- 'FRAME': The data is always a tuple containing two items: The (integer)
value of the UART data, and a boolean which reflects the validity of the
UART frame.
+ - 'IDLE': The data is always 0.
The <rxtx> field is 0 for RX packets, 1 for TX packets.
'''
# parity bit, the value of the data, and the length of the data (5-9 bits,
# usually 8 bits) return True if the parity is correct, False otherwise.
# 'none' is _not_ allowed as value for 'parity_type'.
-def parity_ok(parity_type, parity_bit, data, num_data_bits):
+def parity_ok(parity_type, parity_bit, data, data_bits):
+
+ if parity_type == 'ignore':
+ return True
# Handle easy cases first (parity bit is always 1 or 0).
if parity_type == 'zero':
)
options = (
{'id': 'baudrate', 'desc': 'Baud rate', 'default': 115200},
- {'id': 'num_data_bits', 'desc': 'Data bits', 'default': 8,
+ {'id': 'data_bits', 'desc': 'Data bits', 'default': 8,
'values': (5, 6, 7, 8, 9)},
- {'id': 'parity_type', 'desc': 'Parity type', 'default': 'none',
- 'values': ('none', 'odd', 'even', 'zero', 'one')},
- {'id': 'parity_check', 'desc': 'Check parity?', 'default': 'yes',
- 'values': ('yes', 'no')},
- {'id': 'num_stop_bits', 'desc': 'Stop bits', 'default': 1.0,
+ {'id': 'parity', 'desc': 'Parity', 'default': 'none',
+ 'values': ('none', 'odd', 'even', 'zero', 'one', 'ignore')},
+ {'id': 'stop_bits', 'desc': 'Stop bits', 'default': 1.0,
'values': (0.0, 0.5, 1.0, 1.5)},
{'id': 'bit_order', 'desc': 'Bit order', 'default': 'lsb-first',
'values': ('lsb-first', 'msb-first')},
'values': ('yes', 'no')},
{'id': 'invert_tx', 'desc': 'Invert TX?', 'default': 'no',
'values': ('yes', 'no')},
- {'id': 'rx_packet_delimiter', 'desc': 'RX packet delimiter (decimal)',
+ {'id': 'rx_packet_delim', 'desc': 'RX packet delimiter (decimal)',
'default': -1},
- {'id': 'tx_packet_delimiter', 'desc': 'TX packet delimiter (decimal)',
+ {'id': 'tx_packet_delim', 'desc': 'TX packet delimiter (decimal)',
'default': -1},
{'id': 'rx_packet_len', 'desc': 'RX packet length', 'default': -1},
{'id': 'tx_packet_len', 'desc': 'TX packet length', 'default': -1},
('tx-packet', 'TX packet'),
)
annotation_rows = (
- ('rx-data', 'RX', (0, 2, 4, 6, 8)),
('rx-data-bits', 'RX bits', (12,)),
+ ('rx-data', 'RX', (0, 2, 4, 6, 8)),
('rx-warnings', 'RX warnings', (10,)),
('rx-break', 'RX break', (14,)),
('rx-packets', 'RX packets', (16,)),
- ('tx-data', 'TX', (1, 3, 5, 7, 9)),
('tx-data-bits', 'TX bits', (13,)),
+ ('tx-data', 'TX', (1, 3, 5, 7, 9)),
('tx-warnings', 'TX warnings', (11,)),
('tx-break', 'TX break', (15,)),
('tx-packets', 'TX packets', (17,)),
self.out_python = self.register(srd.OUTPUT_PYTHON)
self.out_binary = self.register(srd.OUTPUT_BINARY)
self.out_ann = self.register(srd.OUTPUT_ANN)
- self.bw = (self.options['num_data_bits'] + 7) // 8
+ self.bw = (self.options['data_bits'] + 7) // 8
def metadata(self, key, value):
if key == srd.SRD_CONF_SAMPLERATE:
def handle_packet(self, rxtx):
d = 'rx' if (rxtx == RX) else 'tx'
- delim = self.options[d + '_packet_delimiter']
+ delim = self.options[d + '_packet_delim']
plen = self.options[d + '_packet_len']
if delim == -1 and plen == -1:
return
# Return here, unless we already received all data bits.
self.cur_data_bit[rxtx] += 1
- if self.cur_data_bit[rxtx] < self.options['num_data_bits']:
+ if self.cur_data_bit[rxtx] < self.options['data_bits']:
return
# Convert accumulated data bits to a data value.
# Advance to either reception of the parity bit, or reception of
# the STOP bits if parity is not applicable.
self.state[rxtx] = 'GET PARITY BIT'
- if self.options['parity_type'] == 'none':
+ if self.options['parity'] == 'none':
self.state[rxtx] = 'GET STOP BITS'
def format_value(self, v):
# Reflects the user selected kind of representation, as well as
# the number of data bits in the UART frames.
- fmt, bits = self.options['format'], self.options['num_data_bits']
+ fmt, bits = self.options['format'], self.options['data_bits']
# Assume "is printable" for values from 32 to including 126,
# below 32 is "control" and thus not printable, above 127 is
def get_parity_bit(self, rxtx, signal):
self.paritybit[rxtx] = signal
- if parity_ok(self.options['parity_type'], self.paritybit[rxtx],
- self.datavalue[rxtx], self.options['num_data_bits']):
+ if parity_ok(self.options['parity'], self.paritybit[rxtx],
+ self.datavalue[rxtx], self.options['data_bits']):
self.putp(['PARITYBIT', rxtx, self.paritybit[rxtx]])
self.putg([rxtx + 4, ['Parity bit', 'Parity', 'P']])
else:
elif state == 'GET DATA BITS':
bitnum = 1 + self.cur_data_bit[rxtx]
elif state == 'GET PARITY BIT':
- bitnum = 1 + self.options['num_data_bits']
+ bitnum = 1 + self.options['data_bits']
elif state == 'GET STOP BITS':
- bitnum = 1 + self.options['num_data_bits']
- bitnum += 0 if self.options['parity_type'] == 'none' else 1
+ bitnum = 1 + self.options['data_bits']
+ bitnum += 0 if self.options['parity'] == 'none' else 1
want_num = ceil(self.get_sample_point(rxtx, bitnum))
return {'skip': want_num - self.samplenum}
raise SamplerateError('Cannot decode without samplerate.')
has_pin = [self.has_channel(ch) for ch in (RX, TX)]
- if has_pin == [False, False]:
- raise ChannelError('Either TX or RX (or both) pins required.')
+ if not True in has_pin:
+ raise ChannelError('Need at least one of TX or RX pins.')
opt = self.options
inv = [opt['invert_rx'] == 'yes', opt['invert_tx'] == 'yes']
# Determine the number of samples for a complete frame's time span.
# A period of low signal (at least) that long is a break condition.
frame_samples = 1 # START
- frame_samples += self.options['num_data_bits']
- frame_samples += 0 if self.options['parity_type'] == 'none' else 1
- frame_samples += self.options['num_stop_bits']
+ frame_samples += self.options['data_bits']
+ frame_samples += 0 if self.options['parity'] == 'none' else 1
+ frame_samples += self.options['stop_bits']
frame_samples *= self.bit_width
self.frame_len_sample_count = ceil(frame_samples)
self.break_min_sample_count = self.frame_len_sample_count
projects / libsigrokdecode.git / blobdiff