- 'DATA': <data1> contains the MISO data, <data2> contains the MOSI data.
The data is _usually_ 8 bits (but can also be fewer or more bits).
Both data items are Python numbers (not strings), or None if the respective
- probe was not supplied.
+ channel was not supplied.
- 'BITS': <data1>/<data2> contain a list of bit values in this MISO/MOSI data
item, and for each of those also their respective start-/endsample numbers.
- 'CS CHANGE': <data1> is the old CS# pin value, <data2> is the new value.
license = 'gplv2+'
inputs = ['logic']
outputs = ['spi']
- probes = [
+ channels = (
{'id': 'clk', 'name': 'CLK', 'desc': 'Clock'},
- ]
- optional_probes = [
+ )
+ optional_channels = (
{'id': 'miso', 'name': 'MISO', 'desc': 'Master in, slave out'},
{'id': 'mosi', 'name': 'MOSI', 'desc': 'Master out, slave in'},
{'id': 'cs', 'name': 'CS#', 'desc': 'Chip-select'},
- ]
+ )
options = (
{'id': 'cs_polarity', 'desc': 'CS# polarity', 'default': 'active-low',
'values': ('active-low', 'active-high')},
'values': (0, 1)},
{'id': 'cpha', 'desc': 'Clock phase', 'default': 0,
'values': (0, 1)},
- {'id': 'bitorder', 'desc': 'Bit order within the SPI data',
+ {'id': 'bitorder', 'desc': 'Bit order',
'default': 'msb-first', 'values': ('msb-first', 'lsb-first')},
- {'id': 'wordsize', 'desc': 'Word size of SPI data', 'default': 8},
+ {'id': 'wordsize', 'desc': 'Word size', 'default': 8},
+ )
+ annotations = (
+ ('miso-data', 'MISO data'),
+ ('mosi-data', 'MOSI data'),
+ ('miso-bits', 'MISO bits'),
+ ('mosi-bits', 'MOSI bits'),
+ ('warnings', 'Human-readable warnings'),
)
- annotations = [
- ['miso-data', 'MISO data'],
- ['mosi-data', 'MOSI data'],
- ['miso-bits', 'MISO bits'],
- ['mosi-bits', 'MOSI bits'],
- ['warnings', 'Human-readable warnings'],
- ]
annotation_rows = (
('miso-data', 'MISO data', (0,)),
('miso-bits', 'MISO bits', (2,)),