2 ## This file is part of the libsigrokdecode project.
4 ## Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de>
6 ## This program is free software; you can redistribute it and/or modify
7 ## it under the terms of the GNU General Public License as published by
8 ## the Free Software Foundation; either version 2 of the License, or
9 ## (at your option) any later version.
11 ## This program is distributed in the hope that it will be useful,
12 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
13 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 ## GNU General Public License for more details.
16 ## You should have received a copy of the GNU General Public License
17 ## along with this program; if not, write to the Free Software
18 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 import sigrokdecode as srd
27 class Decoder(srd.Decoder):
31 longname = 'Panasonic PAN1321'
32 desc = 'Bluetooth RF module with Serial Port Profile (SPP).'
40 ['text-verbose', 'Human-readable text (verbose)'],
41 ['text', 'Human-readable text'],
42 ['warnings', 'Human-readable warnings'],
45 def __init__(self, **kwargs):
50 # self.out_python = self.register(srd.OUTPUT_PYTHON)
51 self.out_ann = self.register(srd.OUTPUT_ANN)
54 self.put(self.ss_block, self.es_block, self.out_ann, data)
56 def handle_host_command(self, rxtx, s):
57 if s.startswith('AT+JAAC'):
58 # AT+JAAC=<auto_accept> (0 or 1)
59 p = s[s.find('=') + 1:]
60 if p not in ('0', '1'):
61 self.putx([2, ['Warning: Invalid JAAC parameter "%s"' % p]])
63 x = 'Auto' if (p == '1') else 'Don\'t auto'
64 self.putx([0, ['%s-accept new connections' % x]])
65 self.putx([1, ['%s-accept connections' % x]])
66 elif s.startswith('AT+JPRO'):
67 # AT+JPRO=<mode> (0 or 1)
68 p = s[s.find('=') + 1:]
69 if p not in ('0', '1'):
70 self.putx([2, ['Warning: Invalid JPRO parameter "%s"' % p]])
72 onoff = 'off' if (p == '0') else 'on'
73 x = 'Leaving' if (p == '0') else 'Entering'
74 self.putx([0, ['%s production mode' % x]])
75 self.putx([1, ['Production mode = %s' % onoff]])
76 elif s.startswith('AT+JRES'):
78 if s != 'AT+JRES': # JRES has no params.
79 self.putx([2, ['Warning: Invalid JRES usage.']])
81 self.putx([0, ['Triggering a software reset']])
82 self.putx([1, ['Reset']])
83 elif s.startswith('AT+JSDA'):
84 # AT+JSDA=<l>,<d> (l: length in bytes, d: data)
85 # l is (max?) 3 decimal digits and ranges from 1 to MTU size.
86 # Data can be ASCII or binary values (l bytes total).
87 l, d = s[s.find('=') + 1:].split(',')
89 self.putx([2, ['Warning: Invalid data length "%s".' % l]])
91 self.putx([2, ['Warning: Data length mismatch (%d != %d).' % \
93 # TODO: Warn if length > MTU size (which is firmware-dependent
94 # and is negotiated by both Bluetooth devices upon connection).
95 b = ''.join(['%02x ' % ord(c) for c in d])[:-1]
96 self.putx([0, ['Sending %d data bytes: %s' % (int(l), b)]])
97 self.putx([1, ['Send %d = %s' % (int(l), b)]])
98 elif s.startswith('AT+JSEC'):
99 # AT+JSEC=<secmode>,<linkkey_info>,<pintype>,<pinlen>,<pin>
100 # secmode: Security mode 1 or 3 (default).
101 # linkkey_info: Must be 1 or 2. Has no function according to docs.
102 # pintype: 1: variable pin (default), 2: fixed pin.
103 # pinlen: PIN length (2 decimal digits). Max. PIN length is 16.
104 # pin: The Bluetooth PIN ('pinlen' chars). Used if pintype=2.
105 # Note: AT+JSEC (if used) must be the first command after reset.
106 # TODO: Parse all the other parameters.
108 self.putx([0, ['Host set the Bluetooth PIN to "' + pin + '"']])
109 self.putx([1, ['PIN = ' + pin]])
110 elif s.startswith('AT+JSLN'):
111 # AT+JSLN=<namelen>,<name>
112 # namelen: Friendly name length (2 decimal digits). Max. len is 18.
113 # name: The Bluetooth "friendly name" ('namelen' ASCII characters).
114 name = s[s.find(',') + 1:]
115 self.putx([0, ['Host set the Bluetooth name to "' + name + '"']])
116 self.putx([1, ['BT name = ' + name]])
118 self.putx([0, ['Host sent unsupported command: %s' % s]])
119 self.putx([1, ['Unsupported command: %s' % s]])
121 def handle_device_reply(self, rxtx, s):
123 self.putx([0, ['Device initialized correctly']])
124 self.putx([1, ['Init']])
126 self.putx([0, ['Device acknowledged last command']])
127 self.putx([1, ['ACK']])
128 elif s.startswith('ERR'):
129 error = s[s.find('=') + 1:]
130 self.putx([0, ['Device sent error code ' + error]])
131 self.putx([1, ['ERR = ' + error]])
133 self.putx([0, ['Device sent an unknown reply: %s' % s]])
134 self.putx([1, ['Unknown reply: %s' % s]])
136 def decode(self, ss, es, data):
137 ptype, rxtx, pdata = data
139 # For now, ignore all UART packets except the actual data packets.
143 # If this is the start of a command/reply, remember the start sample.
144 if self.cmd[rxtx] == '':
147 # Append a new (ASCII) byte to the currently built/parsed command.
148 self.cmd[rxtx] += chr(pdata)
150 # Get packets/bytes until an \r\n sequence is found (end of command).
151 if self.cmd[rxtx][-2:] != '\r\n':
154 # Handle host commands and device replies.
155 # We remove trailing \r\n from the strings before handling them.
158 self.handle_device_reply(rxtx, self.cmd[rxtx][:-2])
160 self.handle_host_command(rxtx, self.cmd[rxtx][:-2])
162 raise Exception('Invalid rxtx value: %d' % rxtx)