## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
set -e
# The path where the libsigrok Python bindings will be installed.
PYPATH=$PREFIX/lib/python2.7/site-packages
+# Edit this to control verbose build output.
+# V="V=1 VERBOSE=1"
+
# Edit this to enable/disable/modify parallel compiles.
-PARALLEL="-j 2"
+PARALLEL="-j "`sysctl -n hw.ncpu`
# Uncomment the following lines to build with clang and run scan-build.
# export CC=llvm-gcc
# SB="scan-build -k -v"
# Uncomment the following lines to build with gcc/g++.
-export CC=gcc-4.9
-export CXX=g++-4.9
+export CC=gcc
+export CXX=g++
-# Path to Qt binaries (needed for cmake to find the Qt libs).
-# export PATH="/usr/local/opt/qt/bin:$PATH" # Qt4
-export PATH="/usr/local/opt/qt52/bin:$PATH" # Qt5
+# We use Qt 5.5 in order to remain compatible with more versions of Mac OS X.
+QTVER=qt@5.5
-# Path to Python 2/3 pkg-config files.
-# In Homebrew, pkg-config files of "keg-only" formulas (Python is one of them)
-# aren't installed into /usr/local/lib/pkgconfig (we manually reference them).
-PY2="/usr/local/opt/python/Frameworks/Python.framework/Versions/2.7/lib/pkgconfig"
-PY3="/usr/local/opt/python3/Frameworks/Python.framework/Versions/3.4/lib/pkgconfig"
+# Path to Qt5 binaries (needed for cmake to find the Qt5 libs).
+export PATH="$(brew --prefix $QTVER)/bin:$PATH"
# You usually don't need to change anything below this line.
# -----------------------------------------------------------------------------
-P="$PREFIX/lib/pkgconfig:$PY2:$PY3"
+# PKG_CONFIG_PATH will need to point to pkg-config files of Homebrew's
+# keg-only formulae.
+P="$PREFIX/lib/pkgconfig"
+for FORMULA in libffi python@2 python@3 "$QTVER"; do
+ P="$P:$(brew --prefix "$FORMULA")/lib/pkgconfig"
+done
+
+# Extra options to pass to configure.
C="$C --prefix=$PREFIX"
# Remove build directory contents (if any) and create a new build dir.
GIT_CLONE="git clone --depth=1"
+REPO_BASE="git://sigrok.org"
+
# -----------------------------------------------------------------------------
# libserialport
-$GIT_CLONE git://sigrok.org/libserialport
+$GIT_CLONE $REPO_BASE/libserialport
cd libserialport
./autogen.sh
mkdir build
cd build
../configure $C
-$SB make $PARALLEL
-make install
+$SB make $PARALLEL $V
+make install $V
cd ../..
# libsigrok
mkdir -p $PYPATH
-$GIT_CLONE git://sigrok.org/libsigrok
+$GIT_CLONE $REPO_BASE/libsigrok
cd libsigrok
./autogen.sh
mkdir build
cd build
-PKG_CONFIG_PATH=$P ../configure $C --disable-java
-$SB make $PARALLEL
-PYTHONPATH=$PYPATH $SB make install
-$SB make check
+PKG_CONFIG_PATH=$P ../configure $C
+$SB make $PARALLEL $V
+PYTHONPATH=$PYPATH $SB make install $V
+$SB make check $V
cd ../..
# libsigrokdecode
-$GIT_CLONE git://sigrok.org/libsigrokdecode
+$GIT_CLONE $REPO_BASE/libsigrokdecode
cd libsigrokdecode
./autogen.sh
mkdir build
cd build
PKG_CONFIG_PATH=$P ../configure $C
-$SB make $PARALLEL
-make install
-$SB make check
+$SB make $PARALLEL $V
+make install $V
+$SB make check $V
cd ../..
# sigrok-firmware
-$GIT_CLONE git://sigrok.org/sigrok-firmware
+$GIT_CLONE $REPO_BASE/sigrok-firmware
cd sigrok-firmware
./autogen.sh
mkdir build
cd build
# Nothing gets cross-compiled here, we just need 'make install' basically.
../configure $C
-make install
+make install $V
cd ../..
# sigrok-firmware-fx2lafw
-$GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw
+$GIT_CLONE $REPO_BASE/sigrok-firmware-fx2lafw
cd sigrok-firmware-fx2lafw
./autogen.sh
mkdir build
cd build
# We're building the fx2lafw firmware on the host, no need to cross-compile.
../configure $C
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ../..
# sigrok-cli
-$GIT_CLONE git://sigrok.org/sigrok-cli
+$GIT_CLONE $REPO_BASE/sigrok-cli
cd sigrok-cli
./autogen.sh
mkdir build
cd build
PKG_CONFIG_PATH=$P ../configure $C
-$SB make $PARALLEL
-make install
+$SB make $PARALLEL $V
+make install $V
cd ../..
# PulseView
-$GIT_CLONE git://sigrok.org/pulseview
+$GIT_CLONE $REPO_BASE/pulseview
cd pulseview
mkdir build
cd build
PKG_CONFIG_PATH=$P $SB cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y ..
-$SB make $PARALLEL
-make install
-$SB make test
+$SB make $PARALLEL $V
+make install $V
+$SB make test $V
cd ../..