--- /dev/null
+##
+## This file is part of the sigrok-meter project.
+##
+## Copyright (C) 2014 Jens Steinhauser <jens.steinhauser@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+import qtcompat
+import sigrok.core as sr
+
+QtCore = qtcompat.QtCore
+QtGui = qtcompat.QtGui
+
+class MeasurementDataModel(QtGui.QStandardItemModel):
+ '''Model to hold the measured values.'''
+
+ '''Role used to identify and find the item.'''
+ _idRole = QtCore.Qt.UserRole + 1
+
+ '''Role used to store the device vendor and model.'''
+ descRole = QtCore.Qt.UserRole + 2
+
+ def __init__(self, parent):
+ super(self.__class__, self).__init__(parent)
+
+ # Use the description text to sort the items for now, because the
+ # _idRole holds tuples, and using them to sort doesn't work.
+ self.setSortRole(MeasurementDataModel.descRole)
+
+ # Used in 'format_value()' to check against.
+ self.inf = float('inf')
+
+ def format_unit(self, u):
+ units = {
+ sr.Unit.VOLT: 'V',
+ sr.Unit.AMPERE: 'A',
+ sr.Unit.OHM: u'\u03A9',
+ sr.Unit.FARAD: 'F',
+ sr.Unit.KELVIN: 'K',
+ sr.Unit.CELSIUS: u'\u00B0C',
+ sr.Unit.FAHRENHEIT: u'\u00B0F',
+ sr.Unit.HERTZ: 'Hz',
+ sr.Unit.PERCENTAGE: '%',
+ # sr.Unit.BOOLEAN
+ sr.Unit.SECOND: 's',
+ sr.Unit.SIEMENS: 'S',
+ sr.Unit.DECIBEL_MW: 'dBu',
+ sr.Unit.DECIBEL_VOLT: 'dBV',
+ # sr.Unit.UNITLESS
+ sr.Unit.DECIBEL_SPL: 'dB',
+ # sr.Unit.CONCENTRATION
+ sr.Unit.REVOLUTIONS_PER_MINUTE: 'rpm',
+ sr.Unit.VOLT_AMPERE: 'VA',
+ sr.Unit.WATT: 'W',
+ sr.Unit.WATT_HOUR: 'Wh',
+ sr.Unit.METER_SECOND: 'm/s',
+ sr.Unit.HECTOPASCAL: 'hPa',
+ sr.Unit.HUMIDITY_293K: '%rF',
+ sr.Unit.DEGREE: u'\u00B0',
+ sr.Unit.HENRY: 'H'
+ }
+
+ return units.get(u, '')
+
+ def format_mqflags(self, mqflags):
+ if sr.QuantityFlag.AC in mqflags:
+ return 'AC'
+ elif sr.QuantityFlag.DC in mqflags:
+ return 'DC'
+ else:
+ return ''
+
+ def format_value(self, mag):
+ if mag == self.inf:
+ return u'\u221E'
+ return '{:f}'.format(mag)
+
+ def getItem(self, device, channel):
+ '''Returns the item for the device + channel combination from the model,
+ or creates a new item if no existing one matches.'''
+
+ # unique identifier for the device + channel
+ # TODO: isn't there something better?
+ uid = (
+ device.vendor,
+ device.model,
+ device.serial_number(),
+ device.connection_id(),
+ channel.index
+ )
+
+ # find the correct item in the model
+ for row in range(self.rowCount()):
+ item = self.item(row)
+ rid = item.data(MeasurementDataModel._idRole)
+ rid = tuple(rid) # PySide returns a list
+ if uid == rid:
+ return item
+
+ # nothing found, create a new item
+ desc = '{} {}, channel "{}"'.format(
+ device.vendor, device.model, channel.name)
+
+ item = QtGui.QStandardItem()
+ item.setData(uid, MeasurementDataModel._idRole)
+ item.setData(desc, MeasurementDataModel.descRole)
+ self.appendRow(item)
+ self.sort(0)
+ return item
+
+ @QtCore.Slot(object, object, object)
+ def update(self, device, channel, data):
+ '''Updates the data for the device (+channel) with the most recent
+ measurement from the given payload.'''
+
+ item = self.getItem(device, channel)
+
+ value, unit, mqflags = data
+ value_str = self.format_value(value)
+ unit_str = self.format_unit(unit)
+ mqflags_str = self.format_mqflags(mqflags)
+
+ disp = ' '.join([value_str, unit_str, mqflags_str])
+ item.setData(disp, QtCore.Qt.DisplayRole)
+
+class MultimeterDelegate(QtGui.QStyledItemDelegate):
+ '''Delegate to show the data items from a MeasurementDataModel.'''
+
+ def __init__(self, parent, font):
+ '''Initializes the delegate.
+
+ :param font: Font used for the description text, the value is drawn
+ with a slightly bigger and bold variant of the font.
+ '''
+
+ super(self.__class__, self).__init__(parent)
+
+ self._nfont = font
+ self._bfont = QtGui.QFont(self._nfont)
+
+ self._bfont.setBold(True)
+ if self._bfont.pixelSize() != -1:
+ self._bfont.setPixelSize(self._bfont.pixelSize() * 1.8)
+ else:
+ self._bfont.setPointSizeF(self._bfont.pointSizeF() * 1.8)
+
+ fi = QtGui.QFontInfo(self._nfont)
+ self._nfontheight = fi.pixelSize()
+
+ fm = QtGui.QFontMetrics(self._bfont)
+ r = fm.boundingRect('-XX.XXXXXX X XX')
+ self._size = QtCore.QSize(r.width() * 1.2, r.height() * 3.5)
+
+ def sizeHint(self, option=None, index=None):
+ return self._size
+
+ def paint(self, painter, options, index):
+ value = index.data(QtCore.Qt.DisplayRole)
+ desc = index.data(MeasurementDataModel.descRole)
+
+ # description in the top left corner
+ painter.setFont(self._nfont)
+ p = options.rect.topLeft()
+ p += QtCore.QPoint(self._nfontheight, 2 * self._nfontheight)
+ painter.drawText(p, desc)
+
+ # value in the center
+ painter.setFont(self._bfont)
+ r = options.rect.adjusted(self._nfontheight, 2.5 * self._nfontheight,
+ 0, 0)
+ painter.drawText(r, QtCore.Qt.AlignCenter, value)
--- /dev/null
+##
+## This file is part of the sigrok-meter project.
+##
+## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2014 Jens Steinhauser <jens.steinhauser@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+import datamodel
+import os.path
+import qtcompat
+import samplingthread
+import textwrap
+
+QtCore = qtcompat.QtCore
+QtGui = qtcompat.QtGui
+
+class EmptyMessageListView(QtGui.QListView):
+ '''List view that shows a message if the model im empty.'''
+
+ def __init__(self, message, parent=None):
+ super(self.__class__, self).__init__(parent)
+
+ self._message = message
+
+ def paintEvent(self, event):
+ m = self.model()
+ if m and m.rowCount():
+ super(self.__class__, self).paintEvent(event)
+ return
+
+ painter = QtGui.QPainter(self.viewport())
+ painter.drawText(self.rect(), QtCore.Qt.AlignCenter, self._message)
+
+class MainWindow(QtGui.QMainWindow):
+ '''The main window of the application.'''
+
+ def __init__(self, context, drivers):
+ super(self.__class__, self).__init__()
+
+ self.context = context
+
+ self.delegate = datamodel.MultimeterDelegate(self, self.font())
+ self.model = datamodel.MeasurementDataModel(self)
+ self.model.rowsInserted.connect(self.modelRowsInserted)
+
+ self.setup_ui()
+
+ self.thread = samplingthread.SamplingThread(self.context, drivers)
+ self.thread.measured.connect(self.model.update)
+ self.thread.error.connect(self.error)
+ self.thread.start()
+
+ def setup_ui(self):
+ self.setWindowTitle('sigrok-meter')
+ # resizing the listView below will increase this again
+ self.resize(10, 10)
+
+ p = os.path.abspath(os.path.dirname(__file__))
+ p = os.path.join(p, 'sigrok-logo-notext.png')
+ self.setWindowIcon(QtGui.QIcon(p))
+
+ actionQuit = QtGui.QAction(self)
+ actionQuit.setText('&Quit')
+ actionQuit.setIcon(QtGui.QIcon.fromTheme('application-exit'))
+ actionQuit.setShortcut('Ctrl+Q')
+ actionQuit.triggered.connect(self.close)
+
+ actionAbout = QtGui.QAction(self)
+ actionAbout.setText('&About')
+ actionAbout.setIcon(QtGui.QIcon.fromTheme('help-about'))
+ actionAbout.triggered.connect(self.show_about)
+
+ menubar = self.menuBar()
+ menuFile = menubar.addMenu('&File')
+ menuFile.addAction(actionQuit)
+ menuHelp = menubar.addMenu('&Help')
+ menuHelp.addAction(actionAbout)
+
+ self.listView = EmptyMessageListView('waiting for data...')
+ self.listView.setFrameShape(QtGui.QFrame.NoFrame)
+ self.listView.viewport().setBackgroundRole(QtGui.QPalette.Window)
+ self.listView.viewport().setAutoFillBackground(True)
+ self.listView.setMinimumWidth(260)
+ self.listView.setSelectionMode(QtGui.QAbstractItemView.NoSelection)
+ self.listView.setEditTriggers(QtGui.QAbstractItemView.NoEditTriggers)
+ self.listView.setVerticalScrollMode(QtGui.QAbstractItemView.ScrollPerPixel)
+ self.listView.setItemDelegate(self.delegate)
+ self.listView.setModel(self.model)
+ self.listView.setUniformItemSizes(True)
+ self.listView.setMinimumSize(self.delegate.sizeHint())
+
+ self.setCentralWidget(self.listView)
+ self.centralWidget().setContentsMargins(0, 0, 0, 0)
+
+ def closeEvent(self, event):
+ self.thread.stop()
+ event.accept()
+
+ @QtCore.Slot()
+ def show_about(self):
+ text = textwrap.dedent('''\
+ <div align="center">
+ <b>sigrok-meter</b><br/>
+ 0.1.0<br/>
+ Using libsigrok {} (lib version {}).<br/>
+ <a href='http://www.sigrok.org'>
+ http://www.sigrok.org</a><br/>
+ <br/>
+ This program comes with ABSOLUTELY NO WARRANTY;<br/>
+ for details visit
+ <a href='http://www.gnu.org/licenses/gpl.html'>
+ http://www.gnu.org/licenses/gpl.html</a>
+ </div>
+ '''.format(self.context.package_version, self.context.lib_version))
+
+ QtGui.QMessageBox.about(self, 'About sigrok-meter', text)
+
+ @QtCore.Slot(str)
+ def error(self, msg):
+ '''Error handler for the sampling thread.'''
+ QtGui.QMessageBox.critical(self, 'Error', msg)
+ self.close()
+
+ @QtCore.Slot(object, int, int)
+ def modelRowsInserted(self, parent, start, end):
+ '''Resizes the list view to the size of the content.'''
+
+ rows = self.model.rowCount()
+ dh = self.delegate.sizeHint().height()
+ self.listView.setMinimumHeight(dh * rows)
--- /dev/null
+##
+## This file is part of the sigrok-meter project.
+##
+## Copyright (C) 2014 Jens Steinhauser <jens.steinhauser@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+def load_modules(force_pyside):
+ if force_pyside:
+ import PySide.QtCore as _QtCore
+ import PySide.QtGui as _QtGui
+ else:
+ try:
+ # Use version 2 API in all cases, because that's what PySide uses.
+ import sip
+ sip.setapi('QVariant', 2)
+ sip.setapi('QDate', 2)
+ sip.setapi('QDateTime', 2)
+ sip.setapi('QString', 2)
+ sip.setapi('QTextStream', 2)
+ sip.setapi('QTime', 2)
+ sip.setapi('QUrl', 2)
+ sip.setapi('QVariant', 2)
+
+ import PyQt4.QtCore as _QtCore
+ import PyQt4.QtGui as _QtGui
+
+ # Add PySide compatible names.
+ _QtCore.Signal = _QtCore.pyqtSignal
+ _QtCore.Slot = _QtCore.pyqtSlot
+ except:
+ sys.stderr.write('import of PyQt4 failed, using PySide\n')
+ import PySide.QtCore as _QtCore
+ import PySide.QtGui as _QtGui
+
+ global QtCore
+ global QtGui
+ QtCore = _QtCore
+ QtGui = _QtGui
--- /dev/null
+##
+## This file is part of the sigrok-meter project.
+##
+## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2014 Jens Steinhauser <jens.steinhauser@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+import qtcompat
+import sigrok.core as sr
+
+QtCore = qtcompat.QtCore
+QtGui = qtcompat.QtGui
+
+class SamplingThread(QtCore.QObject):
+ '''A class that handles the reception of sigrok packets in the background.'''
+
+ class Worker(QtCore.QObject):
+ '''Helper class that does the actual work in another thread.'''
+
+ '''Signal emitted when new data arrived.'''
+ measured = QtCore.Signal(object, object, object)
+
+ '''Signal emmited in case of an error.'''
+ error = QtCore.Signal(str)
+
+ def __init__(self, context, drivers):
+ super(self.__class__, self).__init__()
+
+ self.context = context
+ self.drivers = drivers
+
+ self.sampling = False
+
+ @QtCore.Slot()
+ def start_sampling(self):
+ devices = []
+ for name, options in self.drivers:
+ try:
+ dr = self.context.drivers[name]
+ devices.append(dr.scan(**options)[0])
+ except:
+ self.error.emit(
+ 'Unable to get device for driver "{}".'.format(name))
+ return
+
+ self.session = self.context.create_session()
+ for dev in devices:
+ self.session.add_device(dev)
+ dev.open()
+ self.session.add_datafeed_callback(self.callback)
+ self.session.start()
+ self.sampling = True
+ self.session.run()
+
+ # If sampling is 'True' here, it means that 'stop_sampling()' was
+ # not called, therefore 'session.run()' ended too early, indicating
+ # an error.
+ if self.sampling:
+ self.error.emit('An error occured during the acquisition.')
+
+ def stop_sampling(self):
+ if self.sampling:
+ self.sampling = False
+ self.session.stop()
+
+ def callback(self, device, packet):
+ if not sr:
+ # In rare cases it can happen that the callback fires while
+ # the interpreter is shutting down. Then the sigrok module
+ # is already set to 'None'.
+ return
+
+ if packet.type != sr.PacketType.ANALOG:
+ return
+
+ if not len(packet.payload.channels):
+ return
+
+ # TODO: find a device with multiple channels in one packet
+ channel = packet.payload.channels[0]
+
+ # the most recent value
+ value = packet.payload.data[0][-1]
+
+ self.measured.emit(device, channel,
+ (value, packet.payload.unit, packet.payload.mq_flags))
+
+ # signal used to start the worker across threads
+ _start_signal = QtCore.Signal()
+
+ def __init__(self, context, drivers):
+ super(self.__class__, self).__init__()
+
+ self.worker = self.Worker(context, drivers)
+ self.thread = QtCore.QThread()
+ self.worker.moveToThread(self.thread)
+
+ self._start_signal.connect(self.worker.start_sampling)
+
+ # expose the signals of the worker
+ self.measured = self.worker.measured
+ self.error = self.worker.error
+
+ self.thread.start()
+
+ def start(self):
+ '''Starts sampling'''
+ self._start_signal.emit()
+
+ def stop(self):
+ '''Stops sampling and the background thread.'''
+ self.worker.stop_sampling()
+ self.thread.quit()
+ self.thread.wait()
##
import argparse
-import datetime
-import os.path
import re
import sigrok.core as sr
import sys
return result
if __name__ == '__main__':
- # The command line parsing and import of the Qt modules is done here,
- # so that the modules are imported before the classes below derive
- # from classes therein. The rest of the main function is at the bottom.
-
args = parse_cli()
- if args['pyside']:
- from PySide import QtCore, QtGui
- else:
- try:
- # Use version 2 API in all cases, because that's what PySide uses.
- import sip
- sip.setapi('QVariant', 2)
- sip.setapi('QDate', 2)
- sip.setapi('QDateTime', 2)
- sip.setapi('QString', 2)
- sip.setapi('QTextStream', 2)
- sip.setapi('QTime', 2)
- sip.setapi('QUrl', 2)
- sip.setapi('QVariant', 2)
-
- from PyQt4 import QtCore, QtGui
-
- # Add PySide compatible names.
- QtCore.Signal = QtCore.pyqtSignal
- QtCore.Slot = QtCore.pyqtSlot
- except:
- sys.stderr.write('import of PyQt4 failed, using PySide\n')
- from PySide import QtCore, QtGui
-
-class SamplingThread(QtCore.QObject):
- '''A class that handles the reception of sigrok packets in the background.'''
-
- class Worker(QtCore.QObject):
- '''Helper class that does the actual work in another thread.'''
-
- '''Signal emitted when new data arrived.'''
- measured = QtCore.Signal(object, object, object)
-
- '''Signal emmited in case of an error.'''
- error = QtCore.Signal(str)
-
- def __init__(self, context, drivers):
- super(self.__class__, self).__init__()
-
- self.context = context
- self.drivers = drivers
-
- self.sampling = False
-
- @QtCore.Slot()
- def start_sampling(self):
- devices = []
- for name, options in self.drivers:
- try:
- dr = self.context.drivers[name]
- devices.append(dr.scan(**options)[0])
- except:
- self.error.emit(
- 'Unable to get device for driver "{}".'.format(name))
- return
-
- self.session = self.context.create_session()
- for dev in devices:
- self.session.add_device(dev)
- dev.open()
- self.session.add_datafeed_callback(self.callback)
- self.session.start()
- self.sampling = True
- self.session.run()
-
- # If sampling is 'True' here, it means that 'stop_sampling()' was
- # not called, therefore 'session.run()' ended too early, indicating
- # an error.
- if self.sampling:
- self.error.emit('An error occured during the acquisition.')
-
- def stop_sampling(self):
- if self.sampling:
- self.sampling = False
- self.session.stop()
-
- def callback(self, device, packet):
- if not sr:
- # In rare cases it can happen that the callback fires while
- # the interpreter is shutting down. Then the sigrok module
- # is already set to 'None'.
- return
-
- if packet.type != sr.PacketType.ANALOG:
- return
-
- if not len(packet.payload.channels):
- return
-
- # TODO: find a device with multiple channels in one packet
- channel = packet.payload.channels[0]
-
- # the most recent value
- value = packet.payload.data[0][-1]
-
- self.measured.emit(device, channel,
- (value, packet.payload.unit, packet.payload.mq_flags))
-
- # signal used to start the worker across threads
- _start_signal = QtCore.Signal()
-
- def __init__(self, context, drivers):
- super(self.__class__, self).__init__()
-
- self.worker = self.Worker(context, drivers)
- self.thread = QtCore.QThread()
- self.worker.moveToThread(self.thread)
-
- self._start_signal.connect(self.worker.start_sampling)
-
- # expose the signals of the worker
- self.measured = self.worker.measured
- self.error = self.worker.error
-
- self.thread.start()
-
- def start(self):
- '''Starts sampling'''
- self._start_signal.emit()
-
- def stop(self):
- '''Stops sampling and the background thread.'''
- self.worker.stop_sampling()
- self.thread.quit()
- self.thread.wait()
-
-class MeasurementDataModel(QtGui.QStandardItemModel):
- '''Model to hold the measured values.'''
-
- '''Role used to identify and find the item.'''
- _idRole = QtCore.Qt.UserRole + 1
-
- '''Role used to store the device vendor and model.'''
- descRole = QtCore.Qt.UserRole + 2
-
- def __init__(self, parent):
- super(self.__class__, self).__init__(parent)
-
- # Use the description text to sort the items for now, because the
- # _idRole holds tuples, and using them to sort doesn't work.
- self.setSortRole(MeasurementDataModel.descRole)
-
- # Used in 'format_value()' to check against.
- self.inf = float('inf')
-
- def format_unit(self, u):
- units = {
- sr.Unit.VOLT: 'V',
- sr.Unit.AMPERE: 'A',
- sr.Unit.OHM: u'\u03A9',
- sr.Unit.FARAD: 'F',
- sr.Unit.KELVIN: 'K',
- sr.Unit.CELSIUS: u'\u00B0C',
- sr.Unit.FAHRENHEIT: u'\u00B0F',
- sr.Unit.HERTZ: 'Hz',
- sr.Unit.PERCENTAGE: '%',
- # sr.Unit.BOOLEAN
- sr.Unit.SECOND: 's',
- sr.Unit.SIEMENS: 'S',
- sr.Unit.DECIBEL_MW: 'dBu',
- sr.Unit.DECIBEL_VOLT: 'dBV',
- # sr.Unit.UNITLESS
- sr.Unit.DECIBEL_SPL: 'dB',
- # sr.Unit.CONCENTRATION
- sr.Unit.REVOLUTIONS_PER_MINUTE: 'rpm',
- sr.Unit.VOLT_AMPERE: 'VA',
- sr.Unit.WATT: 'W',
- sr.Unit.WATT_HOUR: 'Wh',
- sr.Unit.METER_SECOND: 'm/s',
- sr.Unit.HECTOPASCAL: 'hPa',
- sr.Unit.HUMIDITY_293K: '%rF',
- sr.Unit.DEGREE: u'\u00B0',
- sr.Unit.HENRY: 'H'
- }
-
- return units.get(u, '')
-
- def format_mqflags(self, mqflags):
- if sr.QuantityFlag.AC in mqflags:
- return 'AC'
- elif sr.QuantityFlag.DC in mqflags:
- return 'DC'
- else:
- return ''
-
- def format_value(self, mag):
- if mag == self.inf:
- return u'\u221E'
- return '{:f}'.format(mag)
-
- def getItem(self, device, channel):
- '''Returns the item for the device + channel combination from the model,
- or creates a new item if no existing one matches.'''
-
- # unique identifier for the device + channel
- # TODO: isn't there something better?
- uid = (
- device.vendor,
- device.model,
- device.serial_number(),
- device.connection_id(),
- channel.index
- )
-
- # find the correct item in the model
- for row in range(self.rowCount()):
- item = self.item(row)
- rid = item.data(MeasurementDataModel._idRole)
- rid = tuple(rid) # PySide returns a list
- if uid == rid:
- return item
+ import qtcompat
+ qtcompat.load_modules(args['pyside'])
+ QtCore = qtcompat.QtCore
+ QtGui = qtcompat.QtGui
+ import mainwindow
- # nothing found, create a new item
- desc = '{} {}, channel "{}"'.format(
- device.vendor, device.model, channel.name)
-
- item = QtGui.QStandardItem()
- item.setData(uid, MeasurementDataModel._idRole)
- item.setData(desc, MeasurementDataModel.descRole)
- self.appendRow(item)
- self.sort(0)
- return item
-
- @QtCore.Slot(object, object, object)
- def update(self, device, channel, data):
- '''Updates the data for the device (+channel) with the most recent
- measurement from the given payload.'''
-
- item = self.getItem(device, channel)
-
- value, unit, mqflags = data
- value_str = self.format_value(value)
- unit_str = self.format_unit(unit)
- mqflags_str = self.format_mqflags(mqflags)
-
- disp = ' '.join([value_str, unit_str, mqflags_str])
- item.setData(disp, QtCore.Qt.DisplayRole)
-
-class MultimeterDelegate(QtGui.QStyledItemDelegate):
- '''Delegate to show the data items from a MeasurementDataModel.'''
-
- def __init__(self, parent, font):
- '''Initializes the delegate.
-
- :param font: Font used for the description text, the value is drawn
- with a slightly bigger and bold variant of the font.
- '''
-
- super(self.__class__, self).__init__(parent)
-
- self._nfont = font
- self._bfont = QtGui.QFont(self._nfont)
-
- self._bfont.setBold(True)
- if self._bfont.pixelSize() != -1:
- self._bfont.setPixelSize(self._bfont.pixelSize() * 1.8)
- else:
- self._bfont.setPointSizeF(self._bfont.pointSizeF() * 1.8)
-
- fi = QtGui.QFontInfo(self._nfont)
- self._nfontheight = fi.pixelSize()
-
- fm = QtGui.QFontMetrics(self._bfont)
- r = fm.boundingRect('-XX.XXXXXX X XX')
- self._size = QtCore.QSize(r.width() * 1.2, r.height() * 3.5)
-
- def sizeHint(self, option=None, index=None):
- return self._size
-
- def paint(self, painter, options, index):
- value = index.data(QtCore.Qt.DisplayRole)
- desc = index.data(MeasurementDataModel.descRole)
-
- # description in the top left corner
- painter.setFont(self._nfont)
- p = options.rect.topLeft()
- p += QtCore.QPoint(self._nfontheight, 2 * self._nfontheight)
- painter.drawText(p, desc)
-
- # value in the center
- painter.setFont(self._bfont)
- r = options.rect.adjusted(self._nfontheight, 2.5 * self._nfontheight,
- 0, 0)
- painter.drawText(r, QtCore.Qt.AlignCenter, value)
-
-class EmptyMessageListView(QtGui.QListView):
- '''List view that shows a message if the model im empty.'''
-
- def __init__(self, message, parent=None):
- super(self.__class__, self).__init__(parent)
-
- self._message = message
-
- def paintEvent(self, event):
- m = self.model()
- if m and m.rowCount():
- super(self.__class__, self).paintEvent(event)
- return
-
- painter = QtGui.QPainter(self.viewport())
- painter.drawText(self.rect(), QtCore.Qt.AlignCenter, self._message)
-
-class SigrokMeter(QtGui.QMainWindow):
- '''The main window of the application.'''
-
- def __init__(self, context, drivers):
- super(SigrokMeter, self).__init__()
-
- self.context = context
-
- self.delegate = MultimeterDelegate(self, self.font())
- self.model = MeasurementDataModel(self)
- self.model.rowsInserted.connect(self.modelRowsInserted)
-
- self.setup_ui()
-
- self.thread = SamplingThread(self.context, drivers)
- self.thread.measured.connect(self.model.update)
- self.thread.error.connect(self.error)
- self.thread.start()
-
- def setup_ui(self):
- self.setWindowTitle('sigrok-meter')
- # resizing the listView below will increase this again
- self.resize(10, 10)
-
- p = os.path.abspath(os.path.dirname(__file__))
- p = os.path.join(p, 'sigrok-logo-notext.png')
- self.setWindowIcon(QtGui.QIcon(p))
-
- actionQuit = QtGui.QAction(self)
- actionQuit.setText('&Quit')
- actionQuit.setIcon(QtGui.QIcon.fromTheme('application-exit'))
- actionQuit.setShortcut('Ctrl+Q')
- actionQuit.triggered.connect(self.close)
-
- actionAbout = QtGui.QAction(self)
- actionAbout.setText('&About')
- actionAbout.setIcon(QtGui.QIcon.fromTheme('help-about'))
- actionAbout.triggered.connect(self.show_about)
-
- menubar = self.menuBar()
- menuFile = menubar.addMenu('&File')
- menuFile.addAction(actionQuit)
- menuHelp = menubar.addMenu('&Help')
- menuHelp.addAction(actionAbout)
-
- self.listView = EmptyMessageListView('waiting for data...')
- self.listView.setFrameShape(QtGui.QFrame.NoFrame)
- self.listView.viewport().setBackgroundRole(QtGui.QPalette.Window)
- self.listView.viewport().setAutoFillBackground(True)
- self.listView.setMinimumWidth(260)
- self.listView.setSelectionMode(QtGui.QAbstractItemView.NoSelection)
- self.listView.setEditTriggers(QtGui.QAbstractItemView.NoEditTriggers)
- self.listView.setVerticalScrollMode(QtGui.QAbstractItemView.ScrollPerPixel)
- self.listView.setItemDelegate(self.delegate)
- self.listView.setModel(self.model)
- self.listView.setUniformItemSizes(True)
- self.listView.setMinimumSize(self.delegate.sizeHint())
-
- self.setCentralWidget(self.listView)
- self.centralWidget().setContentsMargins(0, 0, 0, 0)
-
- def closeEvent(self, event):
- self.thread.stop()
- event.accept()
-
- @QtCore.Slot()
- def show_about(self):
- text = textwrap.dedent('''\
- <div align="center">
- <b>sigrok-meter</b><br/>
- 0.1.0<br/>
- Using libsigrok {} (lib version {}).<br/>
- <a href='http://www.sigrok.org'>
- http://www.sigrok.org</a><br/>
- <br/>
- This program comes with ABSOLUTELY NO WARRANTY;<br/>
- for details visit
- <a href='http://www.gnu.org/licenses/gpl.html'>
- http://www.gnu.org/licenses/gpl.html</a>
- </div>
- '''.format(self.context.package_version, self.context.lib_version))
-
- QtGui.QMessageBox.about(self, 'About sigrok-meter', text)
-
- @QtCore.Slot(str)
- def error(self, msg):
- '''Error handler for the sampling thread.'''
- QtGui.QMessageBox.critical(self, 'Error', msg)
- self.close()
-
- @QtCore.Slot(object, int, int)
- def modelRowsInserted(self, parent, start, end):
- '''Resizes the list view to the size of the content.'''
-
- rows = self.model.rowCount()
- dh = self.delegate.sizeHint().height()
- self.listView.setMinimumHeight(dh * rows)
-
-if __name__ == '__main__':
context = sr.Context_create()
context.log_level = args['loglevel']
app = QtGui.QApplication([])
- s = SigrokMeter(context, args['drivers'])
+ s = mainwindow.MainWindow(context, args['drivers'])
s.show()
sys.exit(app.exec_())
projects / sigrok-meter.git / commitdiff