##
## This file is part of the sigrok-util project.
##
-## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2013-2014 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
set -e
+# The path where the NDK, SDK, and toolchains are located.
+ANDROID_PATH=$HOME/android
+
# The path where the Android NDK is located.
-ANDROID_NDK=$HOME/android/android-ndk-r9d
+ANDROID_NDK=$ANDROID_PATH/android-ndk-r10c
# The path where the Android SDK is located.
-ANDROID_SDK=$HOME/android/android-sdk-linux
+ANDROID_SDK=$ANDROID_PATH/android-sdk-linux
# The path where your Android toolchain directory is located.
-TOOLCHAIN=$HOME/android/android-arm-toolchain
-# TOOLCHAIN=$HOME/android/android-mipsel-toolchain
-# TOOLCHAIN=$HOME/android/android-i686-toolchain
+TOOLCHAIN=$ANDROID_PATH/android-arm-toolchain
+# TOOLCHAIN=$ANDROID_PATH/android-mipsel-toolchain
+# TOOLCHAIN=$ANDROID_PATH/android-i686-toolchain
# Select which Android toolchain to use.
# Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
# -----------------------------------------------------------------------------
VER_LIBICONV=1.14
-VER_GETTEXT=0.18.3
+VER_GETTEXT=0.19.2
VER_ZLIB=1.2.8
-VER_PCRE=8.33
-VER_LIBFFI=3.0.13
-VER_GLIB=2.38.2
-VER_GLIB_SHORT=2.38
-VER_LIBZIP=0.11.1
+VER_PCRE=8.35
+VER_LIBFFI=3.1
+VER_GLIB=2.41.3
+VER_GLIB_SHORT=2.41
+VER_LIBSIGCXX=2.3.2
+VER_LIBSIGCXX_SHORT=2.3
+VER_LIBZIP=0.11.2
VER_LIBFTDI1=1.1
-VER_LIBUSBX=1.0.17
+VER_LIBUSB=1.0.19
VER_PYTHON=3.3.3
VER_BOOST=1.55.0
VER_QT=5.3.1
+VER_NDK=10c
+VER_SDK=23.0.2
SF_MIRROR=switch.dl.sourceforge.net
# -----------------------------------------------------------------------------
+# Get the Android NDK and SDK, install required packages and toolchains.
+if [ "x$1" = "xprepare" ]; then
+ mkdir -p $ANDROID_PATH
+ cd $ANDROID_PATH
+
+ # NDK
+ $WGET http://dl.google.com/android/ndk/android-ndk-r$VER_NDK-linux-x86.bin
+ chmod 700 android-ndk-r$VER_NDK-linux-x86.bin
+ ./android-ndk-r$VER_NDK-linux-x86.bin
+ cd android-ndk-r$VER_NDK
+ ./build/tools/make-standalone-toolchain.sh --platform=android-16 \
+ --toolchain=arm-linux-androideabi-4.9 \
+ --install-dir=$ANDROID_PATH/android-arm-toolchain
+ cd ..
+
+ # SDK
+ $WGET http://dl.google.com/android/android-sdk_r$VER_SDK-linux.tgz
+ tar xfz android-sdk_r$VER_SDK-linux.tgz
+ cd android-sdk-linux
+ ./tools/android update sdk --no-ui --filter platform-tools,build-tools-21.1.0,android-8,android-10,android-11,android-14,android-16
+ cd ..
+
+ exit
+fi
+
+# -----------------------------------------------------------------------------
+
# Remove build directory contents (if any) and create a new build dir.
rm -rf $BUILDDIR
mkdir $BUILDDIR
# Build host Python before we start messing with the environment.
# Don't do parallel builds, this doesn't seem to work well.
$WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
-tar xJf Python-$VER_PYTHON.tar.xz
+tar xfJ Python-$VER_PYTHON.tar.xz
cd Python-$VER_PYTHON
./configure
make python
C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX} -DANDROID_STANDALONE_TOOLCHAIN=${TOOLCHAIN}"
+# Look for STL, needed to build bindings
+NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
+STL_BASE="${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}"
+if [ -d ${STL_BASE}/include ]; then
+ CPPFLAGS_STL="-I${STL_BASE}/include -I${STL_BASE}/libs/${TARGET_ARCH}/include"
+ LDFLAGS_STL="-L${STL_BASE}/libs/${TARGET_ARCH} -Wl,-rpath=${STL_BASE}/libs/${TARGET_ARCH}"
+ BINDINGS_CONFIG="--enable-bindings"
+else
+ echo "Warning: STL unavailable, libsigrok bindings will not be built."
+ CPPFLAGS_STL=
+ LDFLAGS_STL=
+ BINDINGS_CONFIG="--disable-bindings"
+fi
+
# -----------------------------------------------------------------------------
# Get the latest versions of config.guess/config.sub that know about Android.
# zlib (needed for glib and libzip)
$WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
-tar xfvz zlib-$VER_ZLIB.tar.gz
+tar xfz zlib-$VER_ZLIB.tar.gz
cd zlib-$VER_ZLIB
# Note: zlib's configure doesn't understand --host, we need to pass $CC.
CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
# pcre (needed for glib)
$WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
-tar xfvz pcre-$VER_PCRE.tar.gz
+tar xfz pcre-$VER_PCRE.tar.gz
cd pcre-$VER_PCRE
./configure $C --disable-cpp
make $PARALLEL
# glib (needed for libsigrok)
$WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
-tar xJf glib-$VER_GLIB.tar.xz
+tar xfJ glib-$VER_GLIB.tar.xz
cd glib-$VER_GLIB
./autogen.sh
# Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
cd ..
# libusb-1.0 (needed for libsigrok)
-$WGET http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
-tar xfj libusbx-$VER_LIBUSBX.tar.bz2
-cd libusbx-$VER_LIBUSBX
+$WGET http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB/libusb-$VER_LIBUSB.tar.bz2
+tar xfj libusb-$VER_LIBUSB.tar.bz2
+cd libusb-$VER_LIBUSB
patch -p1 < ../../libusb-1.0.patch
./configure $C --disable-udev
make $PARALLEL
$WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2
tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2
cd libftdi1-$VER_LIBFTDI1
-cmake $CM .
+cmake $CM -DFTDIPP=no -DDOCUMENTATION=no -DEXAMPLES=no -DFTDI_EEPROM=no -DPYTHON_BINDINGS=no .
make $PARALLEL
make install
cd ..
$GIT_CLONE git://sigrok.org/libserialport
cd libserialport
./autogen.sh
-./configure $C
+mkdir build
+cd build
+../configure $C
make $PARALLEL V=1
make install
-cd ..
+cd ../..
+
+# Build dependencies for libsigrok bindings if needed
+
+if [ x"$CPPFLAGS_STL" != x ]; then
+
+ # libsigc++ (needed for glibmm)
+ $WGET http://ftp.gnome.org/pub/gnome/sources/libsigc++/$VER_LIBSIGCXX_SHORT/libsigc++-$VER_LIBSIGCXX.tar.xz
+ tar xfJ libsigc++-$VER_LIBSIGCXX.tar.xz
+ cd libsigc++-$VER_LIBSIGCXX
+ cp -f ../config/config.guess build
+ cp -f ../config/config.sub build
+ CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
+ make $PARALLEL
+ make install
+ cd ..
+
+ # glibmm (needed for libsigrok bindings)
+ $WGET http://ftp.gnome.org/pub/gnome/sources/glibmm/$VER_GLIB_SHORT/glibmm-$VER_GLIB.tar.xz
+ tar xfJ glibmm-$VER_GLIB.tar.xz
+ cd glibmm-$VER_GLIB
+ CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
+ make $PARALLEL
+ make install
+ cd ..
+
+fi
# libsigrok
$GIT_CLONE git://sigrok.org/libsigrok
cd libsigrok
./autogen.sh
-./configure $C --datadir=/sdcard
+mkdir build
+cd build
+CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL" ../configure $C $BINDINGS_CONFIG --datadir=/sdcard
make $PARALLEL V=1
-make install
-cd ..
+make datadir='$(datarootdir)' install
+cd ../..
# libsigrokdecode
$GIT_CLONE git://sigrok.org/libsigrokdecode
cd libsigrokdecode
./autogen.sh
-./configure $C
+mkdir build
+cd build
+../configure $C
make $PARALLEL V=1
make install
-cd ..
+cd ../..
# sigrok-cli
$GIT_CLONE git://sigrok.org/sigrok-cli
cd sigrok-cli
./autogen.sh
-./configure $C
+mkdir build
+cd build
+../configure $C
make $PARALLEL V=1
make install
-cd ..
+cd ../..
# Check if we have all requirements to build PulseView:
exit 0
fi
-NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'`
# Boost (needed for PulseView)
cd boost_${VER_BOOST//./_}
patch -p1 < ../../boost.patch
./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system --without-icu
-echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"-I$PREFIX/include -I${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/include -I${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH}/include\" <linkflags>\"-L$PREFIX/lib -L${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH} -Wl,-rpath=${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH} -lgnustl_shared\" ;" > user-config.jam
+echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"-I$PREFIX/include $CPPFLAGS_STL\" <linkflags>\"-L$PREFIX/lib $LDFLAGS_STL -lgnustl_shared\" ;" > user-config.jam
./b2 -q -d+2 --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL
cd ..
make install
cd ..
+# Strip all shared libs to reduce size.
+find $PREFIX -iname "*.so" -exec ${TOOLCHAIN_TRIPLET}-strip -S {} \;
+
# PulseView
$GIT_CLONE git://sigrok.org/pulseview
cd pulseview
cmake $CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl .
make $PARALLEL VERBOSE=1
+make install
+${TOOLCHAIN_TRIPLET}-strip -S libs/$TARGET_ARCH/libpulseview.so
cd android
"${ANDROID_SDK}/tools/android" update project -p . -t android-14 -n PulseView
ant debug
projects / sigrok-util.git / blobdiff