+++ /dev/null
-##
-## This file is part of the libsigrokdecode project.
-##
-## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 3 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, see <http://www.gnu.org/licenses/>.
-##
-
-# This module contains definitions for use by pluggable network adapters,
-# such as SFP, XFP etc.
-
-MODULE_ID = {
- 0x01: 'GBIC',
- 0x02: 'Integrated module/connector',
- 0x03: 'SFP',
- 0x04: '300-pin XBI',
- 0x05: 'XENPAK',
- 0x06: 'XFP',
- 0x07: 'XFF',
- 0x08: 'XFP-E',
- 0x09: 'XPAK',
- 0x0a: 'X2',
-}
-
-ALARM_THRESHOLDS = {
- 0: 'Temp high alarm',
- 2: 'Temp low alarm',
- 4: 'Temp high warning',
- 6: 'Temp low warning',
- 16: 'Bias high alarm',
- 18: 'Bias low alarm',
- 20: 'Bias high warning',
- 22: 'Bias low warning',
- 24: 'TX power high alarm',
- 26: 'TX power low alarm',
- 28: 'TX power high warning',
- 30: 'TX power low warning',
- 32: 'RX power high alarm',
- 34: 'RX power low alarm',
- 36: 'RX power high warning',
- 38: 'RX power low warning',
- 40: 'AUX 1 high alarm',
- 42: 'AUX 1 low alarm',
- 44: 'AUX 1 high warning',
- 46: 'AUX 1 low warning',
- 48: 'AUX 2 high alarm',
- 50: 'AUX 2 low alarm',
- 52: 'AUX 2 high warning',
- 54: 'AUX 2 low warning',
-}
-
-AD_READOUTS = {
- 0: 'Module temperature',
- 4: 'TX bias current',
- 6: 'Measured TX output power',
- 8: 'Measured RX input power',
- 10: 'AUX 1 measurement',
- 12: 'AUX 2 measurement',
-}
-
-GCS_BITS = [
- 'TX disable',
- 'Soft TX disable',
- 'MOD_NR',
- 'P_Down',
- 'Soft P_Down',
- 'Interrupt',
- 'RX_LOS',
- 'Data_Not_Ready',
- 'TX_NR',
- 'TX_Fault',
- 'TX_CDR not locked',
- 'RX_NR',
- 'RX_CDR not locked',
-]
-
-CONNECTOR = {
- 0x01: 'SC',
- 0x02: 'Fibre Channel style 1 copper',
- 0x03: 'Fibre Channel style 2 copper',
- 0x04: 'BNC/TNC',
- 0x05: 'Fibre Channel coax',
- 0x06: 'FiberJack',
- 0x07: 'LC',
- 0x08: 'MT-RJ',
- 0x09: 'MU',
- 0x0a: 'SG',
- 0x0b: 'Optical pigtail',
- 0x20: 'HSSDC II',
- 0x21: 'Copper pigtail',
-}
-
-TRANSCEIVER = [
- # 10GB Ethernet
- ['10GBASE-SR', '10GBASE-LR', '10GBASE-ER', '10GBASE-LRM', '10GBASE-SW',
- '10GBASE-LW', '10GBASE-EW'],
- # 10GB Fibre Channel
- ['1200-MX-SN-I', '1200-SM-LL-L', 'Extended Reach 1550 nm',
- 'Intermediate reach 1300 nm FP'],
- # 10GB Copper
- [],
- # 10GB low speed
- ['1000BASE-SX / 1xFC MMF', '1000BASE-LX / 1xFC SMF', '2xFC MMF',
- '2xFC SMF', 'OC48-SR', 'OC48-IR', 'OC48-LR'],
- # 10GB SONET/SDH interconnect
- ['I-64.1r', 'I-64.1', 'I-64.2r', 'I-64.2', 'I-64.3', 'I-64.5'],
- # 10GB SONET/SDH short haul
- ['S-64.1', 'S-64.2a', 'S-64.2b', 'S-64.3a', 'S-64.3b', 'S-64.5a', 'S-64.5b'],
- # 10GB SONET/SDH long haul
- ['L-64.1', 'L-64.2a', 'L-64.2b', 'L-64.2c', 'L-64.3', 'G.959.1 P1L1-2D2'],
- # 10GB SONET/SDH very long haul
- ['V-64.2a', 'V-64.2b', 'V-64.3'],
-]
-
-SERIAL_ENCODING = [
- '64B/66B',
- '8B/10B',
- 'SONET scrambled',
- 'NRZ',
- 'RZ',
-]
-
-XMIT_TECH = [
- '850 nm VCSEL',
- '1310 nm VCSEL',
- '1550 nm VCSEL',
- '1310 nm FP',
- '1310 nm DFB',
- '1550 nm DFB',
- '1310 nm EML'
- '1550 nm EML'
- 'copper',
-]
-
-CDR = [
- '9.95Gb/s',
- '10.3Gb/s',
- '10.5Gb/s',
- '10.7Gb/s',
- '11.1Gb/s',
- '(unknown)',
- 'lineside loopback mode',
- 'XFI loopback mode',
-]
-
-DEVICE_TECH = [
- ['no wavelength control', 'sctive wavelength control'],
- ['uncooled transmitter device', 'cooled transmitter'],
- ['PIN detector', 'APD detector'],
- ['transmitter not tunable', 'transmitter tunable'],
-]
-
-ENHANCED_OPTS = [
- 'VPS',
- 'soft TX_DISABLE',
- 'soft P_Down',
- 'VPS LV regulator mode',
- 'VPS bypassed regulator mode',
- 'active FEC control',
- 'wavelength tunability',
- 'CMU',
-]
-
-AUX_TYPES = [
- 'not implemented',
- 'APD bias voltage',
- '(unknown)',
- 'TEC current',
- 'laser temperature',
- 'laser wavelength',
- '5V supply voltage',
- '3.3V supply voltage',
- '1.8V supply voltage',
- '-5.2V supply voltage',
- '5V supply current',
- '(unknown)',
- '(unknown)',
- '3.3V supply current',
- '1.8V supply current',
- '-5.2V supply current',
-]
projects / libsigrokdecode.git / blobdiff