##
## This file is part of the libsigrokdecode project.
##
-## Copyright (C) 2014 Sławek Piotrowski <slawomir.piotrowski@payu.pl>
+## Copyright (C) 2014 Sławek Piotrowski <sentinel@atteo.org>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
id = 'rfm12'
name = 'RFM12'
longname = 'RFM12 control protocol'
- desc = 'Protocol for controlling RFM12 wireless transceivers from HoperRF'
+ desc = 'HopeRF RFM12 wireless transceiver control protocol.'
license = 'gplv2+'
inputs = ['spi']
outputs = ['rfm12']
('interpretation', 'Interpretation', (5,)),
)
- def __init__(self, **kwargs):
+ def __init__(self):
self.mosi_bytes, self.miso_bytes = [], []
self.mosi_bits, self.miso_bits = [], []
self.row_pos = [0, 0, 0]
self.describe_bits(bits, NAMES)
self.describe_changed_bits(bits, old_bits, NAMES)
- FREQUENCIES = ['Reserved', '433', '868', '912']
+ FREQUENCIES = ['315', '433', '868', '915']
f = FREQUENCIES[(cmd[1] & 0x30) >> 4] + 'MHz'
self.putx(1, 2, ['Frequency: ' + f, f])
if cmd[1] & 0x30 != self.last_config & 0x30:
else:
self.advance_ann(5, 2)
- range = (cmd[1] & 0x30) >> 4
+ range_limit = (cmd[1] & 0x30) >> 4
FREQ_TABLE = [0.0, 2.5, 5.0, 7.5]
freq_delta = FREQ_TABLE[(self.last_config & 0x30) >> 4]
- if range == 0:
+ if range_limit == 0:
self.putx(0, 2, ['Range: No limit'])
- elif range == 1:
+ elif range_limit == 1:
self.putx(0, 2, ['Range: +/-%dkHz' % (15 * freq_delta)])
- elif range == 2:
+ elif range_limit == 2:
self.putx(0, 2, ['Range: +/-%dkHz' % (7 * freq_delta)])
- elif range == 3:
+ elif range_limit == 3:
self.putx(0, 2, ['Range: +/-%dkHz' % (3 * freq_delta)])
if (cmd[1] & 0x30) != (self.last_afc & 0x30):
else:
c = '%02x %02x' % tuple(cmd)
r = '%02x %02x' % tuple(ret)
- self.putx(0, 16, ['Uknown command: %s (reply: %s)!' % (c, r)])
+ self.putx(0, 16, ['Unknown command: %s (reply: %s)!' % (c, r)])
def decode(self, ss, es, data):
ptype, mosi, miso = data