# The path where your Android toolchain directory is located.
TOOLCHAIN=$HOME/android/android-arm-toolchain
+# TOOLCHAIN=$HOME/android/android-mipsel-toolchain
+# TOOLCHAIN=$HOME/android/android-i686-toolchain
+
+# Select which Android toolchain to use.
+# Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
+TOOLCHAIN_TRIPLET=arm-linux-androideabi
+# TOOLCHAIN_TRIPLET=mipsel-linux-android
+# TOOLCHAIN_TRIPLET=i686-linux-android
# The path where the cross-compiled packages will be installed.
PREFIX=$HOME/sr_android
# The path where to download files to and where to build packages.
-BUILDDIR=./sr_android_build
+BUILDDIR=./build
+
+# Edit this to enable/disable/modify parallel compiles.
+PARALLEL="-j 2"
# You usually don't need to change anything below this line.
VER_ZLIB=1.2.8
VER_PCRE=8.33
VER_LIBFFI=3.0.13
-VER_GLIB=2.34.3
+VER_GLIB=2.38.2
+VER_GLIB_SHORT=2.38
VER_LIBZIP=0.11.1
VER_LIBUSB=0.1.12
VER_LIBFTDI=0.20
-VER_LIBUSB_1_0=1.0.9
+VER_LIBUSBX=1.0.17
VER_PYTHON=3.3.3
SF_MIRROR=switch.dl.sourceforge.net
+WGET="wget --quiet"
+GIT_CLONE="git clone --depth=1"
+
# -----------------------------------------------------------------------------
# Remove build directory contents (if any) and create a new build dir.
cd $BUILDDIR
# Build host Python before we start messing with the environment.
-wget http://python.org/ftp/python/$VER_PYTHON/Python-3.3.3.tar.xz
+$WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
tar xJf Python-$VER_PYTHON.tar.xz
cd Python-$VER_PYTHON
./configure
-make python
-make Parser/pgen
+make python $PARALLEL
+make Parser/pgen $PARALLEL
mv python hostpython
mv Parser/pgen Parser/hostpgen
cd ..
export -n PKG_CONFIG_PATH
# Define some helper variables.
-C="--host=arm-linux-androideabi --prefix=$PREFIX"
-
-# Remember the directory we're in.
-case "$0" in
- /*) TOP=$(dirname "$0");;
- *) TOP=$(dirname "$(pwd)"/"$0");;
-esac
+C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
# Get the latest versions of config.guess/config.sub that know about Android.
-git clone git://git.savannah.gnu.org/config.git
+$GIT_CLONE git://git.savannah.gnu.org/config.git
# -----------------------------------------------------------------------------
+# Python (needed for libsigrokdecode)
+cd Python-$VER_PYTHON
+make distclean
+autoreconf
+patch -p1 < ../../Python-$VER_PYTHON.patch
+ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
+make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install $PARALLEL
+cd ..
+
# libiconv (needed for glib)
-wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
+$WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
tar xfz libiconv-$VER_LIBICONV.tar.gz
cd libiconv-$VER_LIBICONV
cp -f ../config/config.guess build-aux
./configure $C --enable-shared
make lib/localcharset.h
cd libcharset
-make
+make $PARALLEL
make install
cd ../lib
-make
+make $PARALLEL
make install
cd ..
test -d $PREFIX/include || mkdir $PREFIX/include
cd ..
# gettext (needed for glib)
-wget http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
+$WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
tar xfz gettext-$VER_GETTEXT.tar.gz
cd gettext-$VER_GETTEXT
./configure $C --enable-shared --disable-libasprintf
cd gettext-runtime
-make
+make $PARALLEL
make install
cd ../..
# zlib (needed for glib and libzip)
-wget http://zlib.net/zlib-$VER_ZLIB.tar.gz
+$WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
tar xfvz zlib-$VER_ZLIB.tar.gz
cd zlib-$VER_ZLIB
# Note: zlib's configure doesn't understand --host, we need to pass $CC.
-CC=arm-linux-androideabi-gcc ./configure --prefix=$PREFIX
-make
+CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
+make $PARALLEL
make install
cd ..
# pcre (needed for glib)
-wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
+$WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
tar xfvz pcre-$VER_PCRE.tar.gz
cd pcre-$VER_PCRE
./configure $C --disable-cpp
-make
+make $PARALLEL
make install
cd ..
# libffi (needed for glib)
-wget ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
+$WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
tar xfz libffi-$VER_LIBFFI.tar.gz
cd libffi-$VER_LIBFFI
./configure $C
-make
+make $PARALLEL
make install
cd ..
# glib
-wget http://ftp.gnome.org/pub/gnome/sources/glib/2.38/glib-2.38.2.tar.xz
-tar xJf glib-2.38.2.tar.xz
-cd glib-2.38.2
+$WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
+tar xJf glib-$VER_GLIB.tar.xz
+cd glib-$VER_GLIB
./autogen.sh
# Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
-LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure $C
-make
+LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
+make $PARALLEL
make install
cd ..
# libzip
-wget http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
+$WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
tar xfz libzip-$VER_LIBZIP.tar.gz
cd libzip-$VER_LIBZIP
cp -f ../config/config.guess .
cp -f ../config/config.sub .
./configure $C
-make
+make $PARALLEL
make install
cd ..
# libusb-0.1 (not used directly, but needed for libftdi)
-wget http://$SF_MIRROR/project/libusb/libusb-0.1%20%28LEGACY%29/$VER_LIBUSB/libusb-$VER_LIBUSB.tar.gz
+$WGET http://$SF_MIRROR/project/libusb/libusb-0.1%20%28LEGACY%29/$VER_LIBUSB/libusb-$VER_LIBUSB.tar.gz
tar xfz libusb-$VER_LIBUSB.tar.gz
cd libusb-$VER_LIBUSB
cp -f ../config/config.guess .
cp -f ../config/config.sub .
./configure $C
# Explicitly exclude libusbpp.la from lib_LTLIBRARIES, and skip subdirs.
-make lib_LTLIBRARIES=libusb.la SUBDIRS=.
+make lib_LTLIBRARIES=libusb.la SUBDIRS=. $PARALLEL
make lib_LTLIBRARIES=libusb.la SUBDIRS=. install
cd ..
# libftdi
-wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-$VER_LIBFTDI.tar.gz
+$WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi-$VER_LIBFTDI.tar.gz
tar xfz libftdi-$VER_LIBFTDI.tar.gz
cd libftdi-$VER_LIBFTDI
cp -f ../config/config.guess .
cp -f ../config/config.sub .
# libftdi needs to find libusb-config which is installed in $PREFIX/bin.
PATH=$PREFIX/bin:$PATH ./configure $C
-make
+make $PARALLEL
make install
cd ..
# libusb-1.0
-wget http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB_1_0/libusb-$VER_LIBUSB_1_0.tar.bz2
-tar xfj libusb-$VER_LIBUSB_1_0.tar.bz2
-cd libusb-$VER_LIBUSB_1_0
-patch -p1 < $TOP/libusb-1.0.patch
-./configure $C
-make
+$WGET http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
+tar xfj libusbx-$VER_LIBUSBX.tar.bz2
+cd libusbx-$VER_LIBUSBX
+patch -p1 < ../../libusb-1.0.patch
+./configure $C --disable-udev
+make $PARALLEL
make install
cd ..
# libserialport
-git clone git://sigrok.org/libserialport
+$GIT_CLONE git://sigrok.org/libserialport
cd libserialport
./autogen.sh
./configure $C --without-libudev
-make
+make $PARALLEL V=1
make install
cd ..
# libsigrok
-git clone git://sigrok.org/libsigrok
+$GIT_CLONE git://sigrok.org/libsigrok
cd libsigrok
./autogen.sh
./configure $C
-make
+make $PARALLEL V=1
make install
cd ..
-# Python
-cd Python-$VER_PYTHON
-make distclean
-autoreconf
-patch -p1 < ../../Python-$VER_PYTHON.patch
-ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
-make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install
-cd ..
-
# libsigrokdecode
-git clone git://sigrok.org/libsigrokdecode
+$GIT_CLONE git://sigrok.org/libsigrokdecode
cd libsigrokdecode
./autogen.sh
./configure $C
-make
+make $PARALLEL V=1
make install
cd ..
# sigrok-cli
-git clone git://sigrok.org/sigrok-cli
+$GIT_CLONE git://sigrok.org/sigrok-cli
cd sigrok-cli
./autogen.sh
./configure $C
-make
+make $PARALLEL V=1
make install
cd ..
+