3 ## This file is part of the sigrok-util project.
5 ## Copyright (C) 2013-2015 Uwe Hermann <uwe@hermann-uwe.de>
6 ## Copyright (C) 2013-2015 Marcus Comstedt <marcus@mc.pp.se>
8 ## This program is free software; you can redistribute it and/or modify
9 ## it under the terms of the GNU General Public License as published by
10 ## the Free Software Foundation; either version 2 of the License, or
11 ## (at your option) any later version.
13 ## This program is distributed in the hope that it will be useful,
14 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
15 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 ## GNU General Public License for more details.
18 ## You should have received a copy of the GNU General Public License
19 ## along with this program; if not, see <http://www.gnu.org/licenses/>.
24 # The path where the NDK, SDK, and toolchains are located.
25 ANDROID_PATH=$HOME/android
27 # The path where the Android NDK is located.
28 ANDROID_NDK=$ANDROID_PATH/android-ndk-r10e
30 # The path where the Android SDK is located.
31 ANDROID_SDK=$ANDROID_PATH/android-sdk-linux
33 # The path where your Android toolchain directory is located.
34 # TOOLCHAIN=$ANDROID_PATH/android-arm-toolchain
35 # TOOLCHAIN=$ANDROID_PATH/android-mipsel-toolchain
36 # TOOLCHAIN=$ANDROID_PATH/android-i686-toolchain
37 TOOLCHAIN=$ANDROID_NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86
38 # TOOLCHAIN=$ANDROID_NDK/toolchains/x86-4.9/prebuilt/linux-x86
39 # TOOLCHAIN=$ANDROID_NDK/toolchains/mipsel-linux-android-4.9/prebuilt/linux-x86
41 # Select which Android toolchain to use.
42 # Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
43 TOOLCHAIN_TRIPLET=arm-linux-androideabi
44 # TOOLCHAIN_TRIPLET=mipsel-linux-android
45 # TOOLCHAIN_TRIPLET=i686-linux-android
47 # The path where the cross-compiled packages will be installed.
48 PREFIX=$HOME/sr_android
50 # The path where to download files to and where to build packages.
53 # Edit this to control verbose build output.
56 # Edit this to enable/disable/modify parallel compiles.
59 # You usually don't need to change anything below this line.
61 # -----------------------------------------------------------------------------
73 VER_LIBSIGCXX_SHORT=2.9
81 VER_SIGROK_FIRMWARE_FX2LAFW=0.1.6
84 VER_AND_BT=23.0.2 # Android build tools version
85 VER_AND_API=16 # Target Android API version
87 SF_MIRROR=download.sourceforge.net
89 WGET="wget -c --quiet"
90 GIT_CLONE="git clone --depth=1"
92 REPO_BASE="git://sigrok.org"
94 case "$TOOLCHAIN_TRIPLET" in
95 arm*) TARGET_ARCH=armeabi;;
96 mips*) TARGET_ARCH=mips;;
97 i686*) TARGET_ARCH=x86;;
98 *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET."; exit 1;;
101 # -----------------------------------------------------------------------------
103 # Get the Android NDK and SDK, install required packages and toolchains.
104 if [ "x$1" = "xprepare" ]; then
105 mkdir -p $ANDROID_PATH
109 $WGET http://dl.google.com/android/ndk/android-ndk-r$VER_NDK-linux-x86.bin
110 chmod 700 android-ndk-r$VER_NDK-linux-x86.bin
111 ./android-ndk-r$VER_NDK-linux-x86.bin -y
112 cd android-ndk-r$VER_NDK
113 ./build/tools/make-standalone-toolchain.sh --platform=android-$VER_AND_API \
114 --toolchain=arm-linux-androideabi-4.9 \
115 --install-dir=$ANDROID_PATH/android-arm-toolchain
116 ./build/tools/make-standalone-toolchain.sh --platform=android-$VER_AND_API \
117 --toolchain=x86-4.9 \
118 --install-dir=$ANDROID_PATH/android-i686-toolchain
119 ./build/tools/make-standalone-toolchain.sh --platform=android-$VER_AND_API \
120 --toolchain=mipsel-linux-android-4.9 \
121 --install-dir=$ANDROID_PATH/android-mipsel-toolchain
125 $WGET http://dl.google.com/android/android-sdk_r$VER_SDK-linux.tgz
126 tar xfz android-sdk_r$VER_SDK-linux.tgz
128 echo y | ./tools/android update sdk --no-ui --all --filter platform-tools,build-tools-$VER_AND_BT,android-$VER_AND_API
134 # -----------------------------------------------------------------------------
136 # Remove build directory contents (if any) and create a new build dir.
141 # -----------------------------------------------------------------------------
143 # Build host Python before we start messing with the environment.
144 # Don't do parallel builds, this doesn't seem to work well.
145 $WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
146 tar xfJ Python-$VER_PYTHON.tar.xz
147 cd Python-$VER_PYTHON
153 # -----------------------------------------------------------------------------
155 # We need to find tools in the toolchain.
156 export PATH=$TOOLCHAIN/bin:$PATH
158 # Tell pkg-config to only look for our cross-built stuff.
159 export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
160 export -n PKG_CONFIG_PATH
163 if test -d "$TOOLCHAIN"/sysroot; then
164 echo "Toolchain is standalone"
165 STANDALONE_TOOLCHAIN=$TOOLCHAIN
168 STANDALONE_TOOLCHAIN=
169 NATIVE_API_LEVEL=$VER_AND_API
170 SYSROOT_DIR=${ANDROID_NDK}/platforms/android-${NATIVE_API_LEVEL}/arch-${TARGET_ARCH%eabi*}
171 if [ ! -d "$SYSROOT_DIR" ]; then
172 echo >&2 "Can't build with NDK toolchain; sysroot $SYSROOT_DIR is missing"
175 SYSROOT="--sysroot $SYSROOT_DIR"
176 CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT"
177 CXX="$TOOLCHAIN_TRIPLET-g++ $SYSROOT"
180 NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
182 # Define some helper variables.
183 C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
184 CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX}"
185 if [ -n "$STANDALONE_TOOLCHAIN" ]; then
186 CM="$CM -DANDROID_STANDALONE_TOOLCHAIN=${STANDALONE_TOOLCHAIN}"
187 if [ -d "${ANDROID_NDK}/sources/cxx-stl" ]; then
188 CM="$CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl"
191 CM="$CM -DANDROID_NDK=${ANDROID_NDK}"
192 CM="$CM -DANDROID_NATIVE_API_LEVEL=${NATIVE_API_LEVEL}"
193 CM="$CM -DANDROID_TOOLCHAIN_NAME=${TOOLCHAIN_TRIPLET}-${NDK_TOOLCHAIN_VERSION}"
194 CM="$CM -DCMAKE_MAKE_PROGRAM=${ANDROID_NDK}/prebuilt/linux-x86/bin/make"
197 # Look for STL, needed to build bindings
198 STL_BASE="${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}"
199 if [ -d ${STL_BASE}/include ]; then
200 CPPFLAGS_STL="-I${STL_BASE}/include -I${STL_BASE}/libs/${TARGET_ARCH}/include"
201 LDFLAGS_STL="-L${STL_BASE}/libs/${TARGET_ARCH} -Wl,-rpath=${STL_BASE}/libs/${TARGET_ARCH}"
202 BINDINGS_CONFIG="--enable-bindings"
204 echo "Warning: STL unavailable, libsigrok bindings will not be built."
207 BINDINGS_CONFIG="--disable-bindings"
210 # -----------------------------------------------------------------------------
212 # Get the latest versions of config.guess/config.sub that know about Android.
213 $GIT_CLONE http://git.savannah.gnu.org/r/config.git
215 # Get a toolchain for cmake that knows about Android.
216 $WGET https://raw.githubusercontent.com/arithran/android-cmake/master/toolchain/android.toolchain.cmake
217 patch < ../android.toolchain.cmake.patch android.toolchain.cmake
219 # -----------------------------------------------------------------------------
221 # Python (needed for libsigrokdecode)
222 # Don't do parallel Python builds, this doesn't seem to work well.
223 cd Python-$VER_PYTHON
226 patch -p1 < ../../Python-$VER_PYTHON.patch
227 ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
228 sed -i "s/^#zlib/zlib/g" Modules/Setup
229 sed -i "s/^#math/math/g" Modules/Setup
230 sed -i "s/^#time/time/g" Modules/Setup
231 sed -i "s/^#_struct/_struct/g" Modules/Setup
232 make PYTHON_FOR_BUILD='_PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) ./hostpython' install $V
235 # libiconv (needed for glib)
236 $WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
237 tar xfz libiconv-$VER_LIBICONV.tar.gz
238 cd libiconv-$VER_LIBICONV
239 cp -f ../config/config.guess build-aux
240 cp -f ../config/config.sub build-aux
241 cp -f ../config/config.guess libcharset/build-aux
242 cp -f ../config/config.sub libcharset/build-aux
243 ./configure $C --enable-shared
244 make lib/localcharset.h $V
252 test -d $PREFIX/include || mkdir $PREFIX/include
253 cp include/iconv.h.inst $PREFIX/include/iconv.h
256 # gettext (needed for glib)
257 $WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
258 tar xfz gettext-$VER_GETTEXT.tar.gz
259 cd gettext-$VER_GETTEXT
260 ./configure $C --enable-shared --disable-libasprintf
266 # zlib (needed for glib and libzip)
267 $WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
268 tar xfz zlib-$VER_ZLIB.tar.gz
270 # Note: zlib's configure doesn't understand --host, we need to pass $CC.
271 CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT" ./configure --prefix=$PREFIX
276 # pcre (needed for glib)
277 $WGET https://ftp.pcre.org/pub/pcre/pcre-$VER_PCRE.tar.gz
278 tar xfz pcre-$VER_PCRE.tar.gz
280 ./configure $C --disable-cpp --enable-utf --enable-unicode-properties
285 # libffi (needed for glib)
286 $WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
287 tar xfz libffi-$VER_LIBFFI.tar.gz
288 cd libffi-$VER_LIBFFI
294 # glib (needed for libsigrok)
295 $WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
296 tar xfJ glib-$VER_GLIB.tar.xz
298 NOCONFIGURE=yes ./autogen.sh
299 # Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
300 LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
305 # libzip (needed for libsigrok)
306 $WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
307 tar xfz libzip-$VER_LIBZIP.tar.gz
308 cd libzip-$VER_LIBZIP
309 cp -f ../config/config.guess .
310 cp -f ../config/config.sub .
316 # libusb-1.0 (needed for libsigrok)
317 $WGET http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB/libusb-$VER_LIBUSB.tar.bz2
318 tar xfj libusb-$VER_LIBUSB.tar.bz2
319 cd libusb-$VER_LIBUSB
320 patch -p1 < ../../libusb-1.0.patch
321 ./configure $C --disable-udev
326 # libftdi1 (needed for libsigrok)
327 $WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2
328 tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2
329 cd libftdi1-$VER_LIBFTDI1
330 cmake $CM -DFTDIPP=no -DDOCUMENTATION=no -DEXAMPLES=no -DFTDI_EEPROM=no -DPYTHON_BINDINGS=no -DBUILD_TESTS=n .
336 $GIT_CLONE $REPO_BASE/libserialport
346 # Build dependencies for libsigrok bindings if needed
348 if [ x"$CPPFLAGS_STL" != x ]; then
350 # libsigc++ (needed for glibmm)
351 $WGET http://ftp.gnome.org/pub/gnome/sources/libsigc++/$VER_LIBSIGCXX_SHORT/libsigc++-$VER_LIBSIGCXX.tar.xz
352 tar xfJ libsigc++-$VER_LIBSIGCXX.tar.xz
353 cd libsigc++-$VER_LIBSIGCXX
354 cp -f ../config/config.guess build
355 cp -f ../config/config.sub build
356 CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
361 # glibmm (needed for libsigrok bindings)
362 $WGET http://ftp.gnome.org/pub/gnome/sources/glibmm/$VER_GLIBMM_SHORT/glibmm-$VER_GLIBMM.tar.xz
363 tar xfJ glibmm-$VER_GLIBMM.tar.xz
364 cd glibmm-$VER_GLIBMM
365 CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
373 $GIT_CLONE $REPO_BASE/libsigrok
378 CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL" JAVAC="javac -source 1.6 -target 1.6" ../configure $C $BINDINGS_CONFIG --datadir=/sdcard
380 make datadir='$(datarootdir)' install $V
384 $GIT_CLONE $REPO_BASE/libsigrokdecode
395 $GIT_CLONE $REPO_BASE/sigrok-firmware
405 # sigrok-firmware-fx2lafw
406 $WGET http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW.tar.gz
407 tar xfz sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW.tar.gz
408 cd sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW
409 cp *.fw $PREFIX/share/sigrok-firmware/
413 $GIT_CLONE $REPO_BASE/sigrok-cli
423 # Check if we have all requirements to build PulseView:
425 if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then
426 echo "Android NDK not available, not building PulseView."
430 if [ -z "$ANDROID_SDK" -o ! -d "$ANDROID_SDK"/platforms/android-$VER_AND_API ]; then
431 echo "Android SDK with platform $VER_AND_API not available, not building PulseView."
435 if [ ! -e "${ANDROID_SDK}/tools/android" ]; then
436 echo "Essential Android build tools not available, not building PulseView."
440 NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'`
442 # Boost (needed for PulseView)
443 $WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2
444 tar xfj boost_${VER_BOOST//./_}.tar.bz2
445 cd boost_${VER_BOOST//./_}
446 patch -p0 < ../../boost_wchar.patch
447 CC= ./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system,serialization,test --without-icu
448 echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"$SYSROOT -I$PREFIX/include $CPPFLAGS_STL\" <linkflags>\"$SYSROOT -L$PREFIX/lib $LDFLAGS_STL -lgnustl_shared\" ;" > user-config.jam
449 ./b2 -q -d+2 --ignore-site-config --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL
452 # Qt (needed for PulseView)
453 $WGET http://download.qt.io/archive/qt/${VER_QT_SHORT}/${VER_QT}/single/qt-everywhere-opensource-src-${VER_QT}.tar.xz
454 tar xfi qt-everywhere-opensource-src-${VER_QT}.tar.xz
455 cd qt-everywhere-opensource-src-${VER_QT}
456 patch -p1 < ../../android-qt.patch
457 CC= CXX= ./configure \
460 -xplatform android-g++ \
463 -android-sdk "$ANDROID_SDK" \
464 -android-ndk "$ANDROID_NDK" \
465 -android-ndk-host "$NDK_HOST" \
466 -android-arch "$TARGET_ARCH" \
467 -android-toolchain-version "$NDK_TOOLCHAIN_VERSION" \
468 -skip qtconnectivity \
476 -skip qtxmlpatterns \
477 -opensource -confirm-license -silent -no-warnings-are-errors
478 export ANDROID_API_VERSION=android-$VER_AND_API
479 export ANDROID_BUILD_TOOLS_REVISION=$VER_AND_BT
480 make module-qtbase module-qtandroidextras module-qtsvg module-qtimageformats module-qttranslations $PARALLEL $V
484 # sigrok-androidutils
485 $GIT_CLONE $REPO_BASE/sigrok-androidutils
486 cd sigrok-androidutils
488 ./configure $C --with-android-sdk="${ANDROID_SDK}" --with-android-platform=android-$VER_AND_API
493 # Strip all shared libs to reduce size.
494 find $PREFIX -iname "*.so" -exec ${TOOLCHAIN_TRIPLET}-strip -S {} \;
497 $GIT_CLONE $REPO_BASE/pulseview
499 patch -p1 < ../../pv_cmake_pkgconfig_fix.patch
500 sed -i -e "s,\t\tandroid:versionName=.*$,\t\tandroid:versionName=\"`date -Iseconds`\"," android/AndroidManifest.xml
501 cmake $CM -DENABLE_TESTS=y .
503 ${TOOLCHAIN_TRIPLET}-strip -S libs/$TARGET_ARCH/libpulseview.so
505 "${ANDROID_SDK}/tools/android" update project -p . -t android-$VER_AND_API -n PulseView