3 ## This file is part of the sigrok-util project.
5 ## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
7 ## This program is free software; you can redistribute it and/or modify
8 ## it under the terms of the GNU General Public License as published by
9 ## the Free Software Foundation; either version 2 of the License, or
10 ## (at your option) any later version.
12 ## This program is distributed in the hope that it will be useful,
13 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
14 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 ## GNU General Public License for more details.
17 ## You should have received a copy of the GNU General Public License
18 ## along with this program; if not, write to the Free Software
19 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
24 # Uncomment/set the following to match your cross-toolchain setup.
26 # TOOLCHAIN_TRIPLET=...
27 # C="--host=$TOOLCHAIN_TRIPLET"
28 # export PATH=$TOOLCHAIN/bin:$PATH
30 # The path where the compiled packages will be installed.
33 # The path where to download files to and where to build packages.
36 # The path where the libsigrok Python bindings will be installed.
37 PYPATH=$PREFIX/lib/python2.7/site-packages
39 # Edit this to control verbose build output.
42 # Edit this to enable/disable/modify parallel compiles.
45 # Uncomment the following lines to build with clang and run scan-build.
48 # SB="scan-build -k -v"
50 # You usually don't need to change anything below this line.
52 # -----------------------------------------------------------------------------
54 P="$PREFIX/lib/pkgconfig"
55 C="$C --prefix=$PREFIX"
57 # Remove build directory contents (if any) and create a new build dir.
62 GIT_CLONE="git clone --depth=1"
64 # -----------------------------------------------------------------------------
67 $GIT_CLONE git://sigrok.org/libserialport
79 $GIT_CLONE git://sigrok.org/libsigrok
84 PKG_CONFIG_PATH=$P ../configure $C
86 PYTHONPATH=$PYPATH $SB make install $V
91 $GIT_CLONE git://sigrok.org/libsigrokdecode
96 PKG_CONFIG_PATH=$P ../configure $C
103 $GIT_CLONE git://sigrok.org/sigrok-firmware
108 # Nothing gets cross-compiled here, we just need 'make install' basically.
113 # sigrok-firmware-fx2lafw
114 $GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw
115 cd sigrok-firmware-fx2lafw
119 # We're building the fx2lafw firmware on the host, no need to cross-compile.
126 $GIT_CLONE git://sigrok.org/sigrok-cli
131 PKG_CONFIG_PATH=$P ../configure $C
132 $SB make $PARALLEL $V
137 $GIT_CLONE git://sigrok.org/pulseview
141 PKG_CONFIG_PATH=$P $SB cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y ..
142 $SB make $PARALLEL $V