endif
if HW_SYSCLK_SLA5032
src_libdrivers_la_SOURCES += \
- src/hardware/sysclk-sla5032/sla5032.h \
- src/hardware/sysclk-sla5032/sla5032.c \
src/hardware/sysclk-sla5032/protocol.h \
src/hardware/sysclk-sla5032/protocol.c \
src/hardware/sysclk-sla5032/api.c
#include <libsigrok/libsigrok.h>
#include <libsigrok-internal.h>
#include "protocol.h"
-#include "sla5032.h"
/* Number of logic channels. */
#define NUM_CHANNELS 32
#include <config.h>
#include <string.h>
#include "protocol.h"
-#include "sla5032.h"
+
+/*
+ * Register description (all registers are 32bit):
+ *
+ * Rx - means register with index x (register address is x*4)
+ *
+ * R0(wr): trigger sel0 (low/high)
+ * R0(rd): n*256 samples (post trigger) captured
+ *
+ * R1(wr): trigger sel1 (level/edge)
+ * R1(rd): current sampled value
+ *
+ * R2(wr): trigger enable mask
+ *
+ * R2(rd): (status register)
+ * b0: 1 - keys entered
+ * b1: 1 - triggered
+ * b3: 1 - capture done
+ *
+ * not configured: B6FF9C97, 12FF9C97, 92FF9C97, 16FF9C97, ...
+ * configured: A5A5A5A0, after enter keys A5A5A5A1
+ *
+ * sel1 (one bit per channel):
+ * 0 - level triggered
+ * 1 - edge triggered
+ *
+ * sel0 (one bit per channel):
+ * 0 - (low level trigger, sel1=0), (falling edge, sel1=1)
+ * 1 - (high level trigger, sel1=0), (raising edge, sel1=1)
+ *
+ * mask (one bit per channel):
+ * 0 - disable trigger on channel n
+ * 1 - enable trigger on channel n
+ *
+ * R3: upload base address or num samples (0x300000)
+ *
+ * R4: pll divisor - 1
+ * 0 - div 1 (no division)
+ * 1 - div 2
+ * 2 - div 3
+ * ...
+ * n-1 - div n
+ *
+ * R5(rd/wr):
+ * b0: 1 - enable pll mul 2, 0 - disable pll mul 2
+ * b1: ??
+ * b2: ??
+ * b3: ??
+ * b4:
+ * b5: ->0->1 upload next data chunk (to pc)
+ * b6: ??
+ * b7: 0 - enable pll mul 1.25, 1 - disable pll mul 1.25
+ * b8: ??
+ *
+ * R6: post trigger depth, value x means (x+1)*256 (samples), min value is 1
+ * R7: pre trigger depth, value y means (y+1)*256 (samples), min value is 1
+ * (x+1)*256 + (y+1)*256 <= 64M
+ *
+ * R9: PWM1 HI (1 width-1)
+ * R10: PWM1 LO (0 width-1)
+ *
+ * R11: PWM2 HI (1 width-1)
+ * R12: PWM2 LO (0 width-1)
+ *
+ * R14:
+ * 1 - start sample?
+ * 0 - upload done?
+ *
+ * R16: rom key 0
+ * R17: rom key 1
+ *
+ * key0 is F6 81 13 64
+ * key1 is 00 00 00 00
+ *
+ * start sample:
+ * r5 <= b2 <= 0
+ * r5 <= b3 <= 0
+ * r5 <= b5 <= 0
+ *
+ * r5 <= b6 <= 1
+ * r5 <= b1 <= 1
+ * r5 <= b1 <= 0
+ *
+ * r5 <= b8 <= 1
+ * r5 <= b8 <= 0
+ *
+ * r5 <= b6 <= 1
+ * r5 <= b2 <= 1
+ *
+ * read back:
+ * r5 <= 0x08 (b3)
+ * r5 <= 0x28 (b5,b3)
+ */
+
+#define BITSTREAM_NAME "sysclk-sla5032.bit"
+#define BITSTREAM_MAX_SIZE (512 * 1024) /* Bitstream size limit for safety */
+#define BITSTREAM_HEADER_SIZE 0x69
+#define FW_CHUNK_SIZE 250
+#define XILINX_SYNC_WORD 0xAA995566
+
+static int la_write_cmd_buf(const struct sr_usb_dev_inst *usb, uint8_t cmd,
+ unsigned int addr, unsigned int len, const void *data)
+{
+ uint8_t *cmd_pkt;
+ int ret, xfer_len;
+ int cmd_len;
+
+ cmd_pkt = g_try_malloc(len + 10);
+ if (!cmd_pkt) {
+ ret = SR_ERR_MALLOC;
+ goto exit;
+ }
+
+ cmd_pkt[0] = cmd;
+ cmd_len = 1;
+ xfer_len = 0;
+
+ switch(cmd) {
+ case CMD_INIT_FW_UPLOAD: /* init firmware upload */
+ break;
+ case CMD_UPLOAD_FW_CHUNK:
+ cmd_pkt[1] = len;
+ cmd_len += 1 + len;
+ memcpy(&cmd_pkt[2], data, len);
+ break;
+ case CMD_READ_REG: /* read register */
+ cmd_pkt[1] = addr;
+ cmd_pkt[2] = len;
+ cmd_len += 2;
+ break;
+ case CMD_WRITE_REG: /* write register */
+ cmd_pkt[1] = addr;
+ cmd_pkt[2] = len;
+ cmd_len += 2 + len;
+ memcpy(&cmd_pkt[3], data, len);
+ break;
+ case CMD_READ_MEM: /* read mem */
+ cmd_pkt[1] = (addr >> 8) & 0xFF;
+ cmd_pkt[2] = addr & 0xFF;
+ cmd_pkt[3] = len;
+ cmd_len += 3;
+ break;
+ case CMD_READ_DATA: /* read samples */
+ cmd_pkt[1] = addr;
+ cmd_len += 1;
+ break;
+ }
+
+ ret = libusb_bulk_transfer(usb->devhdl, EP_COMMAND, cmd_pkt, cmd_len,
+ &xfer_len, USB_CMD_TIMEOUT_MS);
+ if (ret != 0) {
+ sr_dbg("Failed to send command %d: %s.",
+ cmd, libusb_error_name(ret));
+ return SR_ERR;
+ }
+
+ if (xfer_len != cmd_len) {
+ sr_dbg("Invalid send command response of length %d.", xfer_len);
+ return SR_ERR;
+ }
+
+exit:
+ g_free(cmd_pkt);
+ return ret;
+}
+
+static int la_read_reg(const struct sr_usb_dev_inst *usb, unsigned int reg, uint32_t *val)
+{
+ int ret, xfer_len;
+ uint32_t reply;
+
+ ret = la_write_cmd_buf(usb, CMD_READ_REG, reg * sizeof(uint32_t),
+ sizeof(reply), NULL); /* rd reg */
+ if (ret != SR_OK)
+ return ret;
+
+ ret = libusb_bulk_transfer(usb->devhdl, EP_REPLY, (uint8_t *)&reply,
+ sizeof(reply), &xfer_len, USB_REPLY_TIMEOUT_MS);
+ if (ret != SR_OK)
+ return ret;
+
+ if (xfer_len != sizeof(uint32_t)) {
+ sr_dbg("Invalid register read response of length %d.", xfer_len);
+ return SR_ERR;
+ }
+
+ *val = GUINT32_FROM_BE(reply);
+
+ return ret;
+}
+
+static int la_write_reg(const struct sr_usb_dev_inst *usb, unsigned int reg, uint32_t val)
+{
+ uint32_t val_be;
+
+ val_be = GUINT32_TO_BE(val);
+
+ return la_write_cmd_buf(usb, CMD_WRITE_REG, reg * sizeof(uint32_t),
+ sizeof(val_be), &val_be); /* wr reg */
+}
+
+static int la_read_mem(const struct sr_usb_dev_inst *usb, unsigned int addr, unsigned int len, void *data)
+{
+ int ret, xfer_len;
+
+ ret = la_write_cmd_buf(usb, CMD_READ_MEM, addr, len, NULL); /* rd mem */
+ if (ret != SR_OK)
+ return ret;
+
+ xfer_len = 0;
+ ret = libusb_bulk_transfer(usb->devhdl, EP_REPLY, (uint8_t *)data,
+ len, &xfer_len, USB_REPLY_TIMEOUT_MS);
+ if (xfer_len != (int)len) {
+ sr_dbg("Invalid memory read response of length %d.", xfer_len);
+ return SR_ERR;
+ }
+
+ return ret;
+}
+
+static int la_read_samples(const struct sr_usb_dev_inst *usb, unsigned int addr)
+{
+ return la_write_cmd_buf(usb, CMD_READ_DATA, addr, 0, NULL); /* rd samples */
+}
+
+SR_PRIV int sla5032_set_depth(const struct sr_usb_dev_inst *usb, uint32_t pre, uint32_t post)
+{
+ int ret;
+
+ /* (pre + 1)*256 + (post + 1)*256 <= 64*1024*1024 */
+ ret = la_write_reg(usb, 7, pre);
+ if (ret != SR_OK)
+ return ret;
+
+ return la_write_reg(usb, 6, post);
+}
+
+SR_PRIV int sla5032_set_triggers(const struct sr_usb_dev_inst *usb,
+ uint32_t trg_value, uint32_t trg_edge_mask, uint32_t trg_mask)
+{
+ int ret;
+
+ sr_dbg("set trigger: val: %08X, e_mask: %08X, mask: %08X.", trg_value,
+ trg_edge_mask, trg_mask);
+
+ ret = la_write_reg(usb, 0, trg_value);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la_write_reg(usb, 1, trg_edge_mask);
+ if (ret != SR_OK)
+ return ret;
+
+ return la_write_reg(usb, 2, trg_mask);
+}
+
+static int la_set_res_reg_bit(const struct sr_usb_dev_inst *usb,
+ unsigned int reg, unsigned int bit, unsigned int set_bit)
+{
+ int ret;
+ uint32_t v;
+
+ v = 0;
+ ret = la_read_reg(usb, reg, &v);
+ if (ret != SR_OK)
+ return ret;
+
+ if (set_bit)
+ v |= (1u << bit);
+ else
+ v &= ~(1u << bit);
+
+ return la_write_reg(usb, reg, v);
+}
+
+struct pll_tbl_entry_t
+{
+ unsigned int sr;
+ uint32_t pll_div_minus_1;
+ unsigned int pll_mul_flags;
+};
+
+enum {
+ PLL_MUL2 = 1, /* x2 */
+ PLL_MUL1_25 = 2, /* x1.25 */
+};
+
+static const struct pll_tbl_entry_t pll_tbl[] = {
+ { 500000000, 0, PLL_MUL2 | PLL_MUL1_25 }, /* 500M = f*2*1.25/1 */
+ { 400000000, 0, PLL_MUL2 }, /* 400M = f*2/1 */
+ { 250000000, 0, PLL_MUL1_25 }, /* 250M = f*1.25/1 */
+ { 200000000, 0, 0 }, /* 200M = f/1 */
+ { 100000000, 1, 0 }, /* 100M = f/2 */
+ { 50000000, 3, 0 }, /* 50M = f/4 */
+ { 25000000, 7, 0 }, /* 25M = f/8 */
+ { 20000000, 9, 0 }, /* 20M = f/10 */
+ { 10000000, 19, 0 }, /* 10M = f/20 */
+ { 5000000, 39, 0 }, /* 5M = f/40 */
+ { 2000000, 99, 0 }, /* 2M = f/100 */
+ { 1000000, 199, 0 }, /* 1M = f/200 */
+ { 500000, 399, 0 }, /* 500k = f/400 */
+ { 200000, 999, 0 }, /* 200k = f/1000 */
+ { 100000, 1999, 0 }, /* 100k = f/2000 */
+ { 50000, 3999, 0 }, /* 50k = f/4000 */
+ { 20000, 9999, 0 }, /* 20k = f/10000 */
+ { 10000, 19999, 0 }, /* 10k = f/20000 */
+ { 5000, 39999, 0 }, /* 5k = f/40000 */
+ { 2000, 99999, 0 }, /* 2k = f/100000 */
+};
+
+SR_PRIV int sla5032_set_samplerate(const struct sr_usb_dev_inst *usb, unsigned int sr)
+{
+ int i, ret;
+ const struct pll_tbl_entry_t *e;
+
+ e = NULL;
+ for (i = 0; i < (int)ARRAY_SIZE(pll_tbl); i++) {
+ if (sr == pll_tbl[i].sr) {
+ e = &pll_tbl[i];
+ break;
+ }
+ }
+
+ if (!e)
+ return SR_ERR_SAMPLERATE;
+
+ sr_dbg("set sample rate: %u.", e->sr);
+
+ ret = la_write_reg(usb, 4, e->pll_div_minus_1);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la_set_res_reg_bit(usb, 5, 0,
+ (e->pll_mul_flags & PLL_MUL2) ? 1 : 0); /* bit0 (1=en_mul2) */
+ if (ret != SR_OK)
+ return ret;
+
+ return la_set_res_reg_bit(usb, 5, 7,
+ (e->pll_mul_flags & PLL_MUL1_25) ? 0 : 1); /* bit7 (0=en_mul_1.25) */
+}
+
+SR_PRIV int sla5032_start_sample(const struct sr_usb_dev_inst *usb)
+{
+ int ret;
+ const unsigned int bits[10][2] = {
+ {2, 0}, {3, 0}, {5, 0}, {6, 1}, {1, 1},
+ {1, 0}, {8, 1}, {8, 0}, {6, 1}, {2, 1},
+ };
+
+ ret = la_write_reg(usb, 14, 1);
+ if (ret != SR_OK)
+ return ret;
+
+ for (size_t i = 0; i < ARRAY_SIZE(bits); i++) {
+ ret = la_set_res_reg_bit(usb, 5, bits[i][0], bits[i][1]);
+ if (ret != SR_OK)
+ return ret;
+ }
+
+ return ret;
+}
+
+SR_PRIV int sla5032_get_status(const struct sr_usb_dev_inst *usb, uint32_t status[3])
+{
+ int ret;
+ uint32_t v;
+
+ ret = la_read_reg(usb, 1, &status[0]);
+ if (ret != SR_OK)
+ return ret;
+
+ status[1] = 1; /* wait trigger */
+
+ ret = la_read_reg(usb, 0, &status[2]);
+ if (ret != SR_OK)
+ return ret;
+
+ v = 0;
+ ret = la_read_reg(usb, 2, &v);
+ if (ret != SR_OK)
+ return ret;
+
+ if (v & 8) {
+ status[1] = 3; /* sample done */
+ sr_dbg("get status, reg2: %08X.", v);
+ } else if (v & 2) {
+ status[1] = 2; /* triggered */
+ }
+
+ return ret;
+}
+
+static int la_read_samples_data(const struct sr_usb_dev_inst *usb, void *buf,
+ unsigned int len, int *xfer_len)
+{
+ return libusb_bulk_transfer(usb->devhdl, EP_DATA, (uint8_t *)buf, len,
+ xfer_len, USB_DATA_TIMEOUT_MS);
+}
+
+SR_PRIV int sla5032_read_data_chunk(const struct sr_usb_dev_inst *usb,
+ void *buf, unsigned int len, int *xfer_len)
+{
+ int ret;
+
+ ret = la_read_samples(usb, 3);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la_write_reg(usb, 3, 0x300000);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la_set_res_reg_bit(usb, 5, 4, 0);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la_set_res_reg_bit(usb, 5, 4, 1);
+ if (ret != SR_OK)
+ return ret;
+
+ return la_read_samples_data(usb, buf, len, xfer_len);
+}
+
+SR_PRIV int sla5032_set_read_back(const struct sr_usb_dev_inst *usb)
+{
+ int ret;
+
+ ret = la_write_reg(usb, 5, 0x08);
+ if (ret != SR_OK)
+ return ret;
+
+ return la_write_reg(usb, 5, 0x28);
+}
+
+SR_PRIV int sla5032_set_pwm1(const struct sr_usb_dev_inst* usb, uint32_t hi, uint32_t lo)
+{
+ int ret;
+
+ ret = la_write_reg(usb, 9, hi);
+ if (ret != SR_OK)
+ return ret;
+
+ return la_write_reg(usb, 10, lo);
+}
+
+SR_PRIV int sla5032_set_pwm2(const struct sr_usb_dev_inst* usb, uint32_t hi, uint32_t lo)
+{
+ int ret;
+
+ ret = la_write_reg(usb, 11, hi);
+ if (ret != SR_OK)
+ return ret;
+
+ return la_write_reg(usb, 12, lo);
+}
+
+SR_PRIV int sla5032_write_reg14_zero(const struct sr_usb_dev_inst* usb)
+{
+ return la_write_reg(usb, 14, 0);
+}
+
+static int la_cfg_fpga_done(const struct sr_usb_dev_inst *usb, unsigned int addr)
+{
+ uint8_t done_key[8];
+ uint32_t k0, k1;
+ unsigned int reg2;
+ int ret;
+
+ memset(done_key, 0, sizeof(done_key));
+
+ ret = la_read_mem(usb, addr, sizeof(done_key), done_key); /* read key from eeprom */
+ if (ret != SR_OK)
+ return ret;
+
+ k0 = RL32(done_key); /* 0x641381F6 */
+ k1 = RL32(done_key + 4); /* 0x00000000 */
+
+ sr_dbg("cfg fpga done, k0: %08X, k1: %08X.", k0, k1);
+
+ ret = la_write_reg(usb, 16, k0);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la_write_reg(usb, 17, k1);
+ if (ret != SR_OK)
+ return ret;
+
+ reg2 = 0;
+ ret = la_read_reg(usb, 2, ®2);
+
+ sr_dbg("cfg fpga done, reg2: %08X.", reg2);
+
+ return ret;
+}
+
+/*
+ * Load a bitstream file into memory. Returns a newly allocated array
+ * consisting of a 32-bit length field followed by the bitstream data.
+ */
+static unsigned char *load_bitstream(struct sr_context *ctx,
+ const char *name, int *length_p)
+{
+ struct sr_resource fw;
+ unsigned char *stream, *fw_data;
+ ssize_t length, count;
+
+ if (sr_resource_open(ctx, &fw, SR_RESOURCE_FIRMWARE, name) != SR_OK)
+ return NULL;
+
+ if (fw.size <= BITSTREAM_HEADER_SIZE || fw.size > BITSTREAM_MAX_SIZE) {
+ sr_err("Refusing to load bitstream of unreasonable size "
+ "(%" PRIu64 " bytes).", fw.size);
+ sr_resource_close(ctx, &fw);
+ return NULL;
+ }
+
+ stream = g_try_malloc(fw.size);
+ if (!stream) {
+ sr_err("Failed to allocate bitstream buffer.");
+ sr_resource_close(ctx, &fw);
+ return NULL;
+ }
+
+ count = sr_resource_read(ctx, &fw, stream, fw.size);
+ sr_resource_close(ctx, &fw);
+
+ if (count != (ssize_t)fw.size) {
+ sr_err("Failed to read bitstream '%s'.", name);
+ g_free(stream);
+ return NULL;
+ }
+
+ if (RB32(stream + BITSTREAM_HEADER_SIZE) != XILINX_SYNC_WORD) {
+ sr_err("Invalid bitstream signature.");
+ g_free(stream);
+ return NULL;
+ }
+
+ length = fw.size - BITSTREAM_HEADER_SIZE + 0x100;
+ fw_data = g_try_malloc(length);
+ if (!fw_data) {
+ sr_err("Failed to allocate bitstream aligned buffer.");
+ return NULL;
+ }
+
+ memset(fw_data, 0xFF, 0x100);
+ memcpy(fw_data + 0x100, stream + BITSTREAM_HEADER_SIZE,
+ fw.size - BITSTREAM_HEADER_SIZE);
+ g_free(stream);
+
+ *length_p = length;
+
+ return fw_data;
+}
+
+static int sla5032_is_configured(const struct sr_usb_dev_inst* usb, gboolean *is_configured)
+{
+ int ret;
+ uint32_t reg2;
+
+ reg2 = 0;
+ ret = la_read_reg(usb, 2, ®2);
+ if (ret == SR_OK)
+ *is_configured = (reg2 & 0xFFFFFFF1) == 0xA5A5A5A1 ? TRUE : FALSE;
+
+ return ret;
+}
+
+/* Load a Binary File from the firmware directory, transfer it to the device. */
+static int sla5032_send_bitstream(struct sr_context *ctx,
+ const struct sr_usb_dev_inst *usb, const char *name)
+{
+ unsigned char *stream;
+ int ret, length, i, n, m;
+ uint32_t reg2;
+
+ if (!ctx || !usb || !name)
+ return SR_ERR_BUG;
+
+ stream = load_bitstream(ctx, name, &length);
+ if (!stream)
+ return SR_ERR;
+
+ sr_dbg("Downloading FPGA bitstream '%s'.", name);
+
+ reg2 = 0;
+ ret = la_read_reg(usb, 2, ®2);
+ sr_dbg("send bitstream, reg2: %08X.", reg2);
+
+ /* Transfer the entire bitstream in one URB. */
+ ret = la_write_cmd_buf(usb, CMD_INIT_FW_UPLOAD, 0, 0, NULL); /* init firmware upload */
+ if (ret != SR_OK) {
+ g_free(stream);
+ return ret;
+ }
+
+ n = length / FW_CHUNK_SIZE;
+ m = length % FW_CHUNK_SIZE;
+
+ for (i = 0; i < n; i++) {
+ /* upload firmware chunk */
+ ret = la_write_cmd_buf(usb, CMD_UPLOAD_FW_CHUNK, 0,
+ FW_CHUNK_SIZE, &stream[i * FW_CHUNK_SIZE]);
+
+ if (ret != SR_OK) {
+ g_free(stream);
+ return ret;
+ }
+ }
+
+ if (m != 0) {
+ /* upload firmware last chunk */
+ ret = la_write_cmd_buf(usb, CMD_UPLOAD_FW_CHUNK, 0, m,
+ &stream[n * FW_CHUNK_SIZE]);
+
+ if (ret != SR_OK) {
+ g_free(stream);
+ return ret;
+ }
+ }
+
+ g_free(stream);
+
+ la_cfg_fpga_done(usb, 4000);
+
+ sla5032_write_reg14_zero(usb);
+
+ sr_dbg("FPGA bitstream download of %d bytes done.", length);
+
+ return SR_OK;
+}
+
+/* Select and transfer FPGA bitstream for the current configuration. */
+SR_PRIV int sla5032_apply_fpga_config(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ struct drv_context *drvc;
+ int ret;
+ gboolean is_configured;
+
+ devc = sdi->priv;
+ drvc = sdi->driver->context;
+
+ if (FPGA_NOCONF != devc->active_fpga_config)
+ return SR_OK; /* No change. */
+
+ is_configured = FALSE;
+ ret = sla5032_is_configured(sdi->conn, &is_configured);
+ if (ret != SR_OK)
+ return ret;
+
+ if (is_configured) {
+ devc->active_fpga_config = FPGA_CONF;
+ return ret;
+ }
+
+ sr_dbg("FPGA not configured, send bitstream.");
+ ret = sla5032_send_bitstream(drvc->sr_ctx, sdi->conn, BITSTREAM_NAME);
+ devc->active_fpga_config = (ret == SR_OK) ? FPGA_CONF : FPGA_NOCONF;
+
+ return ret;
+}
/* Callback handling data */
static int la_prepare_data(int fd, int revents, void *cb_data)
STATE_READ_REQUEST,
};
+/** SLA5032 protocol command ID codes. */
+enum command_id {
+ CMD_INIT_FW_UPLOAD = 1,
+ CMD_UPLOAD_FW_CHUNK = 2,
+ CMD_READ_REG = 3,
+ CMD_WRITE_REG = 4,
+ CMD_READ_MEM = 5,
+ CMD_READ_DATA = 7,
+};
+
+struct sr_usb_dev_inst;
+
struct dev_context {
uint64_t samplerate; /* requested samplerate */
uint64_t limit_samples; /* requested capture length (samples) */
SR_PRIV int la_start_acquisition(const struct sr_dev_inst *sdi);
+SR_PRIV int sla5032_apply_fpga_config(const struct sr_dev_inst* sdi);
+SR_PRIV int sla5032_start_sample(const struct sr_usb_dev_inst *usb);
+SR_PRIV int sla5032_get_status(const struct sr_usb_dev_inst *usb, uint32_t status[3]);
+SR_PRIV int sla5032_set_read_back(const struct sr_usb_dev_inst *usb);
+SR_PRIV int sla5032_read_data_chunk(const struct sr_usb_dev_inst *usb, void *buf, unsigned int len, int *xfer_len);
+SR_PRIV int sla5032_set_depth(const struct sr_usb_dev_inst *usb, uint32_t pre, uint32_t post);
+SR_PRIV int sla5032_set_triggers(const struct sr_usb_dev_inst *usb, uint32_t trg_value, uint32_t trg_edge_mask, uint32_t trg_mask);
+SR_PRIV int sla5032_set_samplerate(const struct sr_usb_dev_inst *usb, unsigned int sr);
+SR_PRIV int sla5032_set_pwm1(const struct sr_usb_dev_inst *usb, uint32_t hi, uint32_t lo);
+SR_PRIV int sla5032_set_pwm2(const struct sr_usb_dev_inst* usb, uint32_t hi, uint32_t lo);
+SR_PRIV int sla5032_write_reg14_zero(const struct sr_usb_dev_inst* usb);
+
#endif
+++ /dev/null
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2019 Vitaliy Vorobyov
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <config.h>
-#include "sla5032.h"
-#include "protocol.h"
-
-/*
- * Register description (all registers are 32bit):
- *
- * Rx - means register with index x (register address is x*4)
- *
- * R0(wr): trigger sel0 (low/high)
- * R0(rd): n*256 samples (post trigger) captured
- *
- * R1(wr): trigger sel1 (level/edge)
- * R1(rd): current sampled value
- *
- * R2(wr): trigger enable mask
- *
- * R2(rd): (status register)
- * b0: 1 - keys entered
- * b1: 1 - triggered
- * b3: 1 - capture done
- *
- * not configured: B6FF9C97, 12FF9C97, 92FF9C97, 16FF9C97, ...
- * configured: A5A5A5A0, after enter keys A5A5A5A1
- *
- * sel1 (one bit per channel):
- * 0 - level triggered
- * 1 - edge triggered
- *
- * sel0 (one bit per channel):
- * 0 - (low level trigger, sel1=0), (falling edge, sel1=1)
- * 1 - (high level trigger, sel1=0), (raising edge, sel1=1)
- *
- * mask (one bit per channel):
- * 0 - disable trigger on channel n
- * 1 - enable trigger on channel n
- *
- * R3: upload base address or num samples (0x300000)
- *
- * R4: pll divisor - 1
- * 0 - div 1 (no division)
- * 1 - div 2
- * 2 - div 3
- * ...
- * n-1 - div n
- *
- * R5(rd/wr):
- * b0: 1 - enable pll mul 2, 0 - disable pll mul 2
- * b1: ??
- * b2: ??
- * b3: ??
- * b4:
- * b5: ->0->1 upload next data chunk (to pc)
- * b6: ??
- * b7: 0 - enable pll mul 1.25, 1 - disable pll mul 1.25
- * b8: ??
- *
- * R6: post trigger depth, value x means (x+1)*256 (samples), min value is 1
- * R7: pre trigger depth, value y means (y+1)*256 (samples), min value is 1
- * (x+1)*256 + (y+1)*256 <= 64M
- *
- * R9: PWM1 HI (1 width-1)
- * R10: PWM1 LO (0 width-1)
- *
- * R11: PWM2 HI (1 width-1)
- * R12: PWM2 LO (0 width-1)
- *
- * R14:
- * 1 - start sample?
- * 0 - upload done?
- *
- * R16: rom key 0
- * R17: rom key 1
- *
- * key0 is F6 81 13 64
- * key1 is 00 00 00 00
- *
- * start sample:
- * r5 <= b2 <= 0
- * r5 <= b3 <= 0
- * r5 <= b5 <= 0
- *
- * r5 <= b6 <= 1
- * r5 <= b1 <= 1
- * r5 <= b1 <= 0
- *
- * r5 <= b8 <= 1
- * r5 <= b8 <= 0
- *
- * r5 <= b6 <= 1
- * r5 <= b2 <= 1
- *
- * read back:
- * r5 <= 0x08 (b3)
- * r5 <= 0x28 (b5,b3)
- */
-
-#define BITSTREAM_NAME "sysclk-sla5032.bit"
-#define BITSTREAM_MAX_SIZE (512 * 1024) /* Bitstream size limit for safety */
-#define BITSTREAM_HEADER_SIZE 0x69
-#define FW_CHUNK_SIZE 250
-#define XILINX_SYNC_WORD 0xAA995566
-
-static int la_write_cmd_buf(const struct sr_usb_dev_inst *usb, uint8_t cmd,
- unsigned int addr, unsigned int len, const void *data)
-{
- uint8_t *cmd_pkt;
- int ret, xfer_len;
- int cmd_len;
-
- cmd_pkt = g_try_malloc(len + 10);
- if (!cmd_pkt) {
- ret = SR_ERR_MALLOC;
- goto exit;
- }
-
- cmd_pkt[0] = cmd;
- cmd_len = 1;
- xfer_len = 0;
-
- switch(cmd) {
- case CMD_INIT_FW_UPLOAD: /* init firmware upload */
- break;
- case CMD_UPLOAD_FW_CHUNK:
- cmd_pkt[1] = len;
- cmd_len += 1 + len;
- memcpy(&cmd_pkt[2], data, len);
- break;
- case CMD_READ_REG: /* read register */
- cmd_pkt[1] = addr;
- cmd_pkt[2] = len;
- cmd_len += 2;
- break;
- case CMD_WRITE_REG: /* write register */
- cmd_pkt[1] = addr;
- cmd_pkt[2] = len;
- cmd_len += 2 + len;
- memcpy(&cmd_pkt[3], data, len);
- break;
- case CMD_READ_MEM: /* read mem */
- cmd_pkt[1] = (addr >> 8) & 0xFF;
- cmd_pkt[2] = addr & 0xFF;
- cmd_pkt[3] = len;
- cmd_len += 3;
- break;
- case CMD_READ_DATA: /* read samples */
- cmd_pkt[1] = addr;
- cmd_len += 1;
- break;
- }
-
- ret = libusb_bulk_transfer(usb->devhdl, EP_COMMAND, cmd_pkt, cmd_len,
- &xfer_len, USB_CMD_TIMEOUT_MS);
- if (ret != 0) {
- sr_dbg("Failed to send command %d: %s.",
- cmd, libusb_error_name(ret));
- return SR_ERR;
- }
-
- if (xfer_len != cmd_len) {
- sr_dbg("Invalid send command response of length %d.", xfer_len);
- return SR_ERR;
- }
-
-exit:
- g_free(cmd_pkt);
- return ret;
-}
-
-static int la_read_reg(const struct sr_usb_dev_inst *usb, unsigned int reg, uint32_t *val)
-{
- int ret, xfer_len;
- uint32_t reply;
-
- ret = la_write_cmd_buf(usb, CMD_READ_REG, reg * sizeof(uint32_t),
- sizeof(reply), NULL); /* rd reg */
- if (ret != SR_OK)
- return ret;
-
- ret = libusb_bulk_transfer(usb->devhdl, EP_REPLY, (uint8_t *)&reply,
- sizeof(reply), &xfer_len, USB_REPLY_TIMEOUT_MS);
- if (ret != SR_OK)
- return ret;
-
- if (xfer_len != sizeof(uint32_t)) {
- sr_dbg("Invalid register read response of length %d.", xfer_len);
- return SR_ERR;
- }
-
- *val = GUINT32_FROM_BE(reply);
-
- return ret;
-}
-
-static int la_write_reg(const struct sr_usb_dev_inst *usb, unsigned int reg, uint32_t val)
-{
- uint32_t val_be;
-
- val_be = GUINT32_TO_BE(val);
-
- return la_write_cmd_buf(usb, CMD_WRITE_REG, reg * sizeof(uint32_t),
- sizeof(val_be), &val_be); /* wr reg */
-}
-
-static int la_read_mem(const struct sr_usb_dev_inst *usb, unsigned int addr, unsigned int len, void *data)
-{
- int ret, xfer_len;
-
- ret = la_write_cmd_buf(usb, CMD_READ_MEM, addr, len, NULL); /* rd mem */
- if (ret != SR_OK)
- return ret;
-
- xfer_len = 0;
- ret = libusb_bulk_transfer(usb->devhdl, EP_REPLY, (uint8_t *)data,
- len, &xfer_len, USB_REPLY_TIMEOUT_MS);
- if (xfer_len != (int)len) {
- sr_dbg("Invalid memory read response of length %d.", xfer_len);
- return SR_ERR;
- }
-
- return ret;
-}
-
-static int la_read_samples(const struct sr_usb_dev_inst *usb, unsigned int addr)
-{
- return la_write_cmd_buf(usb, CMD_READ_DATA, addr, 0, NULL); /* rd samples */
-}
-
-SR_PRIV int sla5032_set_depth(const struct sr_usb_dev_inst *usb, uint32_t pre, uint32_t post)
-{
- int ret;
-
- /* (pre + 1)*256 + (post + 1)*256 <= 64*1024*1024 */
- ret = la_write_reg(usb, 7, pre);
- if (ret != SR_OK)
- return ret;
-
- return la_write_reg(usb, 6, post);
-}
-
-SR_PRIV int sla5032_set_triggers(const struct sr_usb_dev_inst *usb,
- uint32_t trg_value, uint32_t trg_edge_mask, uint32_t trg_mask)
-{
- int ret;
-
- sr_dbg("set trigger: val: %08X, e_mask: %08X, mask: %08X.", trg_value,
- trg_edge_mask, trg_mask);
-
- ret = la_write_reg(usb, 0, trg_value);
- if (ret != SR_OK)
- return ret;
-
- ret = la_write_reg(usb, 1, trg_edge_mask);
- if (ret != SR_OK)
- return ret;
-
- return la_write_reg(usb, 2, trg_mask);
-}
-
-static int la_set_res_reg_bit(const struct sr_usb_dev_inst *usb,
- unsigned int reg, unsigned int bit, unsigned int set_bit)
-{
- int ret;
- uint32_t v;
-
- v = 0;
- ret = la_read_reg(usb, reg, &v);
- if (ret != SR_OK)
- return ret;
-
- if (set_bit)
- v |= (1u << bit);
- else
- v &= ~(1u << bit);
-
- return la_write_reg(usb, reg, v);
-}
-
-struct pll_tbl_entry_t
-{
- unsigned int sr;
- uint32_t pll_div_minus_1;
- unsigned int pll_mul_flags;
-};
-
-enum {
- PLL_MUL2 = 1, /* x2 */
- PLL_MUL1_25 = 2, /* x1.25 */
-};
-
-static const struct pll_tbl_entry_t pll_tbl[] = {
- { 500000000, 0, PLL_MUL2 | PLL_MUL1_25 }, /* 500M = f*2*1.25/1 */
- { 400000000, 0, PLL_MUL2 }, /* 400M = f*2/1 */
- { 250000000, 0, PLL_MUL1_25 }, /* 250M = f*1.25/1 */
- { 200000000, 0, 0 }, /* 200M = f/1 */
- { 100000000, 1, 0 }, /* 100M = f/2 */
- { 50000000, 3, 0 }, /* 50M = f/4 */
- { 25000000, 7, 0 }, /* 25M = f/8 */
- { 20000000, 9, 0 }, /* 20M = f/10 */
- { 10000000, 19, 0 }, /* 10M = f/20 */
- { 5000000, 39, 0 }, /* 5M = f/40 */
- { 2000000, 99, 0 }, /* 2M = f/100 */
- { 1000000, 199, 0 }, /* 1M = f/200 */
- { 500000, 399, 0 }, /* 500k = f/400 */
- { 200000, 999, 0 }, /* 200k = f/1000 */
- { 100000, 1999, 0 }, /* 100k = f/2000 */
- { 50000, 3999, 0 }, /* 50k = f/4000 */
- { 20000, 9999, 0 }, /* 20k = f/10000 */
- { 10000, 19999, 0 }, /* 10k = f/20000 */
- { 5000, 39999, 0 }, /* 5k = f/40000 */
- { 2000, 99999, 0 }, /* 2k = f/100000 */
-};
-
-SR_PRIV int sla5032_set_samplerate(const struct sr_usb_dev_inst *usb, unsigned int sr)
-{
- int i, ret;
- const struct pll_tbl_entry_t *e;
-
- e = NULL;
- for (i = 0; i < (int)ARRAY_SIZE(pll_tbl); i++) {
- if (sr == pll_tbl[i].sr) {
- e = &pll_tbl[i];
- break;
- }
- }
-
- if (!e)
- return SR_ERR_SAMPLERATE;
-
- sr_dbg("set sample rate: %u.", e->sr);
-
- ret = la_write_reg(usb, 4, e->pll_div_minus_1);
- if (ret != SR_OK)
- return ret;
-
- ret = la_set_res_reg_bit(usb, 5, 0,
- (e->pll_mul_flags & PLL_MUL2) ? 1 : 0); /* bit0 (1=en_mul2) */
- if (ret != SR_OK)
- return ret;
-
- return la_set_res_reg_bit(usb, 5, 7,
- (e->pll_mul_flags & PLL_MUL1_25) ? 0 : 1); /* bit7 (0=en_mul_1.25) */
-}
-
-SR_PRIV int sla5032_start_sample(const struct sr_usb_dev_inst *usb)
-{
- int ret;
- const unsigned int bits[10][2] = {
- {2, 0}, {3, 0}, {5, 0}, {6, 1}, {1, 1},
- {1, 0}, {8, 1}, {8, 0}, {6, 1}, {2, 1},
- };
-
- ret = la_write_reg(usb, 14, 1);
- if (ret != SR_OK)
- return ret;
-
- for (size_t i = 0; i < ARRAY_SIZE(bits); i++) {
- ret = la_set_res_reg_bit(usb, 5, bits[i][0], bits[i][1]);
- if (ret != SR_OK)
- return ret;
- }
-
- return ret;
-}
-
-SR_PRIV int sla5032_get_status(const struct sr_usb_dev_inst *usb, uint32_t status[3])
-{
- int ret;
- uint32_t v;
-
- ret = la_read_reg(usb, 1, &status[0]);
- if (ret != SR_OK)
- return ret;
-
- status[1] = 1; /* wait trigger */
-
- ret = la_read_reg(usb, 0, &status[2]);
- if (ret != SR_OK)
- return ret;
-
- v = 0;
- ret = la_read_reg(usb, 2, &v);
- if (ret != SR_OK)
- return ret;
-
- if (v & 8) {
- status[1] = 3; /* sample done */
- sr_dbg("get status, reg2: %08X.", v);
- } else if (v & 2) {
- status[1] = 2; /* triggered */
- }
-
- return ret;
-}
-
-static int la_read_samples_data(const struct sr_usb_dev_inst *usb, void *buf,
- unsigned int len, int *xfer_len)
-{
- return libusb_bulk_transfer(usb->devhdl, EP_DATA, (uint8_t *)buf, len,
- xfer_len, USB_DATA_TIMEOUT_MS);
-}
-
-SR_PRIV int sla5032_read_data_chunk(const struct sr_usb_dev_inst *usb,
- void *buf, unsigned int len, int *xfer_len)
-{
- int ret;
-
- ret = la_read_samples(usb, 3);
- if (ret != SR_OK)
- return ret;
-
- ret = la_write_reg(usb, 3, 0x300000);
- if (ret != SR_OK)
- return ret;
-
- ret = la_set_res_reg_bit(usb, 5, 4, 0);
- if (ret != SR_OK)
- return ret;
-
- ret = la_set_res_reg_bit(usb, 5, 4, 1);
- if (ret != SR_OK)
- return ret;
-
- return la_read_samples_data(usb, buf, len, xfer_len);
-}
-
-SR_PRIV int sla5032_set_read_back(const struct sr_usb_dev_inst *usb)
-{
- int ret;
-
- ret = la_write_reg(usb, 5, 0x08);
- if (ret != SR_OK)
- return ret;
-
- return la_write_reg(usb, 5, 0x28);
-}
-
-SR_PRIV int sla5032_set_pwm1(const struct sr_usb_dev_inst* usb, uint32_t hi, uint32_t lo)
-{
- int ret;
-
- ret = la_write_reg(usb, 9, hi);
- if (ret != SR_OK)
- return ret;
-
- return la_write_reg(usb, 10, lo);
-}
-
-SR_PRIV int sla5032_set_pwm2(const struct sr_usb_dev_inst* usb, uint32_t hi, uint32_t lo)
-{
- int ret;
-
- ret = la_write_reg(usb, 11, hi);
- if (ret != SR_OK)
- return ret;
-
- return la_write_reg(usb, 12, lo);
-}
-
-SR_PRIV int sla5032_write_reg14_zero(const struct sr_usb_dev_inst* usb)
-{
- return la_write_reg(usb, 14, 0);
-}
-
-static int la_cfg_fpga_done(const struct sr_usb_dev_inst *usb, unsigned int addr)
-{
- uint8_t done_key[8];
- uint32_t k0, k1;
- unsigned int reg2;
- int ret;
-
- memset(done_key, 0, sizeof(done_key));
-
- ret = la_read_mem(usb, addr, sizeof(done_key), done_key); /* read key from eeprom */
- if (ret != SR_OK)
- return ret;
-
- k0 = RL32(done_key); /* 0x641381F6 */
- k1 = RL32(done_key + 4); /* 0x00000000 */
-
- sr_dbg("cfg fpga done, k0: %08X, k1: %08X.", k0, k1);
-
- ret = la_write_reg(usb, 16, k0);
- if (ret != SR_OK)
- return ret;
-
- ret = la_write_reg(usb, 17, k1);
- if (ret != SR_OK)
- return ret;
-
- reg2 = 0;
- ret = la_read_reg(usb, 2, ®2);
-
- sr_dbg("cfg fpga done, reg2: %08X.", reg2);
-
- return ret;
-}
-
-/*
- * Load a bitstream file into memory. Returns a newly allocated array
- * consisting of a 32-bit length field followed by the bitstream data.
- */
-static unsigned char *load_bitstream(struct sr_context *ctx,
- const char *name, int *length_p)
-{
- struct sr_resource fw;
- unsigned char *stream, *fw_data;
- ssize_t length, count;
-
- if (sr_resource_open(ctx, &fw, SR_RESOURCE_FIRMWARE, name) != SR_OK)
- return NULL;
-
- if (fw.size <= BITSTREAM_HEADER_SIZE || fw.size > BITSTREAM_MAX_SIZE) {
- sr_err("Refusing to load bitstream of unreasonable size "
- "(%" PRIu64 " bytes).", fw.size);
- sr_resource_close(ctx, &fw);
- return NULL;
- }
-
- stream = g_try_malloc(fw.size);
- if (!stream) {
- sr_err("Failed to allocate bitstream buffer.");
- sr_resource_close(ctx, &fw);
- return NULL;
- }
-
- count = sr_resource_read(ctx, &fw, stream, fw.size);
- sr_resource_close(ctx, &fw);
-
- if (count != (ssize_t)fw.size) {
- sr_err("Failed to read bitstream '%s'.", name);
- g_free(stream);
- return NULL;
- }
-
- if (RB32(stream + BITSTREAM_HEADER_SIZE) != XILINX_SYNC_WORD) {
- sr_err("Invalid bitstream signature.");
- g_free(stream);
- return NULL;
- }
-
- length = fw.size - BITSTREAM_HEADER_SIZE + 0x100;
- fw_data = g_try_malloc(length);
- if (!fw_data) {
- sr_err("Failed to allocate bitstream aligned buffer.");
- return NULL;
- }
-
- memset(fw_data, 0xFF, 0x100);
- memcpy(fw_data + 0x100, stream + BITSTREAM_HEADER_SIZE,
- fw.size - BITSTREAM_HEADER_SIZE);
- g_free(stream);
-
- *length_p = length;
-
- return fw_data;
-}
-
-static int sla5032_is_configured(const struct sr_usb_dev_inst* usb, gboolean *is_configured)
-{
- int ret;
- uint32_t reg2;
-
- reg2 = 0;
- ret = la_read_reg(usb, 2, ®2);
- if (ret == SR_OK)
- *is_configured = (reg2 & 0xFFFFFFF1) == 0xA5A5A5A1 ? TRUE : FALSE;
-
- return ret;
-}
-
-/* Load a Binary File from the firmware directory, transfer it to the device. */
-static int sla5032_send_bitstream(struct sr_context *ctx,
- const struct sr_usb_dev_inst *usb, const char *name)
-{
- unsigned char *stream;
- int ret, length, i, n, m;
- uint32_t reg2;
-
- if (!ctx || !usb || !name)
- return SR_ERR_BUG;
-
- stream = load_bitstream(ctx, name, &length);
- if (!stream)
- return SR_ERR;
-
- sr_dbg("Downloading FPGA bitstream '%s'.", name);
-
- reg2 = 0;
- ret = la_read_reg(usb, 2, ®2);
- sr_dbg("send bitstream, reg2: %08X.", reg2);
-
- /* Transfer the entire bitstream in one URB. */
- ret = la_write_cmd_buf(usb, CMD_INIT_FW_UPLOAD, 0, 0, NULL); /* init firmware upload */
- if (ret != SR_OK) {
- g_free(stream);
- return ret;
- }
-
- n = length / FW_CHUNK_SIZE;
- m = length % FW_CHUNK_SIZE;
-
- for (i = 0; i < n; i++) {
- /* upload firmware chunk */
- ret = la_write_cmd_buf(usb, CMD_UPLOAD_FW_CHUNK, 0,
- FW_CHUNK_SIZE, &stream[i * FW_CHUNK_SIZE]);
-
- if (ret != SR_OK) {
- g_free(stream);
- return ret;
- }
- }
-
- if (m != 0) {
- /* upload firmware last chunk */
- ret = la_write_cmd_buf(usb, CMD_UPLOAD_FW_CHUNK, 0, m,
- &stream[n * FW_CHUNK_SIZE]);
-
- if (ret != SR_OK) {
- g_free(stream);
- return ret;
- }
- }
-
- g_free(stream);
-
- la_cfg_fpga_done(usb, 4000);
-
- sla5032_write_reg14_zero(usb);
-
- sr_dbg("FPGA bitstream download of %d bytes done.", length);
-
- return SR_OK;
-}
-
-/* Select and transfer FPGA bitstream for the current configuration. */
-SR_PRIV int sla5032_apply_fpga_config(const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- struct drv_context *drvc;
- int ret;
- gboolean is_configured;
-
- devc = sdi->priv;
- drvc = sdi->driver->context;
-
- if (FPGA_NOCONF != devc->active_fpga_config)
- return SR_OK; /* No change. */
-
- is_configured = FALSE;
- ret = sla5032_is_configured(sdi->conn, &is_configured);
- if (ret != SR_OK)
- return ret;
-
- if (is_configured) {
- devc->active_fpga_config = FPGA_CONF;
- return ret;
- }
-
- sr_dbg("FPGA not configured, send bitstream.");
- ret = sla5032_send_bitstream(drvc->sr_ctx, sdi->conn, BITSTREAM_NAME);
- devc->active_fpga_config = (ret == SR_OK) ? FPGA_CONF : FPGA_NOCONF;
-
- return ret;
-}
+++ /dev/null
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2019 Vitaliy Vorobyov
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef LIBSIGROK_HARDWARE_SYSCLK_SLA5032_SLA5032_H
-#define LIBSIGROK_HARDWARE_SYSCLK_SLA5032_SLA5032_H
-
-#include <stdint.h>
-#include <libusb.h>
-#include <glib.h>
-#include <libsigrok/libsigrok.h>
-
-/** SLA5032 protocol command ID codes. */
-enum command_id {
- CMD_INIT_FW_UPLOAD = 1,
- CMD_UPLOAD_FW_CHUNK = 2,
- CMD_READ_REG = 3,
- CMD_WRITE_REG = 4,
- CMD_READ_MEM = 5,
- CMD_READ_DATA = 7,
-};
-
-struct sr_usb_dev_inst;
-
-SR_PRIV int sla5032_apply_fpga_config(const struct sr_dev_inst* sdi);
-SR_PRIV int sla5032_start_sample(const struct sr_usb_dev_inst *usb);
-SR_PRIV int sla5032_get_status(const struct sr_usb_dev_inst *usb, uint32_t status[3]);
-SR_PRIV int sla5032_set_read_back(const struct sr_usb_dev_inst *usb);
-SR_PRIV int sla5032_read_data_chunk(const struct sr_usb_dev_inst *usb, void *buf, unsigned int len, int *xfer_len);
-SR_PRIV int sla5032_set_depth(const struct sr_usb_dev_inst *usb, uint32_t pre, uint32_t post);
-SR_PRIV int sla5032_set_triggers(const struct sr_usb_dev_inst *usb, uint32_t trg_value, uint32_t trg_edge_mask, uint32_t trg_mask);
-SR_PRIV int sla5032_set_samplerate(const struct sr_usb_dev_inst *usb, unsigned int sr);
-SR_PRIV int sla5032_set_pwm1(const struct sr_usb_dev_inst *usb, uint32_t hi, uint32_t lo);
-SR_PRIV int sla5032_set_pwm2(const struct sr_usb_dev_inst* usb, uint32_t hi, uint32_t lo);
-SR_PRIV int sla5032_write_reg14_zero(const struct sr_usb_dev_inst* usb);
-
-#endif
projects / libsigrok.git / commitdiff