]>
Commit | Line | Data |
---|---|---|
1 | #!/bin/sh | |
2 | ## | |
3 | ## This file is part of the sigrok-util project. | |
4 | ## | |
5 | ## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | ## | |
7 | ## This program is free software; you can redistribute it and/or modify | |
8 | ## it under the terms of the GNU General Public License as published by | |
9 | ## the Free Software Foundation; either version 2 of the License, or | |
10 | ## (at your option) any later version. | |
11 | ## | |
12 | ## This program is distributed in the hope that it will be useful, | |
13 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | ## GNU General Public License for more details. | |
16 | ## | |
17 | ## You should have received a copy of the GNU General Public License | |
18 | ## along with this program; if not, see <http://www.gnu.org/licenses/>. | |
19 | ## | |
20 | ||
21 | set -e | |
22 | ||
23 | # Uncomment/set the following to match your cross-toolchain setup. | |
24 | # TOOLCHAIN=... | |
25 | # TOOLCHAIN_TRIPLET=... | |
26 | # C="--host=$TOOLCHAIN_TRIPLET" | |
27 | # export PATH=$TOOLCHAIN/bin:$PATH | |
28 | ||
29 | # The path where the compiled packages will be installed. | |
30 | PREFIX=$HOME/sr | |
31 | ||
32 | # The path where to download files to and where to build packages. | |
33 | BUILDDIR=./build | |
34 | ||
35 | # The path where the libsigrok Python bindings will be installed. | |
36 | PYPATH=$PREFIX/lib/python2.7/site-packages | |
37 | ||
38 | # JDK include path. Usually found automatically, except on FreeBSD. | |
39 | if [ `uname` = "FreeBSD" ]; then | |
40 | JDK="--with-jni-include-path=/usr/local/openjdk7/include" | |
41 | fi | |
42 | ||
43 | # Edit this to control verbose build output. | |
44 | # V="V=1 VERBOSE=1" | |
45 | ||
46 | # Edit this to enable/disable/modify parallel compiles. | |
47 | PARALLEL="-j 2" | |
48 | ||
49 | # Edit this to enable/disable building certain components. | |
50 | BUILD_SIGROK_FIRMWARE_FX2LAFW=0 | |
51 | ||
52 | # Uncomment the following lines to build with clang and run scan-build. | |
53 | # export CC=clang | |
54 | # export CXX=clang++ | |
55 | # SB="scan-build -k -v" | |
56 | ||
57 | # You usually don't need to change anything below this line. | |
58 | ||
59 | # ----------------------------------------------------------------------------- | |
60 | ||
61 | P="$PREFIX/lib/pkgconfig" | |
62 | C="$C --prefix=$PREFIX" | |
63 | ||
64 | # Remove build directory contents (if any) and create a new build dir. | |
65 | rm -rf $BUILDDIR | |
66 | mkdir $BUILDDIR | |
67 | cd $BUILDDIR | |
68 | ||
69 | GIT_CLONE="git clone --depth=1" | |
70 | ||
71 | REPO_BASE="git://sigrok.org" | |
72 | ||
73 | # ----------------------------------------------------------------------------- | |
74 | ||
75 | # libserialport | |
76 | $GIT_CLONE $REPO_BASE/libserialport | |
77 | cd libserialport | |
78 | ./autogen.sh | |
79 | mkdir build | |
80 | cd build | |
81 | $SB ../configure $C | |
82 | $SB make $PARALLEL $V | |
83 | make install $V | |
84 | cd ../.. | |
85 | ||
86 | # libsigrok | |
87 | mkdir -p $PYPATH | |
88 | $GIT_CLONE $REPO_BASE/libsigrok | |
89 | cd libsigrok | |
90 | ./autogen.sh | |
91 | mkdir build | |
92 | cd build | |
93 | PKG_CONFIG_PATH=$P $SB ../configure $C $JDK | |
94 | $SB make $PARALLEL $V | |
95 | PYTHONPATH=$PYPATH $SB make install $V | |
96 | $SB make check $V | |
97 | cd ../.. | |
98 | ||
99 | # libsigrokdecode | |
100 | $GIT_CLONE $REPO_BASE/libsigrokdecode | |
101 | cd libsigrokdecode | |
102 | ./autogen.sh | |
103 | mkdir build | |
104 | cd build | |
105 | PKG_CONFIG_PATH=$P $SB ../configure $C | |
106 | $SB make $PARALLEL $V | |
107 | make install $V | |
108 | $SB make check $V | |
109 | cd ../.. | |
110 | ||
111 | # sigrok-firmware | |
112 | $GIT_CLONE $REPO_BASE/sigrok-firmware | |
113 | cd sigrok-firmware | |
114 | ./autogen.sh | |
115 | mkdir build | |
116 | cd build | |
117 | # Nothing gets cross-compiled here, we just need 'make install' basically. | |
118 | $SB ../configure $C | |
119 | make install $V | |
120 | cd ../.. | |
121 | ||
122 | if [ $BUILD_SIGROK_FIRMWARE_FX2LAFW = 1 ]; then | |
123 | # sigrok-firmware-fx2lafw | |
124 | $GIT_CLONE $REPO_BASE/sigrok-firmware-fx2lafw | |
125 | cd sigrok-firmware-fx2lafw | |
126 | ./autogen.sh | |
127 | mkdir build | |
128 | cd build | |
129 | # We're building the fx2lafw firmware on the host, no need to cross-compile. | |
130 | $SB ../configure $C | |
131 | make $PARALLEL $V | |
132 | make install $V | |
133 | cd ../.. | |
134 | fi | |
135 | ||
136 | # sigrok-cli | |
137 | $GIT_CLONE $REPO_BASE/sigrok-cli | |
138 | cd sigrok-cli | |
139 | ./autogen.sh | |
140 | mkdir build | |
141 | cd build | |
142 | if [ `uname` = "FreeBSD" ]; then | |
143 | # Temporary fix for: http://sigrok.org/bugzilla/show_bug.cgi?id=552 | |
144 | PKG_CONFIG_PATH=$P $SB ../configure $C LDFLAGS=-lusb | |
145 | else | |
146 | PKG_CONFIG_PATH=$P $SB ../configure $C | |
147 | fi | |
148 | $SB make $PARALLEL $V | |
149 | make install $V | |
150 | cd ../.. | |
151 | ||
152 | # PulseView | |
153 | $GIT_CLONE $REPO_BASE/pulseview | |
154 | cd pulseview | |
155 | mkdir build | |
156 | cd build | |
157 | PKG_CONFIG_PATH=$P $SB cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y -DCMAKE_EXPORT_COMPILE_COMMANDS=y .. | |
158 | $SB make $PARALLEL $V | |
159 | make install $V | |
160 | $SB make test $V | |
161 | cd ../.. |