the Openbench Logic Sniffer (OLS).
The FPGA firmware for the OLS has been ported for the Pipistrello, and can thus use the full 64MiB memory to store samples. It also has triggers on rising/falling edges as an extra feature.
All design source for the Pipistrello, including schematics and Eagle board files, are available under the CC-BY-SA 4.0 license.
See Saanlima Pipistrello OLS/Info for more details (such as lsusb -vvv output) about the device.
Hardware
Protocol
The protocol used is the same as the OLS protocol, with the addition of commands for edge triggers. See the source code for details.
Photos
Pipistrello board
Buffer wing
