sigrok-cross-android: Add/use $VER_GLIB.

[sigrok-util.git] / cross-compile / android / sigrok-cross-android

diff --git a/cross-compile/android/sigrok-cross-android b/cross-compile/android/sigrok-cross-android
index c6bd5bccef67a67aa4ec8606143b9d8de9c3a3ec..86a64b75793c2fac3865af3c58e177cadf32a048 100755 (executable)
--- a/cross-compile/android/sigrok-cross-android
+++ b/cross-compile/android/sigrok-cross-android
@@ -23,6 +23,14 @@ set -e
 
 # The path where your Android toolchain directory is located.
 TOOLCHAIN=$HOME/android/android-arm-toolchain
+# TOOLCHAIN=$HOME/android/android-mipsel-toolchain
+# TOOLCHAIN=$HOME/android/android-i686-toolchain
+
+# Select which Android toolchain to use.
+# Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
+TOOLCHAIN_TRIPLET=arm-linux-androideabi
+# TOOLCHAIN_TRIPLET=mipsel-linux-android
+# TOOLCHAIN_TRIPLET=i686-linux-android
 
 # The path where the cross-compiled packages will be installed.
 PREFIX=$HOME/sr_android
@@ -39,11 +47,13 @@ VER_GETTEXT=0.18.3
 VER_ZLIB=1.2.8
 VER_PCRE=8.33
 VER_LIBFFI=3.0.13
-VER_GLIB=2.34.3
+VER_GLIB=2.38.2
+VER_GLIB_SHORT=2.38
 VER_LIBZIP=0.11.1
 VER_LIBUSB=0.1.12
 VER_LIBFTDI=0.20
-VER_LIBUSB_1_0=1.0.9
+VER_LIBUSBX=1.0.17
+VER_PYTHON=3.3.3
 
 SF_MIRROR=switch.dl.sourceforge.net
 
@@ -55,9 +65,9 @@ mkdir $BUILDDIR
 cd $BUILDDIR
 
 # Build host Python before we start messing with the environment.
-wget http://python.org/ftp/python/3.3.3/Python-3.3.3.tar.xz
-tar xJf Python-3.3.3.tar.xz
-cd Python-3.3.3
+wget http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
+tar xJf Python-$VER_PYTHON.tar.xz
+cd Python-$VER_PYTHON
 ./configure
 make python
 make Parser/pgen
@@ -75,19 +85,22 @@ export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
 export -n PKG_CONFIG_PATH
 
 # Define some helper variables.
-C="--host=arm-linux-androideabi --prefix=$PREFIX"
-
-# Remember the directory we're in.
-case "$0" in
-  /*) TOP=$(dirname "$0");;
-  *) TOP=$(dirname "$(pwd)"/"$0");;
-esac
+C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
 
 # Get the latest versions of config.guess/config.sub that know about Android.
 git clone git://git.savannah.gnu.org/config.git
 
 # -----------------------------------------------------------------------------
 
+# Python (needed for libsigrokdecode)
+cd Python-$VER_PYTHON
+make distclean
+autoreconf
+patch -p1 < ../../Python-$VER_PYTHON.patch
+ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
+make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install
+cd ..
+
 # libiconv (needed for glib)
 wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
 tar xfz libiconv-$VER_LIBICONV.tar.gz
@@ -124,7 +137,7 @@ wget http://zlib.net/zlib-$VER_ZLIB.tar.gz
 tar xfvz zlib-$VER_ZLIB.tar.gz
 cd zlib-$VER_ZLIB
 # Note: zlib's configure doesn't understand --host, we need to pass $CC.
-CC=arm-linux-androideabi-gcc ./configure --prefix=$PREFIX
+CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
 make
 make install
 cd ..
@@ -148,12 +161,12 @@ make install
 cd ..
 
 # glib
-wget http://ftp.gnome.org/pub/gnome/sources/glib/2.38/glib-2.38.2.tar.xz
-tar xJf glib-2.38.2.tar.xz
-cd glib-2.38.2
+wget http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
+tar xJf glib-$VER_GLIB.tar.xz
+cd glib-$VER_GLIB
 ./autogen.sh
 # Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
-LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure $C
+LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
 make
 make install
 cd ..
@@ -187,17 +200,27 @@ tar xfz libftdi-$VER_LIBFTDI.tar.gz
 cd libftdi-$VER_LIBFTDI
 cp -f ../config/config.guess .
 cp -f ../config/config.sub .
-./configure $C
+# libftdi needs to find libusb-config which is installed in $PREFIX/bin.
+PATH=$PREFIX/bin:$PATH ./configure $C
 make
 make install
 cd ..
 
 # libusb-1.0
-wget http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB_1_0/libusb-$VER_LIBUSB_1_0.tar.bz2
-tar xfj libusb-$VER_LIBUSB_1_0.tar.bz2
-cd libusb-$VER_LIBUSB_1_0
-patch -p1 < $TOP/libusb-1.0.patch
-./configure $C
+wget http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
+tar xfj libusbx-$VER_LIBUSBX.tar.bz2
+cd libusbx-$VER_LIBUSBX
+patch -p1 < ../../libusb-1.0.patch
+./configure $C --disable-udev
+make
+make install
+cd ..
+
+# libserialport
+git clone git://sigrok.org/libserialport
+cd libserialport
+./autogen.sh
+./configure $C --without-libudev
 make
 make install
 cd ..
@@ -211,15 +234,6 @@ make
 make install
 cd ..
 
-# Python
-cd Python-3.3.3
-make distclean
-autoreconf
-patch -p1 < ../../Python-3.3.3.patch
-ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
-make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install
-cd ..
-
 # libsigrokdecode
 git clone git://sigrok.org/libsigrokdecode
 cd libsigrokdecode