]>
Commit | Line | Data |
---|---|---|
28a35d8a HE |
1 | /* |
2 | * This file is part of the sigrok project. | |
3 | * | |
868501fa | 4 | * Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>, |
911f1834 UH |
5 | * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no> |
6 | * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no> | |
28a35d8a HE |
7 | * |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
911f1834 | 22 | /* |
6352d030 | 23 | * ASIX SIGMA/SIGMA2 logic analyzer driver |
911f1834 UH |
24 | */ |
25 | ||
3bbd9849 UH |
26 | #include <glib.h> |
27 | #include <glib/gstdio.h> | |
28a35d8a HE |
28 | #include <ftdi.h> |
29 | #include <string.h> | |
45c59c8b BV |
30 | #include "libsigrok.h" |
31 | #include "libsigrok-internal.h" | |
28a35d8a HE |
32 | #include "asix-sigma.h" |
33 | ||
34 | #define USB_VENDOR 0xa600 | |
35 | #define USB_PRODUCT 0xa000 | |
36 | #define USB_DESCRIPTION "ASIX SIGMA" | |
37 | #define USB_VENDOR_NAME "ASIX" | |
38 | #define USB_MODEL_NAME "SIGMA" | |
39 | #define USB_MODEL_VERSION "" | |
c50277a6 | 40 | #define TRIGGER_TYPE "rf10" |
464d12c7 | 41 | #define NUM_PROBES 16 |
28a35d8a | 42 | |
ed300b9f | 43 | SR_PRIV struct sr_dev_driver asix_sigma_driver_info; |
a873c594 | 44 | static struct sr_dev_driver *di = &asix_sigma_driver_info; |
69b07d14 | 45 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data); |
28a35d8a | 46 | |
a533743d | 47 | static const uint64_t supported_samplerates[] = { |
59df0c77 UH |
48 | SR_KHZ(200), |
49 | SR_KHZ(250), | |
50 | SR_KHZ(500), | |
51 | SR_MHZ(1), | |
52 | SR_MHZ(5), | |
53 | SR_MHZ(10), | |
54 | SR_MHZ(25), | |
55 | SR_MHZ(50), | |
56 | SR_MHZ(100), | |
57 | SR_MHZ(200), | |
28a35d8a HE |
58 | 0, |
59 | }; | |
60 | ||
d261dbbf UH |
61 | /* |
62 | * Probe numbers seem to go from 1-16, according to this image: | |
63 | * http://tools.asix.net/img/sigma_sigmacab_pins_720.jpg | |
64 | * (the cable has two additional GND pins, and a TI and TO pin) | |
65 | */ | |
c37d2b1b | 66 | static const char *probe_names[NUM_PROBES + 1] = { |
78693401 UH |
67 | "1", "2", "3", "4", "5", "6", "7", "8", |
68 | "9", "10", "11", "12", "13", "14", "15", "16", | |
464d12c7 KS |
69 | NULL, |
70 | }; | |
71 | ||
a533743d | 72 | static const struct sr_samplerates samplerates = { |
d3b38ad3 UH |
73 | .low = 0, |
74 | .high = 0, | |
75 | .step = 0, | |
76 | .list = supported_samplerates, | |
28a35d8a HE |
77 | }; |
78 | ||
915f7cc8 | 79 | static const int hwcaps[] = { |
1953564a BV |
80 | SR_CONF_LOGIC_ANALYZER, |
81 | SR_CONF_SAMPLERATE, | |
82 | SR_CONF_CAPTURE_RATIO, | |
28a35d8a | 83 | |
1953564a | 84 | SR_CONF_LIMIT_MSEC, |
28a35d8a HE |
85 | 0, |
86 | }; | |
87 | ||
fefa1800 UH |
88 | /* Force the FPGA to reboot. */ |
89 | static uint8_t suicide[] = { | |
90 | 0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84, | |
91 | }; | |
92 | ||
93 | /* Prepare to upload firmware (FPGA specific). */ | |
94 | static uint8_t init[] = { | |
95 | 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, | |
96 | }; | |
97 | ||
98 | /* Initialize the logic analyzer mode. */ | |
99 | static uint8_t logic_mode_start[] = { | |
100 | 0x00, 0x40, 0x0f, 0x25, 0x35, 0x40, | |
101 | 0x2a, 0x3a, 0x40, 0x03, 0x20, 0x38, | |
102 | }; | |
103 | ||
eec5275e | 104 | static const char *firmware_files[] = { |
a8116d76 HE |
105 | "asix-sigma-50.fw", /* 50 MHz, supports 8 bit fractions */ |
106 | "asix-sigma-100.fw", /* 100 MHz */ | |
107 | "asix-sigma-200.fw", /* 200 MHz */ | |
ed09fd07 | 108 | "asix-sigma-50sync.fw", /* Synchronous clock from pin */ |
a8116d76 | 109 | "asix-sigma-phasor.fw", /* Frequency counter */ |
f6564c8d HE |
110 | }; |
111 | ||
0e1357e8 | 112 | static int sigma_read(void *buf, size_t size, struct dev_context *devc) |
28a35d8a HE |
113 | { |
114 | int ret; | |
fefa1800 | 115 | |
0e1357e8 | 116 | ret = ftdi_read_data(&devc->ftdic, (unsigned char *)buf, size); |
28a35d8a | 117 | if (ret < 0) { |
47f4f073 | 118 | sr_err("ftdi_read_data failed: %s", |
0e1357e8 | 119 | ftdi_get_error_string(&devc->ftdic)); |
28a35d8a HE |
120 | } |
121 | ||
122 | return ret; | |
123 | } | |
124 | ||
0e1357e8 | 125 | static int sigma_write(void *buf, size_t size, struct dev_context *devc) |
28a35d8a HE |
126 | { |
127 | int ret; | |
fefa1800 | 128 | |
0e1357e8 | 129 | ret = ftdi_write_data(&devc->ftdic, (unsigned char *)buf, size); |
28a35d8a | 130 | if (ret < 0) { |
47f4f073 | 131 | sr_err("ftdi_write_data failed: %s", |
0e1357e8 | 132 | ftdi_get_error_string(&devc->ftdic)); |
fefa1800 | 133 | } else if ((size_t) ret != size) { |
47f4f073 | 134 | sr_err("ftdi_write_data did not complete write."); |
28a35d8a HE |
135 | } |
136 | ||
137 | return ret; | |
138 | } | |
139 | ||
99965709 | 140 | static int sigma_write_register(uint8_t reg, uint8_t *data, size_t len, |
0e1357e8 | 141 | struct dev_context *devc) |
28a35d8a HE |
142 | { |
143 | size_t i; | |
144 | uint8_t buf[len + 2]; | |
145 | int idx = 0; | |
146 | ||
147 | buf[idx++] = REG_ADDR_LOW | (reg & 0xf); | |
148 | buf[idx++] = REG_ADDR_HIGH | (reg >> 4); | |
149 | ||
fefa1800 | 150 | for (i = 0; i < len; ++i) { |
28a35d8a HE |
151 | buf[idx++] = REG_DATA_LOW | (data[i] & 0xf); |
152 | buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4); | |
153 | } | |
154 | ||
0e1357e8 | 155 | return sigma_write(buf, idx, devc); |
28a35d8a HE |
156 | } |
157 | ||
0e1357e8 | 158 | static int sigma_set_register(uint8_t reg, uint8_t value, struct dev_context *devc) |
28a35d8a | 159 | { |
0e1357e8 | 160 | return sigma_write_register(reg, &value, 1, devc); |
28a35d8a HE |
161 | } |
162 | ||
99965709 | 163 | static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len, |
0e1357e8 | 164 | struct dev_context *devc) |
28a35d8a HE |
165 | { |
166 | uint8_t buf[3]; | |
fefa1800 | 167 | |
28a35d8a HE |
168 | buf[0] = REG_ADDR_LOW | (reg & 0xf); |
169 | buf[1] = REG_ADDR_HIGH | (reg >> 4); | |
28a35d8a HE |
170 | buf[2] = REG_READ_ADDR; |
171 | ||
0e1357e8 | 172 | sigma_write(buf, sizeof(buf), devc); |
28a35d8a | 173 | |
0e1357e8 | 174 | return sigma_read(data, len, devc); |
28a35d8a HE |
175 | } |
176 | ||
0e1357e8 | 177 | static uint8_t sigma_get_register(uint8_t reg, struct dev_context *devc) |
28a35d8a HE |
178 | { |
179 | uint8_t value; | |
fefa1800 | 180 | |
0e1357e8 | 181 | if (1 != sigma_read_register(reg, &value, 1, devc)) { |
47f4f073 | 182 | sr_err("sigma_get_register: 1 byte expected"); |
28a35d8a HE |
183 | return 0; |
184 | } | |
185 | ||
186 | return value; | |
187 | } | |
188 | ||
99965709 | 189 | static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos, |
0e1357e8 | 190 | struct dev_context *devc) |
28a35d8a HE |
191 | { |
192 | uint8_t buf[] = { | |
193 | REG_ADDR_LOW | READ_TRIGGER_POS_LOW, | |
194 | ||
195 | REG_READ_ADDR | NEXT_REG, | |
196 | REG_READ_ADDR | NEXT_REG, | |
197 | REG_READ_ADDR | NEXT_REG, | |
198 | REG_READ_ADDR | NEXT_REG, | |
199 | REG_READ_ADDR | NEXT_REG, | |
200 | REG_READ_ADDR | NEXT_REG, | |
201 | }; | |
28a35d8a HE |
202 | uint8_t result[6]; |
203 | ||
0e1357e8 | 204 | sigma_write(buf, sizeof(buf), devc); |
28a35d8a | 205 | |
0e1357e8 | 206 | sigma_read(result, sizeof(result), devc); |
28a35d8a HE |
207 | |
208 | *triggerpos = result[0] | (result[1] << 8) | (result[2] << 16); | |
209 | *stoppos = result[3] | (result[4] << 8) | (result[5] << 16); | |
210 | ||
57bbf56b HE |
211 | /* Not really sure why this must be done, but according to spec. */ |
212 | if ((--*stoppos & 0x1ff) == 0x1ff) | |
213 | stoppos -= 64; | |
214 | ||
215 | if ((*--triggerpos & 0x1ff) == 0x1ff) | |
216 | triggerpos -= 64; | |
217 | ||
28a35d8a HE |
218 | return 1; |
219 | } | |
220 | ||
99965709 | 221 | static int sigma_read_dram(uint16_t startchunk, size_t numchunks, |
0e1357e8 | 222 | uint8_t *data, struct dev_context *devc) |
28a35d8a HE |
223 | { |
224 | size_t i; | |
225 | uint8_t buf[4096]; | |
226 | int idx = 0; | |
227 | ||
fefa1800 | 228 | /* Send the startchunk. Index start with 1. */ |
28a35d8a HE |
229 | buf[0] = startchunk >> 8; |
230 | buf[1] = startchunk & 0xff; | |
0e1357e8 | 231 | sigma_write_register(WRITE_MEMROW, buf, 2, devc); |
28a35d8a | 232 | |
fefa1800 | 233 | /* Read the DRAM. */ |
28a35d8a HE |
234 | buf[idx++] = REG_DRAM_BLOCK; |
235 | buf[idx++] = REG_DRAM_WAIT_ACK; | |
236 | ||
237 | for (i = 0; i < numchunks; ++i) { | |
fefa1800 UH |
238 | /* Alternate bit to copy from DRAM to cache. */ |
239 | if (i != (numchunks - 1)) | |
240 | buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4); | |
28a35d8a HE |
241 | |
242 | buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4); | |
243 | ||
fefa1800 | 244 | if (i != (numchunks - 1)) |
28a35d8a HE |
245 | buf[idx++] = REG_DRAM_WAIT_ACK; |
246 | } | |
247 | ||
0e1357e8 | 248 | sigma_write(buf, idx, devc); |
28a35d8a | 249 | |
0e1357e8 | 250 | return sigma_read(data, numchunks * CHUNK_SIZE, devc); |
28a35d8a HE |
251 | } |
252 | ||
4ae1f451 | 253 | /* Upload trigger look-up tables to Sigma. */ |
0e1357e8 | 254 | static int sigma_write_trigger_lut(struct triggerlut *lut, struct dev_context *devc) |
ee492173 HE |
255 | { |
256 | int i; | |
257 | uint8_t tmp[2]; | |
258 | uint16_t bit; | |
259 | ||
260 | /* Transpose the table and send to Sigma. */ | |
261 | for (i = 0; i < 16; ++i) { | |
262 | bit = 1 << i; | |
263 | ||
264 | tmp[0] = tmp[1] = 0; | |
265 | ||
266 | if (lut->m2d[0] & bit) | |
267 | tmp[0] |= 0x01; | |
268 | if (lut->m2d[1] & bit) | |
269 | tmp[0] |= 0x02; | |
270 | if (lut->m2d[2] & bit) | |
271 | tmp[0] |= 0x04; | |
272 | if (lut->m2d[3] & bit) | |
273 | tmp[0] |= 0x08; | |
274 | ||
275 | if (lut->m3 & bit) | |
276 | tmp[0] |= 0x10; | |
277 | if (lut->m3s & bit) | |
278 | tmp[0] |= 0x20; | |
279 | if (lut->m4 & bit) | |
280 | tmp[0] |= 0x40; | |
281 | ||
282 | if (lut->m0d[0] & bit) | |
283 | tmp[1] |= 0x01; | |
284 | if (lut->m0d[1] & bit) | |
285 | tmp[1] |= 0x02; | |
286 | if (lut->m0d[2] & bit) | |
287 | tmp[1] |= 0x04; | |
288 | if (lut->m0d[3] & bit) | |
289 | tmp[1] |= 0x08; | |
290 | ||
291 | if (lut->m1d[0] & bit) | |
292 | tmp[1] |= 0x10; | |
293 | if (lut->m1d[1] & bit) | |
294 | tmp[1] |= 0x20; | |
295 | if (lut->m1d[2] & bit) | |
296 | tmp[1] |= 0x40; | |
297 | if (lut->m1d[3] & bit) | |
298 | tmp[1] |= 0x80; | |
299 | ||
99965709 | 300 | sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp), |
0e1357e8 BV |
301 | devc); |
302 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i, devc); | |
ee492173 HE |
303 | } |
304 | ||
305 | /* Send the parameters */ | |
306 | sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params, | |
0e1357e8 | 307 | sizeof(lut->params), devc); |
ee492173 | 308 | |
e46b8fb1 | 309 | return SR_OK; |
ee492173 HE |
310 | } |
311 | ||
fefa1800 | 312 | /* Generate the bitbang stream for programming the FPGA. */ |
28a35d8a | 313 | static int bin2bitbang(const char *filename, |
fefa1800 | 314 | unsigned char **buf, size_t *buf_size) |
28a35d8a | 315 | { |
fefa1800 | 316 | FILE *f; |
e3fff420 | 317 | unsigned long file_size; |
28a35d8a HE |
318 | unsigned long offset = 0; |
319 | unsigned char *p; | |
e3fff420 HE |
320 | uint8_t *firmware; |
321 | unsigned long fwsize = 0; | |
28a35d8a HE |
322 | const int buffer_size = 65536; |
323 | size_t i; | |
e3fff420 | 324 | int c, bit, v; |
fefa1800 | 325 | uint32_t imm = 0x3f6df2ab; |
28a35d8a | 326 | |
868d8cef | 327 | f = g_fopen(filename, "rb"); |
28a35d8a | 328 | if (!f) { |
47f4f073 | 329 | sr_err("g_fopen(\"%s\", \"rb\")", filename); |
b53738ba | 330 | return SR_ERR; |
28a35d8a HE |
331 | } |
332 | ||
333 | if (-1 == fseek(f, 0, SEEK_END)) { | |
47f4f073 | 334 | sr_err("fseek on %s failed", filename); |
28a35d8a | 335 | fclose(f); |
b53738ba | 336 | return SR_ERR; |
28a35d8a HE |
337 | } |
338 | ||
339 | file_size = ftell(f); | |
340 | ||
341 | fseek(f, 0, SEEK_SET); | |
342 | ||
b53738ba | 343 | if (!(firmware = g_try_malloc(buffer_size))) { |
47f4f073 | 344 | sr_err("%s: firmware malloc failed", __func__); |
12ad53f5 | 345 | fclose(f); |
b53738ba | 346 | return SR_ERR_MALLOC; |
28a35d8a HE |
347 | } |
348 | ||
28a35d8a HE |
349 | while ((c = getc(f)) != EOF) { |
350 | imm = (imm + 0xa853753) % 177 + (imm * 0x8034052); | |
e3fff420 | 351 | firmware[fwsize++] = c ^ imm; |
28a35d8a HE |
352 | } |
353 | fclose(f); | |
354 | ||
e3fff420 | 355 | if(fwsize != file_size) { |
47f4f073 | 356 | sr_err("%s: Error reading firmware", filename); |
e3fff420 HE |
357 | fclose(f); |
358 | g_free(firmware); | |
359 | return SR_ERR; | |
28a35d8a HE |
360 | } |
361 | ||
28a35d8a HE |
362 | *buf_size = fwsize * 2 * 8; |
363 | ||
b53738ba | 364 | *buf = p = (unsigned char *)g_try_malloc(*buf_size); |
28a35d8a | 365 | if (!p) { |
47f4f073 | 366 | sr_err("%s: buf/p malloc failed", __func__); |
12ad53f5 | 367 | g_free(firmware); |
b53738ba | 368 | return SR_ERR_MALLOC; |
28a35d8a HE |
369 | } |
370 | ||
371 | for (i = 0; i < fwsize; ++i) { | |
28a35d8a | 372 | for (bit = 7; bit >= 0; --bit) { |
fefa1800 | 373 | v = firmware[i] & 1 << bit ? 0x40 : 0x00; |
28a35d8a HE |
374 | p[offset++] = v | 0x01; |
375 | p[offset++] = v; | |
376 | } | |
377 | } | |
378 | ||
379 | g_free(firmware); | |
380 | ||
381 | if (offset != *buf_size) { | |
382 | g_free(*buf); | |
47f4f073 | 383 | sr_err("Error reading firmware %s " |
0aeb0ccd | 384 | "offset=%ld, file_size=%ld, buf_size=%zd.", |
133a37bf | 385 | filename, offset, file_size, *buf_size); |
28a35d8a | 386 | |
b53738ba | 387 | return SR_ERR; |
28a35d8a HE |
388 | } |
389 | ||
b53738ba | 390 | return SR_OK; |
28a35d8a HE |
391 | } |
392 | ||
811deee4 | 393 | static int clear_instances(void) |
0448d110 BV |
394 | { |
395 | GSList *l; | |
396 | struct sr_dev_inst *sdi; | |
0e1357e8 BV |
397 | struct drv_context *drvc; |
398 | struct dev_context *devc; | |
399 | ||
a873c594 | 400 | drvc = di->priv; |
0448d110 BV |
401 | |
402 | /* Properly close all devices. */ | |
0e1357e8 | 403 | for (l = drvc->instances; l; l = l->next) { |
0448d110 BV |
404 | if (!(sdi = l->data)) { |
405 | /* Log error, but continue cleaning up the rest. */ | |
47f4f073 | 406 | sr_err("%s: sdi was NULL, continuing", __func__); |
0448d110 BV |
407 | continue; |
408 | } | |
409 | if (sdi->priv) { | |
0e1357e8 BV |
410 | devc = sdi->priv; |
411 | ftdi_free(&devc->ftdic); | |
0448d110 BV |
412 | } |
413 | sr_dev_inst_free(sdi); | |
414 | } | |
0e1357e8 BV |
415 | g_slist_free(drvc->instances); |
416 | drvc->instances = NULL; | |
0448d110 | 417 | |
811deee4 | 418 | return SR_OK; |
0448d110 BV |
419 | } |
420 | ||
34f06b90 | 421 | static int hw_init(struct sr_context *sr_ctx) |
61136ea6 | 422 | { |
063e7aef | 423 | return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN); |
61136ea6 BV |
424 | } |
425 | ||
0448d110 | 426 | static GSList *hw_scan(GSList *options) |
28a35d8a | 427 | { |
d68e2d1a | 428 | struct sr_dev_inst *sdi; |
87ca93c5 | 429 | struct sr_probe *probe; |
0e1357e8 BV |
430 | struct drv_context *drvc; |
431 | struct dev_context *devc; | |
0448d110 | 432 | GSList *devices; |
e3fff420 HE |
433 | struct ftdi_device_list *devlist; |
434 | char serial_txt[10]; | |
435 | uint32_t serial; | |
87ca93c5 | 436 | int ret, i; |
28a35d8a | 437 | |
0448d110 | 438 | (void)options; |
64d33dc2 | 439 | |
a873c594 | 440 | drvc = di->priv; |
4b97c74e | 441 | |
0448d110 | 442 | devices = NULL; |
4b97c74e | 443 | |
0448d110 BV |
444 | clear_instances(); |
445 | ||
0e1357e8 | 446 | if (!(devc = g_try_malloc(sizeof(struct dev_context)))) { |
47f4f073 | 447 | sr_err("%s: devc malloc failed", __func__); |
0448d110 | 448 | return NULL; |
b53738ba | 449 | } |
99965709 | 450 | |
0e1357e8 | 451 | ftdi_init(&devc->ftdic); |
28a35d8a | 452 | |
fefa1800 | 453 | /* Look for SIGMAs. */ |
e3fff420 | 454 | |
0e1357e8 | 455 | if ((ret = ftdi_usb_find_all(&devc->ftdic, &devlist, |
eec944c5 BV |
456 | USB_VENDOR, USB_PRODUCT)) <= 0) { |
457 | if (ret < 0) | |
458 | sr_err("ftdi_usb_find_all(): %d", ret); | |
99965709 | 459 | goto free; |
eec944c5 | 460 | } |
99965709 | 461 | |
e3fff420 | 462 | /* Make sure it's a version 1 or 2 SIGMA. */ |
0e1357e8 | 463 | ftdi_usb_get_strings(&devc->ftdic, devlist->dev, NULL, 0, NULL, 0, |
6352d030 | 464 | serial_txt, sizeof(serial_txt)); |
e3fff420 HE |
465 | sscanf(serial_txt, "%x", &serial); |
466 | ||
6352d030 | 467 | if (serial < 0xa6010000 || serial > 0xa602ffff) { |
47f4f073 UH |
468 | sr_err("Only SIGMA and SIGMA2 are supported " |
469 | "in this version of libsigrok."); | |
e3fff420 HE |
470 | goto free; |
471 | } | |
472 | ||
473 | sr_info("Found ASIX SIGMA - Serial: %s", serial_txt); | |
474 | ||
0e1357e8 BV |
475 | devc->cur_samplerate = 0; |
476 | devc->period_ps = 0; | |
477 | devc->limit_msec = 0; | |
478 | devc->cur_firmware = -1; | |
479 | devc->num_probes = 0; | |
480 | devc->samples_per_event = 0; | |
481 | devc->capture_ratio = 50; | |
482 | devc->use_triggers = 0; | |
28a35d8a | 483 | |
fefa1800 | 484 | /* Register SIGMA device. */ |
d68e2d1a UH |
485 | if (!(sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING, USB_VENDOR_NAME, |
486 | USB_MODEL_NAME, USB_MODEL_VERSION))) { | |
47f4f073 | 487 | sr_err("%s: sdi was NULL", __func__); |
99965709 | 488 | goto free; |
d68e2d1a | 489 | } |
a873c594 | 490 | sdi->driver = di; |
87ca93c5 BV |
491 | |
492 | for (i = 0; probe_names[i]; i++) { | |
de6e0eca | 493 | if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE, |
87ca93c5 BV |
494 | probe_names[i]))) |
495 | return NULL; | |
496 | sdi->probes = g_slist_append(sdi->probes, probe); | |
497 | } | |
498 | ||
0448d110 | 499 | devices = g_slist_append(devices, sdi); |
0e1357e8 BV |
500 | drvc->instances = g_slist_append(drvc->instances, sdi); |
501 | sdi->priv = devc; | |
28a35d8a | 502 | |
fefa1800 | 503 | /* We will open the device again when we need it. */ |
e3fff420 | 504 | ftdi_list_free(&devlist); |
28a35d8a | 505 | |
0448d110 | 506 | return devices; |
ea9cfed7 | 507 | |
99965709 | 508 | free: |
0e1357e8 BV |
509 | ftdi_deinit(&devc->ftdic); |
510 | g_free(devc); | |
0448d110 | 511 | return NULL; |
28a35d8a HE |
512 | } |
513 | ||
811deee4 BV |
514 | static GSList *hw_dev_list(void) |
515 | { | |
0e94d524 | 516 | return ((struct drv_context *)(di->priv))->instances; |
811deee4 BV |
517 | } |
518 | ||
0e1357e8 | 519 | static int upload_firmware(int firmware_idx, struct dev_context *devc) |
28a35d8a HE |
520 | { |
521 | int ret; | |
522 | unsigned char *buf; | |
523 | unsigned char pins; | |
524 | size_t buf_size; | |
28a35d8a | 525 | unsigned char result[32]; |
e8397563 | 526 | char firmware_path[128]; |
28a35d8a | 527 | |
fefa1800 | 528 | /* Make sure it's an ASIX SIGMA. */ |
0e1357e8 | 529 | if ((ret = ftdi_usb_open_desc(&devc->ftdic, |
28a35d8a | 530 | USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) { |
47f4f073 | 531 | sr_err("ftdi_usb_open failed: %s", |
0e1357e8 | 532 | ftdi_get_error_string(&devc->ftdic)); |
28a35d8a HE |
533 | return 0; |
534 | } | |
535 | ||
0e1357e8 | 536 | if ((ret = ftdi_set_bitmode(&devc->ftdic, 0xdf, BITMODE_BITBANG)) < 0) { |
47f4f073 | 537 | sr_err("ftdi_set_bitmode failed: %s", |
0e1357e8 | 538 | ftdi_get_error_string(&devc->ftdic)); |
28a35d8a HE |
539 | return 0; |
540 | } | |
541 | ||
fefa1800 | 542 | /* Four times the speed of sigmalogan - Works well. */ |
0e1357e8 | 543 | if ((ret = ftdi_set_baudrate(&devc->ftdic, 750000)) < 0) { |
47f4f073 | 544 | sr_err("ftdi_set_baudrate failed: %s", |
0e1357e8 | 545 | ftdi_get_error_string(&devc->ftdic)); |
28a35d8a HE |
546 | return 0; |
547 | } | |
548 | ||
fefa1800 | 549 | /* Force the FPGA to reboot. */ |
0e1357e8 BV |
550 | sigma_write(suicide, sizeof(suicide), devc); |
551 | sigma_write(suicide, sizeof(suicide), devc); | |
552 | sigma_write(suicide, sizeof(suicide), devc); | |
553 | sigma_write(suicide, sizeof(suicide), devc); | |
28a35d8a | 554 | |
fefa1800 | 555 | /* Prepare to upload firmware (FPGA specific). */ |
0e1357e8 | 556 | sigma_write(init, sizeof(init), devc); |
28a35d8a | 557 | |
0e1357e8 | 558 | ftdi_usb_purge_buffers(&devc->ftdic); |
28a35d8a | 559 | |
fefa1800 | 560 | /* Wait until the FPGA asserts INIT_B. */ |
28a35d8a | 561 | while (1) { |
0e1357e8 | 562 | ret = sigma_read(result, 1, devc); |
28a35d8a HE |
563 | if (result[0] & 0x20) |
564 | break; | |
565 | } | |
566 | ||
9ddb2a12 | 567 | /* Prepare firmware. */ |
e8397563 | 568 | snprintf(firmware_path, sizeof(firmware_path), "%s/%s", FIRMWARE_DIR, |
f6564c8d HE |
569 | firmware_files[firmware_idx]); |
570 | ||
b53738ba | 571 | if ((ret = bin2bitbang(firmware_path, &buf, &buf_size)) != SR_OK) { |
47f4f073 | 572 | sr_err("An error occured while reading the firmware: %s", |
133a37bf | 573 | firmware_path); |
b53738ba | 574 | return ret; |
28a35d8a HE |
575 | } |
576 | ||
fefa1800 | 577 | /* Upload firmare. */ |
47f4f073 | 578 | sr_info("Uploading firmware file '%s'.", firmware_files[firmware_idx]); |
0e1357e8 | 579 | sigma_write(buf, buf_size, devc); |
28a35d8a HE |
580 | |
581 | g_free(buf); | |
582 | ||
0e1357e8 | 583 | if ((ret = ftdi_set_bitmode(&devc->ftdic, 0x00, BITMODE_RESET)) < 0) { |
47f4f073 | 584 | sr_err("ftdi_set_bitmode failed: %s", |
0e1357e8 | 585 | ftdi_get_error_string(&devc->ftdic)); |
e46b8fb1 | 586 | return SR_ERR; |
28a35d8a HE |
587 | } |
588 | ||
0e1357e8 | 589 | ftdi_usb_purge_buffers(&devc->ftdic); |
28a35d8a | 590 | |
fefa1800 | 591 | /* Discard garbage. */ |
0e1357e8 | 592 | while (1 == sigma_read(&pins, 1, devc)) |
28a35d8a HE |
593 | ; |
594 | ||
fefa1800 | 595 | /* Initialize the logic analyzer mode. */ |
0e1357e8 | 596 | sigma_write(logic_mode_start, sizeof(logic_mode_start), devc); |
28a35d8a | 597 | |
fefa1800 | 598 | /* Expect a 3 byte reply. */ |
0e1357e8 | 599 | ret = sigma_read(result, 3, devc); |
28a35d8a HE |
600 | if (ret != 3 || |
601 | result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) { | |
47f4f073 | 602 | sr_err("Configuration failed. Invalid reply received."); |
e46b8fb1 | 603 | return SR_ERR; |
28a35d8a HE |
604 | } |
605 | ||
0e1357e8 | 606 | devc->cur_firmware = firmware_idx; |
f6564c8d | 607 | |
47f4f073 | 608 | sr_info("Firmware uploaded."); |
e3fff420 | 609 | |
e46b8fb1 | 610 | return SR_OK; |
f6564c8d HE |
611 | } |
612 | ||
25a0f108 | 613 | static int hw_dev_open(struct sr_dev_inst *sdi) |
f6564c8d | 614 | { |
0e1357e8 | 615 | struct dev_context *devc; |
f6564c8d HE |
616 | int ret; |
617 | ||
0e1357e8 | 618 | devc = sdi->priv; |
99965709 | 619 | |
9ddb2a12 | 620 | /* Make sure it's an ASIX SIGMA. */ |
0e1357e8 | 621 | if ((ret = ftdi_usb_open_desc(&devc->ftdic, |
f6564c8d HE |
622 | USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) { |
623 | ||
47f4f073 | 624 | sr_err("ftdi_usb_open failed: %s", |
0e1357e8 | 625 | ftdi_get_error_string(&devc->ftdic)); |
f6564c8d HE |
626 | |
627 | return 0; | |
628 | } | |
28a35d8a | 629 | |
5a2326a7 | 630 | sdi->status = SR_ST_ACTIVE; |
28a35d8a | 631 | |
e46b8fb1 | 632 | return SR_OK; |
f6564c8d HE |
633 | } |
634 | ||
6f4b1868 | 635 | static int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate) |
f6564c8d | 636 | { |
e8397563 | 637 | int i, ret; |
0e1357e8 | 638 | struct dev_context *devc = sdi->priv; |
f6564c8d | 639 | |
f4abaa9f UH |
640 | ret = SR_OK; |
641 | ||
f6564c8d HE |
642 | for (i = 0; supported_samplerates[i]; i++) { |
643 | if (supported_samplerates[i] == samplerate) | |
644 | break; | |
645 | } | |
646 | if (supported_samplerates[i] == 0) | |
e46b8fb1 | 647 | return SR_ERR_SAMPLERATE; |
f6564c8d | 648 | |
59df0c77 | 649 | if (samplerate <= SR_MHZ(50)) { |
0e1357e8 BV |
650 | ret = upload_firmware(0, devc); |
651 | devc->num_probes = 16; | |
e8397563 | 652 | } |
59df0c77 | 653 | if (samplerate == SR_MHZ(100)) { |
0e1357e8 BV |
654 | ret = upload_firmware(1, devc); |
655 | devc->num_probes = 8; | |
f78898e9 | 656 | } |
59df0c77 | 657 | else if (samplerate == SR_MHZ(200)) { |
0e1357e8 BV |
658 | ret = upload_firmware(2, devc); |
659 | devc->num_probes = 4; | |
f78898e9 | 660 | } |
f6564c8d | 661 | |
0e1357e8 | 662 | devc->cur_samplerate = samplerate; |
5edc02c7 | 663 | devc->period_ps = 1000000000000ULL / samplerate; |
0e1357e8 BV |
664 | devc->samples_per_event = 16 / devc->num_probes; |
665 | devc->state.state = SIGMA_IDLE; | |
f6564c8d | 666 | |
e8397563 | 667 | return ret; |
28a35d8a HE |
668 | } |
669 | ||
c53d793f HE |
670 | /* |
671 | * In 100 and 200 MHz mode, only a single pin rising/falling can be | |
672 | * set as trigger. In other modes, two rising/falling triggers can be set, | |
673 | * in addition to value/mask trigger for any number of probes. | |
674 | * | |
675 | * The Sigma supports complex triggers using boolean expressions, but this | |
676 | * has not been implemented yet. | |
677 | */ | |
014359e3 | 678 | static int configure_probes(const struct sr_dev_inst *sdi) |
57bbf56b | 679 | { |
0e1357e8 | 680 | struct dev_context *devc = sdi->priv; |
1b79df2f JH |
681 | const struct sr_probe *probe; |
682 | const GSList *l; | |
57bbf56b | 683 | int trigger_set = 0; |
a42aec7f | 684 | int probebit; |
57bbf56b | 685 | |
0e1357e8 | 686 | memset(&devc->trigger, 0, sizeof(struct sigma_trigger)); |
eec5275e | 687 | |
014359e3 | 688 | for (l = sdi->probes; l; l = l->next) { |
1afe8989 | 689 | probe = (struct sr_probe *)l->data; |
b35c8293 | 690 | probebit = 1 << (probe->index); |
57bbf56b HE |
691 | |
692 | if (!probe->enabled || !probe->trigger) | |
693 | continue; | |
694 | ||
0e1357e8 | 695 | if (devc->cur_samplerate >= SR_MHZ(100)) { |
c53d793f | 696 | /* Fast trigger support. */ |
ee492173 | 697 | if (trigger_set) { |
47f4f073 UH |
698 | sr_err("Only a single pin trigger in 100 and " |
699 | "200MHz mode is supported."); | |
e46b8fb1 | 700 | return SR_ERR; |
ee492173 HE |
701 | } |
702 | if (probe->trigger[0] == 'f') | |
0e1357e8 | 703 | devc->trigger.fallingmask |= probebit; |
ee492173 | 704 | else if (probe->trigger[0] == 'r') |
0e1357e8 | 705 | devc->trigger.risingmask |= probebit; |
ee492173 | 706 | else { |
47f4f073 UH |
707 | sr_err("Only rising/falling trigger in 100 " |
708 | "and 200MHz mode is supported."); | |
e46b8fb1 | 709 | return SR_ERR; |
ee492173 | 710 | } |
57bbf56b | 711 | |
c53d793f | 712 | ++trigger_set; |
ee492173 | 713 | } else { |
c53d793f HE |
714 | /* Simple trigger support (event). */ |
715 | if (probe->trigger[0] == '1') { | |
0e1357e8 BV |
716 | devc->trigger.simplevalue |= probebit; |
717 | devc->trigger.simplemask |= probebit; | |
c53d793f HE |
718 | } |
719 | else if (probe->trigger[0] == '0') { | |
0e1357e8 BV |
720 | devc->trigger.simplevalue &= ~probebit; |
721 | devc->trigger.simplemask |= probebit; | |
c53d793f HE |
722 | } |
723 | else if (probe->trigger[0] == 'f') { | |
0e1357e8 | 724 | devc->trigger.fallingmask |= probebit; |
c53d793f HE |
725 | ++trigger_set; |
726 | } | |
727 | else if (probe->trigger[0] == 'r') { | |
0e1357e8 | 728 | devc->trigger.risingmask |= probebit; |
c53d793f HE |
729 | ++trigger_set; |
730 | } | |
ee492173 | 731 | |
ea9cfed7 UH |
732 | /* |
733 | * Actually, Sigma supports 2 rising/falling triggers, | |
734 | * but they are ORed and the current trigger syntax | |
735 | * does not permit ORed triggers. | |
736 | */ | |
98b8cbc1 | 737 | if (trigger_set > 1) { |
47f4f073 UH |
738 | sr_err("Only 1 rising/falling trigger " |
739 | "is supported."); | |
e46b8fb1 | 740 | return SR_ERR; |
ee492173 | 741 | } |
ee492173 | 742 | } |
5b5ea7c6 HE |
743 | |
744 | if (trigger_set) | |
0e1357e8 | 745 | devc->use_triggers = 1; |
57bbf56b HE |
746 | } |
747 | ||
e46b8fb1 | 748 | return SR_OK; |
57bbf56b HE |
749 | } |
750 | ||
25a0f108 | 751 | static int hw_dev_close(struct sr_dev_inst *sdi) |
28a35d8a | 752 | { |
0e1357e8 | 753 | struct dev_context *devc; |
28a35d8a | 754 | |
961009b0 | 755 | devc = sdi->priv; |
697785d1 UH |
756 | |
757 | /* TODO */ | |
758 | if (sdi->status == SR_ST_ACTIVE) | |
0e1357e8 | 759 | ftdi_usb_close(&devc->ftdic); |
697785d1 UH |
760 | |
761 | sdi->status = SR_ST_INACTIVE; | |
762 | ||
763 | return SR_OK; | |
28a35d8a HE |
764 | } |
765 | ||
57ab7d9f | 766 | static int hw_cleanup(void) |
28a35d8a | 767 | { |
a873c594 | 768 | if (!di->priv) |
b32503cc BV |
769 | return SR_OK; |
770 | ||
0448d110 | 771 | clear_instances(); |
57ab7d9f | 772 | |
0448d110 | 773 | return SR_OK; |
28a35d8a HE |
774 | } |
775 | ||
035a1078 | 776 | static int config_get(int id, const void **data, const struct sr_dev_inst *sdi) |
28a35d8a | 777 | { |
0e1357e8 | 778 | struct dev_context *devc; |
99965709 | 779 | |
035a1078 | 780 | switch (id) { |
123e1313 | 781 | case SR_CONF_SAMPLERATE: |
41479605 | 782 | if (sdi) { |
0e1357e8 BV |
783 | devc = sdi->priv; |
784 | *data = &devc->cur_samplerate; | |
41479605 BV |
785 | } else |
786 | return SR_ERR; | |
28a35d8a | 787 | break; |
d7bbecfd BV |
788 | default: |
789 | return SR_ERR_ARG; | |
28a35d8a HE |
790 | } |
791 | ||
41479605 | 792 | return SR_OK; |
28a35d8a HE |
793 | } |
794 | ||
035a1078 | 795 | static int config_set(int id, const void *value, const struct sr_dev_inst *sdi) |
28a35d8a | 796 | { |
0e1357e8 | 797 | struct dev_context *devc; |
28a35d8a | 798 | int ret; |
f6564c8d | 799 | |
0e1357e8 | 800 | devc = sdi->priv; |
99965709 | 801 | |
035a1078 | 802 | if (id == SR_CONF_SAMPLERATE) { |
1b79df2f | 803 | ret = set_samplerate(sdi, *(const uint64_t *)value); |
035a1078 | 804 | } else if (id == SR_CONF_LIMIT_MSEC) { |
0e1357e8 BV |
805 | devc->limit_msec = *(const uint64_t *)value; |
806 | if (devc->limit_msec > 0) | |
e46b8fb1 | 807 | ret = SR_OK; |
94ba4bd6 | 808 | else |
e46b8fb1 | 809 | ret = SR_ERR; |
035a1078 | 810 | } else if (id == SR_CONF_CAPTURE_RATIO) { |
0e1357e8 BV |
811 | devc->capture_ratio = *(const uint64_t *)value; |
812 | if (devc->capture_ratio < 0 || devc->capture_ratio > 100) | |
e46b8fb1 | 813 | ret = SR_ERR; |
94ba4bd6 | 814 | else |
e46b8fb1 | 815 | ret = SR_OK; |
28a35d8a | 816 | } else { |
e46b8fb1 | 817 | ret = SR_ERR; |
28a35d8a HE |
818 | } |
819 | ||
820 | return ret; | |
821 | } | |
822 | ||
a1c743fc BV |
823 | static int config_list(int key, const void **data, const struct sr_dev_inst *sdi) |
824 | { | |
825 | ||
826 | (void)sdi; | |
827 | ||
828 | switch (key) { | |
9a6517d1 BV |
829 | case SR_CONF_DEVICE_OPTIONS: |
830 | *data = hwcaps; | |
831 | break; | |
a1c743fc BV |
832 | case SR_CONF_SAMPLERATE: |
833 | *data = &samplerates; | |
834 | break; | |
c50277a6 BV |
835 | case SR_CONF_TRIGGER_TYPE: |
836 | *data = (char *)TRIGGER_TYPE; | |
837 | break; | |
a1c743fc BV |
838 | default: |
839 | return SR_ERR_ARG; | |
840 | } | |
841 | ||
842 | return SR_OK; | |
843 | } | |
844 | ||
36b1c8e6 HE |
845 | /* Software trigger to determine exact trigger position. */ |
846 | static int get_trigger_offset(uint16_t *samples, uint16_t last_sample, | |
847 | struct sigma_trigger *t) | |
848 | { | |
849 | int i; | |
850 | ||
851 | for (i = 0; i < 8; ++i) { | |
852 | if (i > 0) | |
853 | last_sample = samples[i-1]; | |
854 | ||
855 | /* Simple triggers. */ | |
856 | if ((samples[i] & t->simplemask) != t->simplevalue) | |
857 | continue; | |
858 | ||
859 | /* Rising edge. */ | |
860 | if ((last_sample & t->risingmask) != 0 || (samples[i] & | |
861 | t->risingmask) != t->risingmask) | |
862 | continue; | |
863 | ||
864 | /* Falling edge. */ | |
bdfc7a89 HE |
865 | if ((last_sample & t->fallingmask) != t->fallingmask || |
866 | (samples[i] & t->fallingmask) != 0) | |
36b1c8e6 HE |
867 | continue; |
868 | ||
869 | break; | |
870 | } | |
871 | ||
872 | /* If we did not match, return original trigger pos. */ | |
873 | return i & 0x7; | |
874 | } | |
875 | ||
28a35d8a | 876 | /* |
fefa1800 UH |
877 | * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster. |
878 | * Each event is 20ns apart, and can contain multiple samples. | |
f78898e9 HE |
879 | * |
880 | * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart. | |
881 | * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart. | |
882 | * For 50 MHz and below, events contain one sample for each channel, | |
883 | * spread 20 ns apart. | |
28a35d8a HE |
884 | */ |
885 | static int decode_chunk_ts(uint8_t *buf, uint16_t *lastts, | |
88c51afe | 886 | uint16_t *lastsample, int triggerpos, |
3cd3a20b | 887 | uint16_t limit_chunk, void *cb_data) |
28a35d8a | 888 | { |
3cd3a20b | 889 | struct sr_dev_inst *sdi = cb_data; |
0e1357e8 | 890 | struct dev_context *devc = sdi->priv; |
fefa1800 | 891 | uint16_t tsdiff, ts; |
0e1357e8 | 892 | uint16_t samples[65536 * devc->samples_per_event]; |
b9c735a2 | 893 | struct sr_datafeed_packet packet; |
9c939c51 | 894 | struct sr_datafeed_logic logic; |
f78898e9 | 895 | int i, j, k, l, numpad, tosend; |
fefa1800 | 896 | size_t n = 0, sent = 0; |
0e1357e8 | 897 | int clustersize = EVENTS_PER_CLUSTER * devc->samples_per_event; |
fefa1800 | 898 | uint16_t *event; |
f78898e9 | 899 | uint16_t cur_sample; |
57bbf56b | 900 | int triggerts = -1; |
ee492173 | 901 | |
4ae1f451 | 902 | /* Check if trigger is in this chunk. */ |
ee492173 | 903 | if (triggerpos != -1) { |
0e1357e8 | 904 | if (devc->cur_samplerate <= SR_MHZ(50)) |
36b1c8e6 | 905 | triggerpos -= EVENTS_PER_CLUSTER - 1; |
ee492173 HE |
906 | |
907 | if (triggerpos < 0) | |
908 | triggerpos = 0; | |
57bbf56b | 909 | |
ee492173 HE |
910 | /* Find in which cluster the trigger occured. */ |
911 | triggerts = triggerpos / 7; | |
912 | } | |
28a35d8a | 913 | |
eec5275e | 914 | /* For each ts. */ |
28a35d8a | 915 | for (i = 0; i < 64; ++i) { |
fefa1800 | 916 | ts = *(uint16_t *) &buf[i * 16]; |
28a35d8a HE |
917 | tsdiff = ts - *lastts; |
918 | *lastts = ts; | |
919 | ||
88c51afe HE |
920 | /* Decode partial chunk. */ |
921 | if (limit_chunk && ts > limit_chunk) | |
e46b8fb1 | 922 | return SR_OK; |
88c51afe | 923 | |
fefa1800 | 924 | /* Pad last sample up to current point. */ |
0e1357e8 | 925 | numpad = tsdiff * devc->samples_per_event - clustersize; |
28a35d8a | 926 | if (numpad > 0) { |
f78898e9 HE |
927 | for (j = 0; j < numpad; ++j) |
928 | samples[j] = *lastsample; | |
929 | ||
930 | n = numpad; | |
28a35d8a HE |
931 | } |
932 | ||
57bbf56b HE |
933 | /* Send samples between previous and this timestamp to sigrok. */ |
934 | sent = 0; | |
935 | while (sent < n) { | |
936 | tosend = MIN(2048, n - sent); | |
937 | ||
5a2326a7 | 938 | packet.type = SR_DF_LOGIC; |
9c939c51 BV |
939 | packet.payload = &logic; |
940 | logic.length = tosend * sizeof(uint16_t); | |
941 | logic.unitsize = 2; | |
942 | logic.data = samples + sent; | |
0e1357e8 | 943 | sr_session_send(devc->session_dev_id, &packet); |
28a35d8a | 944 | |
57bbf56b HE |
945 | sent += tosend; |
946 | } | |
947 | n = 0; | |
948 | ||
949 | event = (uint16_t *) &buf[i * 16 + 2]; | |
f78898e9 HE |
950 | cur_sample = 0; |
951 | ||
952 | /* For each event in cluster. */ | |
28a35d8a | 953 | for (j = 0; j < 7; ++j) { |
f78898e9 HE |
954 | |
955 | /* For each sample in event. */ | |
0e1357e8 | 956 | for (k = 0; k < devc->samples_per_event; ++k) { |
f78898e9 HE |
957 | cur_sample = 0; |
958 | ||
959 | /* For each probe. */ | |
0e1357e8 | 960 | for (l = 0; l < devc->num_probes; ++l) |
edca2c5c | 961 | cur_sample |= (!!(event[j] & (1 << (l * |
0e1357e8 | 962 | devc->samples_per_event + k)))) << l; |
f78898e9 HE |
963 | |
964 | samples[n++] = cur_sample; | |
28a35d8a HE |
965 | } |
966 | } | |
967 | ||
eec5275e | 968 | /* Send data up to trigger point (if triggered). */ |
fefa1800 | 969 | sent = 0; |
57bbf56b HE |
970 | if (i == triggerts) { |
971 | /* | |
36b1c8e6 HE |
972 | * Trigger is not always accurate to sample because of |
973 | * pipeline delay. However, it always triggers before | |
974 | * the actual event. We therefore look at the next | |
975 | * samples to pinpoint the exact position of the trigger. | |
57bbf56b | 976 | */ |
bdfc7a89 | 977 | tosend = get_trigger_offset(samples, *lastsample, |
0e1357e8 | 978 | &devc->trigger); |
57bbf56b HE |
979 | |
980 | if (tosend > 0) { | |
5a2326a7 | 981 | packet.type = SR_DF_LOGIC; |
9c939c51 BV |
982 | packet.payload = &logic; |
983 | logic.length = tosend * sizeof(uint16_t); | |
984 | logic.unitsize = 2; | |
985 | logic.data = samples; | |
0e1357e8 | 986 | sr_session_send(devc->session_dev_id, &packet); |
57bbf56b HE |
987 | |
988 | sent += tosend; | |
989 | } | |
28a35d8a | 990 | |
5b5ea7c6 | 991 | /* Only send trigger if explicitly enabled. */ |
0e1357e8 | 992 | if (devc->use_triggers) { |
5a2326a7 | 993 | packet.type = SR_DF_TRIGGER; |
0e1357e8 | 994 | sr_session_send(devc->session_dev_id, &packet); |
5b5ea7c6 | 995 | } |
28a35d8a | 996 | } |
57bbf56b | 997 | |
eec5275e | 998 | /* Send rest of the chunk to sigrok. */ |
57bbf56b HE |
999 | tosend = n - sent; |
1000 | ||
abda62ce | 1001 | if (tosend > 0) { |
5a2326a7 | 1002 | packet.type = SR_DF_LOGIC; |
9c939c51 BV |
1003 | packet.payload = &logic; |
1004 | logic.length = tosend * sizeof(uint16_t); | |
1005 | logic.unitsize = 2; | |
1006 | logic.data = samples + sent; | |
0e1357e8 | 1007 | sr_session_send(devc->session_dev_id, &packet); |
abda62ce | 1008 | } |
ee492173 HE |
1009 | |
1010 | *lastsample = samples[n - 1]; | |
28a35d8a HE |
1011 | } |
1012 | ||
e46b8fb1 | 1013 | return SR_OK; |
28a35d8a HE |
1014 | } |
1015 | ||
1f9813eb | 1016 | static int receive_data(int fd, int revents, void *cb_data) |
28a35d8a | 1017 | { |
1f9813eb | 1018 | struct sr_dev_inst *sdi = cb_data; |
0e1357e8 | 1019 | struct dev_context *devc = sdi->priv; |
b9c735a2 | 1020 | struct sr_datafeed_packet packet; |
28a35d8a HE |
1021 | const int chunks_per_read = 32; |
1022 | unsigned char buf[chunks_per_read * CHUNK_SIZE]; | |
6aac7737 | 1023 | int bufsz, numchunks, i, newchunks; |
94ba4bd6 | 1024 | uint64_t running_msec; |
28a35d8a | 1025 | struct timeval tv; |
28a35d8a | 1026 | |
cb93f8a9 UH |
1027 | (void)fd; |
1028 | (void)revents; | |
28a35d8a | 1029 | |
805919b0 | 1030 | /* Get the current position. */ |
0e1357e8 | 1031 | sigma_read_pos(&devc->state.stoppos, &devc->state.triggerpos, devc); |
805919b0 | 1032 | |
0e1357e8 | 1033 | numchunks = (devc->state.stoppos + 511) / 512; |
28a35d8a | 1034 | |
0e1357e8 | 1035 | if (devc->state.state == SIGMA_IDLE) |
805919b0 | 1036 | return TRUE; |
28a35d8a | 1037 | |
0e1357e8 | 1038 | if (devc->state.state == SIGMA_CAPTURE) { |
6aac7737 HE |
1039 | /* Check if the timer has expired, or memory is full. */ |
1040 | gettimeofday(&tv, 0); | |
0e1357e8 BV |
1041 | running_msec = (tv.tv_sec - devc->start_tv.tv_sec) * 1000 + |
1042 | (tv.tv_usec - devc->start_tv.tv_usec) / 1000; | |
28a35d8a | 1043 | |
0e1357e8 | 1044 | if (running_msec < devc->limit_msec && numchunks < 32767) |
805919b0 | 1045 | return TRUE; /* While capturing... */ |
e3fff420 | 1046 | else |
3ffb6964 | 1047 | hw_dev_acquisition_stop(sdi, sdi); |
6aac7737 | 1048 | |
dc890b8f UH |
1049 | } |
1050 | ||
1051 | if (devc->state.state == SIGMA_DOWNLOAD) { | |
0e1357e8 | 1052 | if (devc->state.chunks_downloaded >= numchunks) { |
6aac7737 | 1053 | /* End of samples. */ |
5a2326a7 | 1054 | packet.type = SR_DF_END; |
0e1357e8 | 1055 | sr_session_send(devc->session_dev_id, &packet); |
6aac7737 | 1056 | |
0e1357e8 | 1057 | devc->state.state = SIGMA_IDLE; |
f78898e9 | 1058 | |
6aac7737 HE |
1059 | return TRUE; |
1060 | } | |
1061 | ||
1062 | newchunks = MIN(chunks_per_read, | |
0e1357e8 | 1063 | numchunks - devc->state.chunks_downloaded); |
28a35d8a | 1064 | |
47f4f073 | 1065 | sr_info("Downloading sample data: %.0f %%.", |
0e1357e8 | 1066 | 100.0 * devc->state.chunks_downloaded / numchunks); |
28a35d8a | 1067 | |
0e1357e8 BV |
1068 | bufsz = sigma_read_dram(devc->state.chunks_downloaded, |
1069 | newchunks, buf, devc); | |
719c5a93 UH |
1070 | /* TODO: Check bufsz. For now, just avoid compiler warnings. */ |
1071 | (void)bufsz; | |
28a35d8a | 1072 | |
fefa1800 | 1073 | /* Find first ts. */ |
0e1357e8 BV |
1074 | if (devc->state.chunks_downloaded == 0) { |
1075 | devc->state.lastts = *(uint16_t *) buf - 1; | |
1076 | devc->state.lastsample = 0; | |
6aac7737 | 1077 | } |
28a35d8a | 1078 | |
fefa1800 | 1079 | /* Decode chunks and send them to sigrok. */ |
28a35d8a | 1080 | for (i = 0; i < newchunks; ++i) { |
88c51afe HE |
1081 | int limit_chunk = 0; |
1082 | ||
1083 | /* The last chunk may potentially be only in part. */ | |
0e1357e8 | 1084 | if (devc->state.chunks_downloaded == numchunks - 1) { |
88c51afe | 1085 | /* Find the last valid timestamp */ |
0e1357e8 | 1086 | limit_chunk = devc->state.stoppos % 512 + devc->state.lastts; |
88c51afe HE |
1087 | } |
1088 | ||
0e1357e8 | 1089 | if (devc->state.chunks_downloaded + i == devc->state.triggerchunk) |
57bbf56b | 1090 | decode_chunk_ts(buf + (i * CHUNK_SIZE), |
0e1357e8 BV |
1091 | &devc->state.lastts, |
1092 | &devc->state.lastsample, | |
1093 | devc->state.triggerpos & 0x1ff, | |
1f9813eb | 1094 | limit_chunk, sdi); |
57bbf56b HE |
1095 | else |
1096 | decode_chunk_ts(buf + (i * CHUNK_SIZE), | |
0e1357e8 BV |
1097 | &devc->state.lastts, |
1098 | &devc->state.lastsample, | |
1f9813eb | 1099 | -1, limit_chunk, sdi); |
28a35d8a | 1100 | |
0e1357e8 | 1101 | ++devc->state.chunks_downloaded; |
88c51afe | 1102 | } |
28a35d8a HE |
1103 | } |
1104 | ||
28a35d8a HE |
1105 | return TRUE; |
1106 | } | |
1107 | ||
c53d793f HE |
1108 | /* Build a LUT entry used by the trigger functions. */ |
1109 | static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry) | |
ee492173 HE |
1110 | { |
1111 | int i, j, k, bit; | |
1112 | ||
f758d074 | 1113 | /* For each quad probe. */ |
ee492173 | 1114 | for (i = 0; i < 4; ++i) { |
c53d793f | 1115 | entry[i] = 0xffff; |
ee492173 | 1116 | |
f758d074 | 1117 | /* For each bit in LUT. */ |
ee492173 HE |
1118 | for (j = 0; j < 16; ++j) |
1119 | ||
f758d074 | 1120 | /* For each probe in quad. */ |
ee492173 HE |
1121 | for (k = 0; k < 4; ++k) { |
1122 | bit = 1 << (i * 4 + k); | |
1123 | ||
c53d793f HE |
1124 | /* Set bit in entry */ |
1125 | if ((mask & bit) && | |
1126 | ((!(value & bit)) != | |
4ae1f451 | 1127 | (!(j & (1 << k))))) |
c53d793f | 1128 | entry[i] &= ~(1 << j); |
ee492173 HE |
1129 | } |
1130 | } | |
c53d793f | 1131 | } |
ee492173 | 1132 | |
c53d793f HE |
1133 | /* Add a logical function to LUT mask. */ |
1134 | static void add_trigger_function(enum triggerop oper, enum triggerfunc func, | |
1135 | int index, int neg, uint16_t *mask) | |
1136 | { | |
1137 | int i, j; | |
1138 | int x[2][2], tmp, a, b, aset, bset, rset; | |
1139 | ||
1140 | memset(x, 0, 4 * sizeof(int)); | |
1141 | ||
1142 | /* Trigger detect condition. */ | |
1143 | switch (oper) { | |
1144 | case OP_LEVEL: | |
1145 | x[0][1] = 1; | |
1146 | x[1][1] = 1; | |
1147 | break; | |
1148 | case OP_NOT: | |
1149 | x[0][0] = 1; | |
1150 | x[1][0] = 1; | |
1151 | break; | |
1152 | case OP_RISE: | |
1153 | x[0][1] = 1; | |
1154 | break; | |
1155 | case OP_FALL: | |
1156 | x[1][0] = 1; | |
1157 | break; | |
1158 | case OP_RISEFALL: | |
1159 | x[0][1] = 1; | |
1160 | x[1][0] = 1; | |
1161 | break; | |
1162 | case OP_NOTRISE: | |
1163 | x[1][1] = 1; | |
1164 | x[0][0] = 1; | |
1165 | x[1][0] = 1; | |
1166 | break; | |
1167 | case OP_NOTFALL: | |
1168 | x[1][1] = 1; | |
1169 | x[0][0] = 1; | |
1170 | x[0][1] = 1; | |
1171 | break; | |
1172 | case OP_NOTRISEFALL: | |
1173 | x[1][1] = 1; | |
1174 | x[0][0] = 1; | |
1175 | break; | |
1176 | } | |
1177 | ||
1178 | /* Transpose if neg is set. */ | |
1179 | if (neg) { | |
ea9cfed7 | 1180 | for (i = 0; i < 2; ++i) { |
c53d793f HE |
1181 | for (j = 0; j < 2; ++j) { |
1182 | tmp = x[i][j]; | |
1183 | x[i][j] = x[1-i][1-j]; | |
1184 | x[1-i][1-j] = tmp; | |
1185 | } | |
ea9cfed7 | 1186 | } |
c53d793f HE |
1187 | } |
1188 | ||
1189 | /* Update mask with function. */ | |
1190 | for (i = 0; i < 16; ++i) { | |
1191 | a = (i >> (2 * index + 0)) & 1; | |
1192 | b = (i >> (2 * index + 1)) & 1; | |
1193 | ||
1194 | aset = (*mask >> i) & 1; | |
1195 | bset = x[b][a]; | |
1196 | ||
1197 | if (func == FUNC_AND || func == FUNC_NAND) | |
1198 | rset = aset & bset; | |
1199 | else if (func == FUNC_OR || func == FUNC_NOR) | |
1200 | rset = aset | bset; | |
1201 | else if (func == FUNC_XOR || func == FUNC_NXOR) | |
1202 | rset = aset ^ bset; | |
1203 | ||
1204 | if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR) | |
1205 | rset = !rset; | |
1206 | ||
1207 | *mask &= ~(1 << i); | |
1208 | ||
1209 | if (rset) | |
1210 | *mask |= 1 << i; | |
1211 | } | |
1212 | } | |
1213 | ||
1214 | /* | |
1215 | * Build trigger LUTs used by 50 MHz and lower sample rates for supporting | |
1216 | * simple pin change and state triggers. Only two transitions (rise/fall) can be | |
1217 | * set at any time, but a full mask and value can be set (0/1). | |
1218 | */ | |
0e1357e8 | 1219 | static int build_basic_trigger(struct triggerlut *lut, struct dev_context *devc) |
c53d793f HE |
1220 | { |
1221 | int i,j; | |
4ae1f451 | 1222 | uint16_t masks[2] = { 0, 0 }; |
c53d793f HE |
1223 | |
1224 | memset(lut, 0, sizeof(struct triggerlut)); | |
1225 | ||
1226 | /* Contant for simple triggers. */ | |
1227 | lut->m4 = 0xa000; | |
1228 | ||
1229 | /* Value/mask trigger support. */ | |
0e1357e8 | 1230 | build_lut_entry(devc->trigger.simplevalue, devc->trigger.simplemask, |
99965709 | 1231 | lut->m2d); |
c53d793f HE |
1232 | |
1233 | /* Rise/fall trigger support. */ | |
1234 | for (i = 0, j = 0; i < 16; ++i) { | |
0e1357e8 BV |
1235 | if (devc->trigger.risingmask & (1 << i) || |
1236 | devc->trigger.fallingmask & (1 << i)) | |
c53d793f HE |
1237 | masks[j++] = 1 << i; |
1238 | } | |
1239 | ||
1240 | build_lut_entry(masks[0], masks[0], lut->m0d); | |
1241 | build_lut_entry(masks[1], masks[1], lut->m1d); | |
1242 | ||
1243 | /* Add glue logic */ | |
1244 | if (masks[0] || masks[1]) { | |
1245 | /* Transition trigger. */ | |
0e1357e8 | 1246 | if (masks[0] & devc->trigger.risingmask) |
c53d793f | 1247 | add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3); |
0e1357e8 | 1248 | if (masks[0] & devc->trigger.fallingmask) |
c53d793f | 1249 | add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3); |
0e1357e8 | 1250 | if (masks[1] & devc->trigger.risingmask) |
c53d793f | 1251 | add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3); |
0e1357e8 | 1252 | if (masks[1] & devc->trigger.fallingmask) |
c53d793f HE |
1253 | add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3); |
1254 | } else { | |
1255 | /* Only value/mask trigger. */ | |
1256 | lut->m3 = 0xffff; | |
1257 | } | |
ee492173 | 1258 | |
c53d793f | 1259 | /* Triggertype: event. */ |
ee492173 HE |
1260 | lut->params.selres = 3; |
1261 | ||
e46b8fb1 | 1262 | return SR_OK; |
ee492173 HE |
1263 | } |
1264 | ||
3ffb6964 BV |
1265 | static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi, |
1266 | void *cb_data) | |
28a35d8a | 1267 | { |
0e1357e8 | 1268 | struct dev_context *devc; |
9ddb2a12 | 1269 | struct clockselect_50 clockselect; |
82957b65 | 1270 | int frac, triggerpin, ret; |
f4abaa9f | 1271 | uint8_t triggerselect = 0; |
57bbf56b | 1272 | struct triggerinout triggerinout_conf; |
ee492173 | 1273 | struct triggerlut lut; |
28a35d8a | 1274 | |
0e1357e8 | 1275 | devc = sdi->priv; |
28a35d8a | 1276 | |
014359e3 | 1277 | if (configure_probes(sdi) != SR_OK) { |
47f4f073 | 1278 | sr_err("Failed to configure probes."); |
014359e3 BV |
1279 | return SR_ERR; |
1280 | } | |
1281 | ||
ea9cfed7 | 1282 | /* If the samplerate has not been set, default to 200 kHz. */ |
0e1357e8 | 1283 | if (devc->cur_firmware == -1) { |
82957b65 UH |
1284 | if ((ret = set_samplerate(sdi, SR_KHZ(200))) != SR_OK) |
1285 | return ret; | |
1286 | } | |
e8397563 | 1287 | |
eec5275e | 1288 | /* Enter trigger programming mode. */ |
0e1357e8 | 1289 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x20, devc); |
28a35d8a | 1290 | |
eec5275e | 1291 | /* 100 and 200 MHz mode. */ |
0e1357e8 BV |
1292 | if (devc->cur_samplerate >= SR_MHZ(100)) { |
1293 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x81, devc); | |
57bbf56b | 1294 | |
a42aec7f HE |
1295 | /* Find which pin to trigger on from mask. */ |
1296 | for (triggerpin = 0; triggerpin < 8; ++triggerpin) | |
0e1357e8 | 1297 | if ((devc->trigger.risingmask | devc->trigger.fallingmask) & |
a42aec7f HE |
1298 | (1 << triggerpin)) |
1299 | break; | |
1300 | ||
1301 | /* Set trigger pin and light LED on trigger. */ | |
1302 | triggerselect = (1 << LEDSEL1) | (triggerpin & 0x7); | |
1303 | ||
1304 | /* Default rising edge. */ | |
0e1357e8 | 1305 | if (devc->trigger.fallingmask) |
a42aec7f | 1306 | triggerselect |= 1 << 3; |
57bbf56b | 1307 | |
eec5275e | 1308 | /* All other modes. */ |
0e1357e8 BV |
1309 | } else if (devc->cur_samplerate <= SR_MHZ(50)) { |
1310 | build_basic_trigger(&lut, devc); | |
ee492173 | 1311 | |
0e1357e8 | 1312 | sigma_write_trigger_lut(&lut, devc); |
57bbf56b HE |
1313 | |
1314 | triggerselect = (1 << LEDSEL1) | (1 << LEDSEL0); | |
1315 | } | |
1316 | ||
eec5275e | 1317 | /* Setup trigger in and out pins to default values. */ |
57bbf56b HE |
1318 | memset(&triggerinout_conf, 0, sizeof(struct triggerinout)); |
1319 | triggerinout_conf.trgout_bytrigger = 1; | |
1320 | triggerinout_conf.trgout_enable = 1; | |
1321 | ||
28a35d8a | 1322 | sigma_write_register(WRITE_TRIGGER_OPTION, |
57bbf56b | 1323 | (uint8_t *) &triggerinout_conf, |
0e1357e8 | 1324 | sizeof(struct triggerinout), devc); |
28a35d8a | 1325 | |
eec5275e | 1326 | /* Go back to normal mode. */ |
0e1357e8 | 1327 | sigma_set_register(WRITE_TRIGGER_SELECT1, triggerselect, devc); |
28a35d8a | 1328 | |
edca2c5c | 1329 | /* Set clock select register. */ |
0e1357e8 | 1330 | if (devc->cur_samplerate == SR_MHZ(200)) |
edca2c5c | 1331 | /* Enable 4 probes. */ |
0e1357e8 BV |
1332 | sigma_set_register(WRITE_CLOCK_SELECT, 0xf0, devc); |
1333 | else if (devc->cur_samplerate == SR_MHZ(100)) | |
edca2c5c | 1334 | /* Enable 8 probes. */ |
0e1357e8 | 1335 | sigma_set_register(WRITE_CLOCK_SELECT, 0x00, devc); |
edca2c5c HE |
1336 | else { |
1337 | /* | |
9ddb2a12 | 1338 | * 50 MHz mode (or fraction thereof). Any fraction down to |
eec5275e | 1339 | * 50 MHz / 256 can be used, but is not supported by sigrok API. |
edca2c5c | 1340 | */ |
0e1357e8 | 1341 | frac = SR_MHZ(50) / devc->cur_samplerate - 1; |
edca2c5c | 1342 | |
9ddb2a12 UH |
1343 | clockselect.async = 0; |
1344 | clockselect.fraction = frac; | |
1345 | clockselect.disabled_probes = 0; | |
edca2c5c HE |
1346 | |
1347 | sigma_write_register(WRITE_CLOCK_SELECT, | |
9ddb2a12 | 1348 | (uint8_t *) &clockselect, |
0e1357e8 | 1349 | sizeof(clockselect), devc); |
edca2c5c HE |
1350 | } |
1351 | ||
fefa1800 | 1352 | /* Setup maximum post trigger time. */ |
99965709 | 1353 | sigma_set_register(WRITE_POST_TRIGGER, |
0e1357e8 | 1354 | (devc->capture_ratio * 255) / 100, devc); |
28a35d8a | 1355 | |
eec5275e | 1356 | /* Start acqusition. */ |
0e1357e8 BV |
1357 | gettimeofday(&devc->start_tv, 0); |
1358 | sigma_set_register(WRITE_MODE, 0x0d, devc); | |
99965709 | 1359 | |
0e1357e8 | 1360 | devc->session_dev_id = cb_data; |
28a35d8a | 1361 | |
3c36c403 | 1362 | /* Send header packet to the session bus. */ |
4afdfd46 | 1363 | std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN); |
f366e86c | 1364 | |
f366e86c | 1365 | /* Add capture source. */ |
3ffb6964 | 1366 | sr_source_add(0, G_IO_IN, 10, receive_data, (void *)sdi); |
f366e86c | 1367 | |
0e1357e8 | 1368 | devc->state.state = SIGMA_CAPTURE; |
6aac7737 | 1369 | |
e46b8fb1 | 1370 | return SR_OK; |
28a35d8a HE |
1371 | } |
1372 | ||
69b07d14 | 1373 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) |
28a35d8a | 1374 | { |
0e1357e8 | 1375 | struct dev_context *devc; |
6aac7737 HE |
1376 | uint8_t modestatus; |
1377 | ||
3cd3a20b | 1378 | (void)cb_data; |
28a35d8a | 1379 | |
503c4afb BV |
1380 | sr_source_remove(0); |
1381 | ||
0e1357e8 | 1382 | if (!(devc = sdi->priv)) { |
47f4f073 | 1383 | sr_err("%s: sdi->priv was NULL", __func__); |
3010f21c UH |
1384 | return SR_ERR_BUG; |
1385 | } | |
1386 | ||
fefa1800 | 1387 | /* Stop acquisition. */ |
0e1357e8 | 1388 | sigma_set_register(WRITE_MODE, 0x11, devc); |
28a35d8a | 1389 | |
6aac7737 | 1390 | /* Set SDRAM Read Enable. */ |
0e1357e8 | 1391 | sigma_set_register(WRITE_MODE, 0x02, devc); |
6aac7737 HE |
1392 | |
1393 | /* Get the current position. */ | |
0e1357e8 | 1394 | sigma_read_pos(&devc->state.stoppos, &devc->state.triggerpos, devc); |
6aac7737 HE |
1395 | |
1396 | /* Check if trigger has fired. */ | |
0e1357e8 | 1397 | modestatus = sigma_get_register(READ_MODE, devc); |
3010f21c | 1398 | if (modestatus & 0x20) |
0e1357e8 | 1399 | devc->state.triggerchunk = devc->state.triggerpos / 512; |
3010f21c | 1400 | else |
0e1357e8 | 1401 | devc->state.triggerchunk = -1; |
6aac7737 | 1402 | |
0e1357e8 | 1403 | devc->state.chunks_downloaded = 0; |
6aac7737 | 1404 | |
0e1357e8 | 1405 | devc->state.state = SIGMA_DOWNLOAD; |
3010f21c UH |
1406 | |
1407 | return SR_OK; | |
28a35d8a HE |
1408 | } |
1409 | ||
c09f0b57 | 1410 | SR_PRIV struct sr_dev_driver asix_sigma_driver_info = { |
e519ba86 | 1411 | .name = "asix-sigma", |
6352d030 | 1412 | .longname = "ASIX SIGMA/SIGMA2", |
e519ba86 UH |
1413 | .api_version = 1, |
1414 | .init = hw_init, | |
1415 | .cleanup = hw_cleanup, | |
61136ea6 | 1416 | .scan = hw_scan, |
811deee4 BV |
1417 | .dev_list = hw_dev_list, |
1418 | .dev_clear = clear_instances, | |
035a1078 BV |
1419 | .config_get = config_get, |
1420 | .config_set = config_set, | |
a1c743fc | 1421 | .config_list = config_list, |
e7eb703f UH |
1422 | .dev_open = hw_dev_open, |
1423 | .dev_close = hw_dev_close, | |
6b3dfec8 UH |
1424 | .dev_acquisition_start = hw_dev_acquisition_start, |
1425 | .dev_acquisition_stop = hw_dev_acquisition_stop, | |
0e1357e8 | 1426 | .priv = NULL, |
28a35d8a | 1427 | }; |