2 * This file is part of the libsigrok project.
4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #define VENDOR_NAME "ZEROPLUS"
23 #define USB_INTERFACE 0
24 #define USB_CONFIGURATION 1
25 #define NUM_TRIGGER_STAGES 4
26 #define PACKET_SIZE 2048 /* ?? */
28 //#define ZP_EXPERIMENTAL
34 unsigned int channels;
35 unsigned int sample_depth; /* In Ksamples/channel */
36 unsigned int max_sampling_freq;
40 * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the
41 * same 128K sample depth.
43 static const struct zp_model zeroplus_models[] = {
44 {0x0c12, 0x7002, "LAP-16128U", 16, 128, 200},
45 {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100},
46 {0x0c12, 0x700a, "LAP-C(16128)", 16, 128, 200},
47 {0x0c12, 0x700b, "LAP-C(32128)", 32, 128, 200},
48 {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200},
49 {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200},
50 {0x0c12, 0x700e, "LAP-C(16032)", 16, 32, 100},
51 {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200},
52 {0x0c12, 0x7100, "AKIP-9101", 16, 256, 200},
56 static const uint32_t devopts[] = {
57 SR_CONF_LOGIC_ANALYZER,
58 SR_CONF_LIMIT_SAMPLES | SR_CONF_SET | SR_CONF_LIST,
59 SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
60 SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
61 SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
62 SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
65 static const int32_t trigger_matches[] = {
71 * ZEROPLUS LAP-C (16032) numbers the 16 channels A0-A7 and B0-B7.
72 * We currently ignore other untested/unsupported devices here.
74 static const char *channel_names[] = {
75 "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
76 "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7",
77 "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7",
78 "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
82 SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info;
83 static struct sr_dev_driver *di = &zeroplus_logic_cube_driver_info;
86 * The hardware supports more samplerates than these, but these are the
87 * options hardcoded into the vendor's Windows GUI.
90 static const uint64_t samplerates_100[] = {
109 const uint64_t samplerates_200[] = {
130 static int dev_close(struct sr_dev_inst *sdi);
132 SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate)
136 for (i = 0; ARRAY_SIZE(samplerates_200); i++)
137 if (samplerate == samplerates_200[i])
140 if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) {
141 sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate);
145 sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate);
147 if (samplerate >= SR_MHZ(1))
148 analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ);
149 else if (samplerate >= SR_KHZ(1))
150 analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ);
152 analyzer_set_freq(samplerate, FREQ_SCALE_HZ);
154 devc->cur_samplerate = samplerate;
159 static int init(struct sr_context *sr_ctx)
161 return std_init(sr_ctx, di, LOG_PREFIX);
164 static GSList *scan(GSList *options)
166 struct sr_dev_inst *sdi;
167 struct sr_channel *ch;
168 struct drv_context *drvc;
169 struct dev_context *devc;
170 const struct zp_model *prof;
171 struct libusb_device_descriptor des;
172 struct libusb_device_handle *hdl;
173 libusb_device **devlist;
176 char serial_num[64], connection_id[64];
184 /* Find all ZEROPLUS analyzers and add them to device list. */
185 libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */
187 for (i = 0; devlist[i]; i++) {
188 ret = libusb_get_device_descriptor(devlist[i], &des);
190 sr_err("Failed to get device descriptor: %s.",
191 libusb_error_name(ret));
195 if ((ret = libusb_open(devlist[i], &hdl)) < 0)
198 if (des.iSerialNumber == 0) {
199 serial_num[0] = '\0';
200 } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
201 des.iSerialNumber, (unsigned char *) serial_num,
202 sizeof(serial_num))) < 0) {
203 sr_warn("Failed to get serial number string descriptor: %s.",
204 libusb_error_name(ret));
210 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
213 for (j = 0; j < zeroplus_models[j].vid; j++) {
214 if (des.idVendor == zeroplus_models[j].vid &&
215 des.idProduct == zeroplus_models[j].pid) {
216 prof = &zeroplus_models[j];
219 /* Skip if the device was not found. */
222 sr_info("Found ZEROPLUS %s.", prof->model_name);
224 /* Register the device with libsigrok. */
225 if (!(sdi = sr_dev_inst_new(SR_ST_INACTIVE,
226 VENDOR_NAME, prof->model_name, NULL))) {
227 sr_err("%s: sr_dev_inst_new failed", __func__);
231 sdi->serial_num = g_strdup(serial_num);
232 sdi->connection_id = g_strdup(connection_id);
234 /* Allocate memory for our private driver context. */
235 if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
236 sr_err("Device context malloc failed.");
242 devc->num_channels = prof->channels;
243 #ifdef ZP_EXPERIMENTAL
244 devc->max_sample_depth = 128 * 1024;
245 devc->max_samplerate = 200;
247 devc->max_sample_depth = prof->sample_depth * 1024;
248 devc->max_samplerate = prof->max_sampling_freq;
250 devc->max_samplerate *= SR_MHZ(1);
251 devc->memory_size = MEMORY_SIZE_8K;
252 // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES);
254 /* Fill in channellist according to this device's profile. */
255 for (j = 0; j < devc->num_channels; j++) {
256 if (!(ch = sr_channel_new(j, SR_CHANNEL_LOGIC, TRUE,
259 sdi->channels = g_slist_append(sdi->channels, ch);
262 devices = g_slist_append(devices, sdi);
263 drvc->instances = g_slist_append(drvc->instances, sdi);
264 sdi->inst_type = SR_INST_USB;
265 sdi->conn = sr_usb_dev_inst_new(
266 libusb_get_bus_number(devlist[i]),
267 libusb_get_device_address(devlist[i]), NULL);
269 libusb_free_device_list(devlist, 1);
274 static GSList *dev_list(void)
276 return ((struct drv_context *)(di->priv))->instances;
279 static int dev_open(struct sr_dev_inst *sdi)
281 struct dev_context *devc;
282 struct drv_context *drvc;
283 struct sr_usb_dev_inst *usb;
284 libusb_device **devlist, *dev;
285 int device_count, ret, i;
286 char connection_id[64];
291 if (!(devc = sdi->priv)) {
292 sr_err("%s: sdi->priv was NULL", __func__);
296 device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx,
298 if (device_count < 0) {
299 sr_err("Failed to retrieve device list.");
304 for (i = 0; i < device_count; i++) {
305 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
306 if (!strcmp(sdi->connection_id, connection_id)) {
312 sr_err("Device on %d.%d (logical) / %s (physical) disappeared!",
313 usb->bus, usb->address, sdi->connection_id);
317 if (!(ret = libusb_open(dev, &(usb->devhdl)))) {
318 sdi->status = SR_ST_ACTIVE;
319 sr_info("Opened device on %d.%d (logical) / %s (physical) interface %d.",
320 usb->bus, usb->address, sdi->connection_id, USB_INTERFACE);
322 sr_err("Failed to open device: %s.", libusb_error_name(ret));
326 ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION);
328 sr_err("Unable to set USB configuration %d: %s.",
329 USB_CONFIGURATION, libusb_error_name(ret));
333 ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
335 sr_err("Unable to claim interface: %s.",
336 libusb_error_name(ret));
340 /* Set default configuration after power on. */
341 if (analyzer_read_status(usb->devhdl) == 0)
342 analyzer_configure(usb->devhdl);
344 analyzer_reset(usb->devhdl);
345 analyzer_initialize(usb->devhdl);
347 //analyzer_set_memory_size(MEMORY_SIZE_512K);
348 // analyzer_set_freq(g_freq, g_freq_scale);
349 analyzer_set_trigger_count(1);
350 // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger)
351 // * get_memory_size(g_memory_size)) / 100) >> 2);
354 if (g_double_mode == 1)
355 analyzer_set_compression(COMPRESSION_DOUBLE);
356 else if (g_compression == 1)
357 analyzer_set_compression(COMPRESSION_ENABLE);
360 analyzer_set_compression(COMPRESSION_NONE);
362 if (devc->cur_samplerate == 0) {
363 /* Samplerate hasn't been set. Default to 1MHz. */
364 analyzer_set_freq(1, FREQ_SCALE_MHZ);
365 devc->cur_samplerate = SR_MHZ(1);
368 if (devc->cur_threshold == 0)
369 set_voltage_threshold(devc, 1.5);
374 static int dev_close(struct sr_dev_inst *sdi)
376 struct sr_usb_dev_inst *usb;
383 sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.",
384 usb->bus, usb->address, sdi->connection_id, USB_INTERFACE);
385 libusb_release_interface(usb->devhdl, USB_INTERFACE);
386 libusb_reset_device(usb->devhdl);
387 libusb_close(usb->devhdl);
389 sdi->status = SR_ST_INACTIVE;
394 static int cleanup(void)
396 return std_dev_clear(di, NULL);
399 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
400 const struct sr_channel_group *cg)
402 struct dev_context *devc;
407 case SR_CONF_SAMPLERATE:
410 *data = g_variant_new_uint64(devc->cur_samplerate);
411 sr_spew("Returning samplerate: %" PRIu64 "Hz.",
412 devc->cur_samplerate);
416 case SR_CONF_CAPTURE_RATIO:
419 *data = g_variant_new_uint64(devc->capture_ratio);
423 case SR_CONF_VOLTAGE_THRESHOLD:
427 range[0] = g_variant_new_double(devc->cur_threshold);
428 range[1] = g_variant_new_double(devc->cur_threshold);
429 *data = g_variant_new_tuple(range, 2);
440 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
441 const struct sr_channel_group *cg)
443 struct dev_context *devc;
448 if (sdi->status != SR_ST_ACTIVE)
449 return SR_ERR_DEV_CLOSED;
451 if (!(devc = sdi->priv)) {
452 sr_err("%s: sdi->priv was NULL", __func__);
457 case SR_CONF_SAMPLERATE:
458 return zp_set_samplerate(devc, g_variant_get_uint64(data));
459 case SR_CONF_LIMIT_SAMPLES:
460 return set_limit_samples(devc, g_variant_get_uint64(data));
461 case SR_CONF_CAPTURE_RATIO:
462 return set_capture_ratio(devc, g_variant_get_uint64(data));
463 case SR_CONF_VOLTAGE_THRESHOLD:
464 g_variant_get(data, "(dd)", &low, &high);
465 return set_voltage_threshold(devc, (low + high) / 2.0);
473 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
474 const struct sr_channel_group *cg)
476 struct dev_context *devc;
477 GVariant *gvar, *grange[2];
485 case SR_CONF_DEVICE_OPTIONS:
486 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
487 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
489 case SR_CONF_SAMPLERATE:
491 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
492 if (devc->prof->max_sampling_freq == 100) {
493 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
494 samplerates_100, ARRAY_SIZE(samplerates_100),
496 } else if (devc->prof->max_sampling_freq == 200) {
497 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
498 samplerates_200, ARRAY_SIZE(samplerates_200),
501 sr_err("Internal error: Unknown max. samplerate: %d.",
502 devc->prof->max_sampling_freq);
505 g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
506 *data = g_variant_builder_end(&gvb);
508 case SR_CONF_TRIGGER_MATCH:
509 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
510 trigger_matches, ARRAY_SIZE(trigger_matches),
513 case SR_CONF_VOLTAGE_THRESHOLD:
514 g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
515 for (v = -6.0; v <= 6.0; v += 0.1) {
516 range[0] = g_variant_new_double(v);
517 range[1] = g_variant_new_double(v);
518 gvar = g_variant_new_tuple(range, 2);
519 g_variant_builder_add_value(&gvb, gvar);
521 *data = g_variant_builder_end(&gvb);
523 case SR_CONF_LIMIT_SAMPLES:
527 grange[0] = g_variant_new_uint64(0);
528 grange[1] = g_variant_new_uint64(devc->max_sample_depth);
529 *data = g_variant_new_tuple(grange, 2);
538 static int dev_acquisition_start(const struct sr_dev_inst *sdi,
541 struct dev_context *devc;
542 struct sr_usb_dev_inst *usb;
543 struct sr_datafeed_packet packet;
544 struct sr_datafeed_logic logic;
545 unsigned int samples_read;
547 unsigned int packet_num, n;
550 unsigned int stop_address;
551 unsigned int now_address;
552 unsigned int trigger_address;
553 unsigned int trigger_offset;
554 unsigned int triggerbar;
555 unsigned int ramsize_trigger;
556 unsigned int memory_size;
557 unsigned int valid_samples;
558 unsigned int discard;
561 if (sdi->status != SR_ST_ACTIVE)
562 return SR_ERR_DEV_CLOSED;
564 if (!(devc = sdi->priv)) {
565 sr_err("%s: sdi->priv was NULL", __func__);
569 if (analyzer_add_triggers(sdi) != SR_OK) {
570 sr_err("Failed to configure triggers.");
576 set_triggerbar(devc);
578 /* Push configured settings to device. */
579 analyzer_configure(usb->devhdl);
581 analyzer_start(usb->devhdl);
582 sr_info("Waiting for data.");
583 analyzer_wait_data(usb->devhdl);
585 status = analyzer_read_status(usb->devhdl);
586 stop_address = analyzer_get_stop_address(usb->devhdl);
587 now_address = analyzer_get_now_address(usb->devhdl);
588 trigger_address = analyzer_get_trigger_address(usb->devhdl);
590 triggerbar = analyzer_get_triggerbar_address();
591 ramsize_trigger = analyzer_get_ramsize_trigger_address();
593 n = get_memory_size(devc->memory_size);
596 sr_info("Status = 0x%x.", status);
597 sr_info("Stop address = 0x%x.", stop_address);
598 sr_info("Now address = 0x%x.", now_address);
599 sr_info("Trigger address = 0x%x.", trigger_address);
600 sr_info("Triggerbar address = 0x%x.", triggerbar);
601 sr_info("Ramsize trigger = 0x%x.", ramsize_trigger);
602 sr_info("Memory size = 0x%x.", memory_size);
604 /* Send header packet to the session bus. */
605 std_session_send_df_header(cb_data, LOG_PREFIX);
607 /* Check for empty capture */
608 if ((status & STATUS_READY) && !stop_address) {
609 packet.type = SR_DF_END;
610 sr_session_send(cb_data, &packet);
614 if (!(buf = g_try_malloc(PACKET_SIZE))) {
615 sr_err("Packet buffer malloc failed.");
616 return SR_ERR_MALLOC;
619 /* Check if the trigger is in the samples we are throwing away */
620 trigger_now = now_address == trigger_address ||
621 ((now_address + 1) % memory_size) == trigger_address;
624 * STATUS_READY doesn't clear until now_address advances past
625 * addr 0, but for our logic, clear it in that case
628 status &= ~STATUS_READY;
630 analyzer_read_start(usb->devhdl);
632 /* Calculate how much data to discard */
634 if (status & STATUS_READY) {
636 * We haven't wrapped around, we need to throw away data from
637 * our current position to the end of the buffer.
638 * Additionally, the first two samples captured are always
641 discard += memory_size - now_address + 2;
645 /* If we have more samples than we need, discard them */
646 valid_samples = (stop_address - now_address) % memory_size;
647 if (valid_samples > ramsize_trigger + triggerbar) {
648 discard += valid_samples - (ramsize_trigger + triggerbar);
649 now_address += valid_samples - (ramsize_trigger + triggerbar);
652 sr_info("Need to discard %d samples.", discard);
654 /* Calculate how far in the trigger is */
658 trigger_offset = (trigger_address - now_address) % memory_size;
660 /* Recalculate the number of samples available */
661 valid_samples = (stop_address - now_address) % memory_size;
663 /* Send the incoming transfer to the session bus. */
665 for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) {
667 unsigned int buf_offset;
669 res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE);
670 sr_info("Tried to read %d bytes, actually read %d bytes.",
673 if (discard >= PACKET_SIZE / 4) {
674 discard -= PACKET_SIZE / 4;
678 len = PACKET_SIZE - discard * 4;
679 buf_offset = discard * 4;
682 /* Check if we've read all the samples */
683 if (samples_read + len / 4 >= valid_samples)
684 len = (valid_samples - samples_read) * 4;
688 if (samples_read < trigger_offset &&
689 samples_read + len / 4 > trigger_offset) {
690 /* Send out samples remaining before trigger */
691 packet.type = SR_DF_LOGIC;
692 packet.payload = &logic;
693 logic.length = (trigger_offset - samples_read) * 4;
695 logic.data = buf + buf_offset;
696 sr_session_send(cb_data, &packet);
698 samples_read += logic.length / 4;
699 buf_offset += logic.length;
702 if (samples_read == trigger_offset) {
703 /* Send out trigger */
704 packet.type = SR_DF_TRIGGER;
705 packet.payload = NULL;
706 sr_session_send(cb_data, &packet);
709 /* Send out data (or data after trigger) */
710 packet.type = SR_DF_LOGIC;
711 packet.payload = &logic;
714 logic.data = buf + buf_offset;
715 sr_session_send(cb_data, &packet);
716 samples_read += len / 4;
718 analyzer_read_stop(usb->devhdl);
721 packet.type = SR_DF_END;
722 sr_session_send(cb_data, &packet);
727 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
728 static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
730 struct dev_context *devc;
731 struct sr_usb_dev_inst *usb;
732 struct sr_datafeed_packet packet;
734 packet.type = SR_DF_END;
735 sr_session_send(cb_data, &packet);
737 if (!(devc = sdi->priv)) {
738 sr_err("%s: sdi->priv was NULL", __func__);
743 analyzer_reset(usb->devhdl);
744 /* TODO: Need to cancel and free any queued up transfers. */
749 SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = {
750 .name = "zeroplus-logic-cube",
751 .longname = "ZEROPLUS Logic Cube LAP-C series",
756 .dev_list = dev_list,
758 .config_get = config_get,
759 .config_set = config_set,
760 .config_list = config_list,
761 .dev_open = dev_open,
762 .dev_close = dev_close,
763 .dev_acquisition_start = dev_acquisition_start,
764 .dev_acquisition_stop = dev_acquisition_stop,