2017-12-17 |
Uwe Hermann | scopes: Factor out SET_COUPLING() and SET_CALIBRATION_PULSE().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out CTL_BIT, OUT0, and OE_CTL.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Use RENUMERATE_UNCOND() for all devices.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Initialize PORTA/C/E consistently for all devices.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out LED_CLEAR(), LED_GREEN(), LED_RED().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out TOGGLE_CALIBRATION_PIN().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out SET_ANALOG_MODE().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Adapt/fix some code comments, cosmetics.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | fx2lafw: Blink LED on pin PA1 during acquisition.
|
commit | commitdiff | tree |
2017-06-12 |
Uwe Hermann | configure.ac: Bump package version to 0.1.5.
|
commit | commitdiff | tree |
2017-06-12 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2017-06-06 |
Uwe Hermann | HACKING: Update URL to Linux kernel coding style.
|
commit | commitdiff | tree |
2017-01-27 |
Uwe Hermann | hantek_6022be.c: Fix a code comment.
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Enable full port A as output on 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Select enable OE0 instead of OE2 in 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Switch from OE2/CTL2 to OE0/CTL0 on 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Set PA7 in 6022BL again before sampling.
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Change I/O ports for voltage selection on 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Set PA7 to high, to select analog mode.
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Change probe cal pin for 6022BL to PC2
|
commit | commitdiff | tree |
2017-01-27 |
Sebastian Tabares... | Initial support for Hantek 6022BL
|
commit | commitdiff | tree |
2017-01-07 |
Gerhard Sittig | license: remove FSF postal address from boiler plate...
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | configure.ac: Bump package version to 0.1.4.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Increase FX2LAFW_VERSION_MINOR to 2.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Use per-device USB serial number strings.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Add "fx2lafw-" prefix to the 6022BE/DDS120 firmware...
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Use the same VID/PID for Hantek 6022BE and SainSmart...
|
commit | commitdiff | tree |
2016-10-12 |
Uwe Hermann | Makefile.am: Remove unneeded duplication.
|
commit | commitdiff | tree |
2016-10-08 |
Uwe Hermann | Add and use macros to simplify USB descriptor files.
|
commit | commitdiff | tree |
2016-09-03 |
Uwe Hermann | Makefile.am: Add dscr_hantek_6022be.inc to the tarball.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | HACKING: Prefer git pull requests over mailing list...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | README: Drop obsolete and unneeded section.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | gpif-acquisition.c: Minor cosmetics, drop obsolete...
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Refactor and bugfix the delay adding code for analog...
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Remove bogus part of OUTPUT used for analog sampling
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Fix typo in gpif_make_data_dp_state function name
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Change arguments of gpif_make_delay_state() to remove...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr*.inc: Document polling intervals better.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr_hantek_6022be.inc: Fix incorrect comments, add...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr_hantek_6022be.inc: Change vendor string to "sigrok".
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr_hantek_6022be.inc: Cosmetic and consistency changes.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr.inc: Shorten representation of two strings.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | hantek-6022be/sainsmart-dds120: Hook up correct per...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | Deduplicate hantek-6022be/sainsmart-dds120's dscr.inc.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | hantek-6022be/sainsmart-dds120: Use the same USB product...
|
commit | commitdiff | tree |
2016-07-12 |
Uwe Hermann | README: Mention the Sainsmart DDS120 firmware.
|
commit | commitdiff | tree |
2016-07-12 |
Uwe Hermann | Add CWAV USBee ZX firmware support.
|
commit | commitdiff | tree |
2016-05-25 |
Benjamin Larsson | Silence warnings
|
commit | commitdiff | tree |
2016-05-18 |
Uwe Hermann | Add a few more code comments.
|
commit | commitdiff | tree |
2016-05-18 |
Benjamin Larsson | fx2lafw: clock CTL1 the same as CTL2
|
commit | commitdiff | tree |
2016-05-04 |
Markus Siegert | Use 1D50:608E for open source Sainsmart DDS120 firmware
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Support changing calibration pulse frequency
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Add more sample rates
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Add support for setting Sainsmart AC/DC coupling
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Initial Sainsmart DDS120 firmware
|
commit | commitdiff | tree |
2016-04-29 |
Benjamin Larsson | Add CMD_START_FLAGS_CLK_CTL2 command flag
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hw/hantek-6022be/dscr.a51: License header cosmetics.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Simplify handle_vendorcommand().
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Minor cosmetics.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Make a few variables and functions...
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Move main() for consistency.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Adapt to fx2lafw coding style, minor...
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Drop unneeded debug code, random cruft.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | README: Update to mention the Hantek 6022BE firmware.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Fix build error.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | Makefile.am: Hook up building of hantek-6022be.fw.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | Add FX2 firmware for the Hantek 6022BE USB scope.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | README: Update prebuilt firmware download location.
|
commit | commitdiff | tree |
2015-11-26 |
Uwe Hermann | configure.ac: Bump package version to 0.1.3.
|
commit | commitdiff | tree |
2015-11-26 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2015-11-26 |
Uwe Hermann | README: Any sdcc 3.x version works fine.
|
commit | commitdiff | tree |
2015-11-09 |
Daniel Elstner | Update git ignore list
|
commit | commitdiff | tree |
2015-11-09 |
Daniel Elstner | build: Switch to non-recursive make
|
commit | commitdiff | tree |
2015-10-24 |
Uwe Hermann | Add fx2lafw firmware for FX2 devices with sigrok VID...
|
commit | commitdiff | tree |
2015-04-07 |
Uwe Hermann | autogen.sh: Drop obsolete MinGW/MSYS items.
|
commit | commitdiff | tree |
2014-07-22 |
Uwe Hermann | Drop references to obsolete sigrok-commits mailing...
|
commit | commitdiff | tree |
2014-05-06 |
Uwe Hermann | configure.ac: Bump package version to 0.1.2.
|
commit | commitdiff | tree |
2014-05-06 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2014-05-06 |
Uwe Hermann | Increase FX2LAFW_VERSION_MINOR to 1.
|
commit | commitdiff | tree |
2013-06-27 |
Uwe Hermann | Bugfix: Tristate pins after acquisition.
|
commit | commitdiff | tree |
2013-04-26 |
Uwe Hermann | README: Add "Copyright and license" section.
|
commit | commitdiff | tree |
2013-04-23 |
Uwe Hermann | GPL headers: Use correct project name.
|
commit | commitdiff | tree |
2013-04-16 |
Uwe Hermann | Prepare for the 0.1.1 release.
|
commit | commitdiff | tree |
2013-04-16 |
Uwe Hermann | COPYING.LESSER: Replace LGPLv3 with LGPLv2.1.
|
commit | commitdiff | tree |
2013-04-16 |
Uwe Hermann | Document the download for pre-built firmware files.
|
commit | commitdiff | tree |
2013-04-16 |
Uwe Hermann | README: sdcc 3.2.x works fine, document that.
|
commit | commitdiff | tree |
2013-03-17 |
Uwe Hermann | Fix parallel build (e.g. via "-j 2").
|
commit | commitdiff | tree |
2013-03-17 |
Uwe Hermann | NEWS: Fix typo.
|
commit | commitdiff | tree |
2013-03-17 |
Uwe Hermann | configure.ac: Fix typo in 'sdcc-sdcclib'.
|
commit | commitdiff | tree |
2013-03-17 |
Uwe Hermann | Abort configure if the required tools are not found.
|
commit | commitdiff | tree |
2013-03-17 |
Uwe Hermann | README: Refer to INSTALL and new Building wiki page.
|
commit | commitdiff | tree |
2013-03-07 |
Uwe Hermann | Support sdcc tool names as used on Fedora.
|
commit | commitdiff | tree |
2013-03-03 |
Uwe Hermann | Fixup DESTDIR usage.
|
commit | commitdiff | tree |
2013-03-03 |
Alexandru Gagniuc | buildsystem: Obey DESTDIR when running make install
|
commit | commitdiff | tree |
2013-02-22 |
Uwe Hermann | Support older Cypress FX2 (not FX2LP) too.
|
commit | commitdiff | tree |
2013-02-22 |
Uwe Hermann | NEWS: Add user-visible changes so far.
|
commit | commitdiff | tree |
2013-02-22 |
Uwe Hermann | README: Add all build dependencies.
|
commit | commitdiff | tree |
2013-02-22 |
Uwe Hermann | (Re-)add the convenience target 'distbin'.
|
commit | commitdiff | tree |
2013-02-22 |
Uwe Hermann | Use a standard autotools setup.
|
commit | commitdiff | tree |
next |