]>
Commit | Line | Data |
---|---|---|
1 | ------------------ | |
2 | * Add firmware for the Instrustar ISDS205B | |
3 | ||
4 | 0.1.7 (2019-11-14) | |
5 | ------------------ | |
6 | ||
7 | * Add firmware for the YiXingDianZi MDSO (VID/PID: 1D50:608E). | |
8 | * Sainsmart DDS120: Fix the 1kHz reference signal. | |
9 | * Hantek 6022BL: Fix the voltage range selection (bug #1360). | |
10 | * Allow LA captures at 48MHz samplerate (as long as bus conditions permit). | |
11 | * Updated build requirement: sdcc >= 3.4.0 (bug #1326). | |
12 | * Fix a build issue with sdcc >= 3.9.0 (bug #1404). | |
13 | * Bump the firmware version (major.minor) to 1.4. This version is | |
14 | backwards-compatible and doesn't require host-side (libsigrok) changes. | |
15 | ||
16 | 0.1.6 (2018-01-26) | |
17 | ------------------ | |
18 | ||
19 | * Fix an issue with FX2 based logic analyzers that could cause non-working | |
20 | and/or prematurely aborted acquisitions (bug #655). | |
21 | * FX2 based logic analyzers will now toggle pin PA1 during acquisition, | |
22 | and keep it high while idle. On fx2grok-tiny and fx2grok-flat devices | |
23 | there's a LED connected to PA1. Thus, those devices will visually indicate | |
24 | whether a firmware has been uploaded (LED will light up and stay like that | |
25 | while the device is idle). During any acquisition the LED will blink. | |
26 | * Refactor the oscilloscope code to avoid duplication (bug #984). | |
27 | * Fix a 'make distclean' error. | |
28 | * Fix a compiler warning with recent sdcc versions (e.g. v3.6.9). | |
29 | ||
30 | 0.1.5 (2017-06-12) | |
31 | ------------------ | |
32 | ||
33 | * Add FX2 firmware for the Hantek 6022BL USB scope/LA. | |
34 | * HACKING: Update URL to Linux kernel coding style. | |
35 | * Remove FSF postal address from boiler plate license text. | |
36 | ||
37 | 0.1.4 (2016-10-31) | |
38 | ------------------ | |
39 | ||
40 | * Add FX2 firmware for the Hantek 6022BE and SainSmart DDS120 USB scopes. | |
41 | These firmware files use the official sigrok USB VID/PID of 1D50:608E. | |
42 | The USB VID/PID pairs are allocated for fx2lafw via the OpenMoko project: | |
43 | http://wiki.openmoko.org/wiki/USB_Product_IDs | |
44 | * Add analog channel support for the USBee AX (and potentially other devices). | |
45 | Only one analog channel is supported. Switching channels (in case there | |
46 | are multiple analog channels) is not yet implemented. | |
47 | * Add support for the USBee ZX (bug #764). | |
48 | * Use per-device USB product string descriptors. | |
49 | * Bump the firmware version (major.minor) to 1.2. This version is | |
50 | backwards-compatible and doesn't require host-side (libsigrok) changes. | |
51 | * README: Update prebuilt firmware download location, other cleanups. | |
52 | * HACKING: Prefer git pull requests over mailing list patches. | |
53 | ||
54 | 0.1.3 (2015-11-26) | |
55 | ------------------ | |
56 | ||
57 | * README: Drop references to obsolete sigrok-commits mailing list. | |
58 | * Build system: | |
59 | - Use non-recursive Make setup. | |
60 | - Simplify and/or improve various parts of the build system. | |
61 | - configure: Check the sdcc version (bug #696). | |
62 | * Add firmware files for FX2 devices with official sigrok VID/PID: | |
63 | - 1D50:608C: fx2lafw-sigrok-fx2-8ch.fw | |
64 | - 1D50:608D: fx2lafw-sigrok-fx2-16ch.fw | |
65 | The USB VID/PID pairs are allocated for fx2lafw via the OpenMoko project: | |
66 | http://wiki.openmoko.org/wiki/USB_Product_IDs | |
67 | ||
68 | 0.1.2 (2014-05-06) | |
69 | ------------------ | |
70 | ||
71 | * Fix an issue which lead to the data pins not being tri-stated after an | |
72 | aquisition (when the GPIF is idle) but rather being driven. | |
73 | * Bump the firmware version (major.minor) to 1.1. This version is | |
74 | backwards-compatible and doesn't require host-side (libsigrok) changes. | |
75 | ||
76 | 0.1.1 (2013-04-16) | |
77 | ------------------ | |
78 | ||
79 | * Add support for the USBee DX. Only digital sampling is supported (as is | |
80 | the case for all other supported devices so far). Analog data acquisition | |
81 | is currently not implemented. | |
82 | * Add support for devices with the older Cypress CY7C68013 (FX2) chip | |
83 | instead of the more recent Cypress CY7C68013A (FX2LP). See also: | |
84 | http://sigrok.org/wiki/Fx2lafw#Cypress_FX2_vs._FX2LP | |
85 | * Convert to a standard autotools based build/configuration system. | |
86 | Installation is now: ./configure && make && make install | |
87 | * README: Update status, website URLs, requirements, etc. | |
88 | * Add the usual HACKING, AUTHORS, and INSTALL files. | |
89 | * Add a 'distbin' Make target, which creates a convenience tarball | |
90 | containing just the generated *.fw files. | |
91 | * Document the download location for the pre-built firmware files tarball. | |
92 | * If 'objcopy' is not found, try to use sdcc's 'makebin' instead. | |
93 | This fixes the build e.g. on some Mac OS X systems without 'objcopy'. | |
94 | * Add support for differently named sdcc tools on various distros. | |
95 | ||
96 | 0.1.0 (2012-07-24) | |
97 | ------------------ | |
98 | ||
99 | * Initial release. | |
100 |