[sigrok-util.git] / cross-compile / linux / sigrok-cross-linux

#!/bin/bash
##
## This file is part of the sigrok-util project.
##
## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

set -e

# Uncomment/set the following to match your cross-toolchain setup.
# TOOLCHAIN=...
# TOOLCHAIN_TRIPLET=...
# C="--host=$TOOLCHAIN_TRIPLET"
# export PATH=$TOOLCHAIN/bin:$PATH

# The path where the compiled packages will be installed.
PREFIX=$HOME/sr

# The path where to download files to and where to build packages.
BUILDDIR=./build

# The path where the libsigrok Python bindings will be installed.
PYPATH=$PREFIX/lib/python2.7/site-packages

# Edit this to enable/disable/modify parallel compiles.
PARALLEL="-j 2"

# You usually don't need to change anything below this line.

# -----------------------------------------------------------------------------

P="$PREFIX/lib/pkgconfig"
C="$C --prefix=$PREFIX"

# Remove build directory contents (if any) and create a new build dir.
rm -rf $BUILDDIR
mkdir $BUILDDIR
cd $BUILDDIR

GIT_CLONE="git clone --depth=1"

# -----------------------------------------------------------------------------

# libserialport
$GIT_CLONE git://sigrok.org/libserialport
cd libserialport
./autogen.sh
mkdir build
cd build
../configure $C
make $PARALLEL
make install
cd ../..

# libsigrok
mkdir -p $PYPATH
$GIT_CLONE git://sigrok.org/libsigrok
cd libsigrok
./autogen.sh
mkdir build
cd build
PKG_CONFIG_PATH=$P ../configure $C
make $PARALLEL
PYTHONPATH=$PYPATH make install
make check
cd ../..

# libsigrokdecode
$GIT_CLONE git://sigrok.org/libsigrokdecode
cd libsigrokdecode
./autogen.sh
mkdir build
cd build
PKG_CONFIG_PATH=$P ../configure $C
make $PARALLEL
make install
make check
cd ../..

# sigrok-firmware
$GIT_CLONE git://sigrok.org/sigrok-firmware
cd sigrok-firmware
./autogen.sh
mkdir build
cd build
# Nothing gets cross-compiled here, we just need 'make install' basically.
../configure $C
make install
cd ../..

# sigrok-firmware-fx2lafw
$GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw
cd sigrok-firmware-fx2lafw
./autogen.sh
mkdir build
cd build
# We're building the fx2lafw firmware on the host, no need to cross-compile.
../configure $C
make $PARALLEL
make install
cd ../..

# sigrok-cli
$GIT_CLONE git://sigrok.org/sigrok-cli
cd sigrok-cli
./autogen.sh
mkdir build
cd build
PKG_CONFIG_PATH=$P ../configure $C
make $PARALLEL
make install
cd ../..

# PulseView
$GIT_CLONE git://sigrok.org/pulseview
cd pulseview
mkdir build
cd build
PKG_CONFIG_PATH=$P cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y ..
make $PARALLEL
make install
cd ../..
Commit	Line	Data
	1	#!/bin/bash
	2	##
	3	## This file is part of the sigrok-util project.
	4	##
	5	## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
	6	##
	7	## This program is free software; you can redistribute it and/or modify
	8	## it under the terms of the GNU General Public License as published by
	9	## the Free Software Foundation; either version 2 of the License, or
	10	## (at your option) any later version.
	11	##
	12	## This program is distributed in the hope that it will be useful,
	13	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	## GNU General Public License for more details.
	16	##
	17	## You should have received a copy of the GNU General Public License
	18	## along with this program; if not, write to the Free Software
	19	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	20	##
	21
	22	set -e
	23
	24	# Uncomment/set the following to match your cross-toolchain setup.
	25	# TOOLCHAIN=...
	26	# TOOLCHAIN_TRIPLET=...
	27	# C="--host=$TOOLCHAIN_TRIPLET"
	28	# export PATH=$TOOLCHAIN/bin:$PATH
	29
	30	# The path where the compiled packages will be installed.
	31	PREFIX=$HOME/sr
	32
	33	# The path where to download files to and where to build packages.
	34	BUILDDIR=./build
	35
	36	# The path where the libsigrok Python bindings will be installed.
	37	PYPATH=$PREFIX/lib/python2.7/site-packages
	38
	39	# Edit this to enable/disable/modify parallel compiles.
	40	PARALLEL="-j 2"
	41
	42	# You usually don't need to change anything below this line.
	43
	44	# -----------------------------------------------------------------------------
	45
	46	P="$PREFIX/lib/pkgconfig"
	47	C="$C --prefix=$PREFIX"
	48
	49	# Remove build directory contents (if any) and create a new build dir.
	50	rm -rf $BUILDDIR
	51	mkdir $BUILDDIR
	52	cd $BUILDDIR
	53
	54	GIT_CLONE="git clone --depth=1"
	55
	56	# -----------------------------------------------------------------------------
	57
	58	# libserialport
	59	$GIT_CLONE git://sigrok.org/libserialport
	60	cd libserialport
	61	./autogen.sh
	62	mkdir build
	63	cd build
	64	../configure $C
	65	make $PARALLEL
	66	make install
	67	cd ../..
	68
	69	# libsigrok
	70	mkdir -p $PYPATH
	71	$GIT_CLONE git://sigrok.org/libsigrok
	72	cd libsigrok
	73	./autogen.sh
	74	mkdir build
	75	cd build
	76	PKG_CONFIG_PATH=$P ../configure $C
	77	make $PARALLEL
	78	PYTHONPATH=$PYPATH make install
	79	make check
	80	cd ../..
	81
	82	# libsigrokdecode
	83	$GIT_CLONE git://sigrok.org/libsigrokdecode
	84	cd libsigrokdecode
	85	./autogen.sh
	86	mkdir build
	87	cd build
	88	PKG_CONFIG_PATH=$P ../configure $C
	89	make $PARALLEL
	90	make install
	91	make check
	92	cd ../..
	93
	94	# sigrok-firmware
	95	$GIT_CLONE git://sigrok.org/sigrok-firmware
	96	cd sigrok-firmware
	97	./autogen.sh
	98	mkdir build
	99	cd build
	100	# Nothing gets cross-compiled here, we just need 'make install' basically.
	101	../configure $C
	102	make install
	103	cd ../..
	104
	105	# sigrok-firmware-fx2lafw
	106	$GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw
	107	cd sigrok-firmware-fx2lafw
	108	./autogen.sh
	109	mkdir build
	110	cd build
	111	# We're building the fx2lafw firmware on the host, no need to cross-compile.
	112	../configure $C
	113	make $PARALLEL
	114	make install
	115	cd ../..
	116
	117	# sigrok-cli
	118	$GIT_CLONE git://sigrok.org/sigrok-cli
	119	cd sigrok-cli
	120	./autogen.sh
	121	mkdir build
	122	cd build
	123	PKG_CONFIG_PATH=$P ../configure $C
	124	make $PARALLEL
	125	make install
	126	cd ../..
	127
	128	# PulseView
	129	$GIT_CLONE git://sigrok.org/pulseview
	130	cd pulseview
	131	mkdir build
	132	cd build
	133	PKG_CONFIG_PATH=$P cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y ..
	134	make $PARALLEL
	135	make install
	136	cd ../..
	137