]>
Commit | Line | Data |
---|---|---|
1 | #!/bin/bash | |
2 | ## | |
3 | ## This file is part of the sigrok-util project. | |
4 | ## | |
5 | ## Copyright (C) 2013-2014 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | ## | |
7 | ## This program is free software; you can redistribute it and/or modify | |
8 | ## it under the terms of the GNU General Public License as published by | |
9 | ## the Free Software Foundation; either version 2 of the License, or | |
10 | ## (at your option) any later version. | |
11 | ## | |
12 | ## This program is distributed in the hope that it will be useful, | |
13 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | ## GNU General Public License for more details. | |
16 | ## | |
17 | ## You should have received a copy of the GNU General Public License | |
18 | ## along with this program; if not, write to the Free Software | |
19 | ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
20 | ## | |
21 | ||
22 | set -e | |
23 | ||
24 | # The path where the Android NDK is located. | |
25 | ANDROID_NDK=$HOME/android/android-ndk-r10c | |
26 | ||
27 | # The path where the Android SDK is located. | |
28 | ANDROID_SDK=$HOME/android/android-sdk-linux | |
29 | ||
30 | # The path where your Android toolchain directory is located. | |
31 | TOOLCHAIN=$HOME/android/android-arm-toolchain | |
32 | # TOOLCHAIN=$HOME/android/android-mipsel-toolchain | |
33 | # TOOLCHAIN=$HOME/android/android-i686-toolchain | |
34 | ||
35 | # Select which Android toolchain to use. | |
36 | # Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET! | |
37 | TOOLCHAIN_TRIPLET=arm-linux-androideabi | |
38 | # TOOLCHAIN_TRIPLET=mipsel-linux-android | |
39 | # TOOLCHAIN_TRIPLET=i686-linux-android | |
40 | ||
41 | # The path where the cross-compiled packages will be installed. | |
42 | PREFIX=$HOME/sr_android | |
43 | ||
44 | # The path where to download files to and where to build packages. | |
45 | BUILDDIR=./build | |
46 | ||
47 | # Edit this to enable/disable/modify parallel compiles. | |
48 | PARALLEL="-j 2" | |
49 | ||
50 | # You usually don't need to change anything below this line. | |
51 | ||
52 | # ----------------------------------------------------------------------------- | |
53 | ||
54 | VER_LIBICONV=1.14 | |
55 | VER_GETTEXT=0.19.2 | |
56 | VER_ZLIB=1.2.8 | |
57 | VER_PCRE=8.35 | |
58 | VER_LIBFFI=3.1 | |
59 | VER_GLIB=2.41.3 | |
60 | VER_GLIB_SHORT=2.41 | |
61 | VER_LIBSIGCXX=2.3.2 | |
62 | VER_LIBSIGCXX_SHORT=2.3 | |
63 | VER_LIBZIP=0.11.2 | |
64 | VER_LIBFTDI1=1.1 | |
65 | VER_LIBUSB=1.0.19 | |
66 | VER_PYTHON=3.3.3 | |
67 | VER_BOOST=1.55.0 | |
68 | VER_QT=5.3.1 | |
69 | ||
70 | SF_MIRROR=switch.dl.sourceforge.net | |
71 | ||
72 | WGET="wget --quiet" | |
73 | GIT_CLONE="git clone --depth=1" | |
74 | ||
75 | case "$TOOLCHAIN_TRIPLET" in | |
76 | arm*) TARGET_ARCH=armeabi;; | |
77 | mips*) TARGET_ARCH=mips;; | |
78 | i686*) TARGET_ARCH=x86;; | |
79 | *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET."; exit 1;; | |
80 | esac | |
81 | ||
82 | # ----------------------------------------------------------------------------- | |
83 | ||
84 | # Remove build directory contents (if any) and create a new build dir. | |
85 | rm -rf $BUILDDIR | |
86 | mkdir $BUILDDIR | |
87 | cd $BUILDDIR | |
88 | ||
89 | # ----------------------------------------------------------------------------- | |
90 | ||
91 | # Build host Python before we start messing with the environment. | |
92 | # Don't do parallel builds, this doesn't seem to work well. | |
93 | $WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz | |
94 | tar xfJ Python-$VER_PYTHON.tar.xz | |
95 | cd Python-$VER_PYTHON | |
96 | ./configure | |
97 | make python | |
98 | mv python hostpython | |
99 | cd .. | |
100 | ||
101 | # ----------------------------------------------------------------------------- | |
102 | ||
103 | # We need to find tools in the toolchain. | |
104 | export PATH=$TOOLCHAIN/bin:$PATH | |
105 | ||
106 | # Tell pkg-config to only look for our cross-built stuff. | |
107 | export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig" | |
108 | export -n PKG_CONFIG_PATH | |
109 | ||
110 | # Define some helper variables. | |
111 | C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX" | |
112 | CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX} -DANDROID_STANDALONE_TOOLCHAIN=${TOOLCHAIN}" | |
113 | ||
114 | # Look for STL, needed to build bindings | |
115 | NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'` | |
116 | STL_BASE="${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}" | |
117 | if [ -d ${STL_BASE}/include ]; then | |
118 | CPPFLAGS_STL="-I${STL_BASE}/include -I${STL_BASE}/libs/${TARGET_ARCH}/include" | |
119 | LDFLAGS_STL="-L${STL_BASE}/libs/${TARGET_ARCH} -Wl,-rpath=${STL_BASE}/libs/${TARGET_ARCH}" | |
120 | BINDINGS_CONFIG="--enable-bindings" | |
121 | else | |
122 | echo "Warning: STL unavailable, libsigrok bindings will not be built." | |
123 | CPPFLAGS_STL= | |
124 | LDFLAGS_STL= | |
125 | BINDINGS_CONFIG="--disable-bindings" | |
126 | fi | |
127 | ||
128 | # ----------------------------------------------------------------------------- | |
129 | ||
130 | # Get the latest versions of config.guess/config.sub that know about Android. | |
131 | $GIT_CLONE git://git.savannah.gnu.org/config.git | |
132 | ||
133 | # Get a toolchain for cmake that knows about Android. | |
134 | $WGET https://android-cmake.googlecode.com/hg/toolchain/android.toolchain.cmake | |
135 | patch < ../android.toolchain.cmake.patch android.toolchain.cmake | |
136 | ||
137 | # ----------------------------------------------------------------------------- | |
138 | ||
139 | # Python (needed for libsigrokdecode) | |
140 | # Don't do parallel Python builds, this doesn't seem to work well. | |
141 | cd Python-$VER_PYTHON | |
142 | make distclean | |
143 | autoreconf | |
144 | patch -p1 < ../../Python-$VER_PYTHON.patch | |
145 | ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6 | |
146 | sed -i "s/^#zlib/zlib/g" Modules/Setup | |
147 | make PYTHON_FOR_BUILD=./hostpython install | |
148 | cd .. | |
149 | ||
150 | # libiconv (needed for glib) | |
151 | $WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz | |
152 | tar xfz libiconv-$VER_LIBICONV.tar.gz | |
153 | cd libiconv-$VER_LIBICONV | |
154 | cp -f ../config/config.guess build-aux | |
155 | cp -f ../config/config.sub build-aux | |
156 | cp -f ../config/config.guess libcharset/build-aux | |
157 | cp -f ../config/config.sub libcharset/build-aux | |
158 | ./configure $C --enable-shared | |
159 | make lib/localcharset.h | |
160 | cd libcharset | |
161 | make $PARALLEL | |
162 | make install | |
163 | cd ../lib | |
164 | make $PARALLEL | |
165 | make install | |
166 | cd .. | |
167 | test -d $PREFIX/include || mkdir $PREFIX/include | |
168 | cp include/iconv.h.inst $PREFIX/include/iconv.h | |
169 | cd .. | |
170 | ||
171 | # gettext (needed for glib) | |
172 | $WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz | |
173 | tar xfz gettext-$VER_GETTEXT.tar.gz | |
174 | cd gettext-$VER_GETTEXT | |
175 | ./configure $C --enable-shared --disable-libasprintf | |
176 | cd gettext-runtime | |
177 | make $PARALLEL | |
178 | make install | |
179 | cd ../.. | |
180 | ||
181 | # zlib (needed for glib and libzip) | |
182 | $WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz | |
183 | tar xfz zlib-$VER_ZLIB.tar.gz | |
184 | cd zlib-$VER_ZLIB | |
185 | # Note: zlib's configure doesn't understand --host, we need to pass $CC. | |
186 | CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX | |
187 | make $PARALLEL | |
188 | make install | |
189 | cd .. | |
190 | ||
191 | # pcre (needed for glib) | |
192 | $WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz | |
193 | tar xfz pcre-$VER_PCRE.tar.gz | |
194 | cd pcre-$VER_PCRE | |
195 | ./configure $C --disable-cpp | |
196 | make $PARALLEL | |
197 | make install | |
198 | cd .. | |
199 | ||
200 | # libffi (needed for glib) | |
201 | $WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz | |
202 | tar xfz libffi-$VER_LIBFFI.tar.gz | |
203 | cd libffi-$VER_LIBFFI | |
204 | ./configure $C | |
205 | make $PARALLEL | |
206 | make install | |
207 | cd .. | |
208 | ||
209 | # glib (needed for libsigrok) | |
210 | $WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz | |
211 | tar xfJ glib-$VER_GLIB.tar.xz | |
212 | cd glib-$VER_GLIB | |
213 | ./autogen.sh | |
214 | # Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config. | |
215 | LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C | |
216 | make $PARALLEL | |
217 | make install | |
218 | cd .. | |
219 | ||
220 | # libzip (needed for libsigrok) | |
221 | $WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz | |
222 | tar xfz libzip-$VER_LIBZIP.tar.gz | |
223 | cd libzip-$VER_LIBZIP | |
224 | cp -f ../config/config.guess . | |
225 | cp -f ../config/config.sub . | |
226 | ./configure $C | |
227 | make $PARALLEL | |
228 | make install | |
229 | cd .. | |
230 | ||
231 | # libusb-1.0 (needed for libsigrok) | |
232 | $WGET http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB/libusb-$VER_LIBUSB.tar.bz2 | |
233 | tar xfj libusb-$VER_LIBUSB.tar.bz2 | |
234 | cd libusb-$VER_LIBUSB | |
235 | patch -p1 < ../../libusb-1.0.patch | |
236 | ./configure $C --disable-udev | |
237 | make $PARALLEL | |
238 | make install | |
239 | cd .. | |
240 | ||
241 | # libftdi1 (needed for libsigrok) | |
242 | $WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2 | |
243 | tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2 | |
244 | cd libftdi1-$VER_LIBFTDI1 | |
245 | cmake $CM -DFTDIPP=OFF . | |
246 | make $PARALLEL | |
247 | make install | |
248 | cd .. | |
249 | ||
250 | # libserialport | |
251 | $GIT_CLONE git://sigrok.org/libserialport | |
252 | cd libserialport | |
253 | ./autogen.sh | |
254 | mkdir build | |
255 | cd build | |
256 | ../configure $C | |
257 | make $PARALLEL V=1 | |
258 | make install | |
259 | cd ../.. | |
260 | ||
261 | # Build dependencies for libsigrok bindings if needed | |
262 | ||
263 | if [ x"$CPPFLAGS_STL" != x ]; then | |
264 | ||
265 | # libsigc++ (needed for glibmm) | |
266 | $WGET http://ftp.gnome.org/pub/gnome/sources/libsigc++/$VER_LIBSIGCXX_SHORT/libsigc++-$VER_LIBSIGCXX.tar.xz | |
267 | tar xfJ libsigc++-$VER_LIBSIGCXX.tar.xz | |
268 | cd libsigc++-$VER_LIBSIGCXX | |
269 | cp -f ../config/config.guess build | |
270 | cp -f ../config/config.sub build | |
271 | CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure $C | |
272 | make $PARALLEL | |
273 | make install | |
274 | cd .. | |
275 | ||
276 | # glibmm (needed for libsigrok bindings) | |
277 | $WGET http://ftp.gnome.org/pub/gnome/sources/glibmm/$VER_GLIB_SHORT/glibmm-$VER_GLIB.tar.xz | |
278 | tar xfJ glibmm-$VER_GLIB.tar.xz | |
279 | cd glibmm-$VER_GLIB | |
280 | CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure $C | |
281 | make $PARALLEL | |
282 | make install | |
283 | cd .. | |
284 | ||
285 | fi | |
286 | ||
287 | # libsigrok | |
288 | $GIT_CLONE git://sigrok.org/libsigrok | |
289 | cd libsigrok | |
290 | ./autogen.sh | |
291 | mkdir build | |
292 | cd build | |
293 | CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL" ../configure $C $BINDINGS_CONFIG --datadir=/sdcard | |
294 | make $PARALLEL V=1 | |
295 | make datadir='$(datarootdir)' install | |
296 | cd ../.. | |
297 | ||
298 | # libsigrokdecode | |
299 | $GIT_CLONE git://sigrok.org/libsigrokdecode | |
300 | cd libsigrokdecode | |
301 | ./autogen.sh | |
302 | mkdir build | |
303 | cd build | |
304 | ../configure $C | |
305 | make $PARALLEL V=1 | |
306 | make install | |
307 | cd ../.. | |
308 | ||
309 | # sigrok-cli | |
310 | $GIT_CLONE git://sigrok.org/sigrok-cli | |
311 | cd sigrok-cli | |
312 | ./autogen.sh | |
313 | mkdir build | |
314 | cd build | |
315 | ../configure $C | |
316 | make $PARALLEL V=1 | |
317 | make install | |
318 | cd ../.. | |
319 | ||
320 | # Check if we have all requirements to build PulseView: | |
321 | ||
322 | if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then | |
323 | echo "Android NDK not available, not building PulseView." | |
324 | exit 0 | |
325 | fi | |
326 | ||
327 | if [ -z "$ANDROID_SDK" -o \ | |
328 | ! -d "$ANDROID_SDK"/platforms/android-8 -o \ | |
329 | ! -d "$ANDROID_SDK"/platforms/android-10 -o \ | |
330 | ! -d "$ANDROID_SDK"/platforms/android-11 -o \ | |
331 | ! -d "$ANDROID_SDK"/platforms/android-14 -o \ | |
332 | ! -d "$ANDROID_SDK"/platforms/android-16 ]; then | |
333 | echo "Android SDK with platforms 8 10 11 14 16 not available, not building PulseView." | |
334 | exit 0 | |
335 | fi | |
336 | ||
337 | if [ ! -e "${ANDROID_SDK}/tools/android" ]; then | |
338 | echo "Essential Android build tools not available, not building PulseView." | |
339 | exit 0 | |
340 | fi | |
341 | ||
342 | NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'` | |
343 | ||
344 | # Boost (needed for PulseView) | |
345 | $WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2 | |
346 | tar xfj boost_${VER_BOOST//./_}.tar.bz2 | |
347 | cd boost_${VER_BOOST//./_} | |
348 | patch -p1 < ../../boost.patch | |
349 | ./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system --without-icu | |
350 | echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"-I$PREFIX/include $CPPFLAGS_STL\" <linkflags>\"-L$PREFIX/lib $LDFLAGS_STL -lgnustl_shared\" ;" > user-config.jam | |
351 | ./b2 -q -d+2 --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL | |
352 | cd .. | |
353 | ||
354 | # Qt (needed for PulseView) | |
355 | $WGET http://download.qt-project.org/official_releases/qt/${VER_QT%.*}/${VER_QT}/single/qt-everywhere-opensource-src-${VER_QT}.tar.gz | |
356 | tar xfz qt-everywhere-opensource-src-${VER_QT}.tar.gz | |
357 | cd qt-everywhere-opensource-src-${VER_QT} | |
358 | patch -p1 < ../../android-qt.patch | |
359 | ./configure --prefix="$PREFIX" -developer-build -xplatform android-g++ -nomake tests -nomake examples -android-sdk "$ANDROID_SDK" -android-ndk "$ANDROID_NDK" -android-ndk-host "$NDK_HOST" -android-arch "$TARGET_ARCH" -android-toolchain-version "$NDK_TOOLCHAIN_VERSION" -skip qttranslations -skip qtwebkit -skip qtserialport -skip qtwebkit-examples -skip qtlocation -skip qtconnectivity -opensource -confirm-license | |
360 | make module-qtbase module-qtandroidextras module-qtsvg module-qtimageformats $PARALLEL | |
361 | make install | |
362 | cd .. | |
363 | ||
364 | # sigrok-androidutils | |
365 | $GIT_CLONE git://sigrok.org/sigrok-androidutils | |
366 | cd sigrok-androidutils | |
367 | ./autogen.sh | |
368 | ./configure $C --with-android-sdk="${ANDROID_SDK}" | |
369 | make $PARALLEL V=1 | |
370 | make install | |
371 | cd .. | |
372 | ||
373 | # PulseView | |
374 | $GIT_CLONE git://sigrok.org/pulseview | |
375 | cd pulseview | |
376 | cmake $CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl . | |
377 | make $PARALLEL VERBOSE=1 | |
378 | cd android | |
379 | "${ANDROID_SDK}/tools/android" update project -p . -t android-14 -n PulseView | |
380 | ant debug | |
381 | cd ../.. | |
382 |