--- /dev/null
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2019 Marco Geisler <m-sigrok@mageis.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+import sigrokdecode as srd
+from collections import namedtuple
+from .lists import *
+
+ANN_STROBE, ANN_SINGLE_READ, ANN_SINGLE_WRITE, ANN_BURST_READ, \
+ ANN_BURST_WRITE, ANN_STATUS_READ, ANN_STATUS, ANN_WARN = range(8)
+
+Pos = namedtuple('Pos', ['ss', 'es'])
+Data = namedtuple('Data', ['mosi', 'miso'])
+
+class Decoder(srd.Decoder):
+ api_version = 3
+ id = 'cc1101'
+ name = 'CC1101'
+ longname = 'Texas Instruments CC1101'
+ desc = 'Low-power sub-1GHz RF transceiver chip.'
+ license = 'gplv2+'
+ inputs = ['spi']
+ outputs = []
+ tags = ['IC', 'Wireless/RF']
+ annotations = (
+ ('strobe', 'Command strobe'),
+ ('single_read', 'Single register read'),
+ ('single_write', 'Single register write'),
+ ('burst_read', 'Burst register read'),
+ ('burst_write', 'Burst register write'),
+ ('status', 'Status register'),
+ ('warning', 'Warning'),
+ )
+ annotation_rows = (
+ ('cmd', 'Commands', (ANN_STROBE,)),
+ ('data', 'Data', (ANN_SINGLE_READ, ANN_SINGLE_WRITE, ANN_BURST_READ,
+ ANN_BURST_WRITE, ANN_STATUS_READ)),
+ ('status', 'Status register', (ANN_STATUS,)),
+ ('warnings', 'Warnings', (ANN_WARN,)),
+ )
+
+ def __init__(self):
+ self.reset()
+
+ def reset(self):
+ self.next()
+ self.requirements_met = True
+ self.cs_was_released = False
+
+ def start(self):
+ self.out_ann = self.register(srd.OUTPUT_ANN)
+
+ def warn(self, pos, msg):
+ '''Put a warning message 'msg' at 'pos'.'''
+ self.put(pos.ss, pos.es, self.out_ann, [ANN_WARN, [msg]])
+
+ def putp(self, pos, ann, msg):
+ '''Put an annotation message 'msg' at 'pos'.'''
+ self.put(pos.ss, pos.es, self.out_ann, [ann, [msg]])
+
+ def putp2(self, pos, ann, msg1, msg2):
+ '''Put an annotation message 'msg' at 'pos'.'''
+ self.put(pos.ss, pos.es, self.out_ann, [ann, [msg1, msg2]])
+
+ def next(self):
+ '''Resets the decoder after a complete command was decoded.'''
+ # 'True' for the first byte after CS# went low.
+ self.first = True
+
+ # The current command, and the minimum and maximum number
+ # of data bytes to follow.
+ self.cmd = None
+ self.min = 0
+ self.max = 0
+
+ # Used to collect the bytes after the command byte
+ # (and the start/end sample number).
+ self.mb = []
+ self.ss_mb = -1
+ self.es_mb = -1
+
+ def mosi_bytes(self):
+ '''Returns the collected MOSI bytes of a multi byte command.'''
+ return [b.mosi for b in self.mb]
+
+ def miso_bytes(self):
+ '''Returns the collected MISO bytes of a multi byte command.'''
+ return [b.miso for b in self.mb]
+
+ def decode_command(self, pos, b):
+ '''Decodes the command byte 'b' at position 'pos' and prepares
+ the decoding of the following data bytes.'''
+ c = self.parse_command(b)
+ if c is None:
+ self.warn(pos, 'unknown command')
+ return
+
+ self.cmd, self.dat, self.min, self.max = c
+
+ if self.cmd == 'Strobe':
+ self.putp(pos, ANN_STROBE, self.format_command())
+ else:
+ # Don't output anything now, the command is merged with
+ # the data bytes following it.
+ self.ss_mb = pos.ss
+
+ def format_command(self):
+ '''Returns the label for the current command.'''
+ if self.cmd in ('Read', 'Burst read', 'Write', 'Burst write', 'Status read'):
+ return self.cmd
+ if self.cmd == 'Strobe':
+ reg = strobes.get(self.dat, 'unknown strobe')
+ return '{} {}'.format(self.cmd, reg)
+ else:
+ return 'TODO Cmd {}'.format(self.cmd)
+
+ def parse_command(self, b):
+ '''Parses the command byte.
+
+ Returns a tuple consisting of:
+ - the name of the command
+ - additional data needed to dissect the following bytes
+ - minimum number of following bytes
+ - maximum number of following bytes (None for infinite)
+ '''
+
+ addr = b & 0x3F
+ if (addr < 0x30) or (addr == 0x3E) or (addr == 0x3F):
+ if (b & 0xC0) == 0x00:
+ return ('Write', addr, 1, 1)
+ if (b & 0xC0) == 0x40:
+ return ('Burst write', addr, 1, 99999)
+ if (b & 0xC0) == 0x80:
+ return ('Read', addr, 1, 1)
+ if (b & 0xC0) == 0xC0:
+ return ('Burst read', addr, 1, 99999)
+ else:
+ self.warn(pos, 'unknown address/command combination')
+ else:
+ if (b & 0x40) == 0x00:
+ return ('Strobe', addr, 0, 0)
+ if (b & 0xC0) == 0xC0:
+ return ('Status read', addr, 1, 99999)
+ else:
+ self.warn(pos, 'unknown address/command combination')
+
+ def decode_reg(self, pos, ann, regid, data):
+ '''Decodes a register.
+
+ pos -- start and end sample numbers of the register
+ ann -- the annotation number that is used to output the register.
+ regid -- may be either an integer used as a key for the 'regs'
+ dictionary, or a string directly containing a register name.'
+ data -- the register content.
+ '''
+
+ if type(regid) == int:
+ # Get the name of the register.
+ if regid not in regs:
+ self.warn(pos, 'unknown register')
+ return
+ name = '{} ({:02X})'.format(regs[regid], regid)
+ else:
+ name = regid
+
+ if regid == 'STATUS' and ann == ANN_STATUS:
+ label = 'Status'
+ self.decode_status_reg(pos, ann, data, label)
+ else:
+ if self.cmd in ('Write', 'Read', 'Status read', 'Burst read', 'Burst write'):
+ label = '{}: {}'.format(self.format_command(), name)
+ else:
+ label = 'Reg ({}) {}'.format(self.cmd, name)
+ self.decode_mb_data(pos, ann, data, label)
+
+ def decode_status_reg(self, pos, ann, data, label):
+ '''Decodes the data bytes 'data' of a status register at position
+ 'pos'. The decoded data is prefixed with 'label'.'''
+ status = data[0]
+ # bit 7 --> CHIP_RDYn
+ if status & 0b10000000 == 0b10000000:
+ longtext_chiprdy = 'CHIP_RDYn is high! '
+ else:
+ longtext_chiprdy = ''
+ # bits 6:4 --> STATE
+ state = (status & 0x70) >> 4
+ longtext_state = 'STATE is {}, '.format(status_reg_states[state])
+ # bits 3:0 --> FIFO_BYTES_AVAILABLE
+ fifo_bytes = status & 0x0F
+ if self.cmd in ('Single read', 'Status read', 'Burst read'):
+ longtext_fifo = '{} bytes available in RX FIFO'.format(fifo_bytes)
+ else:
+ longtext_fifo = '{} bytes free in TX FIFO'.format(fifo_bytes)
+
+ text = '{} = {:02X}'.format(label, status)
+ longtext = ''.join([text, '; ', longtext_chiprdy, longtext_state, longtext_fifo])
+ self.putp2(pos, ann, longtext, text)
+
+ def decode_mb_data(self, pos, ann, data, label):
+ '''Decodes the data bytes 'data' of a multibyte command at position
+ 'pos'. The decoded data is prefixed with 'label'.'''
+
+ def escape(b):
+ return '{:02X}'.format(b)
+
+ data = ' '.join([escape(b) for b in data])
+ text = '{} = {}'.format(label, data)
+ self.putp(pos, ann, text)
+
+ def finish_command(self, pos):
+ '''Decodes the remaining data bytes at position 'pos'.'''
+
+ if self.cmd == 'Write':
+ self.decode_reg(pos, ANN_SINGLE_WRITE, self.dat, self.mosi_bytes())
+ elif self.cmd == 'Burst write':
+ self.decode_reg(pos, ANN_BURST_WRITE, self.dat, self.mosi_bytes())
+ elif self.cmd == 'Read':
+ self.decode_reg(pos, ANN_SINGLE_READ, self.dat, self.miso_bytes())
+ elif self.cmd == 'Burst read':
+ self.decode_reg(pos, ANN_BURST_READ, self.dat, self.miso_bytes())
+ elif self.cmd == 'Strobe':
+ self.decode_reg(pos, ANN_STROBE, self.dat, self.mosi_bytes())
+ elif self.cmd == 'Status read':
+ self.decode_reg(pos, ANN_STATUS_READ, self.dat, self.miso_bytes())
+ else:
+ self.warn(pos, 'unhandled command')
+
+ def decode(self, ss, es, data):
+ if not self.requirements_met:
+ return
+
+ ptype, data1, data2 = data
+
+ if ptype == 'CS-CHANGE':
+ if data1 is None:
+ if data2 is None:
+ self.requirements_met = False
+ raise ChannelError('CS# pin required.')
+ elif data2 == 1:
+ self.cs_was_released = True
+
+ if data1 == 0 and data2 == 1:
+ # Rising edge, the complete command is transmitted, process
+ # the bytes that were sent after the command byte.
+ if self.cmd:
+ # Check if we got the minimum number of data bytes
+ # after the command byte.
+ if len(self.mb) < self.min:
+ self.warn((ss, ss), 'missing data bytes')
+ elif self.mb:
+ self.finish_command(Pos(self.ss_mb, self.es_mb))
+
+ self.next()
+ self.cs_was_released = True
+
+ elif ptype == 'DATA' and self.cs_was_released:
+ mosi, miso = data1, data2
+ pos = Pos(ss, es)
+
+ if miso is None or mosi is None:
+ self.requirements_met = False
+ raise ChannelError('Both MISO and MOSI pins required.')
+
+ if self.first:
+ self.first = False
+ # First MOSI byte is always the command.
+ self.decode_command(pos, mosi)
+ # First MISO byte is always the status register.
+ self.decode_reg(pos, ANN_STATUS, 'STATUS', [miso])
+ else:
+ if not self.cmd or len(self.mb) >= self.max:
+ self.warn(pos, 'excess byte')
+ else:
+ # Collect the bytes after the command byte.
+ if self.ss_mb == -1:
+ self.ss_mb = ss
+ self.es_mb = es
+ self.mb.append(Data(mosi, miso))