]>
Commit | Line | Data |
---|---|---|
ab2ccf3d | 1 | #!/bin/sh |
50f0dffc UH |
2 | ## |
3 | ## This file is part of the sigrok-util project. | |
4 | ## | |
5 | ## Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | ## | |
7 | ## This program is free software; you can redistribute it and/or modify | |
8 | ## it under the terms of the GNU General Public License as published by | |
9 | ## the Free Software Foundation; either version 2 of the License, or | |
10 | ## (at your option) any later version. | |
11 | ## | |
12 | ## This program is distributed in the hope that it will be useful, | |
13 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | ## GNU General Public License for more details. | |
16 | ## | |
17 | ## You should have received a copy of the GNU General Public License | |
18 | ## along with this program; if not, write to the Free Software | |
19 | ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
20 | ## | |
21 | ||
22 | set -e | |
23 | ||
24 | # Uncomment/set the following to match your cross-toolchain setup. | |
25 | # TOOLCHAIN=... | |
26 | # TOOLCHAIN_TRIPLET=... | |
27 | # C="--host=$TOOLCHAIN_TRIPLET" | |
28 | # export PATH=$TOOLCHAIN/bin:$PATH | |
29 | ||
30 | # The path where the compiled packages will be installed. | |
31 | PREFIX=$HOME/sr | |
32 | ||
33 | # The path where to download files to and where to build packages. | |
07947dda | 34 | BUILDDIR=./build |
50f0dffc | 35 | |
91036110 UH |
36 | # The path where the libsigrok Python bindings will be installed. |
37 | PYPATH=$PREFIX/lib/python2.7/site-packages | |
38 | ||
cabab8f7 | 39 | # Edit this to control verbose build output. |
a58f6b98 | 40 | # V="V=1 VERBOSE=1" |
cabab8f7 | 41 | |
50f0dffc UH |
42 | # Edit this to enable/disable/modify parallel compiles. |
43 | PARALLEL="-j 2" | |
44 | ||
3ed306f8 UH |
45 | # Uncomment the following lines to build with clang and run scan-build. |
46 | # export CC=clang | |
47 | # export CXX=clang++ | |
48 | # SB="scan-build -k -v" | |
49 | ||
50f0dffc UH |
50 | # You usually don't need to change anything below this line. |
51 | ||
52 | # ----------------------------------------------------------------------------- | |
53 | ||
54 | P="$PREFIX/lib/pkgconfig" | |
55 | C="$C --prefix=$PREFIX" | |
56 | ||
57 | # Remove build directory contents (if any) and create a new build dir. | |
58 | rm -rf $BUILDDIR | |
59 | mkdir $BUILDDIR | |
60 | cd $BUILDDIR | |
61 | ||
a51ca6bd UH |
62 | GIT_CLONE="git clone --depth=1" |
63 | ||
50f0dffc UH |
64 | # ----------------------------------------------------------------------------- |
65 | ||
66 | # libserialport | |
a51ca6bd | 67 | $GIT_CLONE git://sigrok.org/libserialport |
50f0dffc UH |
68 | cd libserialport |
69 | ./autogen.sh | |
4ff67f5a UH |
70 | mkdir build |
71 | cd build | |
72 | ../configure $C | |
cabab8f7 UJ |
73 | $SB make $PARALLEL $V |
74 | make install $V | |
4ff67f5a | 75 | cd ../.. |
50f0dffc UH |
76 | |
77 | # libsigrok | |
91036110 | 78 | mkdir -p $PYPATH |
a51ca6bd | 79 | $GIT_CLONE git://sigrok.org/libsigrok |
50f0dffc UH |
80 | cd libsigrok |
81 | ./autogen.sh | |
4ff67f5a UH |
82 | mkdir build |
83 | cd build | |
84 | PKG_CONFIG_PATH=$P ../configure $C | |
cabab8f7 UJ |
85 | $SB make $PARALLEL $V |
86 | PYTHONPATH=$PYPATH $SB make install $V | |
87 | $SB make check $V | |
4ff67f5a | 88 | cd ../.. |
50f0dffc UH |
89 | |
90 | # libsigrokdecode | |
a51ca6bd | 91 | $GIT_CLONE git://sigrok.org/libsigrokdecode |
50f0dffc UH |
92 | cd libsigrokdecode |
93 | ./autogen.sh | |
4ff67f5a UH |
94 | mkdir build |
95 | cd build | |
96 | PKG_CONFIG_PATH=$P ../configure $C | |
cabab8f7 UJ |
97 | $SB make $PARALLEL $V |
98 | make install $V | |
99 | $SB make check $V | |
4ff67f5a | 100 | cd ../.. |
50f0dffc UH |
101 | |
102 | # sigrok-firmware | |
a51ca6bd | 103 | $GIT_CLONE git://sigrok.org/sigrok-firmware |
50f0dffc UH |
104 | cd sigrok-firmware |
105 | ./autogen.sh | |
4ff67f5a UH |
106 | mkdir build |
107 | cd build | |
50f0dffc | 108 | # Nothing gets cross-compiled here, we just need 'make install' basically. |
4ff67f5a | 109 | ../configure $C |
cabab8f7 | 110 | make install $V |
4ff67f5a | 111 | cd ../.. |
50f0dffc UH |
112 | |
113 | # sigrok-firmware-fx2lafw | |
a51ca6bd | 114 | $GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw |
50f0dffc UH |
115 | cd sigrok-firmware-fx2lafw |
116 | ./autogen.sh | |
4ff67f5a UH |
117 | mkdir build |
118 | cd build | |
50f0dffc | 119 | # We're building the fx2lafw firmware on the host, no need to cross-compile. |
4ff67f5a | 120 | ../configure $C |
cabab8f7 UJ |
121 | make $PARALLEL $V |
122 | make install $V | |
4ff67f5a | 123 | cd ../.. |
50f0dffc UH |
124 | |
125 | # sigrok-cli | |
a51ca6bd | 126 | $GIT_CLONE git://sigrok.org/sigrok-cli |
50f0dffc UH |
127 | cd sigrok-cli |
128 | ./autogen.sh | |
4ff67f5a UH |
129 | mkdir build |
130 | cd build | |
131 | PKG_CONFIG_PATH=$P ../configure $C | |
cabab8f7 UJ |
132 | $SB make $PARALLEL $V |
133 | make install $V | |
4ff67f5a | 134 | cd ../.. |
50f0dffc UH |
135 | |
136 | # PulseView | |
a51ca6bd | 137 | $GIT_CLONE git://sigrok.org/pulseview |
50f0dffc | 138 | cd pulseview |
4ff67f5a UH |
139 | mkdir build |
140 | cd build | |
3ed306f8 | 141 | PKG_CONFIG_PATH=$P $SB cmake -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y .. |
cabab8f7 UJ |
142 | $SB make $PARALLEL $V |
143 | make install $V | |
144 | $SB make test $V | |
4ff67f5a | 145 | cd ../.. |