Bug 558 - Scanning for Rigol DS1052E yields unhandled exception (PV shutdown): Caught exception: not applicable
Summary: Scanning for Rigol DS1052E yields unhandled exception (PV shutdown): Caught e...
Status: RESOLVED FIXED
Alias: None
Product: PulseView
Classification: Unclassified
Component: Acquisition (show other bugs)
Version: unreleased development snapshot
Hardware: All All
: Normal normal
Target Milestone: ---
Assignee: Nobody
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2015-02-13 16:30 CET by Uwe Hermann
Modified: 2015-02-14 19:36 CET (History)
0 users


Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.
Description Uwe Hermann 2015-02-13 16:30:09 CET 
This could be an issue in libsigrok or libsigrokcxx or PulseView, unclear yet. Filing for PulseView since it shuts down (and sigrok-cli works fine).


sr: libsigrok loglevel set to 5.
srd: libsigrokdecode loglevel set to 5.
sr: backend: Sanity-checking all drivers.
sr: backend: Sanity-checking all input modules.
sr: backend: Sanity-checking all output modules.
sr: backend: Sanity-checking all transform modules.
srd: Initializing libsigrokdecode.
srd: Adding '/home/uwe/sr/share/libsigrokdecode/decoders' to module path.
srd: Loading protocol decoder 'i2s'.
[...]
srd: Loading protocol decoder 'rgb_led_spi'.
sr: hwdriver: Initializing driver 'agilent-dmm'.
sr: hwdriver: Initializing driver 'hameg-hmo'.
[...]
sr: scpi_usbtmc: Found USBTMC device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Found 1 device(s).
sr: scpi: Opening USBTMC device usbtmc/1.9.
sr: usb: Trying to find USB device with bus.address = 1.9.
sr: usb: Found USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: usb: Found 1 device(s).
sr: usb: Trying to open USB device 1.9.
sr: usb: Opened USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Interface 0 configuration 1.
sr: scpi_usbtmc: Bulk OUT EP 1
sr: scpi_usbtmc: Bulk IN EP 2
sr: scpi_usbtmc: Interrupt EP 3
sr: scpi_usbtmc: Device capabilities: SCPI, TermChar, L4, T6, SR1, RL1, DT1
sr: scpi_usbtmc: Successfully sent SCPI command: '*IDN?'.
sr: scpi: Got response: 'Rigol Technologies,DS1102E,DS1EB121202472,00.02.02.02.00', length 56.
sr: scpi: Got IDN string: 'Rigol Technologies,DS1102E,DS1EB121202472,00.02.02.02.00'
sr: hwdriver: Scan of 'hameg-hmo' found 0 devices.
[...]
sr: hwdriver: Initializing driver 'rigol-ds'.
sr: scpi_usbtmc: Found USBTMC device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Found 1 device(s).
sr: scpi: Opening USBTMC device usbtmc/1.9.
sr: usb: Trying to find USB device with bus.address = 1.9.
sr: usb: Found USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: usb: Found 1 device(s).
sr: usb: Trying to open USB device 1.9.
sr: usb: Opened USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Interface 0 configuration 1.
sr: scpi_usbtmc: Bulk OUT EP 1
sr: scpi_usbtmc: Bulk IN EP 2
sr: scpi_usbtmc: Interrupt EP 3
sr: scpi_usbtmc: Device capabilities: SCPI, TermChar, L4, T6, SR1, RL1, DT1
sr: scpi_usbtmc: Successfully sent SCPI command: '*IDN?'.
sr: scpi: Got response: 'Rigol Technologies,DS1102E,DS1EB121202472,00.02.02.02.00', length 56.
sr: scpi: Got IDN string: 'Rigol Technologies,DS1102E,DS1EB121202472,00.02.02.02.00'
sr: rigol-ds: Found DS1000 firmware < 0.2.4, using raw data format.
sr: hwdriver: Scan of 'rigol-ds' found 1 devices.
sr: hwdriver: Initializing driver 'saleae-logic16'.
sr: hwdriver: Scan of 'saleae-logic16' found 0 devices.
sr: hwdriver: Initializing driver 'scpi-pps'.
sr: scpi_usbtmc: Found USBTMC device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Found 1 device(s).
sr: scpi: Opening USBTMC device usbtmc/1.9.
sr: usb: Trying to find USB device with bus.address = 1.9.
sr: usb: Found USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: usb: Found 1 device(s).
sr: usb: Trying to open USB device 1.9.
sr: usb: Opened USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Interface 0 configuration 1.
sr: scpi_usbtmc: Bulk OUT EP 1
sr: scpi_usbtmc: Bulk IN EP 2
sr: scpi_usbtmc: Interrupt EP 3
sr: scpi_usbtmc: Failed to set configuration: LIBUSB_ERROR_BUSY.
sr: scpi: Couldn't open SCPI device.
sr: hwdriver: Scan of 'scpi-pps' found 0 devices.
sr: hwdriver: Initializing driver 'siemens-b102x'.
sr: hwdriver: Scan of 'siemens-b102x' found 0 devices.
[...]
sr: hwdriver: Initializing driver 'yokogawa-dlm'.
sr: scpi_usbtmc: Found USBTMC device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Found 1 device(s).
sr: scpi: Opening USBTMC device usbtmc/1.9.
sr: usb: Trying to find USB device with bus.address = 1.9.
sr: usb: Found USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: usb: Found 1 device(s).
sr: usb: Trying to open USB device 1.9.
sr: usb: Opened USB device (VID:PID = 1ab1:0588, bus.address = 1.9).
sr: scpi_usbtmc: Interface 0 configuration 1.
sr: scpi_usbtmc: Bulk OUT EP 1
sr: scpi_usbtmc: Bulk IN EP 2
sr: scpi_usbtmc: Interrupt EP 3
sr: scpi_usbtmc: Failed to set configuration: LIBUSB_ERROR_BUSY.
sr: scpi: Couldn't open SCPI device.
sr: hwdriver: Scan of 'yokogawa-dlm' found 0 devices.
sr: hwdriver: Initializing driver 'zeroplus-logic-cube'.
sr: hwdriver: Scan of 'zeroplus-logic-cube' found 0 devices.
sr: hwdriver: sr_config_list(): key 30002 (pattern) sdi 0xfa4430 cg A0
sr: hwdriver: sr_config_get(): key 30002 (pattern) sdi 0xfa4430 cg A0
sr: hwdriver: sr_config_list(): key 30002 (pattern) sdi 0xfa4430 cg A1
sr: hwdriver: sr_config_get(): key 30002 (pattern) sdi 0xfa4430 cg A1
sr: hwdriver: sr_config_list(): key 30002 (pattern) sdi 0xfa4430 cg A2
sr: hwdriver: sr_config_get(): key 30002 (pattern) sdi 0xfa4430 cg A2
sr: hwdriver: sr_config_list(): key 30002 (pattern) sdi 0xfa4430 cg A3
sr: hwdriver: sr_config_get(): key 30002 (pattern) sdi 0xfa4430 cg A3
sr: hwdriver: sr_config_list(): key 30002 (pattern) sdi 0xfa4430 cg Analog
sr: hwdriver: sr_config_get(): key 30002 (pattern) sdi 0xfa4430 cg Analog
sr: hwdriver: sr_config_list(): key 30002 (pattern) sdi 0xfa4430 cg Logic
sr: hwdriver: sr_config_get(): key 30002 (pattern) sdi 0xfa4430 cg Logic
sr: hwdriver: sr_config_get(): key 50001 (limit_samples) sdi 0xfa4430 cg NULL
sr: hwdriver: sr_config_list(): key 30000 (samplerate) sdi 0xfa4430 cg NULL
sr: hwdriver: sr_config_get(): key 30000 (samplerate) sdi 0xfa4430 cg NULL
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN1:DISP?'.
sr: scpi: Got response: 'ON', length 2.
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN2:DISP?'.
sr: scpi: Got response: 'ON', length 2.
sr: rigol-ds: Current analog channel state:
sr: rigol-ds: CH1 on
sr: rigol-ds: CH2 on
sr: scpi_usbtmc: Successfully sent SCPI command: ':TIM:SCAL?'.
sr: scpi: Got response: '5.000e-04', length 9.
sr: rigol-ds: Current timebase 0.0005
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN1:SCAL?'.
sr: scpi: Got response: '2.000e+01', length 9.
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN2:SCAL?'.
sr: scpi: Got response: '2.000e+01', length 9.
sr: rigol-ds: Current vertical gain:
sr: rigol-ds: CH1 20
sr: rigol-ds: CH2 20
sr: rigol-ds: Current vertical reference:
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN1:OFFS?'.
sr: scpi: Got response: '4.000e+01', length 9.
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN2:OFFS?'.
sr: scpi: Got response: '-4.160e+01', length 10.
sr: rigol-ds: Current vertical offset:
sr: rigol-ds: CH1 40
sr: rigol-ds: CH2 -41.6
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN1:COUP?'.
sr: scpi: Got response: 'DC', length 2.
sr: scpi_usbtmc: Successfully sent SCPI command: ':CHAN2:COUP?'.
sr: scpi: Got response: 'DC', length 2.
sr: rigol-ds: Current coupling:
sr: rigol-ds: CH1 DC
sr: rigol-ds: CH2 DC
sr: scpi_usbtmc: Successfully sent SCPI command: ':TRIG:EDGE:SOUR?'.
sr: scpi: Got response: 'CH1', length 3.
sr: rigol-ds: Current trigger source CH1
sr: scpi_usbtmc: Successfully sent SCPI command: ':TIM:OFFS?'.
sr: scpi: Got response: '0.000e+00', length 9.
sr: rigol-ds: Current horizontal trigger position 0
sr: scpi_usbtmc: Successfully sent SCPI command: ':TRIG:EDGE:SLOP?'.
sr: scpi: Got response: 'POSITIVE', length 8.
sr: rigol-ds: Current trigger slope POSITIVE
sr: hwdriver: sr_config_list(): key 30010 (timebase) sdi 0x1093870 cg NULL
sr: hwdriver: sr_config_list(): key 30007 (triggersource) sdi 0x1093870 cg NULL
sr: hwdriver: sr_config_list(): key 30004 (triggerslope) sdi 0x1093870 cg NULL
sr: hwdriver: sr_config_get(): key 30010 (timebase) sdi 0x1093870 cg NULL
sr: hwdriver: sr_config_get(): key 30007 (triggersource) sdi 0x1093870 cg NULL
sr: hwdriver: sr_config_get(): key 30004 (triggerslope) sdi 0x1093870 cg NULL
Caught exception: not applicable
srd: Exiting libsigrokdecode.
srd: Unloading protocol decoder 'I²S'.
[...]
srd: Unloading protocol decoder 'RGB LED (SPI)'.
sr: scpi_usbtmc: Successfully sent SCPI command: ':KEY:LOCK DISABLE'.
sr: rigol-ds: delay 100ms
Comment 1 Uwe Hermann 2015-02-14 19:36:02 CET 
Fixed in d5c4144e2cd5129da947277c24b699066d0bec72, thanks!