]>
Commit | Line | Data |
---|---|---|
ab2ccf3d | 1 | #!/bin/sh |
50f0dffc UH |
2 | ## |
3 | ## This file is part of the sigrok-util project. | |
4 | ## | |
5 | ## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | ## | |
7 | ## This program is free software; you can redistribute it and/or modify | |
8 | ## it under the terms of the GNU General Public License as published by | |
9 | ## the Free Software Foundation; either version 2 of the License, or | |
10 | ## (at your option) any later version. | |
11 | ## | |
12 | ## This program is distributed in the hope that it will be useful, | |
13 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | ## GNU General Public License for more details. | |
16 | ## | |
17 | ## You should have received a copy of the GNU General Public License | |
b65a0b06 | 18 | ## along with this program; if not, see <http://www.gnu.org/licenses/>. |
50f0dffc UH |
19 | ## |
20 | ||
21 | set -e | |
22 | ||
23 | # Uncomment/set the following to match your cross-toolchain setup. | |
24 | # TOOLCHAIN=... | |
25 | # TOOLCHAIN_TRIPLET=... | |
26 | # C="--host=$TOOLCHAIN_TRIPLET" | |
27 | # export PATH=$TOOLCHAIN/bin:$PATH | |
28 | ||
29 | # The path where the compiled packages will be installed. | |
30 | PREFIX=$HOME/sr | |
31 | ||
32 | # The path where to download files to and where to build packages. | |
07947dda | 33 | BUILDDIR=./build |
50f0dffc | 34 | |
91036110 UH |
35 | # The path where the libsigrok Python bindings will be installed. |
36 | PYPATH=$PREFIX/lib/python2.7/site-packages | |
37 | ||
d2012547 UH |
38 | # JDK include path. Usually found automatically, except on FreeBSD. |
39 | if [ `uname` = "FreeBSD" ]; then | |
40 | JDK="--with-jni-include-path=/usr/local/openjdk7/include" | |
41 | fi | |
42 | ||
cabab8f7 | 43 | # Edit this to control verbose build output. |
a58f6b98 | 44 | # V="V=1 VERBOSE=1" |
cabab8f7 | 45 | |
50f0dffc UH |
46 | # Edit this to enable/disable/modify parallel compiles. |
47 | PARALLEL="-j 2" | |
48 | ||
3ed306f8 UH |
49 | # Uncomment the following lines to build with clang and run scan-build. |
50 | # export CC=clang | |
51 | # export CXX=clang++ | |
52 | # SB="scan-build -k -v" | |
53 | ||
50f0dffc UH |
54 | # You usually don't need to change anything below this line. |
55 | ||
56 | # ----------------------------------------------------------------------------- | |
57 | ||
58 | P="$PREFIX/lib/pkgconfig" | |
59 | C="$C --prefix=$PREFIX" | |
60 | ||
61 | # Remove build directory contents (if any) and create a new build dir. | |
62 | rm -rf $BUILDDIR | |
63 | mkdir $BUILDDIR | |
64 | cd $BUILDDIR | |
65 | ||
a51ca6bd UH |
66 | GIT_CLONE="git clone --depth=1" |
67 | ||
80895515 UH |
68 | REPO_BASE="git://sigrok.org" |
69 | ||
50f0dffc UH |
70 | # ----------------------------------------------------------------------------- |
71 | ||
72 | # libserialport | |
80895515 | 73 | $GIT_CLONE $REPO_BASE/libserialport |
50f0dffc UH |
74 | cd libserialport |
75 | ./autogen.sh | |
4ff67f5a UH |
76 | mkdir build |
77 | cd build | |
0f564dab | 78 | $SB ../configure $C |
cabab8f7 UJ |
79 | $SB make $PARALLEL $V |
80 | make install $V | |
4ff67f5a | 81 | cd ../.. |
50f0dffc UH |
82 | |
83 | # libsigrok | |
91036110 | 84 | mkdir -p $PYPATH |
80895515 | 85 | $GIT_CLONE $REPO_BASE/libsigrok |
50f0dffc UH |
86 | cd libsigrok |
87 | ./autogen.sh | |
4ff67f5a UH |
88 | mkdir build |
89 | cd build | |
0f564dab | 90 | PKG_CONFIG_PATH=$P $SB ../configure $C $JDK |
cabab8f7 UJ |
91 | $SB make $PARALLEL $V |
92 | PYTHONPATH=$PYPATH $SB make install $V | |
93 | $SB make check $V | |
4ff67f5a | 94 | cd ../.. |
50f0dffc UH |
95 | |
96 | # libsigrokdecode | |
80895515 | 97 | $GIT_CLONE $REPO_BASE/libsigrokdecode |
50f0dffc UH |
98 | cd libsigrokdecode |
99 | ./autogen.sh | |
4ff67f5a UH |
100 | mkdir build |
101 | cd build | |
0f564dab | 102 | PKG_CONFIG_PATH=$P $SB ../configure $C |
cabab8f7 UJ |
103 | $SB make $PARALLEL $V |
104 | make install $V | |
105 | $SB make check $V | |
4ff67f5a | 106 | cd ../.. |
50f0dffc UH |
107 | |
108 | # sigrok-firmware | |
80895515 | 109 | $GIT_CLONE $REPO_BASE/sigrok-firmware |
50f0dffc UH |
110 | cd sigrok-firmware |
111 | ./autogen.sh | |
4ff67f5a UH |
112 | mkdir build |
113 | cd build | |
50f0dffc | 114 | # Nothing gets cross-compiled here, we just need 'make install' basically. |
0f564dab | 115 | $SB ../configure $C |
cabab8f7 | 116 | make install $V |
4ff67f5a | 117 | cd ../.. |
50f0dffc UH |
118 | |
119 | # sigrok-firmware-fx2lafw | |
80895515 | 120 | $GIT_CLONE $REPO_BASE/sigrok-firmware-fx2lafw |
50f0dffc UH |
121 | cd sigrok-firmware-fx2lafw |
122 | ./autogen.sh | |
4ff67f5a UH |
123 | mkdir build |
124 | cd build | |
50f0dffc | 125 | # We're building the fx2lafw firmware on the host, no need to cross-compile. |
0f564dab | 126 | $SB ../configure $C |
cabab8f7 UJ |
127 | make $PARALLEL $V |
128 | make install $V | |
4ff67f5a | 129 | cd ../.. |
50f0dffc UH |
130 | |
131 | # sigrok-cli | |
80895515 | 132 | $GIT_CLONE $REPO_BASE/sigrok-cli |
50f0dffc UH |
133 | cd sigrok-cli |
134 | ./autogen.sh | |
4ff67f5a UH |
135 | mkdir build |
136 | cd build | |
d2012547 UH |
137 | if [ `uname` = "FreeBSD" ]; then |
138 | # Temporary fix for: http://sigrok.org/bugzilla/show_bug.cgi?id=552 | |
0f564dab | 139 | PKG_CONFIG_PATH=$P $SB ../configure $C LDFLAGS=-lusb |
d2012547 | 140 | else |
0f564dab | 141 | PKG_CONFIG_PATH=$P $SB ../configure $C |
d2012547 | 142 | fi |
cabab8f7 UJ |
143 | $SB make $PARALLEL $V |
144 | make install $V | |
4ff67f5a | 145 | cd ../.. |
50f0dffc UH |
146 | |
147 | # PulseView | |
80895515 | 148 | $GIT_CLONE $REPO_BASE/pulseview |
50f0dffc | 149 | cd pulseview |
4ff67f5a UH |
150 | mkdir build |
151 | cd build | |
803377fc | 152 | PKG_CONFIG_PATH=$P $SB cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y -DCMAKE_EXPORT_COMPILE_COMMANDS=y .. |
cabab8f7 UJ |
153 | $SB make $PARALLEL $V |
154 | make install $V | |
155 | $SB make test $V | |
4ff67f5a | 156 | cd ../.. |