Backport recent changes from mainline.

[libsigrokdecode.git] / decoders / cfp / pd.py

diff --git a/decoders/cfp/pd.py b/decoders/cfp/pd.py
new file mode 100644 (file)
index 0000000..77e61a9
--- /dev/null
+++ b/decoders/cfp/pd.py
@@ -0,0 +1,109 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2018 Elias Oenal <sigrok@eliasoenal.com>
+## All rights reserved.
+##
+## Redistribution and use in source and binary forms, with or without
+## modification, are permitted provided that the following conditions are met:
+##
+## 1. Redistributions of source code must retain the above copyright notice,
+##    this list of conditions and the following disclaimer.
+## 2. Redistributions in binary form must reproduce the above copyright notice,
+##    this list of conditions and the following disclaimer in the documentation
+##    and/or other materials provided with the distribution.
+##
+## THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+## AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+## ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+## LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+## POSSIBILITY OF SUCH DAMAGE.
+##
+
+import sigrokdecode as srd
+
+MODULE_ID = {
+    0x00: 'Unknown or unspecified',
+    0x01: 'GBIC',
+    0x02: 'Module/connector soldered to motherboard',
+    0x03: 'SFP',
+    0x04: '300 pin XSBI',
+    0x05: 'XENPAK',
+    0x06: 'XFP',
+    0x07: 'XFF',
+    0x08: 'XFP-E',
+    0x09: 'XPAK',
+    0x0a: 'X2',
+    0x0B: 'DWDM-SFP',
+    0x0C: 'QSFP',
+    0x0D: 'QSFP+',
+    0x0E: 'CFP',
+    0x0F: 'CXP (TBD)',
+    0x11: 'CFP2',
+    0x12: 'CFP4',
+}
+
+class Decoder(srd.Decoder):
+    api_version = 3
+    id = 'cfp'
+    name = 'CFP'
+    longname = '100 Gigabit C form-factor pluggable'
+    desc = '100 Gigabit C form-factor pluggable (CFP) protocol.'
+    license = 'BSD'
+    inputs = ['mdio']
+    outputs = ['cfp']
+    annotations = (
+        ('register', 'Register'),
+        ('decode', 'Decode'),
+    )
+    annotation_rows = (
+        ('registers', 'Registers', (0,)),
+        ('decodes', 'Decodes', (1,)),
+    )
+
+    def __init__(self):
+        self.reset()
+
+    def reset(self):
+        pass
+
+    def start(self):
+        self.out_ann = self.register(srd.OUTPUT_ANN)
+
+    def putx(self, data):
+        self.put(self.ss, self.es, self.out_ann, data)
+
+    def decode(self, ss, es, data):
+        self.ss, self.es = ss, es
+        for (clause45, clause45_addr, is_read, portad, devad, reg) in data:
+            if not is_read:
+                continue
+            if clause45_addr in range(0x8000, 0x807F + 1):
+                self.putx([0, ['CFP NVR 1: Basic ID register', 'NVR1']])
+                if clause45_addr == 0x8000:
+                    self.putx([1, ['Module identifier: %s' % \
+                              MODULE_ID.get(reg, 'Reserved')]])
+            elif clause45_addr in range(0x8080, 0x80FF + 1):
+                self.putx([0, ['CFP NVR 2: Extended ID register', 'NVR2']])
+            elif clause45_addr in range(0x8100, 0x817F + 1):
+                self.putx([0, ['CFP NVR 3: Network lane specific register', 'NVR3']])
+            elif clause45_addr in range(0x8180, 0x81FF + 1):
+                self.putx([0, ['CFP NVR 4', 'NVR4']])
+            elif clause45_addr in range(0x8400, 0x847F + 1):
+                self.putx([0, ['Vendor NVR 1: Vendor data register', 'V-NVR1']])
+            elif clause45_addr in range(0x8480, 0x84FF + 1):
+                self.putx([0, ['Vendor NVR 2: Vendor data register', 'V-NVR2']])
+            elif clause45_addr in range(0x8800, 0x887F + 1):
+                self.putx([0, ['User NVR 1: User data register', 'U-NVR1']])
+            elif clause45_addr in range(0x8880, 0x88FF + 1):
+                self.putx([0, ['User NVR 2: User data register', 'U-NVR2']])
+            elif clause45_addr in range(0xA000, 0xA07F + 1):
+                self.putx([0, ['CFP Module VR 1: CFP Module level control and DDM register', 'Mod-VR1']])
+            elif clause45_addr in range(0xA080, 0xA0FF + 1):
+                self.putx([0, ['MLG VR 1: MLG Management Interface register', 'MLG-VR1']])