Created attachment 794 [details] Mockup of the requested change in the time notation of pulseview Overview: At the top of the Pulseview window, the relative time from the zero point is displayed. I would like to be able to switch between relative time from the zero point and the wall time, so I don't have to remember when I started a capture, and perform that calculation myself. Steps to Reproduce: 1) Start Pulseview 2) Right-click on the strip with +100ms, +200ms and so on. Actual Results: A drop down menu shows up with the following options: "Create Marker here", "Set as Zero point", and "Disable mouse hover marker" Expected Results: I would like to also have the option "Switch to wall time", and then see the system time at the time the sample is taken at the top. When right-clicking again, the option "Switch to relative time" can be used to return to the relative time (0 for the first sample, +100ms, +200msec and so on) again. Build Date & Hardware: I build it myself on 04/15/2023 on a 64 bit AMD machine. PulseView 0.5.0-git-62c0968 libsigrok 0.6.0-git/4:0:0 (rt: 0.6.0-git-5bce22ac/4:0:0) Kernel version: $ uname -a Linux cedric 6.2.11-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 13 Apr 2023 16:59:24 +0000 x86_64 GNU/Linux Additional Builds and Platforms: Not tested Additional Information: See the attached screenshot for a mockup of the wanted changes