]>
Commit | Line | Data |
---|---|---|
1 | #!/bin/bash | |
2 | ## | |
3 | ## This file is part of the sigrok-util project. | |
4 | ## | |
5 | ## Copyright (C) 2013-2015 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | ## Copyright (C) 2013-2015 Marcus Comstedt <marcus@mc.pp.se> | |
7 | ## | |
8 | ## This program is free software; you can redistribute it and/or modify | |
9 | ## it under the terms of the GNU General Public License as published by | |
10 | ## the Free Software Foundation; either version 2 of the License, or | |
11 | ## (at your option) any later version. | |
12 | ## | |
13 | ## This program is distributed in the hope that it will be useful, | |
14 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | ## GNU General Public License for more details. | |
17 | ## | |
18 | ## You should have received a copy of the GNU General Public License | |
19 | ## along with this program; if not, write to the Free Software | |
20 | ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
21 | ## | |
22 | ||
23 | set -e | |
24 | ||
25 | # The path where the NDK, SDK, and toolchains are located. | |
26 | ANDROID_PATH=$HOME/android | |
27 | ||
28 | # The path where the Android NDK is located. | |
29 | ANDROID_NDK=$ANDROID_PATH/android-ndk-r10d | |
30 | ||
31 | # The path where the Android SDK is located. | |
32 | ANDROID_SDK=$ANDROID_PATH/android-sdk-linux | |
33 | ||
34 | # The path where your Android toolchain directory is located. | |
35 | TOOLCHAIN=$ANDROID_PATH/android-arm-toolchain | |
36 | # TOOLCHAIN=$ANDROID_PATH/android-mipsel-toolchain | |
37 | # TOOLCHAIN=$ANDROID_PATH/android-i686-toolchain | |
38 | # TOOLCHAIN=$ANDROID_NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86 | |
39 | # TOOLCHAIN=$ANDROID_NDK/toolchains/x86-4.9/prebuilt/linux-x86 | |
40 | # TOOLCHAIN=$ANDROID_NDK/toolchains/mipsel-linux-android-4.9/prebuilt/linux-x86 | |
41 | ||
42 | # Select which Android toolchain to use. | |
43 | # Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET! | |
44 | TOOLCHAIN_TRIPLET=arm-linux-androideabi | |
45 | # TOOLCHAIN_TRIPLET=mipsel-linux-android | |
46 | # TOOLCHAIN_TRIPLET=i686-linux-android | |
47 | ||
48 | # The path where the cross-compiled packages will be installed. | |
49 | PREFIX=$HOME/sr_android | |
50 | ||
51 | # The path where to download files to and where to build packages. | |
52 | BUILDDIR=./build | |
53 | ||
54 | # Edit this to control verbose build output. | |
55 | # V="V=1 VERBOSE=1" | |
56 | ||
57 | # Edit this to enable/disable/modify parallel compiles. | |
58 | PARALLEL="-j 2" | |
59 | ||
60 | # You usually don't need to change anything below this line. | |
61 | ||
62 | # ----------------------------------------------------------------------------- | |
63 | ||
64 | VER_LIBICONV=1.14 | |
65 | VER_GETTEXT=0.19.4 | |
66 | VER_ZLIB=1.2.8 | |
67 | VER_PCRE=8.36 | |
68 | VER_LIBFFI=3.2.1 | |
69 | VER_GLIB=2.43.3 | |
70 | VER_GLIB_SHORT=2.43 | |
71 | VER_LIBSIGCXX=2.4.0 | |
72 | VER_LIBSIGCXX_SHORT=2.4 | |
73 | VER_LIBZIP=0.11.2 | |
74 | VER_LIBFTDI1=1.2 | |
75 | VER_LIBUSB=1.0.19 | |
76 | VER_PYTHON=3.3.3 | |
77 | VER_BOOST=1.57.0 | |
78 | VER_QT=5.4.1 | |
79 | VER_NDK=10d | |
80 | VER_SDK=23.0.2 | |
81 | VER_AND_BT=22.0.1 # android build tools version | |
82 | VER_AND_API=16 # target android API version | |
83 | ||
84 | SF_MIRROR=download.sourceforge.net | |
85 | ||
86 | WGET="wget --quiet" | |
87 | GIT_CLONE="git clone --depth=1" | |
88 | ||
89 | case "$TOOLCHAIN_TRIPLET" in | |
90 | arm*) TARGET_ARCH=armeabi;; | |
91 | mips*) TARGET_ARCH=mips;; | |
92 | i686*) TARGET_ARCH=x86;; | |
93 | *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET."; exit 1;; | |
94 | esac | |
95 | ||
96 | # ----------------------------------------------------------------------------- | |
97 | ||
98 | # Get the Android NDK and SDK, install required packages and toolchains. | |
99 | if [ "x$1" = "xprepare" ]; then | |
100 | mkdir -p $ANDROID_PATH | |
101 | cd $ANDROID_PATH | |
102 | ||
103 | # NDK | |
104 | $WGET http://dl.google.com/android/ndk/android-ndk-r$VER_NDK-linux-x86.bin | |
105 | chmod 700 android-ndk-r$VER_NDK-linux-x86.bin | |
106 | ./android-ndk-r$VER_NDK-linux-x86.bin | |
107 | cd android-ndk-r$VER_NDK | |
108 | ./build/tools/make-standalone-toolchain.sh --platform=android-16 \ | |
109 | --toolchain=arm-linux-androideabi-4.9 \ | |
110 | --install-dir=$ANDROID_PATH/android-arm-toolchain | |
111 | cd .. | |
112 | ||
113 | # SDK | |
114 | $WGET http://dl.google.com/android/android-sdk_r$VER_SDK-linux.tgz | |
115 | tar xfz android-sdk_r$VER_SDK-linux.tgz | |
116 | cd android-sdk-linux | |
117 | ./tools/android update sdk --no-ui --filter platform-tools,build-tools-$VER_AND_BT,android-$VER_AND_API | |
118 | cd .. | |
119 | ||
120 | exit | |
121 | fi | |
122 | ||
123 | # ----------------------------------------------------------------------------- | |
124 | ||
125 | # Remove build directory contents (if any) and create a new build dir. | |
126 | rm -rf $BUILDDIR | |
127 | mkdir $BUILDDIR | |
128 | cd $BUILDDIR | |
129 | ||
130 | # ----------------------------------------------------------------------------- | |
131 | ||
132 | # Build host Python before we start messing with the environment. | |
133 | # Don't do parallel builds, this doesn't seem to work well. | |
134 | $WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz | |
135 | tar xfJ Python-$VER_PYTHON.tar.xz | |
136 | cd Python-$VER_PYTHON | |
137 | ./configure | |
138 | make python $V | |
139 | mv python hostpython | |
140 | cd .. | |
141 | ||
142 | # ----------------------------------------------------------------------------- | |
143 | ||
144 | # We need to find tools in the toolchain. | |
145 | export PATH=$TOOLCHAIN/bin:$PATH | |
146 | ||
147 | # Tell pkg-config to only look for our cross-built stuff. | |
148 | export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig" | |
149 | export -n PKG_CONFIG_PATH | |
150 | ||
151 | # Check toolchain | |
152 | if test -d "$TOOLCHAIN"/sysroot; then | |
153 | echo "Toolchain is standalone" | |
154 | STANDALONE_TOOLCHAIN=$TOOLCHAIN | |
155 | SYSROOT= | |
156 | else | |
157 | STANDALONE_TOOLCHAIN= | |
158 | NATIVE_API_LEVEL=$VER_AND_API | |
159 | SYSROOT_DIR=${ANDROID_NDK}/platforms/android-${NATIVE_API_LEVEL}/arch-${TARGET_ARCH%eabi*} | |
160 | if [ ! -d "$SYSROOT_DIR" ]; then | |
161 | echo >&2 "Can't build with NDK toolchain; sysroot $SYSROOT_DIR is missing" | |
162 | exit 1 | |
163 | fi | |
164 | SYSROOT="--sysroot $SYSROOT_DIR" | |
165 | CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT" | |
166 | CXX="$TOOLCHAIN_TRIPLET-g++ $SYSROOT" | |
167 | export CC CXX | |
168 | fi | |
169 | NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'` | |
170 | ||
171 | # Define some helper variables. | |
172 | C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX" | |
173 | CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX}" | |
174 | if [ -n "$STANDALONE_TOOLCHAIN" ]; then | |
175 | CM="$CM -DANDROID_STANDALONE_TOOLCHAIN=${STANDALONE_TOOLCHAIN}" | |
176 | if [ -d "${ANDROID_NDK}/sources/cxx-stl" ]; then | |
177 | CM="$CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl" | |
178 | fi | |
179 | else | |
180 | CM="$CM -DANDROID_NDK=${ANDROID_NDK}" | |
181 | CM="$CM -DANDROID_NATIVE_API_LEVEL=${NATIVE_API_LEVEL}" | |
182 | CM="$CM -DANDROID_TOOLCHAIN_NAME=${TOOLCHAIN_TRIPLET}-${NDK_TOOLCHAIN_VERSION}" | |
183 | fi | |
184 | ||
185 | # Look for STL, needed to build bindings | |
186 | STL_BASE="${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}" | |
187 | if [ -d ${STL_BASE}/include ]; then | |
188 | CPPFLAGS_STL="-I${STL_BASE}/include -I${STL_BASE}/libs/${TARGET_ARCH}/include" | |
189 | LDFLAGS_STL="-L${STL_BASE}/libs/${TARGET_ARCH} -Wl,-rpath=${STL_BASE}/libs/${TARGET_ARCH}" | |
190 | BINDINGS_CONFIG="--enable-bindings" | |
191 | else | |
192 | echo "Warning: STL unavailable, libsigrok bindings will not be built." | |
193 | CPPFLAGS_STL= | |
194 | LDFLAGS_STL= | |
195 | BINDINGS_CONFIG="--disable-bindings" | |
196 | fi | |
197 | ||
198 | # ----------------------------------------------------------------------------- | |
199 | ||
200 | # Get the latest versions of config.guess/config.sub that know about Android. | |
201 | $GIT_CLONE git://git.savannah.gnu.org/config.git | |
202 | ||
203 | # Get a toolchain for cmake that knows about Android. | |
204 | $WGET https://android-cmake.googlecode.com/hg/toolchain/android.toolchain.cmake | |
205 | patch < ../android.toolchain.cmake.patch android.toolchain.cmake | |
206 | ||
207 | # ----------------------------------------------------------------------------- | |
208 | ||
209 | # Python (needed for libsigrokdecode) | |
210 | # Don't do parallel Python builds, this doesn't seem to work well. | |
211 | cd Python-$VER_PYTHON | |
212 | make distclean $V | |
213 | autoreconf | |
214 | patch -p1 < ../../Python-$VER_PYTHON.patch | |
215 | ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6 | |
216 | sed -i "s/^#zlib/zlib/g" Modules/Setup | |
217 | make PYTHON_FOR_BUILD='_PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) ./hostpython' install $V | |
218 | cd .. | |
219 | ||
220 | # libiconv (needed for glib) | |
221 | $WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz | |
222 | tar xfz libiconv-$VER_LIBICONV.tar.gz | |
223 | cd libiconv-$VER_LIBICONV | |
224 | cp -f ../config/config.guess build-aux | |
225 | cp -f ../config/config.sub build-aux | |
226 | cp -f ../config/config.guess libcharset/build-aux | |
227 | cp -f ../config/config.sub libcharset/build-aux | |
228 | ./configure $C --enable-shared | |
229 | make lib/localcharset.h $V | |
230 | cd libcharset | |
231 | make $PARALLEL $V | |
232 | make install $V | |
233 | cd ../lib | |
234 | make $PARALLEL $V | |
235 | make install $V | |
236 | cd .. | |
237 | test -d $PREFIX/include || mkdir $PREFIX/include | |
238 | cp include/iconv.h.inst $PREFIX/include/iconv.h | |
239 | cd .. | |
240 | ||
241 | # gettext (needed for glib) | |
242 | $WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz | |
243 | tar xfz gettext-$VER_GETTEXT.tar.gz | |
244 | cd gettext-$VER_GETTEXT | |
245 | ./configure $C --enable-shared --disable-libasprintf | |
246 | cd gettext-runtime | |
247 | make $PARALLEL $V | |
248 | make install $V | |
249 | cd ../.. | |
250 | ||
251 | # zlib (needed for glib and libzip) | |
252 | $WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz | |
253 | tar xfz zlib-$VER_ZLIB.tar.gz | |
254 | cd zlib-$VER_ZLIB | |
255 | # Note: zlib's configure doesn't understand --host, we need to pass $CC. | |
256 | CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT" ./configure --prefix=$PREFIX | |
257 | make $PARALLEL $V | |
258 | make install $V | |
259 | cd .. | |
260 | ||
261 | # pcre (needed for glib) | |
262 | $WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz | |
263 | tar xfz pcre-$VER_PCRE.tar.gz | |
264 | cd pcre-$VER_PCRE | |
265 | ./configure $C --disable-cpp | |
266 | make $PARALLEL $V | |
267 | make install $V | |
268 | cd .. | |
269 | ||
270 | # libffi (needed for glib) | |
271 | $WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz | |
272 | tar xfz libffi-$VER_LIBFFI.tar.gz | |
273 | cd libffi-$VER_LIBFFI | |
274 | ./configure $C | |
275 | make $PARALLEL $V | |
276 | make install $V | |
277 | cd .. | |
278 | ||
279 | # glib (needed for libsigrok) | |
280 | $WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz | |
281 | tar xfJ glib-$VER_GLIB.tar.xz | |
282 | cd glib-$VER_GLIB | |
283 | NOCONFIGURE=yes ./autogen.sh | |
284 | # Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config. | |
285 | LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C | |
286 | make $PARALLEL $V | |
287 | make install $V | |
288 | cd .. | |
289 | ||
290 | # libzip (needed for libsigrok) | |
291 | $WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz | |
292 | tar xfz libzip-$VER_LIBZIP.tar.gz | |
293 | cd libzip-$VER_LIBZIP | |
294 | cp -f ../config/config.guess . | |
295 | cp -f ../config/config.sub . | |
296 | ./configure $C | |
297 | make $PARALLEL $V | |
298 | make install $V | |
299 | cd .. | |
300 | ||
301 | # libusb-1.0 (needed for libsigrok) | |
302 | $WGET http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB/libusb-$VER_LIBUSB.tar.bz2 | |
303 | tar xfj libusb-$VER_LIBUSB.tar.bz2 | |
304 | cd libusb-$VER_LIBUSB | |
305 | patch -p1 < ../../libusb-1.0.patch | |
306 | ./configure $C --disable-udev | |
307 | make $PARALLEL $V | |
308 | make install $V | |
309 | cd .. | |
310 | ||
311 | # libftdi1 (needed for libsigrok) | |
312 | $WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2 | |
313 | tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2 | |
314 | cd libftdi1-$VER_LIBFTDI1 | |
315 | cmake $CM -DFTDIPP=no -DDOCUMENTATION=no -DEXAMPLES=no -DFTDI_EEPROM=no -DPYTHON_BINDINGS=no . | |
316 | make $PARALLEL $V | |
317 | make install $V | |
318 | cd .. | |
319 | ||
320 | # libserialport | |
321 | $GIT_CLONE git://sigrok.org/libserialport | |
322 | cd libserialport | |
323 | ./autogen.sh | |
324 | mkdir build | |
325 | cd build | |
326 | ../configure $C | |
327 | make $PARALLEL $V | |
328 | make install $V | |
329 | cd ../.. | |
330 | ||
331 | # Build dependencies for libsigrok bindings if needed | |
332 | ||
333 | if [ x"$CPPFLAGS_STL" != x ]; then | |
334 | ||
335 | # libsigc++ (needed for glibmm) | |
336 | $WGET http://ftp.gnome.org/pub/gnome/sources/libsigc++/$VER_LIBSIGCXX_SHORT/libsigc++-$VER_LIBSIGCXX.tar.xz | |
337 | tar xfJ libsigc++-$VER_LIBSIGCXX.tar.xz | |
338 | cd libsigc++-$VER_LIBSIGCXX | |
339 | cp -f ../config/config.guess build | |
340 | cp -f ../config/config.sub build | |
341 | CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C | |
342 | make $PARALLEL $V | |
343 | make install $V | |
344 | cd .. | |
345 | ||
346 | # glibmm (needed for libsigrok bindings) | |
347 | $WGET http://ftp.gnome.org/pub/gnome/sources/glibmm/$VER_GLIB_SHORT/glibmm-$VER_GLIB.tar.xz | |
348 | tar xfJ glibmm-$VER_GLIB.tar.xz | |
349 | cd glibmm-$VER_GLIB | |
350 | CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C | |
351 | make $PARALLEL $V | |
352 | make install $V | |
353 | cd .. | |
354 | ||
355 | fi | |
356 | ||
357 | # libsigrok | |
358 | $GIT_CLONE git://sigrok.org/libsigrok | |
359 | cd libsigrok | |
360 | ./autogen.sh | |
361 | mkdir build | |
362 | cd build | |
363 | CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL" ../configure $C $BINDINGS_CONFIG --datadir=/sdcard | |
364 | make $PARALLEL $V | |
365 | make datadir='$(datarootdir)' install $V | |
366 | cd ../.. | |
367 | ||
368 | # libsigrokdecode | |
369 | $GIT_CLONE git://sigrok.org/libsigrokdecode | |
370 | cd libsigrokdecode | |
371 | ./autogen.sh | |
372 | mkdir build | |
373 | cd build | |
374 | ../configure $C | |
375 | make $PARALLEL $V | |
376 | make install $V | |
377 | cd ../.. | |
378 | ||
379 | # sigrok-cli | |
380 | $GIT_CLONE git://sigrok.org/sigrok-cli | |
381 | cd sigrok-cli | |
382 | ./autogen.sh | |
383 | mkdir build | |
384 | cd build | |
385 | ../configure $C | |
386 | make $PARALLEL $V | |
387 | make install $V | |
388 | cd ../.. | |
389 | ||
390 | # Check if we have all requirements to build PulseView: | |
391 | ||
392 | if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then | |
393 | echo "Android NDK not available, not building PulseView." | |
394 | exit 0 | |
395 | fi | |
396 | ||
397 | if [ -z "$ANDROID_SDK" -o ! -d "$ANDROID_SDK"/platforms/android-$VER_AND_API ]; then | |
398 | echo "Android SDK with platform $VER_AND_API not available, not building PulseView." | |
399 | exit 0 | |
400 | fi | |
401 | ||
402 | if [ ! -e "${ANDROID_SDK}/tools/android" ]; then | |
403 | echo "Essential Android build tools not available, not building PulseView." | |
404 | exit 0 | |
405 | fi | |
406 | ||
407 | NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'` | |
408 | ||
409 | # Boost (needed for PulseView) | |
410 | $WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2 | |
411 | tar xfj boost_${VER_BOOST//./_}.tar.bz2 | |
412 | cd boost_${VER_BOOST//./_} | |
413 | CC= ./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system,thread,test --without-icu | |
414 | echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"$SYSROOT -I$PREFIX/include $CPPFLAGS_STL\" <linkflags>\"$SYSROOT -L$PREFIX/lib $LDFLAGS_STL -lgnustl_shared\" ;" > user-config.jam | |
415 | ./b2 -q -d+2 --ignore-site-config --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL | |
416 | cd .. | |
417 | ||
418 | # Qt (needed for PulseView) | |
419 | $WGET http://download.qt-project.org/official_releases/qt/${VER_QT%.*}/${VER_QT}/single/qt-everywhere-opensource-src-${VER_QT}.tar.gz | |
420 | tar xfz qt-everywhere-opensource-src-${VER_QT}.tar.gz | |
421 | cd qt-everywhere-opensource-src-${VER_QT} | |
422 | patch -p1 < ../../android-qt.patch | |
423 | CC= CXX= ./configure \ | |
424 | --prefix="$PREFIX" \ | |
425 | -developer-build \ | |
426 | -xplatform android-g++ \ | |
427 | -nomake tests \ | |
428 | -nomake examples \ | |
429 | -android-sdk "$ANDROID_SDK" \ | |
430 | -android-ndk "$ANDROID_NDK" \ | |
431 | -android-ndk-host "$NDK_HOST" \ | |
432 | -android-arch "$TARGET_ARCH" \ | |
433 | -android-toolchain-version "$NDK_TOOLCHAIN_VERSION" \ | |
434 | -skip qttranslations \ | |
435 | -skip qtwebkit \ | |
436 | -skip qtserialport \ | |
437 | -skip qtwebkit-examples \ | |
438 | -skip qtlocation \ | |
439 | -skip qtconnectivity \ | |
440 | -opensource -confirm-license -silent | |
441 | export ANDROID_API_VERSION=android-$VER_AND_API | |
442 | export ANDROID_BUILD_TOOLS_REVISION=$VER_AND_BT | |
443 | make module-qtbase module-qtandroidextras module-qtsvg module-qtimageformats $PARALLEL $V | |
444 | make install $V | |
445 | cd .. | |
446 | ||
447 | # sigrok-androidutils | |
448 | $GIT_CLONE git://sigrok.org/sigrok-androidutils | |
449 | cd sigrok-androidutils | |
450 | ./autogen.sh | |
451 | ./configure $C --with-android-sdk="${ANDROID_SDK}" --with-android-platform=android-$VER_AND_API | |
452 | make $PARALLEL $V | |
453 | make install $V | |
454 | cd .. | |
455 | ||
456 | # Strip all shared libs to reduce size. | |
457 | find $PREFIX -iname "*.so" -exec ${TOOLCHAIN_TRIPLET}-strip -S {} \; | |
458 | ||
459 | # PulseView | |
460 | $GIT_CLONE git://sigrok.org/pulseview | |
461 | cd pulseview | |
462 | cmake $CM -DENABLE_TESTS=y . | |
463 | make $PARALLEL $V | |
464 | make install $V | |
465 | ${TOOLCHAIN_TRIPLET}-strip -S libs/$TARGET_ARCH/libpulseview.so | |
466 | cd android | |
467 | "${ANDROID_SDK}/tools/android" update project -p . -t android-$VER_AND_API -n PulseView | |
468 | ant debug | |
469 | cd ../.. |