]>
Commit | Line | Data |
---|---|---|
1 | ## | |
2 | ## This file is part of the libsigrokdecode project. | |
3 | ## | |
4 | ## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | ## | |
6 | ## This program is free software; you can redistribute it and/or modify | |
7 | ## it under the terms of the GNU General Public License as published by | |
8 | ## the Free Software Foundation; either version 2 of the License, or | |
9 | ## (at your option) any later version. | |
10 | ## | |
11 | ## This program is distributed in the hope that it will be useful, | |
12 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | ## GNU General Public License for more details. | |
15 | ## | |
16 | ## You should have received a copy of the GNU General Public License | |
17 | ## along with this program; if not, write to the Free Software | |
18 | ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | ## | |
20 | ||
21 | ''' | |
22 | The SPI (Serial Peripheral Interface) protocol decoder supports synchronous | |
23 | SPI(-like) protocols with a clock line, a MISO and MOSI line for data | |
24 | transfer in two directions, and an optional CS# pin. | |
25 | Either MISO or MOSI (but not both) can be optional. | |
26 | ||
27 | If CS# is supplied, data is only decoded when CS# is asserted (clock | |
28 | transitions where CS# is not asserted are ignored). If CS# is not supplied, | |
29 | data is decoded on every clock transition (depending on SPI mode). | |
30 | ''' | |
31 | ||
32 | from .pd import * | |
33 |