* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <stdlib.h>
+#include <glib/gstdio.h>
+
#include "protocol.h"
-SR_PRIV struct sr_dev_driver hameg_hmo_driver_info;
-static struct sr_dev_driver *di = &hameg_hmo_driver_info;
+#define SERIALCOMM "115200/8n1/flow=1"
+
+static const int32_t hwopts[] = {
+ SR_CONF_CONN,
+ SR_CONF_SERIALCOMM,
+};
+
+struct usb_id_info {
+ uint16_t vendor_id;
+ uint16_t product_id;
+} usb_id_info;
+
+static struct usb_id_info ho_models[] = {
+ {
+ .vendor_id = 0x0403,
+ .product_id = 0xed72, /* HO720 */
+ },
+ {
+ .vendor_id = 0x0403,
+ .product_id = 0xed73, /* HO730 */
+ },
+};
static int init(struct sr_context *sr_ctx)
{
return std_init(sr_ctx, di, LOG_PREFIX);
}
+/**
+ * Find USB serial devices via the USB vendor ID and product ID.
+ *
+ * @param vendor_id vendor ID of the USB device.
+ * @param product_id product ID of the USB device.
+ *
+ * @return A GSList of strings containing the path of the serial device or null
+ * if no serial device is found. The returned list must be freed by the caller.
+ */
+static GSList *auto_find_usb(unsigned long vendor_id,
+ unsigned long product_id)
+{
+#ifdef __linux__
+ const gchar *usb_dev;
+ const char device_tree[] = "/sys/bus/usb/devices/";
+
+ GDir *devices_dir;
+
+ GSList *l = NULL;
+ GSList *tty_devices;
+ GSList *matched_paths;
+
+ l = NULL;
+ tty_devices = NULL;
+ matched_paths = NULL;
+
+ if (!(devices_dir = g_dir_open(device_tree, 0, NULL)))
+ return NULL;
+
+ /*
+ * Find potential candidates using the vendor ID and product ID
+ * and store them in matched_paths
+ */
+ while ((usb_dev = g_dir_read_name(devices_dir))) {
+ FILE *fd;
+ char tmp[5];
+
+ gchar *vendor_path;
+ gchar *product_path;
+
+ unsigned long read_vendor_id;
+ unsigned long read_product_id;
+
+ vendor_path = g_strconcat(device_tree,
+ usb_dev, "/idVendor", NULL);
+ product_path = g_strconcat(device_tree,
+ usb_dev, "/idProduct", NULL);
+
+ if (!g_file_test(vendor_path, G_FILE_TEST_EXISTS) ||
+ !g_file_test(product_path, G_FILE_TEST_EXISTS))
+ goto skip_device;
+
+ if ((fd = g_fopen(vendor_path, "r")) == NULL)
+ goto skip_device;
+
+ if (fgets(tmp, sizeof(tmp), fd) == NULL) {
+ fclose(fd);
+ goto skip_device;
+ }
+ read_vendor_id = strtoul(tmp, NULL, 16);
+
+ fclose(fd);
+
+ if ((fd = g_fopen(product_path, "r")) == NULL)
+ goto skip_device;
+
+ if (fgets(tmp, sizeof(tmp), fd) == NULL) {
+ fclose(fd);
+ goto skip_device;
+ }
+ read_product_id = strtoul(tmp, NULL, 16);
+
+ fclose(fd);
+
+ if (vendor_id == read_vendor_id &&
+ product_id == read_product_id) {
+ gchar *path_copy;
+
+ path_copy = g_strdup(usb_dev);
+ matched_paths = g_slist_prepend(matched_paths,
+ path_copy);
+ }
+
+ skip_device:
+ g_free(vendor_path);
+ g_free(product_path);
+ }
+ g_dir_close(devices_dir);
+
+ /* For every matched device try to find a ttyUSBX subfolder */
+ for (l = matched_paths; l; l = l->next) {
+ const char *file;
+
+ GDir *device_dir;
+
+ gchar *prefix;
+ gchar *subdir_path;
+ gchar *device_path;
+
+ subdir_path = NULL;
+
+ device_path = g_strconcat(device_tree, l->data, NULL);
+
+ if (!(device_dir = g_dir_open(device_path, 0, NULL))) {
+ g_free(device_path);
+ continue;
+ }
+
+ prefix = g_strconcat(l->data, ":", NULL);
+
+ while ((file = g_dir_read_name(device_dir))) {
+ if (g_str_has_prefix(file, prefix)) {
+ subdir_path = g_strconcat(device_path,
+ "/", file,
+ NULL);
+ break;
+ }
+ }
+ g_dir_close(device_dir);
+
+ g_free(prefix);
+ g_free(device_path);
+
+ if (subdir_path) {
+ if (!(device_dir = g_dir_open(subdir_path, 0, NULL))) {
+ g_free(subdir_path);
+ continue;
+ }
+ g_free(subdir_path);
+
+ while ((file = g_dir_read_name(device_dir))) {
+ if (g_str_has_prefix(file, "ttyUSB")) {
+ gchar *tty_path;
+
+ tty_path = g_strconcat("/dev/",
+ file, NULL);
+ sr_dbg("Found USB device %04x:%04x attached to %s",
+ vendor_id, product_id, tty_path);
+ tty_devices = g_slist_prepend(tty_devices,
+ tty_path);
+ break;
+ }
+ }
+ g_dir_close(device_dir);
+ }
+ }
+ g_slist_free_full(matched_paths, g_free);
+
+ return tty_devices;
+#else
+ return NULL;
+#endif
+}
+
static GSList *scan(GSList *options)
{
- struct drv_context *drvc;
GSList *devices;
- (void)options;
+ struct drv_context *drvc;
+ struct sr_dev_inst *sdi;
+
+ const char *serial_device;
+ const char *serial_options;
+ serial_device = NULL;
+ serial_options = SERIALCOMM;
+
+ sdi = NULL;
devices = NULL;
drvc = di->priv;
drvc->instances = NULL;
- /* TODO: scan for devices, either based on a SR_CONF_CONN option
- * or on a USB scan. */
+ if (sr_serial_extract_options(options, &serial_device,
+ &serial_options) == SR_OK) {
+ sdi = hameg_probe_serial_device(serial_device, serial_options);
+
+ if (sdi != NULL) {
+ devices = g_slist_append(devices, sdi);
+ drvc->instances = g_slist_append(drvc->instances, sdi);
+ }
+
+ } else {
+ GSList *l;
+ GSList *tty_devices;
+
+ unsigned int i;
+
+ tty_devices = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(ho_models); i++) {
+ if ((l = auto_find_usb(ho_models[i].vendor_id,
+ ho_models[i].product_id)) == NULL)
+ continue;
+
+ tty_devices = g_slist_concat(tty_devices, l);
+ }
+
+ for (l = tty_devices; l; l = l->next) {
+ sdi = hameg_probe_serial_device(l->data, serial_options);
+ if (sdi != NULL) {
+ devices = g_slist_append(devices, sdi);
+ drvc->instances = g_slist_append(drvc->instances, sdi);
+ }
+ }
+
+ g_slist_free_full(tty_devices, g_free);
+ }
return devices;
}
return ((struct drv_context *)(di->priv))->instances;
}
+static void clear_helper(void *priv)
+{
+ unsigned int i;
+
+ struct dev_context *devc;
+ struct scope_config *model;
+
+ devc = priv;
+ model = devc->model_config;
+
+ scope_state_free(devc->model_state);
+
+ for (i = 0; i < model->analog_channels; ++i) {
+ g_slist_free(devc->analog_groups[i].probes);
+ }
+
+ for (i = 0; i < model->digital_pods; ++i) {
+ g_slist_free(devc->digital_groups[i].probes);
+ g_free(devc->digital_groups[i].name);
+ }
+
+ g_free(devc->analog_groups);
+ g_free(devc->digital_groups);
+
+ g_free(devc);
+}
+
static int dev_clear(void)
{
- return std_dev_clear(di, NULL);
+ return std_dev_clear(di, clear_helper);
}
static int dev_open(struct sr_dev_inst *sdi)
{
- (void)sdi;
+ if (sdi->status != SR_ST_ACTIVE &&
+ serial_open(sdi->conn, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
+ return SR_ERR;
- /* TODO: get handle from sdi->conn and open it. */
+ if (scope_state_get(sdi) != SR_OK)
+ return SR_ERR;
sdi->status = SR_ST_ACTIVE;
static int dev_close(struct sr_dev_inst *sdi)
{
- (void)sdi;
+ if (sdi->status == SR_ST_INACTIVE)
+ return SR_OK;
- /* TODO: get handle from sdi->conn and close it. */
+ serial_close(sdi->conn);
sdi->status = SR_ST_INACTIVE;
{
dev_clear();
- /* TODO: free other driver resources, if any. */
-
return SR_OK;
}
-static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi)
+static int check_probe_group(struct dev_context *devc,
+ const struct sr_probe_group *probe_group)
+{
+ unsigned int i;
+ struct scope_config *model;
+
+ model = devc->model_config;
+
+ if (!probe_group)
+ return PG_NONE;
+
+ for (i = 0; i < model->analog_channels; ++i)
+ if (probe_group == &devc->analog_groups[i])
+ return PG_ANALOG;
+
+ for (i = 0; i < model->digital_pods; ++i)
+ if (probe_group == &devc->digital_groups[i])
+ return PG_DIGITAL;
+
+ sr_err("Invalid probe group specified.");
+ return PG_INVALID;
+}
+
+static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group)
{
int ret;
+ int pg_type;
+ unsigned int i;
+
+ struct dev_context *devc;
+ struct scope_config *model;
+
+ if (!sdi || !(devc = sdi->priv))
+ return SR_ERR_ARG;
+
+ if ((pg_type = check_probe_group(devc, probe_group)) == PG_INVALID)
+ return SR_ERR;
- (void)sdi;
- (void)data;
+ ret = SR_ERR_NA;
+ model = devc->model_config;
- ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_NUM_TIMEBASE:
+ *data = g_variant_new_int32(model->num_xdivs);
+ ret = SR_OK;
+ break;
+
+ case SR_CONF_NUM_VDIV:
+ if (pg_type == PG_NONE) {
+ sr_err("No probe group specified.");
+ return SR_ERR_PROBE_GROUP;
+
+ } else if (pg_type == PG_ANALOG) {
+ for (i = 0; i < model->analog_channels; ++i) {
+ if (probe_group == &devc->analog_groups[i]) {
+ *data = g_variant_new_int32(model->num_ydivs);
+ ret = SR_OK;
+ break;
+ }
+ }
+
+ } else {
+ ret = SR_ERR_NA;
+ }
+ break;
+
default:
- return SR_ERR_NA;
+ ret = SR_ERR_NA;
}
return ret;
}
-static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi)
+static GVariant *build_tuples(const uint64_t (*array)[][2], unsigned int n)
+{
+ unsigned int i;
+
+ GVariant *rational[2];
+ GVariantBuilder gvb;
+
+ g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
+
+ for (i = 0; i < n; i++) {
+ rational[0] = g_variant_new_uint64((*array)[i][0]);
+ rational[1] = g_variant_new_uint64((*array)[i][1]);
+
+ /* FIXME valgrind reports a memory leak here */
+ g_variant_builder_add_value(&gvb, g_variant_new_tuple(rational, 2));
+ }
+
+ return g_variant_builder_end(&gvb);
+}
+
+static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group)
{
int ret;
+ int pg_type;
+ unsigned int i;
+ char command[MAX_COMMAND_SIZE];
- (void)data;
+ struct dev_context *devc;
+ struct scope_config *model;
+ struct scope_state *state;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
+ if (!sdi || !(devc = sdi->priv))
+ return SR_ERR_ARG;
+
+ if ((pg_type = check_probe_group(devc, probe_group)) == PG_INVALID)
+ return SR_ERR;
+
+ model = devc->model_config;
+ state = devc->model_state;
+
+ ret = SR_ERR_NA;
- ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_LIMIT_FRAMES:
+ devc->frame_limit = g_variant_get_uint64(data);
+ ret = SR_OK;
+ break;
+
+ case SR_CONF_TRIGGER_SOURCE:
+ {
+ const char *tmp;
+
+ tmp = g_variant_get_string(data, NULL);
+
+ for (i = 0; (*model->trigger_sources)[i]; i++) {
+ if (!g_strcmp0(tmp, (*model->trigger_sources)[i])) {
+ state->trigger_source = i;
+
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_TRIGGER_SOURCE],
+ (*model->trigger_sources)[i]);
+
+ ret = sr_scpi_send(sdi->conn, command);
+ break;
+ }
+ }
+ }
+ break;
+
+ case SR_CONF_VDIV:
+ {
+ unsigned int j;
+ uint64_t p, q;
+
+ if (pg_type == PG_NONE) {
+ sr_err("No probe group specified.");
+ return SR_ERR_PROBE_GROUP;
+ }
+
+ g_variant_get(data, "(tt)", &p, &q);
+
+ for (i = 0; i < model->num_vdivs; i++) {
+ if (p == (*model->vdivs)[i][0] &&
+ q == (*model->vdivs)[i][1]){
+ for (j = 1; j <= model->analog_channels; ++j) {
+ if (probe_group == &devc->analog_groups[j - 1]) {
+ state->analog_channels[j-1].vdiv = (float) p / q;
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_VERTICAL_DIV],
+ j, state->analog_channels[j-1].vdiv);
+
+ if (sr_scpi_send(sdi->conn, command) != SR_OK ||
+ sr_scpi_get_opc(sdi->conn) != SR_OK)
+ return SR_ERR;
+
+ break;
+ }
+ }
+
+ ret = SR_OK;
+ break;
+ }
+ }
+ }
+ break;
+
+ case SR_CONF_TIMEBASE:
+ {
+ uint64_t p, q;
+
+ g_variant_get(data, "(tt)", &p, &q);
+
+ for (i = 0; i < model->num_timebases; i++) {
+ if (p == (*model->timebases)[i][0] &&
+ q == (*model->timebases)[i][1]){
+ state->timebase = (float) p / q;
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_TIMEBASE],
+ state->timebase);
+
+ ret = sr_scpi_send(sdi->conn, command);
+ break;
+ }
+ }
+ }
+ break;
+
+ case SR_CONF_HORIZ_TRIGGERPOS:
+ {
+ double tmp;
+
+ tmp = g_variant_get_double(data);
+
+ if (tmp < 0.0 || tmp > 1.0)
+ return SR_ERR;
+
+ state->horiz_triggerpos = -(tmp - 0.5) * state->timebase * model->num_xdivs;
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_HORIZ_TRIGGERPOS],
+ state->horiz_triggerpos);
+
+ ret = sr_scpi_send(sdi->conn, command);
+ }
+ break;
+
+ case SR_CONF_TRIGGER_SLOPE:
+ {
+ uint64_t tmp;
+
+ tmp = g_variant_get_uint64(data);
+
+ if (tmp != 0 && tmp != 1)
+ return SR_ERR;
+
+ state->trigger_slope = tmp;
+
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_TRIGGER_SLOPE],
+ tmp ? "POS" : "NEG");
+
+ ret = sr_scpi_send(sdi->conn, command);
+ }
+ break;
+
+ case SR_CONF_COUPLING:
+ {
+ unsigned int j;
+ const char *tmp;
+
+ if (pg_type == PG_NONE) {
+ sr_err("No probe group specified.");
+ return SR_ERR_PROBE_GROUP;
+ }
+
+ tmp = g_variant_get_string(data, NULL);
+
+ for (i = 0; (*model->coupling_options)[i]; i++) {
+ if (!strcmp(tmp, (*model->coupling_options)[i])) {
+ for (j = 1; j <= model->analog_channels; ++j) {
+ if (probe_group == &devc->analog_groups[j - 1]) {
+ state->analog_channels[j-1].coupling = i;
+
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_COUPLING],
+ j, tmp);
+
+ if (sr_scpi_send(sdi->conn, command) != SR_OK ||
+ sr_scpi_get_opc(sdi->conn) != SR_OK)
+ return SR_ERR;
+ break;
+ }
+ }
+
+ ret = SR_OK;
+ break;
+ }
+ }
+ }
+ break;
+
default:
ret = SR_ERR_NA;
+ break;
}
+ if (ret == SR_OK)
+ ret = sr_scpi_get_opc(sdi->conn);
+
return ret;
}
-static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
+static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group)
{
- int ret;
+ int pg_type;
+
+ struct dev_context *devc;
+ struct scope_config *model;
+
+ if (!sdi || !(devc = sdi->priv))
+ return SR_ERR_ARG;
- (void)sdi;
- (void)data;
+ if ((pg_type = check_probe_group(devc, probe_group)) == PG_INVALID)
+ return SR_ERR;
+
+ model = devc->model_config;
- ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_DEVICE_OPTIONS:
+ if (pg_type == PG_NONE) {
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ model->hw_caps,
+ model->num_hwcaps,
+ sizeof(int32_t));
+ } else if (pg_type == PG_ANALOG) {
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ model->analog_hwcaps,
+ model->num_analog_hwcaps,
+ sizeof(int32_t));
+ } else {
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ NULL, 0, sizeof(int32_t));
+ }
+ break;
+
+ case SR_CONF_COUPLING:
+ if (pg_type == PG_NONE)
+ return SR_ERR_PROBE_GROUP;
+
+ *data = g_variant_new_strv(*model->coupling_options,
+ g_strv_length((char **) *model->coupling_options));
+ break;
+
+ case SR_CONF_TRIGGER_SOURCE:
+ *data = g_variant_new_strv(*model->trigger_sources,
+ g_strv_length((char **) *model->trigger_sources));
+ break;
+
+ case SR_CONF_TIMEBASE:
+ *data = build_tuples(model->timebases, model->num_timebases);
+ break;
+
+ case SR_CONF_VDIV:
+ if (pg_type == PG_NONE)
+ return SR_ERR_PROBE_GROUP;
+
+ *data = build_tuples(model->vdivs, model->num_vdivs);
+ break;
+
default:
return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
-static int dev_acquisition_start(const struct sr_dev_inst *sdi,
- void *cb_data)
+SR_PRIV int hmo_request_data(const struct sr_dev_inst *sdi)
{
- (void)sdi;
- (void)cb_data;
+ char command[MAX_COMMAND_SIZE];
+
+ struct sr_probe *probe;
+ struct dev_context *devc;
+ struct scope_config *model;
+
+ devc = sdi->priv;
+ model = devc->model_config;
+
+ probe = devc->current_probe->data;
+
+ switch (probe->type) {
+ case SR_PROBE_ANALOG:
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_GET_ANALOG_DATA],
+ probe->index + 1);
+ break;
+ case SR_PROBE_LOGIC:
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_GET_DIG_DATA],
+ probe->index < 8 ? 1 : 2);
+ break;
+ default:
+ sr_err("Invalid probe type");
+ break;
+ }
+
+ return sr_scpi_send(sdi->conn, command);
+}
+
+static int hmo_check_probes(GSList *probes)
+{
+ GSList *l;
+ gboolean enabled_pod1;
+ gboolean enabled_pod2;
+ gboolean enabled_chan3;
+ gboolean enabled_chan4;
+
+ struct sr_probe *probe;
+
+ enabled_pod1 = FALSE;
+ enabled_pod2 = FALSE;
+ enabled_chan3 = FALSE;
+ enabled_chan4 = FALSE;
+
+ for (l = probes; l; l = l->next) {
+ probe = l->data;
+
+ switch (probe->type) {
+ case SR_PROBE_ANALOG:
+ if (probe->index == 2)
+ enabled_chan3 = TRUE;
+ else if (probe->index == 3)
+ enabled_chan4 = TRUE;
+ break;
+
+ case SR_PROBE_LOGIC:
+ if (probe->index < 8)
+ enabled_pod1 = TRUE;
+ else
+ enabled_pod2 = TRUE;
+ break;
+
+ default:
+ return SR_ERR;
+ }
+ }
+
+ if ((enabled_pod1 && enabled_chan3) ||
+ (enabled_pod2 && enabled_chan4))
+ return SR_ERR;
+
+ return SR_OK;
+}
+
+static int hmo_setup_probes(const struct sr_dev_inst *sdi)
+{
+ GSList *l;
+ unsigned int i;
+ gboolean *pod_enabled;
+ char command[MAX_COMMAND_SIZE];
+
+ struct scope_state *state;
+ struct scope_config *model;
+
+ struct sr_probe *probe;
+ struct dev_context *devc;
+ struct sr_serial_dev_inst *serial;
+
+ devc = sdi->priv;
+ serial = sdi->conn;
+ state = devc->model_state;
+ model = devc->model_config;
+
+ pod_enabled = g_try_malloc0(sizeof(gboolean) * model->digital_pods);
+
+ for (l = sdi->probes; l; l = l->next) {
+ probe = l->data;
+
+ switch (probe->type) {
+ case SR_PROBE_ANALOG:
+ {
+ if (probe->enabled != state->analog_channels[probe->index].state) {
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_ANALOG_CHAN_STATE],
+ probe->index + 1, probe->enabled);
+
+ if (sr_scpi_send(serial, command) != SR_OK)
+ return SR_ERR;
+ state->analog_channels[probe->index].state = probe->enabled;
+ }
+ }
+ break;
+
+ case SR_PROBE_LOGIC:
+ {
+ /*
+ * A digital POD needs to be enabled for every group of
+ * 8 probes.
+ */
+ if (probe->enabled)
+ pod_enabled[probe->index < 8 ? 0 : 1] = TRUE;
+
+ if (probe->enabled != state->digital_channels[probe->index]) {
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_DIG_CHAN_STATE],
+ probe->index, probe->enabled);
+
+ if (sr_scpi_send(serial, command) != SR_OK)
+ return SR_ERR;
+
+ state->digital_channels[probe->index] = probe->enabled;
+ }
+ }
+ break;
+
+ default:
+ return SR_ERR;
+ }
+ }
+
+ for (i = 1; i <= model->digital_pods; ++i) {
+ if (state->digital_pods[i-1] != pod_enabled[i-1]) {
+ g_snprintf(command, sizeof(command),
+ (*model->scpi_dialect)[SCPI_CMD_SET_DIG_POD_STATE],
+ i, pod_enabled[i-1]);
+
+ if (sr_scpi_send(serial, command) != SR_OK)
+ return SR_ERR;
+
+ state->digital_pods[i-1] = pod_enabled[i-1];
+ }
+ }
+
+ g_free(pod_enabled);
+
+ return SR_OK;
+}
+
+static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
+{
+ GSList *l;
+ gboolean digital_added;
+
+ struct sr_probe *probe;
+ struct dev_context *devc;
+ struct sr_serial_dev_inst *serial;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
- /* TODO: configure hardware, reset acquisition state, set up
- * callbacks and send header packet. */
+ serial = sdi->conn;
+ devc = sdi->priv;
+ digital_added = FALSE;
+
+ for (l = sdi->probes; l; l = l->next) {
+ probe = l->data;
+
+ if (probe->enabled) {
+ /* Only add a single digital probe */
+ if (probe->type != SR_PROBE_LOGIC || !digital_added) {
+ devc->enabled_probes = g_slist_append(devc->enabled_probes,
+ probe);
+ if (probe->type == SR_PROBE_LOGIC)
+ digital_added = TRUE;
+ }
+ }
+ }
- return SR_OK;
+ if (!devc->enabled_probes)
+ return SR_ERR;
+
+ if (hmo_check_probes(devc->enabled_probes) != SR_OK) {
+ sr_err("Invalid probe configuration specified!");
+ return SR_ERR_NA;
+ }
+
+ if (hmo_setup_probes(sdi) != SR_OK) {
+ sr_err("Failed to setup probe configuration!");
+ return SR_ERR;
+ }
+
+ sr_source_add(serial->fd, G_IO_IN, 50, hameg_hmo_receive_data, (void *)sdi);
+
+ /* Send header packet to the session bus. */
+ std_session_send_df_header(cb_data, LOG_PREFIX);
+
+ devc->current_probe = devc->enabled_probes;
+
+ return hmo_request_data(sdi);
}
static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
+ struct dev_context *devc;
+ struct sr_serial_dev_inst *serial;
+
(void)cb_data;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
- /* TODO: stop acquisition. */
+ devc = sdi->priv;
+
+ g_slist_free(devc->enabled_probes);
+ devc->enabled_probes = NULL;
+ serial = sdi->conn;
+ sr_source_remove(serial->fd);
return SR_OK;
}
#include "protocol.h"
+static const char *manufacturers[] = {
+ "HAMEG",
+};
+
+static const char *hameg_scpi_dialect[] = {
+ [SCPI_CMD_GET_DIG_DATA] = ":POD%d:DATA?",
+ [SCPI_CMD_GET_TIMEBASE] = ":TIM:SCAL?",
+ [SCPI_CMD_SET_TIMEBASE] = ":TIM:SCAL %E",
+ [SCPI_CMD_GET_COUPLING] = ":CHAN%d:COUP?",
+ [SCPI_CMD_SET_COUPLING] = ":CHAN%d:COUP %s",
+ [SCPI_CMD_GET_ANALOG_DATA] = ":CHAN%d:DATA?",
+ [SCPI_CMD_GET_VERTICAL_DIV] = ":CHAN%d:SCAL?",
+ [SCPI_CMD_SET_VERTICAL_DIV] = ":CHAN%d:SCAL %E",
+ [SCPI_CMD_GET_DIG_POD_STATE] = ":POD%d:STAT?",
+ [SCPI_CMD_SET_DIG_POD_STATE] = ":POD%d:STAT %d",
+ [SCPI_CMD_GET_TRIGGER_SLOPE] = ":TRIG:A:EDGE:SLOP?",
+ [SCPI_CMD_SET_TRIGGER_SLOPE] = ":TRIG:A:EDGE:SLOP %s",
+ [SCPI_CMD_GET_TRIGGER_SOURCE] = ":TRIG:A:SOUR?",
+ [SCPI_CMD_SET_TRIGGER_SOURCE] = ":TRIG:A:SOUR %s",
+ [SCPI_CMD_GET_DIG_CHAN_STATE] = ":LOG%d:STAT?",
+ [SCPI_CMD_SET_DIG_CHAN_STATE] = ":LOG%d:STAT %d",
+ [SCPI_CMD_GET_VERTICAL_OFFSET] = ":CHAN%d:POS?",
+ [SCPI_CMD_GET_HORIZ_TRIGGERPOS] = ":TIM:POS?",
+ [SCPI_CMD_SET_HORIZ_TRIGGERPOS] = ":TIM:POS %E",
+ [SCPI_CMD_GET_ANALOG_CHAN_STATE] = ":CHAN%d:STAT?",
+ [SCPI_CMD_SET_ANALOG_CHAN_STATE] = ":CHAN%d:STAT %d",
+};
+
+static const int32_t hmo_hwcaps[] = {
+ SR_CONF_OSCILLOSCOPE,
+ SR_CONF_TRIGGER_SOURCE,
+ SR_CONF_TIMEBASE,
+ SR_CONF_NUM_TIMEBASE,
+ SR_CONF_TRIGGER_SLOPE,
+ SR_CONF_HORIZ_TRIGGERPOS,
+};
+
+static const int32_t hmo_analog_caps[] = {
+ SR_CONF_NUM_VDIV,
+ SR_CONF_COUPLING,
+ SR_CONF_VDIV,
+};
+
+static const char *hmo_coupling_options[] = {
+ "AC",
+ "ACL",
+ "DC",
+ "GND",
+ NULL,
+};
+
+static const char *scope_trigger_slopes[] = {
+ "POS",
+ "NEG",
+ NULL,
+};
+
+static const char *hmo_compact2_trigger_sources[] = {
+ "CH1",
+ "CH2",
+ "LINE",
+ "EXT",
+ "D0",
+ "D1",
+ "D2",
+ "D3",
+ "D4",
+ "D5",
+ "D6",
+ "D7",
+ NULL,
+};
+
+static const char *hmo_compact4_trigger_sources[] = {
+ "CH1",
+ "CH2",
+ "CH3",
+ "CH4",
+ "LINE",
+ "EXT",
+ "D0",
+ "D1",
+ "D2",
+ "D3",
+ "D4",
+ "D5",
+ "D6",
+ "D7",
+ NULL,
+};
+
+static const uint64_t hmo_timebases[][2] = {
+ /* nanoseconds */
+ { 2, 1000000000 },
+ { 5, 1000000000 },
+ { 10, 1000000000 },
+ { 20, 1000000000 },
+ { 50, 1000000000 },
+ { 100, 1000000000 },
+ { 200, 1000000000 },
+ { 500, 1000000000 },
+ /* microseconds */
+ { 1, 1000000 },
+ { 2, 1000000 },
+ { 5, 1000000 },
+ { 10, 1000000 },
+ { 20, 1000000 },
+ { 50, 1000000 },
+ { 100, 1000000 },
+ { 200, 1000000 },
+ { 500, 1000000 },
+ /* milliseconds */
+ { 1, 1000 },
+ { 2, 1000 },
+ { 5, 1000 },
+ { 10, 1000 },
+ { 20, 1000 },
+ { 50, 1000 },
+ { 100, 1000 },
+ { 200, 1000 },
+ { 500, 1000 },
+ /* seconds */
+ { 1, 1 },
+ { 2, 1 },
+ { 5, 1 },
+ { 10, 1 },
+ { 20, 1 },
+ { 50, 1 },
+};
+
+static const uint64_t hmo_vdivs[][2] = {
+ /* millivolts */
+ { 1, 1000 },
+ { 2, 1000 },
+ { 5, 1000 },
+ { 10, 1000 },
+ { 20, 1000 },
+ { 50, 1000 },
+ { 100, 1000 },
+ { 200, 1000 },
+ { 500, 1000 },
+ /* volts */
+ { 1, 1 },
+ { 2, 1 },
+ { 5, 1 },
+ { 10, 1 },
+};
+
+static const char *scope_analog_probe_names[] = {
+ "CH1",
+ "CH2",
+ "CH3",
+ "CH4",
+};
+
+static const char *scope_digital_probe_names[] = {
+ "D0",
+ "D1",
+ "D2",
+ "D3",
+ "D4",
+ "D5",
+ "D6",
+ "D7",
+ "D8",
+ "D9",
+ "D10",
+ "D11",
+ "D12",
+ "D13",
+ "D14",
+ "D15",
+};
+
+static struct scope_config scope_models[] = {
+ {
+ .name = {"HMO722", "HMO1022", "HMO1522", "HMO2022", NULL},
+ .analog_channels = 2,
+ .digital_channels = 8,
+ .digital_pods = 1,
+
+ .analog_names = &scope_analog_probe_names,
+ .digital_names = &scope_digital_probe_names,
+
+ .hw_caps = &hmo_hwcaps,
+ .num_hwcaps = ARRAY_SIZE(hmo_hwcaps),
+
+ .analog_hwcaps = &hmo_analog_caps,
+ .num_analog_hwcaps = ARRAY_SIZE(hmo_analog_caps),
+
+ .coupling_options = &hmo_coupling_options,
+ .trigger_sources = &hmo_compact2_trigger_sources,
+ .trigger_slopes = &scope_trigger_slopes,
+
+ .timebases = &hmo_timebases,
+ .num_timebases = ARRAY_SIZE(hmo_timebases),
+
+ .vdivs = &hmo_vdivs,
+ .num_vdivs = ARRAY_SIZE(hmo_vdivs),
+
+ .num_xdivs = 12,
+ .num_ydivs = 8,
+
+ .scpi_dialect = &hameg_scpi_dialect,
+ },
+ {
+ .name = {"HMO724", "HMO1024", "HMO1524", "HMO2024", NULL},
+ .analog_channels = 4,
+ .digital_channels = 8,
+ .digital_pods = 1,
+
+ .analog_names = &scope_analog_probe_names,
+ .digital_names = &scope_digital_probe_names,
+
+ .hw_caps = &hmo_hwcaps,
+ .num_hwcaps = ARRAY_SIZE(hmo_hwcaps),
+
+ .analog_hwcaps = &hmo_analog_caps,
+ .num_analog_hwcaps = ARRAY_SIZE(hmo_analog_caps),
+
+ .coupling_options = &hmo_coupling_options,
+ .trigger_sources = &hmo_compact4_trigger_sources,
+ .trigger_slopes = &scope_trigger_slopes,
+
+ .timebases = &hmo_timebases,
+ .num_timebases = ARRAY_SIZE(hmo_timebases),
+
+ .vdivs = &hmo_vdivs,
+ .num_vdivs = ARRAY_SIZE(hmo_vdivs),
+
+ .num_xdivs = 12,
+ .num_ydivs = 8,
+
+ .scpi_dialect = &hameg_scpi_dialect,
+ },
+};
+
+static int check_manufacturer(const char *manufacturer)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(manufacturers); ++i)
+ if (strcmp(manufacturer, manufacturers[i]) == 0)
+ return SR_OK;
+
+ return SR_ERR;
+}
+
+static void scope_state_dump(struct scope_config *config,
+ struct scope_state *state)
+{
+ unsigned int i;
+
+ for (i = 0; i < config->analog_channels; ++i) {
+ sr_info("State of analog channel %d -> %s : %s %.3eV %.3e offset", i+1,
+ state->analog_channels[i].state ? "On" : "Off",
+ (*config->coupling_options)[state->analog_channels[i].coupling],
+ state->analog_channels[i].vdiv, state->analog_channels[i].vertical_offset);
+ }
+
+ for (i = 0; i < config->digital_channels; ++i) {
+ sr_info("State of digital channel %d -> %s", i,
+ state->digital_channels[i] ? "On" : "Off");
+ }
+
+ for (i = 0; i < config->digital_pods; ++i) {
+ sr_info("State of digital POD %d -> %s", i,
+ state->digital_pods[i] ? "On" : "Off");
+ }
+
+ sr_info("Current timebase: %.2es", state->timebase);
+ sr_info("Current trigger: %s (source), %s (slope) %.2e (offset)",
+ (*config->trigger_sources)[state->trigger_source],
+ (*config->trigger_slopes)[state->trigger_slope],
+ state->horiz_triggerpos);
+}
+
+static int scope_state_get_array_option(struct sr_serial_dev_inst *serial,
+ const char *command, const char *(*array)[],
+ int *result)
+{
+ char *tmp;
+ unsigned int i;
+
+ if (sr_scpi_get_string(serial, command, &tmp) != SR_OK) {
+ if (tmp)
+ g_free(tmp);
+ return SR_ERR;
+ }
+
+ for (i = 0; (*array)[i]; ++i) {
+ if (!g_strcmp0(tmp, (*array)[i])) {
+ *result = i;
+ g_free(tmp);
+ tmp = NULL;
+ break;
+ }
+ }
+
+ if (tmp) {
+ g_free(tmp);
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+static int analog_channel_state_get(struct sr_serial_dev_inst *serial,
+ struct scope_config *config,
+ struct scope_state *state)
+{
+ unsigned int i;
+ char command[MAX_COMMAND_SIZE];
+
+ for (i = 0; i < config->analog_channels; ++i) {
+ g_snprintf(command, sizeof(command),
+ (*config->scpi_dialect)[SCPI_CMD_GET_ANALOG_CHAN_STATE],
+ i + 1);
+
+ if (sr_scpi_get_bool(serial, command,
+ &state->analog_channels[i].state) != SR_OK)
+ return SR_ERR;
+
+ g_snprintf(command, sizeof(command),
+ (*config->scpi_dialect)[SCPI_CMD_GET_VERTICAL_DIV],
+ i + 1);
+
+ if (sr_scpi_get_float(serial, command,
+ &state->analog_channels[i].vdiv) != SR_OK)
+ return SR_ERR;
+
+ g_snprintf(command, sizeof(command),
+ (*config->scpi_dialect)[SCPI_CMD_GET_VERTICAL_OFFSET],
+ i + 1);
+
+ if (sr_scpi_get_float(serial, command,
+ &state->analog_channels[i].vertical_offset) != SR_OK)
+ return SR_ERR;
+
+ g_snprintf(command, sizeof(command),
+ (*config->scpi_dialect)[SCPI_CMD_GET_COUPLING],
+ i + 1);
+
+ if (scope_state_get_array_option(serial, command, config->coupling_options,
+ &state->analog_channels[i].coupling) != SR_OK)
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+static int digital_channel_state_get(struct sr_serial_dev_inst *serial,
+ struct scope_config *config,
+ struct scope_state *state)
+{
+ unsigned int i;
+ char command[MAX_COMMAND_SIZE];
+
+ for (i = 0; i < config->digital_channels; ++i) {
+ g_snprintf(command, sizeof(command),
+ (*config->scpi_dialect)[SCPI_CMD_GET_DIG_CHAN_STATE],
+ i);
+
+ if (sr_scpi_get_bool(serial, command,
+ &state->digital_channels[i]) != SR_OK)
+ return SR_ERR;
+ }
+
+ for (i = 0; i < config->digital_pods; ++i) {
+ g_snprintf(command, sizeof(command),
+ (*config->scpi_dialect)[SCPI_CMD_GET_DIG_POD_STATE],
+ i + 1);
+
+ if (sr_scpi_get_bool(serial, command,
+ &state->digital_pods[i]) != SR_OK)
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int scope_state_get(struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ struct scope_state *state;
+ struct scope_config *config;
+
+ devc = sdi->priv;
+ config = devc->model_config;
+ state = devc->model_state;
+
+ if (analog_channel_state_get(sdi->conn, config, state) != SR_OK)
+ return SR_ERR;
+
+ if (digital_channel_state_get(sdi->conn, config, state) != SR_OK)
+ return SR_ERR;
+
+ /* TODO check if value is sensible */
+ if (sr_scpi_get_float(sdi->conn, (*config->scpi_dialect)[SCPI_CMD_GET_TIMEBASE],
+ &state->timebase) != SR_OK)
+ return SR_ERR;
+
+ if (sr_scpi_get_float(sdi->conn, (*config->scpi_dialect)[SCPI_CMD_GET_HORIZ_TRIGGERPOS],
+ &state->horiz_triggerpos) != SR_OK)
+ return SR_ERR;
+
+ if (scope_state_get_array_option(sdi->conn, (*config->scpi_dialect)[SCPI_CMD_GET_TRIGGER_SOURCE],
+ config->trigger_sources, &state->trigger_source) != SR_OK)
+ return SR_ERR;
+
+ if (scope_state_get_array_option(sdi->conn, (*config->scpi_dialect)[SCPI_CMD_GET_TRIGGER_SLOPE],
+ config->trigger_slopes, &state->trigger_slope) != SR_OK)
+ return SR_ERR;
+
+ scope_state_dump(config, state);
+
+ return SR_OK;
+}
+
+SR_PRIV struct scope_state *scope_state_new(struct scope_config *config)
+{
+ struct scope_state *state;
+
+ if (!(state = g_try_malloc0(sizeof(struct scope_state))))
+ return NULL;
+
+ if (!(state->analog_channels = g_try_malloc0_n(config->analog_channels,
+ sizeof(struct analog_channel_state))))
+ goto fail;
+
+ if (!(state->digital_channels = g_try_malloc0_n(config->digital_channels,
+ sizeof(gboolean))))
+ goto fail;
+
+ if (!(state->digital_pods = g_try_malloc0_n(config->digital_pods,
+ sizeof(gboolean))))
+ goto fail;
+
+ return state;
+
+fail:
+ if (state->analog_channels)
+ g_free(state->analog_channels);
+ if (state->digital_channels)
+ g_free(state->digital_channels);
+ if (state->digital_pods)
+ g_free(state->digital_pods);
+ g_free(state);
+
+ return NULL;
+}
+
+SR_PRIV void scope_state_free(struct scope_state *state)
+{
+ g_free(state->analog_channels);
+ g_free(state->digital_channels);
+ g_free(state->digital_pods);
+ g_free(state);
+}
+
+SR_PRIV int hmo_init_device(struct sr_dev_inst *sdi)
+{
+ char tmp[25];
+ int model_index;
+ unsigned int i;
+ unsigned int j;
+
+ struct sr_probe *probe;
+ struct dev_context *devc;
+
+ devc = sdi->priv;
+ model_index = -1;
+
+ /* Find the exact model */
+ for (i = 0; i < ARRAY_SIZE(scope_models); i++) {
+ for (j = 0; scope_models[i].name[j]; j++) {
+ if (!strcmp(sdi->model, scope_models[i].name[j])) {
+ model_index = i;
+ break;
+ }
+ }
+ if (model_index != -1)
+ break;
+ }
+
+ if (model_index == -1) {
+ sr_dbg("Unsupported HMO device");
+ return SR_ERR_NA;
+ }
+
+ if (!(devc->analog_groups = g_try_malloc0(sizeof(struct sr_probe_group) *
+ scope_models[model_index].analog_channels)))
+ return SR_ERR_MALLOC;
+
+ if (!(devc->digital_groups = g_try_malloc0(sizeof(struct sr_probe_group) *
+ scope_models[model_index].digital_pods)))
+ return SR_ERR_MALLOC;
+
+ /* Add analog channels */
+ for (i = 0; i < scope_models[model_index].analog_channels; i++) {
+ if (!(probe = sr_probe_new(i, SR_PROBE_ANALOG, TRUE,
+ (*scope_models[model_index].analog_names)[i])))
+ return SR_ERR_MALLOC;
+ sdi->probes = g_slist_append(sdi->probes, probe);
+
+ devc->analog_groups[i].name = (char *) (*scope_models[model_index].analog_names)[i];
+ devc->analog_groups[i].probes = g_slist_append(NULL, probe);
+
+ sdi->probe_groups = g_slist_append(sdi->probe_groups,
+ &devc->analog_groups[i]);
+ }
+
+ /* Add digital probe groups */
+ for (i = 0; i < scope_models[model_index].digital_pods; ++i) {
+ g_snprintf(tmp, 25, "POD%d", i);
+ devc->digital_groups[i].name = g_strdup(tmp);
+ sdi->probe_groups = g_slist_append(sdi->probe_groups,
+ &devc->digital_groups[i < 8 ? 0 : 1]);
+ }
+
+ /* Add digital channels */
+ for (i = 0; i < scope_models[model_index].digital_channels; i++) {
+ if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
+ (*scope_models[model_index].digital_names)[i])))
+ return SR_ERR_MALLOC;
+ sdi->probes = g_slist_append(sdi->probes, probe);
+
+ devc->digital_groups[i < 8 ? 0 : 1].probes = g_slist_append(devc->digital_groups[i < 8 ? 0 : 1].probes,
+ probe);
+ }
+
+ devc->model_config = &scope_models[model_index];
+ devc->frame_limit = 0;
+
+ if (!(devc->model_state = scope_state_new(devc->model_config)))
+ return SR_ERR_MALLOC;
+
+ return SR_OK;
+}
+
+SR_PRIV struct sr_dev_inst *hameg_probe_serial_device(const char *serial_device,
+ const char *serial_options)
+{
+ struct sr_dev_inst *sdi;
+ struct dev_context *devc;
+ struct sr_scpi_hw_info *hw_info;
+ struct sr_serial_dev_inst *serial;
+
+ sdi = NULL;
+ devc = NULL;
+ serial = NULL;
+ hw_info = NULL;
+
+ if (!(serial = sr_serial_dev_inst_new(serial_device, serial_options)))
+ goto fail;
+
+ sr_info("Probing %s.", serial_device);
+ if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
+ goto fail;
+
+ if (sr_scpi_get_hw_id(serial, &hw_info) != SR_OK) {
+ sr_info("Couldn't get IDN response");
+ goto fail;
+ }
+
+ if (check_manufacturer(hw_info->manufacturer) != SR_OK)
+ goto fail;
+
+ if (!(sdi = sr_dev_inst_new(0, SR_ST_ACTIVE,
+ hw_info->manufacturer, hw_info->model,
+ hw_info->firmware_version))) {
+ goto fail;
+ }
+ sr_scpi_hw_info_free(hw_info);
+ hw_info = NULL;
+
+ if (!(devc = g_try_malloc0(sizeof(struct dev_context))))
+ goto fail;
+
+ sdi->driver = di;
+ sdi->priv = devc;
+ sdi->inst_type = SR_INST_SERIAL;
+ sdi->conn = serial;
+
+ if (hmo_init_device(sdi) != SR_OK)
+ goto fail;
+
+ return sdi;
+
+fail:
+ if (hw_info)
+ sr_scpi_hw_info_free(hw_info);
+ if (serial)
+ sr_serial_dev_inst_free(serial);
+ if (sdi)
+ sr_dev_inst_free(sdi);
+ if (devc)
+ g_free(devc);
+
+ return NULL;
+}
+
SR_PRIV int hameg_hmo_receive_data(int fd, int revents, void *cb_data)
{
- const struct sr_dev_inst *sdi;
+ struct sr_probe *probe;
+ struct sr_dev_inst *sdi;
struct dev_context *devc;
+ struct sr_datafeed_packet packet;
(void)fd;
return TRUE;
if (revents == G_IO_IN) {
- /* TODO */
+ probe = devc->current_probe->data;
+
+ switch (probe->type) {
+ case SR_PROBE_ANALOG:
+ {
+ GArray *data;
+ struct sr_datafeed_analog analog;
+
+ if (sr_scpi_get_floatv(sdi->conn, NULL, &data) != SR_OK) {
+ if (data)
+ g_array_free(data, TRUE);
+
+ return TRUE;
+ }
+
+ packet.type = SR_DF_FRAME_BEGIN;
+ sr_session_send(sdi, &packet);
+
+ analog.probes = g_slist_append(NULL, probe);
+ analog.num_samples = data->len;
+ analog.data = (float *) data->data;
+ analog.mq = SR_MQ_VOLTAGE;
+ analog.unit = SR_UNIT_VOLT;
+ analog.mqflags = 0;
+ packet.type = SR_DF_ANALOG;
+ packet.payload = &analog;
+ sr_session_send(cb_data, &packet);
+ g_slist_free(analog.probes);
+ g_array_free(data, TRUE);
+ }
+ break;
+
+ case SR_PROBE_LOGIC:
+ {
+ GArray *data;
+ struct sr_datafeed_logic logic;
+
+ if (sr_scpi_get_uint8v(sdi->conn, NULL, &data) != SR_OK) {
+ if (data)
+ g_free(data);
+ return TRUE;
+ }
+
+ packet.type = SR_DF_FRAME_BEGIN;
+ sr_session_send(sdi, &packet);
+
+ logic.length = data->len;
+ logic.unitsize = 1;
+ logic.data = data->data;
+ packet.type = SR_DF_LOGIC;
+ packet.payload = &logic;
+ sr_session_send(cb_data, &packet);
+ g_array_free(data, TRUE);
+ }
+ break;
+
+ default:
+ sr_err("Invalid probe type");
+ break;
+ }
+
+ packet.type = SR_DF_FRAME_END;
+ sr_session_send(sdi, &packet);
+
+ if (devc->current_probe->next) {
+ devc->current_probe = devc->current_probe->next;
+ hmo_request_data(sdi);
+ } else if (++devc->num_frames == devc->frame_limit) {
+ packet.type = SR_DF_END;
+ sr_session_send(sdi, &packet);
+ sdi->driver->dev_acquisition_stop(sdi, cb_data);
+ } else {
+ devc->current_probe = devc->enabled_probes;
+ hmo_request_data(sdi);
+ }
}
return TRUE;
projects / libsigrok.git / commitdiff