3 ## This file is part of the sigrok-util project.
5 ## Copyright (C) 2013-2015 Uwe Hermann <uwe@hermann-uwe.de>
6 ## Copyright (C) 2013-2015 Marcus Comstedt <marcus@mc.pp.se>
8 ## This program is free software; you can redistribute it and/or modify
9 ## it under the terms of the GNU General Public License as published by
10 ## the Free Software Foundation; either version 2 of the License, or
11 ## (at your option) any later version.
13 ## This program is distributed in the hope that it will be useful,
14 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
15 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 ## GNU General Public License for more details.
18 ## You should have received a copy of the GNU General Public License
19 ## along with this program; if not, write to the Free Software
20 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
25 # The path where the NDK, SDK, and toolchains are located.
26 ANDROID_PATH=$HOME/android
28 # The path where the Android NDK is located.
29 ANDROID_NDK=$ANDROID_PATH/android-ndk-r10d
31 # The path where the Android SDK is located.
32 ANDROID_SDK=$ANDROID_PATH/android-sdk-linux
34 # The path where your Android toolchain directory is located.
35 TOOLCHAIN=$ANDROID_PATH/android-arm-toolchain
36 # TOOLCHAIN=$ANDROID_PATH/android-mipsel-toolchain
37 # TOOLCHAIN=$ANDROID_PATH/android-i686-toolchain
38 # TOOLCHAIN=$ANDROID_NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86
39 # TOOLCHAIN=$ANDROID_NDK/toolchains/x86-4.9/prebuilt/linux-x86
40 # TOOLCHAIN=$ANDROID_NDK/toolchains/mipsel-linux-android-4.9/prebuilt/linux-x86
42 # Select which Android toolchain to use.
43 # Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
44 TOOLCHAIN_TRIPLET=arm-linux-androideabi
45 # TOOLCHAIN_TRIPLET=mipsel-linux-android
46 # TOOLCHAIN_TRIPLET=i686-linux-android
48 # The path where the cross-compiled packages will be installed.
49 PREFIX=$HOME/sr_android
51 # The path where to download files to and where to build packages.
54 # Edit this to control verbose build output.
57 # Edit this to enable/disable/modify parallel compiles.
60 # You usually don't need to change anything below this line.
62 # -----------------------------------------------------------------------------
72 VER_LIBSIGCXX_SHORT=2.4
81 VER_AND_BT=22.0.1 # android build tools version
82 VER_AND_API=16 # target android API version
84 SF_MIRROR=download.sourceforge.net
87 GIT_CLONE="git clone --depth=1"
89 case "$TOOLCHAIN_TRIPLET" in
90 arm*) TARGET_ARCH=armeabi;;
91 mips*) TARGET_ARCH=mips;;
92 i686*) TARGET_ARCH=x86;;
93 *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET."; exit 1;;
96 # -----------------------------------------------------------------------------
98 # Get the Android NDK and SDK, install required packages and toolchains.
99 if [ "x$1" = "xprepare" ]; then
100 mkdir -p $ANDROID_PATH
104 $WGET http://dl.google.com/android/ndk/android-ndk-r$VER_NDK-linux-x86.bin
105 chmod 700 android-ndk-r$VER_NDK-linux-x86.bin
106 ./android-ndk-r$VER_NDK-linux-x86.bin
107 cd android-ndk-r$VER_NDK
108 ./build/tools/make-standalone-toolchain.sh --platform=android-16 \
109 --toolchain=arm-linux-androideabi-4.9 \
110 --install-dir=$ANDROID_PATH/android-arm-toolchain
114 $WGET http://dl.google.com/android/android-sdk_r$VER_SDK-linux.tgz
115 tar xfz android-sdk_r$VER_SDK-linux.tgz
117 ./tools/android update sdk --no-ui --filter platform-tools,build-tools-$VER_AND_BT,android-$VER_AND_API
123 # -----------------------------------------------------------------------------
125 # Remove build directory contents (if any) and create a new build dir.
130 # -----------------------------------------------------------------------------
132 # Build host Python before we start messing with the environment.
133 # Don't do parallel builds, this doesn't seem to work well.
134 $WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
135 tar xfJ Python-$VER_PYTHON.tar.xz
136 cd Python-$VER_PYTHON
142 # -----------------------------------------------------------------------------
144 # We need to find tools in the toolchain.
145 export PATH=$TOOLCHAIN/bin:$PATH
147 # Tell pkg-config to only look for our cross-built stuff.
148 export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
149 export -n PKG_CONFIG_PATH
152 if test -d "$TOOLCHAIN"/sysroot; then
153 echo "Toolchain is standalone"
154 STANDALONE_TOOLCHAIN=$TOOLCHAIN
157 STANDALONE_TOOLCHAIN=
158 NATIVE_API_LEVEL=$VER_AND_API
159 SYSROOT_DIR=${ANDROID_NDK}/platforms/android-${NATIVE_API_LEVEL}/arch-${TARGET_ARCH%eabi*}
160 if [ ! -d "$SYSROOT_DIR" ]; then
161 echo >&2 "Can't build with NDK toolchain; sysroot $SYSROOT_DIR is missing"
164 SYSROOT="--sysroot $SYSROOT_DIR"
165 CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT"
166 CXX="$TOOLCHAIN_TRIPLET-g++ $SYSROOT"
169 NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
171 # Define some helper variables.
172 C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
173 CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX}"
174 if [ -n "$STANDALONE_TOOLCHAIN" ]; then
175 CM="$CM -DANDROID_STANDALONE_TOOLCHAIN=${STANDALONE_TOOLCHAIN}"
176 if [ -d "${ANDROID_NDK}/sources/cxx-stl" ]; then
177 CM="$CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl"
180 CM="$CM -DANDROID_NDK=${ANDROID_NDK}"
181 CM="$CM -DANDROID_NATIVE_API_LEVEL=${NATIVE_API_LEVEL}"
182 CM="$CM -DANDROID_TOOLCHAIN_NAME=${TOOLCHAIN_TRIPLET}-${NDK_TOOLCHAIN_VERSION}"
185 # Look for STL, needed to build bindings
186 STL_BASE="${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}"
187 if [ -d ${STL_BASE}/include ]; then
188 CPPFLAGS_STL="-I${STL_BASE}/include -I${STL_BASE}/libs/${TARGET_ARCH}/include"
189 LDFLAGS_STL="-L${STL_BASE}/libs/${TARGET_ARCH} -Wl,-rpath=${STL_BASE}/libs/${TARGET_ARCH}"
190 BINDINGS_CONFIG="--enable-bindings"
192 echo "Warning: STL unavailable, libsigrok bindings will not be built."
195 BINDINGS_CONFIG="--disable-bindings"
198 # -----------------------------------------------------------------------------
200 # Get the latest versions of config.guess/config.sub that know about Android.
201 $GIT_CLONE git://git.savannah.gnu.org/config.git
203 # Get a toolchain for cmake that knows about Android.
204 $WGET https://android-cmake.googlecode.com/hg/toolchain/android.toolchain.cmake
205 patch < ../android.toolchain.cmake.patch android.toolchain.cmake
207 # -----------------------------------------------------------------------------
209 # Python (needed for libsigrokdecode)
210 # Don't do parallel Python builds, this doesn't seem to work well.
211 cd Python-$VER_PYTHON
214 patch -p1 < ../../Python-$VER_PYTHON.patch
215 ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
216 sed -i "s/^#zlib/zlib/g" Modules/Setup
217 make PYTHON_FOR_BUILD='_PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) ./hostpython' install $V
220 # libiconv (needed for glib)
221 $WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
222 tar xfz libiconv-$VER_LIBICONV.tar.gz
223 cd libiconv-$VER_LIBICONV
224 cp -f ../config/config.guess build-aux
225 cp -f ../config/config.sub build-aux
226 cp -f ../config/config.guess libcharset/build-aux
227 cp -f ../config/config.sub libcharset/build-aux
228 ./configure $C --enable-shared
229 make lib/localcharset.h $V
237 test -d $PREFIX/include || mkdir $PREFIX/include
238 cp include/iconv.h.inst $PREFIX/include/iconv.h
241 # gettext (needed for glib)
242 $WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
243 tar xfz gettext-$VER_GETTEXT.tar.gz
244 cd gettext-$VER_GETTEXT
245 ./configure $C --enable-shared --disable-libasprintf
251 # zlib (needed for glib and libzip)
252 $WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
253 tar xfz zlib-$VER_ZLIB.tar.gz
255 # Note: zlib's configure doesn't understand --host, we need to pass $CC.
256 CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT" ./configure --prefix=$PREFIX
261 # pcre (needed for glib)
262 $WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
263 tar xfz pcre-$VER_PCRE.tar.gz
265 ./configure $C --disable-cpp
270 # libffi (needed for glib)
271 $WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
272 tar xfz libffi-$VER_LIBFFI.tar.gz
273 cd libffi-$VER_LIBFFI
279 # glib (needed for libsigrok)
280 $WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
281 tar xfJ glib-$VER_GLIB.tar.xz
283 NOCONFIGURE=yes ./autogen.sh
284 # Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
285 LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
290 # libzip (needed for libsigrok)
291 $WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
292 tar xfz libzip-$VER_LIBZIP.tar.gz
293 cd libzip-$VER_LIBZIP
294 cp -f ../config/config.guess .
295 cp -f ../config/config.sub .
301 # libusb-1.0 (needed for libsigrok)
302 $WGET http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB/libusb-$VER_LIBUSB.tar.bz2
303 tar xfj libusb-$VER_LIBUSB.tar.bz2
304 cd libusb-$VER_LIBUSB
305 patch -p1 < ../../libusb-1.0.patch
306 ./configure $C --disable-udev
311 # libftdi1 (needed for libsigrok)
312 $WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2
313 tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2
314 cd libftdi1-$VER_LIBFTDI1
315 cmake $CM -DFTDIPP=no -DDOCUMENTATION=no -DEXAMPLES=no -DFTDI_EEPROM=no -DPYTHON_BINDINGS=no .
321 $GIT_CLONE git://sigrok.org/libserialport
331 # Build dependencies for libsigrok bindings if needed
333 if [ x"$CPPFLAGS_STL" != x ]; then
335 # libsigc++ (needed for glibmm)
336 $WGET http://ftp.gnome.org/pub/gnome/sources/libsigc++/$VER_LIBSIGCXX_SHORT/libsigc++-$VER_LIBSIGCXX.tar.xz
337 tar xfJ libsigc++-$VER_LIBSIGCXX.tar.xz
338 cd libsigc++-$VER_LIBSIGCXX
339 cp -f ../config/config.guess build
340 cp -f ../config/config.sub build
341 CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
346 # glibmm (needed for libsigrok bindings)
347 $WGET http://ftp.gnome.org/pub/gnome/sources/glibmm/$VER_GLIB_SHORT/glibmm-$VER_GLIB.tar.xz
348 tar xfJ glibmm-$VER_GLIB.tar.xz
350 CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
358 $GIT_CLONE git://sigrok.org/libsigrok
363 CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL" ../configure $C $BINDINGS_CONFIG --datadir=/sdcard
365 make datadir='$(datarootdir)' install $V
369 $GIT_CLONE git://sigrok.org/libsigrokdecode
380 $GIT_CLONE git://sigrok.org/sigrok-cli
390 # Check if we have all requirements to build PulseView:
392 if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then
393 echo "Android NDK not available, not building PulseView."
397 if [ -z "$ANDROID_SDK" -o ! -d "$ANDROID_SDK"/platforms/android-$VER_AND_API ]; then
398 echo "Android SDK with platform $VER_AND_API not available, not building PulseView."
402 if [ ! -e "${ANDROID_SDK}/tools/android" ]; then
403 echo "Essential Android build tools not available, not building PulseView."
407 NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'`
409 # Boost (needed for PulseView)
410 $WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2
411 tar xfj boost_${VER_BOOST//./_}.tar.bz2
412 cd boost_${VER_BOOST//./_}
413 CC= ./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system,thread,test --without-icu
414 echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"$SYSROOT -I$PREFIX/include $CPPFLAGS_STL\" <linkflags>\"$SYSROOT -L$PREFIX/lib $LDFLAGS_STL -lgnustl_shared\" ;" > user-config.jam
415 ./b2 -q -d+2 --ignore-site-config --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL
418 # Qt (needed for PulseView)
419 $WGET http://download.qt-project.org/official_releases/qt/${VER_QT%.*}/${VER_QT}/single/qt-everywhere-opensource-src-${VER_QT}.tar.gz
420 tar xfz qt-everywhere-opensource-src-${VER_QT}.tar.gz
421 cd qt-everywhere-opensource-src-${VER_QT}
422 patch -p1 < ../../android-qt.patch
423 CC= CXX= ./configure \
426 -xplatform android-g++ \
429 -android-sdk "$ANDROID_SDK" \
430 -android-ndk "$ANDROID_NDK" \
431 -android-ndk-host "$NDK_HOST" \
432 -android-arch "$TARGET_ARCH" \
433 -android-toolchain-version "$NDK_TOOLCHAIN_VERSION" \
434 -skip qttranslations \
437 -skip qtwebkit-examples \
439 -skip qtconnectivity \
440 -opensource -confirm-license -silent
441 export ANDROID_API_VERSION=android-$VER_AND_API
442 export ANDROID_BUILD_TOOLS_REVISION=$VER_AND_BT
443 make module-qtbase module-qtandroidextras module-qtsvg module-qtimageformats $PARALLEL $V
447 # sigrok-androidutils
448 $GIT_CLONE git://sigrok.org/sigrok-androidutils
449 cd sigrok-androidutils
451 ./configure $C --with-android-sdk="${ANDROID_SDK}" --with-android-platform=android-$VER_AND_API
456 # Strip all shared libs to reduce size.
457 find $PREFIX -iname "*.so" -exec ${TOOLCHAIN_TRIPLET}-strip -S {} \;
460 $GIT_CLONE git://sigrok.org/pulseview
462 cmake $CM -DENABLE_TESTS=y .
465 ${TOOLCHAIN_TRIPLET}-strip -S libs/$TARGET_ARCH/libpulseview.so
467 "${ANDROID_SDK}/tools/android" update project -p . -t android-$VER_AND_API -n PulseView