import sigrokdecode as srd
+'''
+Protocol output format:
+
+SPI packet:
+[<cmd>, <data1>, <data2>]
+
+Commands:
+ - 'DATA': <data1> contains the MISO data, <data2> contains the MOSI data.
+ The data is _usually_ 8 bits (but can also be fewer or more bits).
+ Both data items are Python numbers, not strings.
+ - 'CS CHANGE': <data1> is the old CS# pin value, <data2> is the new value.
+ Both data items are Python numbers (0/1), not strings.
+
+Examples:
+ ['CS-CHANGE', 1, 0]
+ ['DATA', 0xff, 0x3a]
+ ['DATA', 0x65, 0x00]
+ ['CS-CHANGE', 0, 1]
+'''
+
# Key: (CPOL, CPHA). Value: SPI mode.
# Clock polarity (CPOL) = 0/1: Clock is low/high when inactive.
# Clock phase (CPHA) = 0/1: Data is valid on the leading/trailing clock edge.
{'id': 'mosi', 'name': 'MOSI',
'desc': 'SPI MOSI line (Master out, slave in)'},
{'id': 'sck', 'name': 'CLK', 'desc': 'SPI clock line'},
- {'id': 'cs', 'name': 'CS#', 'desc': 'SPI CS (chip select) line'},
]
- optional_probes = [] # TODO
+ optional_probes = [
+ {'id': 'cs', 'name': 'CS#', 'desc': 'SPI chip-select line'},
+ ]
options = {
'cs_polarity': ['CS# polarity', 'active-low'],
'cpol': ['Clock polarity', 0],
'format': ['Data format', 'hex'],
}
annotations = [
- ['Data', 'SPI data'],
+ ['MISO/MOSI data', 'MISO/MOSI SPI data'],
+ ['MISO data', 'MISO SPI data'],
+ ['MOSI data', 'MOSI SPI data'],
['Warnings', 'Human-readable warnings'],
]
self.mosidata = 0
self.misodata = 0
self.bytesreceived = 0
+ self.startsample = -1
self.samplenum = -1
self.cs_was_deasserted_during_data_word = 0
self.oldcs = -1
self.oldpins = None
+ self.state = 'IDLE'
- def start(self, metadata):
- self.out_proto = self.add(srd.OUTPUT_PROTO, 'spi')
+ def start(self):
+ self.out_proto = self.add(srd.OUTPUT_PYTHON, 'spi')
self.out_ann = self.add(srd.OUTPUT_ANN, 'spi')
def report(self):
return 'SPI: %d bytes received' % self.bytesreceived
- def decode(self, ss, es, data):
- # TODO: Either MISO or MOSI could be optional. CS# is optional.
- for (self.samplenum, pins) in data:
+ def putpw(self, data):
+ self.put(self.startsample, self.samplenum, self.out_proto, data)
- # Ignore identical samples early on (for performance reasons).
- if self.oldpins == pins:
- continue
- self.oldpins, (miso, mosi, sck, cs) = pins, pins
-
- if self.oldcs != cs:
- # Send all CS# pin value changes.
- self.put(self.samplenum, self.samplenum, self.out_proto,
- ['CS-CHANGE', self.oldcs, cs])
- self.put(self.samplenum, self.samplenum, self.out_ann,
- [0, ['CS-CHANGE: %d->%d' % (self.oldcs, cs)]])
- self.oldcs = cs
+ def putw(self, data):
+ self.put(self.startsample, self.samplenum, self.out_ann, data)
- # Ignore sample if the clock pin hasn't changed.
- if sck == self.oldsck:
- continue
-
- self.oldsck = sck
-
- # Sample data on rising/falling clock edge (depends on mode).
- mode = spi_mode[self.options['cpol'], self.options['cpha']]
- if mode == 0 and sck == 0: # Sample on rising clock edge
- continue
- elif mode == 1 and sck == 1: # Sample on falling clock edge
- continue
- elif mode == 2 and sck == 1: # Sample on falling clock edge
- continue
- elif mode == 3 and sck == 0: # Sample on rising clock edge
- continue
-
- # If this is the first bit, save its sample number.
- if self.bitcount == 0:
- self.start_sample = self.samplenum
+ def handle_bit(self, miso, mosi, sck, cs):
+ # If this is the first bit, save its sample number.
+ if self.bitcount == 0:
+ self.startsample = self.samplenum
+ if self.have_cs:
active_low = (self.options['cs_polarity'] == 'active-low')
deasserted = cs if active_low else not cs
if deasserted:
self.cs_was_deasserted_during_data_word = 1
- ws = self.options['wordsize']
-
- # Receive MOSI bit into our shift register.
- if self.options['bitorder'] == 'msb-first':
- self.mosidata |= mosi << (ws - 1 - self.bitcount)
- else:
- self.mosidata |= mosi << self.bitcount
-
- # Receive MISO bit into our shift register.
- if self.options['bitorder'] == 'msb-first':
- self.misodata |= miso << (ws - 1 - self.bitcount)
- else:
- self.misodata |= miso << self.bitcount
+ ws = self.options['wordsize']
+
+ # Receive MOSI bit into our shift register.
+ if self.options['bitorder'] == 'msb-first':
+ self.mosidata |= mosi << (ws - 1 - self.bitcount)
+ else:
+ self.mosidata |= mosi << self.bitcount
+
+ # Receive MISO bit into our shift register.
+ if self.options['bitorder'] == 'msb-first':
+ self.misodata |= miso << (ws - 1 - self.bitcount)
+ else:
+ self.misodata |= miso << self.bitcount
+
+ self.bitcount += 1
+
+ # Continue to receive if not enough bits were received, yet.
+ if self.bitcount != ws:
+ return
+
+ self.putpw(['DATA', self.mosidata, self.misodata])
+ self.putw([0, ['%02X/%02X' % (self.mosidata, self.misodata)]])
+ self.putw([1, ['%02X' % self.misodata]])
+ self.putw([2, ['%02X' % self.mosidata]])
+
+ if self.cs_was_deasserted_during_data_word:
+ self.putw([3, ['CS# was deasserted during this data word!']])
+
+ # Reset decoder state.
+ self.mosidata = self.misodata = self.bitcount = 0
+
+ # Keep stats for summary.
+ self.bytesreceived += 1
+
+ def find_clk_edge(self, miso, mosi, sck, cs):
+ if self.have_cs and self.oldcs != cs:
+ # Send all CS# pin value changes.
+ self.put(self.samplenum, self.samplenum, self.out_proto,
+ ['CS-CHANGE', self.oldcs, cs])
+ self.oldcs = cs
+ # Reset decoder state when CS# changes (and the CS# pin is used).
+ self.mosidata = self.misodata = self.bitcount= 0
+
+ # Ignore sample if the clock pin hasn't changed.
+ if sck == self.oldsck:
+ return
+
+ self.oldsck = sck
+
+ # Sample data on rising/falling clock edge (depends on mode).
+ mode = spi_mode[self.options['cpol'], self.options['cpha']]
+ if mode == 0 and sck == 0: # Sample on rising clock edge
+ return
+ elif mode == 1 and sck == 1: # Sample on falling clock edge
+ return
+ elif mode == 2 and sck == 1: # Sample on falling clock edge
+ return
+ elif mode == 3 and sck == 0: # Sample on rising clock edge
+ return
+
+ # Found the correct clock edge, now get the SPI bit(s).
+ self.handle_bit(miso, mosi, sck, cs)
- self.bitcount += 1
+ def decode(self, ss, es, data):
+ # TODO: Either MISO or MOSI could be optional. CS# is optional.
+ for (self.samplenum, pins) in data:
- # Continue to receive if not enough bits were received, yet.
- if self.bitcount != ws:
+ # Ignore identical samples early on (for performance reasons).
+ if self.oldpins == pins:
continue
+ self.oldpins, (miso, mosi, sck, cs) = pins, pins
+ self.have_cs = (cs in (0, 1))
- self.put(self.start_sample, self.samplenum, self.out_proto,
- ['DATA', self.mosidata, self.misodata])
- self.put(self.start_sample, self.samplenum, self.out_ann,
- [0, ['MOSI: 0x%02x, MISO: 0x%02x' % (self.mosidata,
- self.misodata)]])
-
- if self.cs_was_deasserted_during_data_word:
- self.put(self.start_sample, self.samplenum, self.out_ann,
- [1, ['CS# was deasserted during this '
- 'SPI data byte!']])
-
- # Reset decoder state.
- self.mosidata = 0
- self.misodata = 0
- self.bitcount = 0
-
- # Keep stats for summary.
- self.bytesreceived += 1
+ # State machine.
+ if self.state == 'IDLE':
+ self.find_clk_edge(miso, mosi, sck, cs)
+ else:
+ raise Exception('Invalid state: %s' % self.state)